Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premisses complete all as specified and directed. |
| 2 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 3 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level complete all as specified and directed. |
| 4 | M & L 25mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded aggregate) for levelling course in floors complete all as specified and directed. |
| 5 | M & L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed. |
| 6 | M & L for Treating the soil under plinth protection at the rate of 5 litre of emulsion per squre metre of surface area complete all as directed and specified. |
| 7 | M&L for Treatment of soil under existing floors using emulsion @ one ltr per hole 300mm apart including drilling and plugging 12mm dia holes to match the existing floors with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 8 | Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 9 | Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter frome the frame ) complete all as specified and directed. |
| 10 | S & F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fast includ etc,complete all as specified and directed. |
| 11 | S & F 105 x 60 mm size Pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate,hold fast include etc, complete all as specified and directed. |
| 12 | M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks, coping, for fixing holdfast/lugs,filling hollow space of pressed steel door frame etc including necessary form work complete all as specified and directed. |
| 13 | S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and directed. |
| 14 | M & L 2 nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed. |
| 15 | S & F powder coated anodised aluminium frame for windows, ventilators with one or more rebates including aluminium openable shutter for window & joining cleat for fixing etc complete all as specified and directed. |
| 16 | Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads complete all as specified and directed. |
| 17 | M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane complete all as specified and directed. |
| 18 | S & F for galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. |
| 19 | M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finish, complete all as specified and directed. |
| 20 | M&L for Preparation of Old painted surface of Wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed. |
| 21 | S&F for factory made solid PVC door frame of size 50mm x 95 nmm made out of 5mm wood grain printed colour PVC sheet reinforced with ms square tube, with edges will be painted to match with printed sheet complete all as specified and as directed. |
| 22 | S&F for factory made solid panel PVC wood grain printed door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and woodgrain printed PVC sheet used insted of plain colour PVC sheet & 5 mm thick x15mm wide PVC sheet beading used in side stiles and rails and decorative PVC beading of 10mmx10mm (90degree) used instead of exposed portiuon of PVC sheet berading, complete all as specified and as directed. |
| 23 | S & F 100 mm size butt hinges, with galvanised stainless steel hinge wt not less then 100 gm per hinge, anodised and fixed complete all as specified and as directed. |
| 24 | S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete all as specified and directed. |
| 25 | S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete all as specified and directed. |
| 26 | S & F 150 mm size aluminium handles cast type, anodised ISI marked complete all as specified and directed. |
| 27 | S & F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete all as specified and directed. |
| 28 | S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed. |
| 29 | S & F Powder coated aluminium sliding glazed windows with three track sliding shutter(two shutters glazed and one shutter wire mesh with following specification and making good the adjacent side of jambs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.(i) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min)(ii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min)(iii) 4 mm thick glass superior quality.(Min)(iv) IDPE Rubber guasket for fixing of glass.(v) Locking cleats per shutter -01 Nos.(Min)(vi) Sliding rollers per shutter - 02 Nos.(Min)(vii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(viii) fixing screw for frame with wall per windows- 08 Nos. |
| 30 | S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass andstainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 31 | M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 32 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 33 | M&L for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified and directed. |
| 34 | S & F in repair curtain rails 20 mm dia, decorative type, stainless steel including fixing brackets/bobs in both sides fancy type complete all as specified and directed. |
| 35 | Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed. |
| 36 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6., etc complete all as specified and directed. |
| 37 | M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of rust remover by brushing to rusted reinforecemnt to remove loose rust particles and allow to dry it for 2 to 3 Hrs , insert the new reinforcement to damaged portion by drillig hole at required distance , fill the epoxy in to the hole by 2/3 of the hole and insert the reinforcement in the hole, and binding the reinforcement at rusted portion of reinforcement, apply cement slurry on entire damaged area , and plaster the surfaces with cement , sand and Polymer liquid in 1: 3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note : - Cost of formwork shall be deemed to be included. |
