|
| 1 | Sch 'A' Part-I (B/R works)Taking down chowkat or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified and directed. |
| 2 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc 1.50 and not exc 4 sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls including racking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed. |
| 4 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work/Stone surfaces, finished even and smooth without using extra cement including mixing of water proofing compound, complete all as specified and directed.Note: WPC shall be measured & paid separately. |
| 5 | M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work/Stone surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 6 | Supply only water liquid water proofing compound confirming to IS, complete all as specified and directed. |
| 7 | M & L for preparation of newly plastered surfaces of walls and applying two coats of exterior weather coat paint of two or more colours (multi colour pattern as approved by GE) including a coat of primer, complete all as specified and directed. |
| 8 | M&L for preparation of New plastered surface of walls and applying two coats of oil bound distemper over a coat of wall care putty, complete all as specified and directed. |
| 9 | M & L for preparation of old steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 10 | M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) 75 mm thick as in plinth protection, finished even and fair (without using extra cement),laid in alternate bays including providing 6 mm wide joints through out the thickness of plinth protection in concrete bays and in between walling and plinth protection,joint filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed. |
| 11 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thikness, including cover fillets, complete all as specified and directed. |
| 12 | M&L for providing & fixing of 4mm thick designer ceiling board in ceiling fixed with screw as per manufactures instructions, laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick galvanized steel sheet & of size 24x32x300mm and spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 3 mm dia to be fixed by approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200 long cross tee with (double stitching) to be inter locked between main runners at 600mm centre to from 1200x600mm modules cross tee longer than 600mm modules to be formed by fitting 600mm long cross tee, tee perimeter wall angle shall be of 0.45mm thick galvanized steel of size 19x19mm and 300mm long of white colour all as per instruction, complete all as specified and directed. |
| 13 | S&F Factory made MS tubular Box type window/ventilator of MS rolled steel section conforming to IS-1038 and shall be ISI marked manufactured by ISI approved manufacturer, openable frames shall be fabricated of sections as approved by Engr-in-Charge corner welded to form a solid fused welded joint handles shall be of z section welded with openable frame box steel section(Consisting of both shutter glazed shutter and gauge shutter complete) used in outer frame shutter frame and central frame shall be ERW section of 16 gauge with fixing lugs to be fixed as per provision of IS-1038 except that top lugs shall not be provided , all shutters of windows shall be provided with 4 Nos friction free hinges, 2 Nos 75 mm tower bolts to each leaf of window one at top and one at bottom welded on 3 mm thick steel sheet piece of suitable size which shall be in turn welded to z section f steel window to provide suitable arrangement of using tower bolt and 1 nos bow handle in each shutter. Glazed shutter and , gauged shutter of window , mild steel casement stays 300 mm with hinged joint and two plates with studs complete all as specified with all fittings and fixtures without glazing bars, 3mm sheet glass in glazed shutter and, GI wire mesh of 0.56 nominal dia and average width of aperature 1.18 mm in gauged shutter, complete all as specified and directed. |
| 14 | Demolition of cement concrete (un reinforced) in ground floor & paving not exceeding 15 cm thick below or above ground level, complete all as specified and directed. |
| 15 | M&L for PCC type B-0, (25 mm thick), 1:2:4 (using 12.5mm graded stone aggregate) in subbase flooring and finish surface even and fair without using extra cement, complete all as specified and directed. |
| 16 | M&L for PCC type C-2, (75 mm thick), 1:3:6 (using 40mm graded stone aggregate) in subbase of flooring and finish surface even and fair without using extra, complete all as specified and directed. |
| 17 | M& L for providing kota stone slab flooring 18-20 mm thick over and including 20 mm thick screed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment including cutting, complete all as specified and directed. |
| 18 | M& L for providing Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar over and including cement plaster(10 mm thick) in cm(1:3) and jointed with grey cement slurry mixed with pigment including cutting, rubbing and polishing and incld dismsntling all, complete all as specified and directed. |
