Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 2 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 3 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red :Area of slab over 0.50 sqm |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 5 | Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both vertical sides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer’s specification and direction of engineer- in-charge. |
| 6 | Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer’s specification and direction of engineer-in-charge. |
| 7 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 8 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete |
| 9 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 10 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
| 11 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 12 | 20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 13 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 14 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 15 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 16 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. sqm 338.25 Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 17 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 18 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm |
| 19 | Providing and fixing toilet paper holder : C.P. brass |
| 20 | Providing and fixing soil, waste and vent pipes : 100 mm dia : Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 21 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 22 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78mm and effective height of 88 mm, weighing not less than 190gms. |
| 23 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
| 24 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/ make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes |
| 26 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 27 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group A |
| 28 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. ( 2 x 2.5 sqmm + 1X 2.5 sq mm earth wire) |
| 29 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. ( 2x 4 sqmm + 1X 4 sq mm earth wire) |
| 30 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch |
| 31 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 2 way 5/6 A switch |
| 32 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch |
| 33 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet |
| 34 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet |
| 35 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone/Lan socket outlet |
| 36 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) |
| 37 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm) |
| 38 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 4 Module (125mmX75mm) |
| 39 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm) |
| 40 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 8 Module (125mmX125mm) |
| 41 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 12 Module (200mmX150mm) |
| 42 | Installation, Testing and Commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep. |
| 43 | Providing and Fixing of following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreader in existing cubicle panel board including drilling in cublicle ( 100 Amp TPN, 16 KA, TPMCCB |
| 44 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4 + 36), Double door |
| 45 | Supply & Fixing 5 to32 Amp rating, 240/415 Volt, 10 KA, \\"C\\" Curve miniatur circuit breaker suitable for inductive load of single pole in existing MCB DB |
| 46 | Supply and fixing 5 to 32 Amp rating,, 240/415 Volt, 10 KA, \\"C\\" Curve miniatur circuit breaker suitable for inductive load of single pole in existing MCB DB (triple Pole Neutral) |
| 47 | Supply and fixing cable end box suitable for triple pole & neutral, sheet steel, verticle MCB DB 415 Volts complete with connection. Testing and commissiong etc. as required. (6 Way) |
| 48 | Providing and Fixing of following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreader in existing cubicle panel board including drilling in cublicle ( 125 Amp TPN, 36 KA, FPMCCB |
| 49 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 50 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 51 | Supply of 4 X 70 Sqmm Al. Armoured Cable |
