|
| 1 | Civil WorksRCC of M-25 grade (equivalent to a nominal mix of proportion 1:1.5:3) as per approved designs and drawings having a minimum compressive strength (in work test) of 200kg/cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12mm to 20mm size black hard crusher broken granite chips (20mm size chips not to exceed 25%) and screened and washed sharp sand for mortar of approved quality from approved qarry to be mixed in concrete mixture including hoisting, lowering, laying and compacting concerete by using vibrators, watering and curing for 28 days, centring and shuttering then after dismantling and removing debries from the work site and finishing the exposed surface smooth including cost, conveyance, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete but excluding cost and conveyance of M.S. rods or Tor steel and binding wires of 18 to 20 guage and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper position in all floors as directed by the Engineer in Charge. Column Superstructure First floor |
| 2 | Lintel First floor |
| 3 | Roof Beam First floor |
| 4 | Roof Slab First floor |
| 5 | Chajja First floor |
| 6 | Supplying, cutting, straightening coiled or bent up M.S. rods or Tor steel of SAIL (HYSD Fe-415) welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for RCC works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer in ChargeFirst floor |
| 7 | Fly Ash Brick Masonary in cement mortar (1:6) in superstructure using Fly Ash bricks of 25cm x 12cm x 8cm size having a crushing not less than 35kg per Sq.Cm, including splays cutting, circular moulding, chamfering, corbelling, watering and curing including cost, conveyance, royalties, taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors. First floor |
| 8 | Supplying, fitting and fixing M.S. Grill made out of structural steel, flats, plates, bars confirming to IS for windows, ventilators etc. as per drawing and design, fixed to walls with clamps including priming 1 coat with all kdamages in walls and floors etc. including cost of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc.as per the direction of the Engineer in Charge.Window |
| 9 | Painting two coats with enamel paint including cost and conveyance of all materials, labour T&P, hire charges of machine, all taxes eto completes in all respects as per the direction of Engineer charges. |
| 10 | Labour for fitting, fixing of MS Shutter & Grill including labour T&P, hire charges of machine, all taxes eto completes in all respects as per the direction of Engineer charges. |
| 11 | Supplying & fitting-fixing up of Un-Plasticised Poly Vinyl Choloride (UPVC) (FENESTA) INCL VERA LTD) Casement Door 60 Series dully manufactured proofing of 80mmx55 mm x2.5mm for outer fframes 102mmx80mmx2 25mm for casement door sash profile and 74mm x60 mmx2.5 mulion profile capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness 2.0mm prefabricated and welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fitted with EPDM weathering seal resistant accessories like cliping locking system made of aluminium 1 No per set of sashes and the system is to be installed at the site using anchor fasteners, silicon, rubber sealant easy glazings Ideglazing at site etc including cost and conveyance of all materials accessories, labour charges, materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards. |
| 12 | Supplying & fitting - fixing up of Un-Plasticised Poly Vinyl Choloride (UPVC) (FENESTA) /NCL VEKA LTD) Three-Track-Three Pannel Sliding Windows -60-Series dully manufactured proofing of 108mmx45 mm x2.5mm for outer frames and window sash of 39mm x58mm x 2.5 mm capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness 1.5 mm prefabricated and welded through fusion welding the window shall be fitted with 6mm thick clear toughened glass of SAINT-GOBIN make duly fitted with EPDM weathering seal resistant and the system is to be installed using Reinforced Large coupler at the site using anchor fasteners, silicon, rubber sealant easy glazings /deglazing at site etc including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards. |
| 13 | Providing 6mm thick Cement Plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge |
| 14 | Providing 12mm thick Cement Plaster (1:6) on the rough surface/ plumbed surface of masonry racking out of joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge. |
| 15 | Providing 16mm thick Cement Plaster (1:6) on the rough surface of masonry walls for all floors including racking and joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge |
| 16 | Supplying, fitting and fixing vitrified tile 60x120cm Plain Ivory 8 to 10 mm thick in floors of approved make confirming to IS: 13755 laid on 20mm thick C.M (1:4) & filling joints with white cement of approved quality including cost of all materials |
| 17 | Fixing tiles of vitrified 60x120cm of plain ivory in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. complete as per direction of Engineer-ln-Charge at all floors and all heights. First Floor |
| 18 | Painting 1 coat with approved primer to wall including cost, conveyance, taxes of all materials paint labour T&P etc. complete in all respect. Ground floor |
| 19 | Finishing wall surface with acrylic wall putty (water based) of approved make and finished smooth to receive painting including cost of scaffolding, staging charges with cost & conveyance of all materials taxes labour T&P erc. Complete as directed by Engineer in Charge. First floor |
| 20 | Wall painting two coats with plastic emulsion paint of approved shade on new work to give and even shade including cost, conveyance, taxes of all materials paint labour T&P etc. complete in all respect. First floor |
| 21 | Wall painting two coats with weather seal coat paint of approved shade on new work to give and even shade including cost, conveyance, taxes of all materials paint labour T&P etc. complete in all respect. First floor |
| 22 | 2.5cm (1 inch) thick grading concrete with cement (1:2:2) using 6mm & down graded size over roof slab to proper slope finished smooth, watering and curing including cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. Ground floor |
| 23 | First floor |
| 24 | E.I. WorksRecessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 6 Amp, 250 V modular switch ISI marked and ceiling rose ISI marked, mounted on modular GI box with modular base & cover of suitable size , MS box with 1.5 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire:-Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI )Group-B |
| 25 | Group-C |
| 26 | Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc as required. ( Make of wire:-Finolex/Anchor/ Polycab/HAVELLS/RR KABLE/KEI ) |
| 27 | Recessed wiring for light / power plug with 2 x 2.5 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 1.5 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor for loop earthing as required.( Make of wire:-Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI ) |