| 19 | M & L for Marble work (18-20mm thick) (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in over & including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble type Makrana white, complete all as specified and directed. |
| 20 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings sheets in roof, complete all as specified and directed. |
| 21 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour (multi colour pattern as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 22 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of approved colour (multi colour pattern as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 23 | M & L for factory made 100% Solid WPC Door Frame 125mm x 65 mm double Rebated made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & manufactured by \\" RAJSHRI \\" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ), Minimum Compressive Strength of 58 N/mm2 , Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and lenght, complete all as specified and directed.Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 24 | M & L for Factory Made 30mm thick 100% Solid WPC Laminated Moulded flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by \\"RAJSHRI\\" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, complete all as specified and directed.Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company. |
| 25 | M&L for Factory made 30mm thick Rajshree brand wire mesh solid PVC door shutter consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15mmx 15mm for top, lock and bottom rails. MS frames shall have a coat of metal primer of approved make and manufacturer 19mm x 19mm MS square tubes shall be covered with heat molded plain sheets channel made from 5mm (0.25 tolerance) thick PVC sheet of density 600Kg/CBM manufactured by an ISO 90012015 certified company of size 30mm thickness, 115mm width out of which 100mm shall be flat and 15mm shall be bent in 90 degree on either side forming stiles, one of ghe 90 degree bend is cut from stiles as well as rails to nail from inner side of door to hide wire mesh fixing steel screws, 5mm(0.25 tolerance) thick 140mm wide PVC sheet out of which 125 mm shall be flat and 15mm shall be bent in 90 degree on the inner side to form top and bottom rail and 155mm wide PVC sheet out of which 125mm shall be flat and 15mm shall be bend in 90 degree on both side to form lock rail.An additional 5mm (0.25 tolerance) thick PVC srip of 20mm width is to be struck on the interior side of the C-channel using PC solvent cement adhesive. Panel will be of GI/SS wire mess of 24 gauge to be fitted inside area of stiles and rails. The wire mess in top, bottom and lock rail is sealed with 15mm x 15mm tube with steel screw of size 13 x 6mm, 10mm (5mm x 2Nos) thick PVC strip of 25mm width is to be struck and nails on both side of GI wire mess interior at the top, bottom and lock rail. 10mm thick (5mm x 2 Nos) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail door to be fixed to frame with 3Nos MS powder coated butt hinge size 100mm x 25mm x 2mm and 32mm long steel screw drilled suitable to pass through both the wall of the MS tube, other hardwares should be fixed with 19 x 6mm size steel screw etc, complete all as specified and directed. |
| 26 | Dismantling of mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 27 | M&L for rolled sections as in main and cross beams/columns, hip and jack rafters, truss, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates.(Fe-410 W Gde E-250 Quality A), complete all as specified and directed. |
| 28 | Demolition of brick/stone work built in cement mortar, complete all as specified and directed. |
| 29 | Excavation in trenches n. exc 1.5,m wide and n. exc 1.5m deep and getting out in hard/sof soil, complete all as specified and directed. |
| 30 | Demolition of cement concrete unreinforced in Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 31 | M&L for cement concrete in foundations, filling and mass concrete in 1:4:8 type D2 (using 40mm graded stone aggregate), complete all as specified and directed. |
| 32 | M & L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed. |
| 33 | All as per Item No 32.00 here-in-before but except stone. |
| 34 | M & L for PCC 1:2:4, Type B-1, (using 20mm graded stone aggregate) as in coping including necessary form work, if required, complete all as specified and directed. |
| 35 | Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soil, complete all as specified and directed. |
| 36 | Removing excavated material (soil) n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 37 | M&L for Pre-cast cement concrete type C-1 (1:3:6), factory made (using 20 mm graded crushed stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 38 | Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement including forms, moulds, stopped end, etc, complete all as specified and directed |
| 39 | M & L for cement concrete in surface channels and drains and bedding type B-1 (1:2:4), (using 20 mm graded stone aggregate), complete all as specified and directed. |
| 40 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed: |