| 52 | Supplying & Placing Modular table in completely knock down conditions with an overall size 2850mm X 2100mm X 750mm that is to be assembled at site. The main top shall have the combination of PLPB board and MDF board. The table top shall have the size 1800mm X 900mm made up of 25mm thick Post-forming laminate board of grade II of IS 12823 with approved laminate and finish as per approved shade. The base top shall be made up of 25mm thick Medium density fibre-board with black deco painted. The table top profile shall be in rectangle shape with top and base top full round post form. The connecting top shall be made up of 25mm thick Medium density fibre-board having an overall size 1050mm X 1200mm/900mm. The connecting top shall be in round shape with deco black painted and full round post forming edges. The table top and connecting top shall be supported over MDF board based gable end leg and metal base pole leg respectively. The end wall of the table on the side shall be topped by gable end. It shall be made up of 25mm thick MDF board and profile shall be in linear shape with deco black paint. The gable end lag shall be 50mm thick made up of MDF board. There shall be shoe provided at the base to avoid scratches on the floor. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick pre-laminated particle board in linear shape with appropriate PVC edge banding connected with both end. The side top shall be provided with an overall size 1200mm X 600mm X 730mm with 25mm thick Post forming laminate and 25mm thick MDF board base plingth. The side top profile shall be in rectangle shape with full round post form edges. The top shall be supported over 50mm Peg which mounted over the fixed pedestal. The fixed pedestal shall be provided for storage purpose with an overall size 400mm X 580mm X 630mm. It shall be made up of Pre-laminated particle board of grade II of IS 12823 with top 25mm thick drawer base 9mm thick and other parts 18mm thick like shutter, back, side panel etc. The top shall be full round post form at front and other edges shall be sealed with appropriate edge banding. It shall have 3 drawer having same size which shall be operated by roller channel and SS handle. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. A mobile pedestal shall be provided with an overall size 400mm X 530mm X 560mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, facia shall be 18mm thick, top 25mm and drawer base 9mm thick. The pedestal shall have 2 nos. of drawer i.e. 1 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of sliding channels to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table . The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. |
| 53 | Providing supply and fixing of back unit of for table with overall size of W1500 x D450 x H750, having 4 drawer both side and 2 doors in the mid, It should be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top of the shutter shall be 25mm thick and all other profile i.e. side, back, shutter, skirting shall be 18mm thick and the edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. There shall be buffers provided at the bottom to avoid scratches on the floor, The boards used should meet international standards of quality and safety, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS 2380. he manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table. |
| 54 | Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back frame shall be made up of the combination of 15mm thick hot pressed commercial plywood and ply-board padded with high resilience polyurethane foam (50+25+30)mm thick having density (40, 32 & 32)kg/m³ in seat and (30+25)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. Seat and back shall be covered with polished wooden at both side for decorative appearance. The chair shall be supplied with natural wood arm having melamine polish and cushion base leatherite covering top. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged metal insert CRCA covered with natural wood having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 520±10 mm(D) X 530±10 mm(W) and back size shall be 530±10 mm(W) X 710±10 mm(H) from seat. Overall height shall be = 1160±10 mm, overall depth = 705±10 mm & overall width = 675±10 mm.. he manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table. |
| 55 | Providing and supplying visitor chair with ergonomically designed for user comfort. The seat and back shall be made of 15mm thick hot pressed commercial plywood with HR polyurethane foam 50mm thick having density 40kg/m³ in seat and 25mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The seat and back shall be arrested together with CRCA pipe frame and the armrest shall be used cushion arm mounted on PP armrest. The frame shall be cantilever support type made up of MS/CRCA powder coated round pipe of Dia. 28mm with 2mm thick. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 500±10 mm(W) X 490±10 mm(D) and back size shall be 510±10 mm(H) from seat & overall height = 945±10 mm. . he manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table. |
| 56 | Visitor Chair, Without Arm, Chrome Plated Pipe Stand, Seat & Back Fabric Tapestry. Chrome Plated . the manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table |