| 38 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 39 | M&L for Complete removal of of old plastered surfaces of walls internal & External with mechanical grinder complete all as specified and directed. |
| 40 | M&L for rendering 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed. |
| 41 | M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified and directed.(Note:- Liquid water proofing compound to be measured paid separately) |
| 42 | Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved. |
| 43 | M&L for rendering 5mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 44 | M&L for preparation of new plastered surfaces of walls & applying two coats of Oil Bound Distemper overa coat of primer complete all as specified and directed. |
| 45 | M&L for old plastered surface of walls and applying Two coats of Oil Bound Distemper over coat of primer complete all as specified and directed. |
| 46 | M& L FOR 2 mm thick waterproof wall care putty on internal/ external surfaces complete all as specified and directed. |
| 47 | Complete removal of of old plastered surfaces of ceiling and provision of chalk whiting primer on plastered surfaces ceiling and applying two coats of whitewash complete all as specified and directed by Engr-In-Chrge. |
| 48 | M&L three coats of Whitewash on newly plastered / concrete celling sufaces incuding preparation of surfaces complete all as specified and directed. |
| 49 | Material and labour for paint on external surfaces of wall,pillasters, cornices etc precoat treatment apply two coats of Anti fungal weather coat aacrylic emulsion paint over a coat of primer complete all as specified and directed. Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) Make of primer :- Asian (X2) or Equivalent Note :- (a) Each stage i.e preparation of surfaces,application of primer,application of first coat. application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item . |
| 50 | M&L for vitrified coloured tiles 9mm to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed. |
| 51 | M&L for glazed ceramic coloured tiles of size not less than 450x300x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed. |
| 52 | M&L for non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) of size 300x300mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile including 15mm thick screed bed or bedding layer in cement mortar 1: 6 complete all as specified and directed. Make of tile:- Superior quality tile from Kajaria/Somany/Orient tiles. Note:Pattern/Texture and finish of wall tile shall be approved by GE |
| 53 | M&L for non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) of size 400x400mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile including 10mm thick screed bed or bedding layer in cement mortar 1: 4 complete all as specified and directed. Make of tile:- Superior quality tile from Kajaria/Somany/Orient tiles. Note:Pattern/Texture and finish of wall tile shall be approved by GE |
| 54 | M&L for non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) of size 400x400mm inbut as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 an wall complete all as specified and as directed. |
| 55 | M&L for vitrified coloured tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm ine but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 an wall complete all as specified and as directed. |
| 56 | M&L for Endura tiles 8-10 thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 inc dismantling of tiles complete all as specified and directed. |
| 57 | M&L machine cut and mirror polished kota stone ( size not less than 55cmx55cm for flooring & for tread of steps will be in one piece) slab flooring 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed. |
| 58 | M&L machine cut and mirror polished kota stone slab 18-20 in riser of steps(in one piece ) , skirting, dado and pillar aid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed. |
| 59 | M&L for PCC1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specified and directed. |
| 60 | M&L for sand cushioning for Machine pressed precast concrete interlocking paver block including watering and consolidation complete all as specified and directed. |
| 61 | M&L for coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade including taking out of old damaged interlocking paver block complete all as specified and directed. |
| 62 | M&L for chequered cement concrete tiles with grey cement and pigment of size 20cmX20cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 63 | Dismantling water tanks and removing to store Capacity of tank exc 250 and nexc 500 litres complete all as specified and directed. |
| 64 | S&F in repairs incl hoisting HDPE plastic water cylindrical vertical type tanks closed top of capacity 500Ltrs (Make : Sintex/Sheetal) incl 20mm bore brass stop cock and 20mm bore brass float valve with polythene float complete all as specified and directed. |
| 65 | S&F in repairs incl hoisting HDPE plastic water cylindrical vertical type tanks closed top of capacity 1000 Ltrs (Make : Sintex/Sheetal) incl 20mm bore brass stop cock and 20mm bore brass float valve with polythene float complete all as specified and directed. |
| 66 | M&L for GI tubing ISI marked medium grade 15mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection and taking down old pipe and fittings etc, complete all as specified and directed. |
