|
| 1 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.....(INo46-15, PgNo 296) (STATE SSR)Item Spec: (As directed by Engineer in charge.) |
| 2 | Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete(INo46-29, PgNo 297) (STATE SSR Spec: (As directed by Engineer in charge.) |
| 3 | Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete.....(INo46-09, PgNo 296) (STATE SSR)Item Spec: (As directed by Engineer in charge.) |
| 4 | Removing mud plaster including disposing of the spoils as direct-ed with all leads, lifts etc. complete.....(INo46-23, PgNo 297) (STATE SSR)Item Spec: (As directed by Engineer in charge.) |
| 5 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete....(INo27-05, PgNo 197) (STATE SSR) Item Spec: (Bd.G.5 Page No. 315) |
| 6 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete..... |
| 7 | Providing internal cement plaster 20mm. thick in single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.....(INo32-08, PgNo 209) (STATE SSR)Item Spec: (Bd.L.4 Page No. 368) |
| 8 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.....(INo40-02, PgNo 264) (STATE SSR) Item Spec: (Bd.U.1 Page No. 537) |
| 9 | Providing and fixing in position (as per 1868/1982) Aluminium sliding window of three tracks with rectangular pipe 95 * 38.1 * 0.9 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 * 31.75 * 1.3 mm at weight 1.070 kg/Rmt.. Top and side track section 92 * 31.75x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 * 18 * 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 * 18 * 1.1 mm at weight 0.469 kg/Rmt. and handle and top section 40 * 18 * 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box....(INo39-42, PgNo 253) (STATE SSR) Item Spec: (As directed by engineer-in-charge.) |
| 10 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.....(INo33-68, PgNo 220) (STATE SSR)Item Spec: (As directed by Engineer-In- Charge) |
| 11 | Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete....(INo42-51, PgNo 279) (STATE SSR)Item Spec: (As directed by Engineer in charge.) |
| 12 | Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Raincoat with the help of brush and as per instructions and specification given by manufacturer and with instruction from Engineer in-charge. Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamp paper of Rs. 500/- and necessary testing etc. complete..... (INo35-29, PgNo 226) (STATE SSR )Item Spec: (As directed by Engineer in charge. |
| 13 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.....(INo35-14, PgNo 224) (STATE SSR)Item Spec: (As directed by Engineer- in-charge.) |
| 14 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.....(INo36-14, PgNo 228) (STATE SSR )Item Spec: (Bd.P.6 Page No. 414 & Pre-approval of Superintending Engineer) |
| 15 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. ....(INo31-04, PgNo 205) (STATE SSR) Item Spec: (As directed by Engineer in charge.) |
| 16 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc)....(INo25-50, PgNo 181) (STATE SSR)Item Spec: (Bd.F.6 Page No. 300 and B.7, Page No.38) |
| 17 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc)....(INo26-23, PgNo 185) (STATE SSR) Item Spec: (Bd. F. 12 Page No. 304 & B-7, Pg 38) |
| 18 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.....(INo26-33, PgNo 188) (STATE SSR) Item Spec: (Bd.F.17, Page No. 306) |
| 19 | Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.....(INo35-09, PgNo 223) ( STATE SSR)Item Spec: (Bd.0.6 Page No. 406) Please Enable Macros to View BoQ information |