| 57 | Providing and supplying a medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood and the back shall be supplied with metal pipe, inserted between backrest. The chair shall be padded with high resilience polyurethane foam 50mm thick having density 40Kg/m³ in seat and 12mm thick having density 23Kg/m³ in back. The seat and back shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM and breathable mesh tapestry behind the backrest.. MS chrome plated pipe frame shall be provided on both side of seat and back with size 25mm X 10mm. The backrest shall be supplied by keeping the natural curvature of the spine which helps to provide full back support. The armrest shall be used black integral polyurethane arm mounted on CRCA chrome plated pipe having size 40mm X 10mm completely joint with seat and back with the assistance of Allen key screw. A chrome plated round bend pipe of dia. 9mm shall be provided behind the backrest of the chair and welded with main frame. For seating durability the chair shall have knee tilt 360 degree revolving mechanism with four position locking and tilt tension adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal shall have five legged CRCA chrome plated having pitch circle dia. 640mm fitted with 5 nos. twin wheel castors. The castors of the chairs should be injection moulded in black 30% glass filled, confirming to ANSI/BIFMA Standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The Seat size shall be 490±10 mm(W) X 520±10 mm(D) and back size shall be 450±10 mm(W) X 535±10 mm(H) from seat & overall height = 980±10 mm, overall width/depth = 740±10 mm. the manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table |
| 58 | High Back Chair, PU Adjustable Arm (Up-Down), Gas Lift, Nylon Base, Seat & Back Mesh Tapestry Swivel Tilt the manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table |
| 59 | Supplying & placing computer desk of size 1200mm(W) X 600mm(D) X 750mm(H). It should have work top made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top board shall be supported on fixed pedestal at one end and fixed CPU unit at another end. The desk shall be clad with 18mm thick modesty panel which provide structural support for the desk. It should be 18mm thick pre-laminate particle board connected with both end. Key-board trey shall be provided 18mm thick pre-laminated particle board with an overall size 550mm X 350mm. The trey shall be operated by sliding channel runs on nylon roller to smooth operation. Fixed pedestal shall be provided at one side with the size 335mm X 470mm X 725mm having 3 drawer operated on sliding channel and 1 filing drawer having operated on ball bearing channel. All drawer shall be operated with SS handle with multi purpose (MP) locking mechanism. Openable storage shall be provided at another side with the size 294mm X 450mm X 725mm having one adjustment shelf to accumulate CPU. Complete understructure made in 18mm thick Pre-laminated particle board with appropriate edge banding and drawer base shall be 9mm thick. To protect the wall from kicks, abrasion and serve as a decorative moulding skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certificaton. The board used should meet international standards of quality and safety, Indian standard IS12823 grade II should meet long time loadbending, screw–withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. |
| 60 | Supplying & Placing workstation table in completely knock down conditions with an overall size 1800mm X 13000mm X 1200/750mm that is to be assembled at site. The worktop shall have the size 1500mm/600mm X 1500mm/600mm made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top profile shall be in curvilinear shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on particle board base gable end. The end wall of the top shall be topped by gable end. It should be made up of 25mm thick Pre-laminated particle board and the profile shall be in linear shape with appropriate PVC edge banding. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 550mm X 280mm. The trey shall be operated on keyboard channel. The workstation shall have panel based partition of 60 mm thick with overall height 1200mm. The partition shall be linear in profile and provided in front side of user. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with 40-60µ thick. The trims shall have the size 60mm X 19mm with 1.5mm thick covered with Die cast end caps on joints 2 ways, 3 ways & 4 ways (L-cover for corner, T-cover for middle section wherever required). The aluminium raceway shall be situated below the worktop with an overall size 116mm(H) X 60mm(D) with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) provided at front of the user. Laminated bottom tile shall be situated below the work top. The Partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. Zinc coated small top support brackets shall be fixed on the partition for table top support. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be situated at bottom. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted on injection moulded nylon castor. A nylon castor based CPU unit shall be provided with an overall size 470mm X 286mm with 18mm thick Pre-laminated particle board. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. . the manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table |