| 41 | M&L for pre polished coloured chequred cement concrete tiles of size 30 cm X 30 cm x 25 mm thick set, jointed in neat cement slurry in floor and pointed with grey cement and no pigment laid over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 42 | Dismantling of floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 43 | Taking down old unserviceable GI pipe of 15mm bore with all fittings etc, complete all as specified and directed. |
| 44 | Dismantling water tanks and removing to store exc 250 & not exc 500 ltrs of capacity, complete all as specified and directed. |
| 45 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing, complete all as specified and directed. |
| 46 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 47 | S & F 100 mm long stainless steel butt hinges, medium weight cold rolled, complete all as specified and directed. |
| 48 | S & F 150 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed. |
| 49 | S&F aluminium alloy anodised sliding door bolt with fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed of size 200 mm all, complete all as specified and directed. |
| 50 | S&F 100mm long Extruded Aluminium anodised alloy handles, fabricated type, complete all as specified and directed. |
| 51 | S&F steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed. |
| 52 | S & F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed. |
| 53 | M&L for rendering 5mm thick on concrete surfaces of ceiling or chajja etc in cement morter 1:3 finished even and smooth without using extra cement, complete all as specified and directed. |
| 54 | M&L for preparing new plastered surface of ceiling surface and applying two coats of white wash etc, complete all as specified and as directed. |
| 55 | M&L for Non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cm (1:6), complete all as specified and directed. |
| 56 | M&L for glazed ceramic coloured tiles of size 450 x 350 x 7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15mm thick rendering in cm (1:4), complete all as specified and directed. |
| 57 | Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors, complete all as specified and directed. |
| 58 | S&F rotational moulded polythene 2 layered white/Black colour water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part-I including dismantling of existing tank, complete all as specified and directed. |
| 59 | S&F (in repair) Vitreous china wash down water closet pan (pedestal pattern), white including trap connection to drain(or outgoing pipe) and to flusing pipe, antisyphonage pipe etc., complete with seat and cover for pedetal pan, complete all as specified and directed. |
| 60 | S&F in repair vitreous China squatting pan, `Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed. |
| 61 | Supply and fixed in repair 10 litres capacity, PVC, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 62 | S&F in repair vitreous China wash basin, white, flat back, size 550 x 400mm excluding tap, chain, plug but including for fixing of taps, waste fitting, brackets and cutting for and pinning in ends of brackets but fixed (in repair), complete all as specified and directed. |
| 63 | S&F in repair wall mixture with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wal flange of 15mm bore etc, complete all as specified and directed. |
| 64 | S&F as (in repair) swivel shower of brass chromium plated with long head for fixing with 15 mm pipe, complete all as specified and directed. |
| 65 | S&F in repair for 15mm bore Angle Stop valve, fancy type, heavy duty, cast copper alloy, chromium plated, screwed down and screwed for iron pipe, complete all as specified and directed. |
| 66 | S & F in repair for of 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 67 | S & F in repair for 15mm bore chromium plated bib tap, cast coper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 68 | S&F in repair Chromium plate tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 69 | S & F Soap dish, vitreous China white of size 160x160x90mm, complete all as specified and directed. |
| 70 | S&F PVC connection 15mm size, 450mm long with PTMP nuts both side, complete all as specifed and directed. |
| 71 | S&F in repair for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 72 | S&F in repair for PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 73 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 74 | S&F in repair for 110mm PVC (SWR) bends any radius, complete all as specified and directed. |
| 75 | S & F in repair PVC (SWR) 110 mm junction piece single, (Single Y) equal or unequal, complete all as specified and directed. |
| 76 | M&L for 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 77 | Sch 'A' Part-II (E/M works)Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be amde as per conditions seperately) and making good the disturbed surfaces of walls, floor or ceiling etc to match with existing specifications, complete all as specified and directed. |
| 78 | M&L for point wiring for one light point/ fan point/ one bell/ buzzer point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor two single core multi strand flexible cable and 1.5sqmm PVC insulated FRLS unsheathed copper conductor singel core cable (green colour) as earth lead and including PVC conduit along with modular sunken boxes of required size with modular white cover plate with frame including cutting chaes to wall making good the disturbed surfaces to mathc with the existing specificaiton, complete all as specified and directed.Note: The colour coding of wiring to be followed as Red/ Yellow/Blue Phase/Neutral/ Earth respectively . |