| 67 | M&L for GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection and taking down old pipe and fittings etc, complete all as specified and directed. |
| 68 | S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed. Make :- Nirali , Diamond ,Jain Brothers Sanitation Pvt Ltd |
| 69 | S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed. |
| 70 | S & F in repair only 15 mm dia bore pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete but fency type complete all as specified and directed. |
| 71 | S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed. |
| 72 | Supply only10 Ltr capacity,PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with and including 32 mm dia PVC flush pipe complete all as specified and directed. |
| 73 | S&f in repair of PVC connection pipe 15 mm dia 450 long with PTMT nut at both ends complete all as specified and directed. |
| 74 | S&F in repair 600mmx450mm mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 75 | S & F in repair brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete all as specified and directed. Make : Plumber /Prayag/ Jaquar |
| 76 | S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed. |
| 77 | S & F in repair over head shower with arm & flnge of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe for required length or union complete all as specified and directed. |
| 78 | S&F in repair 15 mm dia consealed type stop valves, cast copper alloy, chromium plated, screwed down, high pressure with handle, screwed both ends for iron pipe or union complete all as specified and directed. |
| 79 | S&F in repair 15mm dia Bib tap chromioum plated with crutch or butterfly handle sorewed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 80 | S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed. |
| 81 | S & F PVC bath cabinet box mirror type with shutter complete all as specified and directed. |
| 82 | S & F in repair corner shelf of 300 mm size with ABS bracketscomplete all as specified and directed. |
| 83 | S & F CP Thumbler Holder, complete all as specified and directed by Engineer-in charge. |
| 84 | S&F in repair fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. |
| 85 | S & F in repair Bidet spray (Health faucet) with 1 meter flexible tube and holder, complete all as specified and directed. |
| 86 | S & F in repair CP Toilet paper holder, complete all as specified and directed by Engineer-incharge. |
| 87 | S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked complete all as specified and directed. |
| 88 | Supply only 15 mm dia bore basin mixture brass chromium plated with capstan heads screwed down high pressure with or without letter ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 89 | S & F in repair PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed. |
| 90 | S&F in repair for 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed complete all as specified and directed. |
| 91 | S&F stainless steel plate rack for kitchen 1mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and directed. Note : size of plate rack should not be less than 900x 1200mm and weight of rack shall not be less than 8.50 kg each. |
| 92 | S&F in repairs soap dish (ovel) type mild steel chromium plated of size not less than 50mm dia complete all as specified and directed. |
| 93 | S&F in repair CP bottle trap 32mm bore for wash basin with inlet and outlet screwed for connection including necessary packing union and cup and fixed complete all as specified and directed. |
| 94 | S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 95 | S & F in repair 110 mm bore PVC (SWR), junction single, (Single T)with or without acess door equal or unequal complete all as specified and directed. |
| 96 | S & F in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 97 | S & F in repair 75mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 98 | S & F in repair 110 mm bore PVC (SWR) bend with or without excess doorany radius complete all as specified and directed. |
| 99 | S & F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 100 | S & F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 101 | S & F in repair 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 102 | Dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed. |
| 103 | S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed. |
| 104 | Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed. |
| 105 | M&L in for MS steel Hollow Section work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed. |
| 106 | M&L for preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed. |
| 107 | S& F 18/19 mm thick Block boards, grade 2 quality, interior grade, commercial type, conforming to IS fixed with screws timber frame work as in cupboard , wardrobe etc complete all as specified and directed. |
| 108 | S&F for 18 mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed. |
| 109 | S&F factory made PVC 5.5mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure complete all as specified and directed. |
| 110 | S&F modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and directed. |
| 111 | S&F modular type stainless steel basket size 0.50 m x 0.50 m x 0.150 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and directed. |
| 112 | S&F modular type stainless steel basket size 0.50 m x 0.50 m x 0.21 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and directed. |