| 61 | Three Seater Sofa, Wooden Frame, Wooden Gold Plated Leg, Size (in mm): 2120(L) X 900(D) X 850(H), the manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table |
| 62 | Two Seater Sofa, Wooden Frame, Wooden Gold Plated Leg, Size (in mm): 1520(L) X 900(D) X 850(H) the manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table |
| 63 | Single Seater Sofa, Wooden Frame, Wooden Gold Plated Leg, Seat Back Asmara Fine Leatherette Tapestry Size (in mm): 920(L) X 900(D) X 850(H) the manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table |
| 64 | Supplying & placing center table with an overall size 1200mm X 600mm X 450mm. The top shall be made up of 12mm thick toughened glass. The profile shall be in rectangle shape with bevelled edges. The bottom storage shelf shall be provided with an overall size 1155mm X 280mm made of 8mm thick toughened glass with bevelled edges. The glass shall be supported on vacuum caps situated over SS 202 grade pipe frame. The under structure shall have SS pipe frame having size 67mm X 13.5mm. There shall be PPCP shoe provided to avoid scratches on the floor.the manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table |
| 65 | Corner Table, SS 202 Grade Frame Wooden Top with Hydrographic Printing Gold Plated Frame, the manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-45001,ISO 50001 by NABCB, BIFMA membership and AIOTA certification OEM Should be BIS Certified, and IAQ Certifed in seating, storage, workstation and table |
| 66 | Wooden almirah W2.5xH8xD1.5 ft |
| 67 | TV unit 62x42 inch |
| 68 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 2591.00; H = 3000.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2) 12MM TOUGHENED GLASS |
| 69 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 2591.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2) 8MM CLR TOUGHENED |
| 70 | SHCWF OUTWARD OPENSystem : SCHUCO AW 40.NIDimension : W = 5207.00; H = 3000.00Profile Color : Powder Coating - Matte GreyHandle Type : S1-Espag HandleHardware color : BlackMeshType : NoGlass:(1,2,3,4,5) 12MM TOUGHENED GLASS |
| 71 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 5207.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3,4) 8MM CLR TOUGHENED |
| 72 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 1981.00; H = 3000.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2) 12MM TOUGHENED GLASS |
| 73 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 1981.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2) 8MM CLR TOUGHENED |
| 74 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 4394.00; H = 3000.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3) 12MM TOUGHENED GLASS |
| 75 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 4394.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3) 8MM CLR TOUGHENED |
| 76 | SHCWF OUTWARD OPENSystem : SCHUCO AW 40.NIDimension : W = 5182.00; H = 3000.00Profile Color : Powder Coating - Matte GreyHandle Type : S1-Espag HandleHardware color : BlackMeshType : NoGlass:(1,2,3,4,5) 12MM TOUGHENED GLASSRemarks : MS STRUCTURE IN CLIENT SCOPE |
| 77 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 5182.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3,4) 8MM CLR TOUGHENED |
| 78 | FW40MMSystem : SCHUCO AW 40.NIDimension : W = 914.00; H = 610.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1) 8MM T ACID WASH |
| 79 | FW50MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AWS/ADS 50.NIDimension : W = 6528.00; H = 3000.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3,4) 12MM TOUGHENED GLASS |
| 80 | FW50MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AWS/ADS 50.NIDimension : W = 6528.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3,4) 8MM CLR TOUGHENED |
| 81 | SHCWF OUTWARD OPENSystem : SCHUCO AW 40.NIDimension : W = 5486.00; H = 3000.00Profile Color : Powder Coating - Matte GreyHandle Type : S1-Espag HandleHardware color : BlackMeshType : NoGlass:(1,2,3,4,5) 12MM TOUGHENED GLASSRemarks : MS STRUCTURE IN CLIENT SCOPE |
| 82 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 5486.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3,4) 8MM CLR TOUGHENED |
| 83 | SHCWF OUTWARD OPENSystem : SCHUCO AW 40.NIDimension : W = 3988.00; H = 3000.00Profile Color : Powder Coating - Matte GreyHandle Type : S1-Espag HandleHardware color : BlackMeshType : NoGlass:(1,2,3,4,5) 12MM TOUGHENED GLASSRemarks : MS STRUCTURE IN CLIENT SCOPE |
| 84 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 3988.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3,4) 8MM CLR TOUGHENED |