| 79 | All as per Item No 78.00 here-in-before but for socket outlet 5 Amp on same board. |
| 80 | All as per Item No 78.00 here-in-before but for socket outlet 5 Amp on independent board. |
| 81 | All as per item No 78.00 here-in-before, but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead. |
| 82 | S&F modular switch piano, 1 module, 6 Amps SP one way 230 volts, complete all as specified and directed. |
| 83 | S&F modular switch, single pole, one way 16 Amps 240 volts, complete all as specified and directed. |
| 84 | S&F modular socket outlet 2/3 pin, 2 module, 6 Amps, 230 volts, complete all as specified and directed. |
| 85 | S&F modular socket outlet, multipurpose, 6/16 Amps, 2 module, 230 volts, complete all as specified and directed. |
| 86 | S&F in repair modular fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100%, 240 volts AC and connecting electrically complete all as specified and directed. |
| 87 | M&L for ceiling rose surface bakelite 3 terminals, PVC/ Polycarbonate, isolated body, complete all as specified and directed. |
| 88 | S&F in replacement LED Tube light fitting, 1x 20 watts. Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete rewired, Premium 20 W LED batten, connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core, including removing old/unsv, complete all as specified and directed. |
| 89 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 90 | S&F in replacement LED street light fitting 35watt, 230 volts AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with bracket bend to shape made as required of 32/40mm dia not less than 1.2mtr long GI pipe light grade fixed to pole/wall with flat iron clamp of size not less than 40x6mm , complete all as specified and directed. |
| 91 | Taking out unserviceable ceiling fan and deposit to MES store, supply and replacement with ceiling fan 230volt 50Hz, AC, 1200mm sweep, min air delivery 210CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod and electronic regulator alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core 0.75sqmm PVC insulate copper conductor cable, complete all as specified and directed. |
| 92 | M&L in replacement sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, complete all as specified and directed. Note:- MCBs will be measured separately. |
| 93 | M&L for MCB single pole and neutral 240 volts any rating upto 32Amps, with rupturing capacity 10 KA, including providing thimble for out going cables, including removing old/unsv, complete all as specified and directed. |
| 94 | M&L for MCB Single Pole 240 volts any rating upto 5 to 32 Amps, 240Volt, 10 KA, 'B' curve in the DB complete with connection, testing and commissioining, complete all as specified and directed. |
| 95 | M&L in replacement submain wiring with 2 single core, PVC insulated unsheathed FRLS flexible copper conductor cable of size 6sqmm and one single core PVC insulated unsheathed FRLS flexible copper conductor cable (green colour) of size 6 sqmm as earth lead and including PVC casing caping/ non metalic rigid PVC conduit medium grade and making good the disturbed surfaces to match with the existing specification all as required at site, complete all as specified and directed. |
| 96 | M&L in replacement for exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 250mm sweep having power input 70W speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed. |
| 97 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity, 25 Litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as sepecified and directed. |
| 98 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core including taking out old unserviceable cable, complete all as specified and directed. |
| 99 | Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft/ loose soil, complete all as specified and directed. |
| 100 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm, complete all as specified and directed. |
| 101 | Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 102 | Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. Note: Punned thickess i.e 18 cm shall be measured for payment purpose. |
| 103 | M&L for sub class ‘B’ Bricks old size, laid dry flat over the cable butting each other length of cable equal to width of brick complete all as specified and as directed. |
| 104 | M & L in replacement for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate vertically to a depth not less than 1.5 mtr below normal ground level, connecting to the galvanised iron earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel earthwire protected by provision of GI light grade pipe 15mm dia including provision of concrete pit made from PCC (1:2:4) type B-1 (using 40mm graded stone aggregate) with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom, 1.75mtr long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in hard/ dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I, connected to earth test point all as specified or indicated including testing on completion, complete all as specified and directed. Please Enable Macros to View BoQ information |