| 113 | S&F modular type stainless steel cutlery basket size 0.50 m x 0.50 m x 0.100 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and directed. |
| 114 | S&F modular type stainless steel cup and saucer basket size 0.50 m x 0.50 m x 0.150 m (dia of wire not less than 3.0mm or made with 1mm perforated SS sheet ) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and directed. |
| 115 | S&F modular type stainless steel Grain basket size 0.50 m x 0.50 m x 0.150 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and directed. |
| 116 | S&F modular type stainless steel Thali basket size 0.50 m x 0.50 m x 0.200 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and directed. |
| 117 | S&F 100mm size MS mat/glossy finish handle complete all as specified and directed. |
| 118 | S&F stainless steel self closing hinge of 75mm size for PVC door shutter complete all as specified and directed. |
| 119 | S&F 50x15mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed. |
| 120 | S&F stainless steel drawer cabinet channel for moving the drawer etc complete all as specified and directed. |
| 121 | S&F 40mm flaps width (when open) continuous (Piano) hinges mild steel bright finish or electrogalvanised complete all as specified and directed. |
| 122 | S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 123 | S&F Bitumen blown any grade, applied hot,two coats, to concrete surfaces at the rateof 1.5kg. per sq. m per coat complete all as specified and directed. |
| 124 | M&L for 10 mm thick rendering in CM 1:3 with WPC @ 3% on fair faces of brick work or concrete surface finished even & smooth without using extra cement (Note : WPC to be paid seprately) complete all as specified and directed by Engr-in-Charge. |
| 125 | M & L for 40 mm (Average thickness ) of PCC (1:2:4) type B-0 (using 20 mm graded stone aggragate) as in roof padding for leveling of roof top using water proofing compound surface finished even & rough to receive screed bed etc complete all as specified & directed. (Note:- WPC shall be measured and paid separately). |
| 126 | M & L for Brushing with neat cement slurry @ 3 Kg per Sqm area mixed with integral water proofing compound complete all as specified and directed. (WPC shall be measured and paid separately under respective item). |
| 127 | Taking down of old APP MEMBRANE & preparing of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete all as specified and directed. |
| 128 | M&L for rounding to edges of stone(granite/kota) slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 129 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite complete all as specified and directed. |
| 130 | S&F MS work as in doors or gates, water staging,Drain cover windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails,grill braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed by Engr-in-Charge |
| 131 | M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping) etc rough finished surface of concrete complete all as specified and directed. |
| 132 | M&L for high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified and directed. |
| 133 | M&L for RCC M-20 grade concrete (Nominal Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified and directed. NOTE : Reinforcement shall be measured and paid separately under relevant item. |
| 134 | Demolition of cement concrete (Reinforced) of any description and in any position not otherwise complete all as specified and directed. |
| 135 | M & L for repairing sunken floor by providing water proofing treatment to sunken floor surfaces of RCC slab by the following specifications complete all as specified and directed :- (a) Provide PCC 1 : 1.5 : 3 type A0 using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or other equivalent as approved, and finished the surface even & smooth without using extra cement. (b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion. (c) Applying surfaces with bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm on sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/Nahanni trap etc including demolition ,cutting holes and making good the disturbed surface as per existing complete all as specified and as directed. (d) Applying two coats of tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. (e) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method.(Note : Floor Area shall be measured for payment). |
| 136 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 137 | Supply of chain link fencing including line wire any mesh and any type of standard rails staining bolt etc including provision of binding wire etc complete all as specified and directed. |
| 138 | Fixing only chain link fencing including line wires, and mesh size type of stadrads, rail straining bols etc size of mess 100x100mm 4mm dia wire complete all as specified and direceted. |
| 139 | M&L injection grouting of low viscosity epoxy grout with Sikadur 52 or 53 (Make : SIKA/ BASF) including drilling hole @ 50 cm centre to centre (approx) of required dia in RCC slab,beam,walls and column with power drill and fixing metalic/pvc NRV packer Min 100mm or upto required depth grouting shall be done with mechanical pressure pump of pressure 8 to 10 Kg / Sq Cm. (Note: Paymment shall be made on basis of net weight of epoxy grout injected.)Make : Sika :Sikadur 52 & 53,Fosroc: Conbextra EP10 or equivalent as approved by GENote :- 1.Application of the products shall be by manufacturer’s authorized applicator and as per manufacturer's specifications complete all as specified and directed.2. The work will carried out on any type of concrete strutcure column,Beams,Slabs & walls hence necessary arrengements for scafolding for desired height, shall deemed to be incl in rate quoted by the contractor. |