| 85 | SHCWF OUTWARD OPENSystem : SCHUCO AW 40.NIDimension : W = 3912.00; H = 3000.00Profile Color : Powder Coating - Matte GreyHandle Type : S1-Espag HandleHardware color : BlackMeshType : NoGlass:(1,2,3,4,5) 12MM TOUGHENED GLASSRemarks : MS STRUCTURE IN CLIENT SCOPE |
| 86 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 3912.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3,4) 8MM CLR TOUGHENED |
| 87 | SHCWF OUTWARD OPENSystem : SCHUCO AW 40.NIDimension : W = 3124.00; H = 3000.00Profile Color : Powder Coating - Matte GreyHandle Type : S1-Espag HandleHardware color : BlackMeshType : NoGlass:(1,2,3,4,5) 12MM TOUGHENED GLASSRemarks : MS STRUCTURE IN CLIENT SCOPE |
| 88 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 3124.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3,4) 8MM CLR TOUGHENED |
| 89 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 3988.00; H = 3000.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3) 12MM TOUGHENED GLASS |
| 90 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 3988.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3) 12MM TOUGHENED GLASS |
| 91 | SHCWF OUTWARD OPENSystem : SCHUCO AW 40.NIDimension : W = 3937.00; H = 3000.00Profile Color : Powder Coating - Matte GreyHandle Type : S1-Espag HandleHardware color : BlackMeshType : NoGlass:(1,2,3,4,5) 12MM TOUGHENED GLASSRemarks : MS STRUCTURE IN CLIENT SCOPE |
| 92 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 3937.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3,4) 8MM CLR TOUGHENED |
| 93 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 3988.00; H = 3000.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3) 12MM TOUGHENED GLASS |
| 94 | FW40MM MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AW 40.NIDimension : W = 3988.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3) 12MM TOUGHENED GLASS |
| 95 | FW40MMSystem : SCHUCO AW 40.NIDimension : W = 3023.00; H = 3000.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3) 12MM TOUGHENED GLASS |
| 96 | FW40MMSystem : SCHUCO AW 40.NIDimension : W = 3023.00; H = 600.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3) 12MM TOUGHENED GLASS |
| 97 | FW40MMSystem : SCHUCO AW 40.NIDimension : W = 1499.00; H = 610.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1) 8MM T ACID WASH |
| 98 | SW2PN2 AS 30 SC.NISystem : SCHUCO AS SC 30.NIDimension : W = 991.00; H = 1219.00Profile Color : Powder Coating - Matte GreyHandle Type : S2-Retaining Latch As 30 SeriesHardware color : BlackMeshType : NoGlass:(1,2) 8MM CLR TOUGHENED |
| 99 | FW40MMSystem : SCHUCO AW 40.NIDimension : W = 991.00; H = 1219.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1) 8MM CLR TOUGHENED |
| 100 | SKYLIGHT AOC 50 MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AOC 50 STDimension : W = 16296.00; H = 4294.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27) FACADE 13.52MM (6HS+1.52PVB+6T) |
| 101 | SKYLIGHT AOC 50 MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AOC 50 STDimension : W = 14071.00; H = 7475.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36)FACADE 13.52MM (6HS+1.52PVB+6T) |
| 102 | SKYLIGHT AOC 50 MS STRUCTURE IN CLIENT SCOPESystem : SCHUCO AOC 50 STDimension : W = 15040.00; H = 6672.00Profile Color : Powder Coating - Matte GreyMeshType : NoGlass:(1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36)FACADE 13.52MM (6HS+1.52PVB+6T) |
| 103 | Zebra binds forwalls |
| 104 | Skylight blinds |
| 105 | Motor for blinds |
| 106 | Design, Manufacturing, Supply , Installation and Testing of unit/s including free maintenance of passenger Lift capacity of 8 person/ 544 kg, with 5 stops, 1.00 mps . (Make Schindler, Mitsubishi etc.) |
| 107 | Air Conditioners - Hot & Cold -4 Way Cassette AC- 3.5 TR- Hot & Cold (Make Daikin , Blue star etc.) |
| 108 | Installation , testing and commissioning of Air-cooled type airconditioning outdoor and indoor including lifting shifting, hanging, fixing etc incuding fastners, threaded rods and other required material for- 3.5 TR- Cassette AC |
| 109 | Supplying, installation, testing and commissioning of following sizes of refrigerant copper piping work with 19/13mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor and outdoor units Circuits as per specifications-3.5 Tr Circuit :Piping will be measured as a pair:-(Mandev/Max Flow/ Total Line/ RajcoCopper/Hari-om Piping )A-Flex/K-flex/ |
| 110 | Supply and installation of HARD PVC Drain pipe25/32 mm PVC Drain Piping duly insulated for condensate water drainage upto nearest floor trap. |
| 111 | Supply, Installation, Testing and Commissioning of control cum transmission wiring copper wire in suitable PVC conduits between indoor & outdoor |
| 112 | Stands For ODU-Providing and fixing of Iron Frame for Outdoor Units- 3.5 TR Circuit |
| 113 | SUPPLY OF ELECTRICAL GOODS-1x4 Panel Light- Jaquar Make |
| 114 | Supply of Exhaust Fan 510 mm sweep complete in all respect. |
| 115 | Conceled Light 3\\" round 20 watt |
| 116 | RJ Port (white) Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