| 28 | Recessed wiring for light / power plug with 2 x 4 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 2.5 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor for loop earthing as required. ( Make of wire:-Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI ) |
| 29 | Recessed wiring for light / power plug with 4 x 4 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing as required. ( Make of wire:-Finolex/Anchor/ Polycab/HAVELLS/RR KABLE/KEI ) |
| 30 | Recessed wiring to submain in FRLS/HFFR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with FRLS/HFFR PVC insulated single core multistrand copper conductor as earth wire as equired.( Make of wire:-Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI )2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 31 | 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 32 | 2 x 6 sq.mm + 1 x 2.5 sq.mm |
| 33 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 34 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 35 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way double door |
| 36 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 37 | Double pole |
| 38 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 39 | Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 amps \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 40 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with CI/MS cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required. |
| 41 | Extra for using salt and charcoal for G.I or copper plate earth as required |
| 42 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 43 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 44 | Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required. |
| 45 | Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required. |
| 46 | Providing and fixing of earth bus of 50 mm x 5 mm copper strip ISI marked on surface for connection etc as required. |
| 47 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 48 | Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of 25W (2'x2') 595mmx595mmx70mm and system lumens output not less than 3250 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5 years. |
| 49 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.(With fan Regulator) |
| 50 | Supply, installation, testing and commissioning of wall / floor / wall-cum-floor mounted compartmentalized CPRI approved indoor type cubicle panel of suitable size but depth not less than 300 mm deep, made of 2 mm thick, suitable for 415 Volt, 3 phase, 4 wire, 50 Hz AC supply with 3 mm thick CRCA sheet detachable gland plate, cable alley, including supply and fixing following mountings and accessories in the panel board, connection, interconnections with adequate size copper conductor single core cables / wires or solid aluminium bars of suitable size including powder coating in approved shade after cleaning and finishing in 7 tank process etc. complete as required.(as per approved drawing by competent authority) Workshop Paneli)100A 4P 36KA MCCB with Thermal Release having Inbuilt O/L, S/C Protections with spreader link & ROH & other accessories - 01 No(Incoming)ii.1 No 200 A TPN aluminiumbus bar in separate bus section with heat shrinkable coloured sleeves including DMC / SMC bus bar supports at required intervals for complete cross section etc. with sealing arrangementiii. 32A DP MCB, 10KA - 6 No (Outgoing)iv. 32A FP MCB - 06 No (Outgoing) |
| 51 | Main Paneli)250A 4P 36KA MCCB with Thermal Release having Inbuilt O/L, S/C Protections with spreader link & ROH & other accessories - 01 No (Incoming)ii.1 No 400 A TPN aluminiumbus bar in separate bus section with heat shrinkable coloured sleeves including DMC / SMC bus bar supports at required intervals for complete cross section etc. with sealing arrangementiii)100A 4P 36KA MCCB with Thermal Release having Inbuilt O/L, S/C Protections with spreader link & ROH & other accessories - 04 No(Outgoing) |
| 52 | P.H. WorksProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C-PVC pipe SDR-11First Floor |
| 53 | 25mm dia C-PVC pipe SDR-11Ground Floor |
| 54 | First Floor |
| 55 | 32mm dia C-PVC pipe SDR-11First Floor |
| 56 | Second Floor |
| 57 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Jaquar)CON-CHR-059KN |
| 58 | 15mm dia CP Bib cock (Con-CHR-047KN Jaquar make) |
| 59 | 15mm dia CP Long body Bib cock (Con-CHR-107KN Jaquar make) |
| 60 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 61 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 62 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 63 | 25mm dia brass full way valve (Shakti make) |
| 64 | 32mm dia brass full way valve (Shakti make) |
| 65 | 15mm CP Extension piece |
| 66 | 125mm CP grating |
| 67 | 15mm size C.P. flange |
| 68 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank roof of 3rd Floor |
| 69 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.First Floor |
| 70 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-chargeFirst Floor |
| 71 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.First Floor |
| 72 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 73 | 80mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 74 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 75 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 76 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 77 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 78 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 79 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 80 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 81 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 82 | 75mm U-PVC plain bend(Ori Plast/Finolex/Supreme Make) |
| 83 | 75mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 84 | 75x75x75mm U-PVC double equal door Tee(Ori Plast/Finolex/Supreme Make) |
| 85 | 75mm U-PVC vent cowl(Ori Plast/Finolex/Supreme Make) |
| 86 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 87 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeEuropean water closet with 'S' trap plain(Hindware/Parryware/Neycer make) |
| 88 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 89 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) |
| 90 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge20mm x 600mm long CP towel rail |
| 91 | Towel Ring |
| 92 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 93 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf with CP/NP guard rails. |
| 94 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror (swivelled type) |
| 95 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 96 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 97 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeFirst Floor |
| 98 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx60cmFirst Floor |
| 99 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.First Floor |
| 100 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx30cmFirst Floor |
| 101 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 |
| 102 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) |
| 103 | DOL Control panel |
| 104 | 40mm dia steel short piece |
| 105 | 2.50sqmm flat cable |
| 106 | Steel rope with cover Please Enable Macros to View BoQ information |