| 140 | M&L 25 mm thick shotcreting by mechanical means in RCC column, beam and soffit of RCC slab with approved M-25 Design mix ( using 10mm and below graded stone aggregate )using polypropelene macrofibre 6mm long & upto 6mtr hieght from floor level, including all necessary scaffolding and props required to support the slab at required spacing up to the required height , machinery required, minimum pressure of shotcrete at nozzle shal not be less than 40 PSI and finished to uniform thickness with straight edge also including GI wiremesh weight not less then 2.4 Kg /Sqm and fixed to shear connectors with MS wire including making all necessary arengment for covering of walls & floors with PVC sheet / tarpaulin to protect the surface from any damage due to shotcreting e including all necessary support wooden prpos and suitable frame work to support the plateform etc complete all as specified and directed. |
| 141 | S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 40 mm dia bore pipe (including in short length) as in spout pipes etc complete all as specified and as directed. |
| 142 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed. |
| 143 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 144 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 145 | Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed. |
| 146 | Taking down existing electric energy meter of any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/Mand Refixing the same after completion of work on same location complete all as specified and as directed. |
| 147 | Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M and Refixing the same after completion of work on same location complete all as specified and as directed. |
| 148 | M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including modular sunken anodised steel box for housing modular switch socket , regulator etc including modular cover plate and cover frame of any module ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for (a) One light point/bell/fan point controlled by one switch |
| 149 | (b) One light point/fan controlled by Two switch |
| 150 | (c) One 5amps socket out let point controlled by one switch on same board with other switches. |
| 151 | (d) One 5amps socket out let point on independent board controlled by one switch. |
| 152 | All as per Item No.148,above, but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point on independent board including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed. |
| 153 | M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in in existing conduit & making good the disturbed surface of wall with and including modular sunken anodised steel box for housing modular switch socket , regulator etc including modular cover plate and cover frame of any module ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for (a) One light point/fan/ Bell point controlled by one switch |
| 154 | (b) One 5amps socket out let point controlled by one switch on same board with other switches. |
| 155 | (c) One 5amps socket out let point on independent board controlled by one switch. |
| 156 | All as per Item No.153, above, but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point on independent board including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed. |
| 157 | S & F for Modular Switch , single pole, one way, and 5/6 Amp single module complete all as specified and directed. |
| 158 | S & F for Modular Switch , single pole, two way, and 5/6 Amp single module complete all as specified and directed. |
| 159 | S & F for Modular Switch , single pole, one way, and 15/16 Amp single module complete all as specified and directed. |
| 160 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified and directed. |
| 161 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module complete all as specified and directed. |
| 162 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 163 | S & F for for Bell push modular 6 Amps single module complete all as specified and directed. |
| 164 | S & F for lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed. |
| 165 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed. |
| 166 | S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed. |
| 167 | Supply and fix brushless direct current motor (BLDC) ceiling fans complete with blades(03Nos), with remote control and accessories , 230 V, 50 Hz, 1200 mm sweep, Min air delivery 210 CMM with service value greater than 7.75 BEE. Five star rated, provide electrical connection from ceiling rose to fan terminal by providing flexible cable three core Copper conductor of size 23/0.0076 (3 Core x 0.50 Sqmm), ISI marked and write down MES Number on fan by black paint/Marker complete all as specified and directed by Eng-in-Charge. Make :- Havells / Bajaj//Orient |
| 168 | Supply and fix exhaust fan , steel/metal body AC single phase, 230 V of size 300 mm sweep with blades, frame and louvers complete all as specified and as directed. |
| 169 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted) |
| 170 | S&F Wall mounting fan of sweep fans complete with fixing accessories , 230 V, 50 Hz, 400 mm sweep, including providing electrical connection from ceiling rose to fan terminal and write down MES Number on fan by black paint/Marker complete all as specified and directed. |
| 171 | S & F for Highly efficient LED Inverter Bulbs, 09 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed |
| 172 | Supply and fix in repairs Wall light fittings suitable for LED bulb of 9 watt, including connection with all necessary fixing accessories complete all as specified and directed by Engr-in-Charge. Make :- Havells/Bajaj/ Philips. |
| 173 | Supply and fix in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. Make:-Havells / Wipro |
| 174 | S & F for Decorative ultra slim LED light fitting 2 feet 10 watts, 6500K batten aluminium extruded with end caps complete all as specified and as directed. Havells/ Wipro/Philips. |
| 175 | S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make: Havells / Bajaj /Philips. |
| 176 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm dia medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed. |
| 177 | S&F in repairs LED round light fitting 15W recess mounting type, white light LED or warm light LED 6500K as per site requirment complete with driver duly connection with copper cable etc. Make, Havells / Bajaj /Crompton/ Wipro . Note :- Ceiling cutout ø 180 mm, height 23 mm ±1 mm for 15 W |
| 178 | Supply assembly, erection, testing commissioning of indoor wall mounted panel frame mounted cubical type factory made IP 65 of environment friendly polycarbonate PC - GFS Insulation-enclosed power distribution board as power switchgear and control gear assembly (PSC) in accordance with IEC 61439-2wall mounted LT panel board with OEM Manufacturing certificate,Bottom parts and lids of the boxes made from impact-resistant polycarbonate, halogen and silicone-free, colour RAL 7035, transparent lid with quick action fasteners for tool operation. Burning behaviour according to IEC 60695-2-11 glow wire test + 960°C.Maximum water absorption 10 mg in accordance with DIN 53473. Protective measure: totally insulated (protection class II), the enclosure should have mechanical strength equivalent to IK10 (bidder should submit compliance for same for polycarbonate enclosure in OEM letterhead with technical bidding) suitable for 415V 3 phase 4 wire, 50HZ non metalic kiosk single door with the required provision for 3 switch gears and control gears along with the approved make. the LT panel including Sepratedcomparment for fixing of fourNosThree Phase &single phase meter and providing MCB,providing glass view for reading of meter complete fabrication shall be painted as per specification. Wall mounted LT panel board shall be complete with all standard accessories factory made with OEM manufacturing certificate & the type tests report as per CPRI ,including, phase indicating lamps control fuse unit, MV danger notice plate numbered/lettered and with comprising the following. Drawing from Original Equipment Manufacturing ( OEM )to be got approved from accepting officer before supply of Panel. ( Drawing from any other agency / System house will not be accepted. Panel should be manufactured and assembled by OEM only. Fabrication /Assembling from any other system house will not be accepted. The bidder should submit all relevant type test certificate / compliance in OEM letterhead during technical evaluation. The bidder should provide warranty / guarantee format in OEM letterhead. The bidder should submit Routine test certificate during order execution in OEM letterhead.Make: HENSEL Mi Power distribution board / SpelsbergGTi System/ Rittal polycarbonate enclosure*Incoming : MCCB 125A, 4 pole, 25KA-1 No.,RYB Indication lamp, Digital Ampere Meter . Digital Volt Meter ,125A/5A,5VA,CL.1, CT – 3nos,Fuse Terminal Block with 2A Fuse-6nosOutgoing : connecting the following switch gear: (i) MCB, 40A FP amps, 415 volts, ‘C’ curve, 10 KA - 04 Nos (ii) MCB, 32A DP amps, 240 volts, ‘C’ curve, 10 KA - 02 Nos (iii) Fixing only 3phase serviceable existing electric meter- 04 Nos each |
| 179 | S & F for sheet metal enclosure MCB DB TPN 4 way, IP-43, IK 09 with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 180 | S & F for sheet metal enclosure MCB DB SPN 4 way, IP-43, IK 09 with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 181 | S & F for metal clad box suitable for 230 volt 50 Hz for AC and Geser connection three pin and socket with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed. |
| 182 | M&L for Sub main wiring in repairs with four runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed FR LS 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Make of PVC conduit/Casing Caping:- Plaza/Finolex/Polycab/Kalinga/Jindal/Asian :- Note:- four runs of 6 sqmm cable,two run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 183 | M&L for Sub main wiring in repairs with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed FR LS 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Make of PVC conduit/Casing Caping:- Plaza/Finolex/Polycab/Kalinga/Jindal/Asian :- Note:- Two runs of 4 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit |
| 184 | S & F for MCB Three pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 185 | S & F for MCB single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 186 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 187 | Earthing complete with galvanisedsteel earth plate electrode60×60cm.× 6mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate notless'than 1.5 metres below normalground level, connected togalvanised earth lead wire 4.0mmdia by means of bolts, nuts, checknuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing testpoint all as specified or indicatedincluding testing on completion.Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
