|
| 1 | E/W in Excavation by mechanical means (Hydralic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms] lift up to 1.5m including getting out of the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m (All kind of soil DSR 2.8.1 |
| 2 | 1:5:10( 1 cement : 5 Course sand zone-III) derived from natural sources : 10 graded stone agregate 40mm nominal size derived from natural sources DSR 4.1.10 |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth leval upto floor V leval inn all shapes and sizes in (Cement mortar 1%4) (1 Cement : 4 course Sand) DSR 6.4.1 |
| 4 | Reinforced cement concrete work beams, suspended floors, roofs having slope upto 15\\" landing balconies, shelves, chajjas, lintel sands, plain window sills, staircases and spiral stair cases above plinth leval floor five leval, execluding the cost of centering shuttering finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 course sand zone -III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources DSR 5.3 |
| 5 | Mild steel iron work for column & beam complete item DSR 5.22.6 |
| 6 | E/W in Cutting or Embankment in Ordainary Soil i/c 2 Km. Cartage from Site PWD SOR 2.1.1 |
| 7 | Kota stone slab flooring over 20mm average) thick laid over and or with grey cement slurry mixed with pigment to match the shade of slab including rubbing and poilishing complete with base of cement mortar 1:4 (1 cement :4 Course Sand )(25mm thick) DSR 1.26.1 |
| 8 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) DSR 13.1.1 |
| 9 | Steel work in built up tubular (round , square or rectangular hollow tubes etc) trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete (Hot finished seamless type tubes) DSR 10.16.2 |
| 10 | Providing & fixing at all heights, levels and locations Mill finishAluminium alloy roofing sheets of alloy IS designation 31500, temperHx8 conforming to IS 737 and dimensions as per IS code 2676 withcharacteristics of good formability and corrosion resistance. Theprofile sheets shall be fixed to truss members in slope or requiredpitch or curvature with Hex cap headed self drilling/tapping Stainlesssteel screws M6, 50 mm long with 3 mm EPDM seal washer etc. allinclusive of labour, scaffolding, T&P and sundries etc. complete asper directions of the Engineer-In-Charge. 0.91mm Aluminium profile with center to center pitch of 175 mm, depth of 46mm, top crest width of 41mm, bottom valley width of 80mm, overall profile width of 1144mm, cover width 1050mm. DSR 12.64.6 |
| 11 | P/Fixing of Standard(heavy quality) stainless steel benches silver for 3 person each PWD SOR 10.28 |
| 12 | Painting steel work with deluxe multi surface paint to give an even shade two or more coat applied @ 1.90ltr/10sqm over an ubder coat of primer applied @ 0.80 ltr/10sqm of approved brand or manufacture DSR 13.48.3 |
| 13 | Supply and fixing of Retro reflective Board incl. all complete item its painting supply of material Labour T&P rtc required for proper completion of work.PWD SOR Ch.24 item No.20 Please Enable Macros to View BoQ information |
