|
| 1 | Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 50 m, dressing.DAR 2.8.1 |
| 2 | Providing & Laying Cement concrete 1:6:12 brick ballast (40mm nominal size) etc. As per S.I No-273 |
| 3 | Earth work Filling of in plinth under floor including watering, ramming, consolidation & dressing etc.complete as per Dar 2.25 a |
| 4 | Class 150 brick work in 1:4 cement and c-sand etc. DAR 6.1.1 in Foundation |
| 5 | Class 150 brick work in 1:4 cement and C-sand etc. As per DAR 6.4.1 in Super Structure |
| 6 | Providing & Laying in Reinforced cement concrete 3:1.5:1 of not less than strength of M 150 stone ballast (20 mm Nominal size) 1.5 approved coarse sand : 1 cement incluing supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete including cost of form work in foundation and fllors. DAR 5.1.2 |
| 7 | Miled steel or iron in plain work such as reinforced concrete or reinforced brick work (When not wrougt to include in over all rates) wrought to required shape as mecessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured upto floor two level. |
| 8 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. when not wrought to required) from including supply of steel & its wastage including cost of bolts,nuts.if required for and welding,grinding and making holes as required for proper completion of the work SI No 21 DAR 10.25.2 |
| 9 | 12mm thick plaster with cement approved c- sand in 1:4 including supply of all materials labour and T&P etc. required for proper completion of the work. DAR 13.4.1 |
| 10 | Painting two coat synthetic enamel paint over and including priming coat on new steel or other metal/ wooden surface upto 10cm width or girth in small article not exceeding 0.10 sqm area after and including preparation of surface by throughly cleaning oil, grease, dirt and foreign matters and scored by wire brushes fan steel wood rapers and preparing and knotting including cost of all materials, labours,T&P etc required for proper Completion of the work S.I no. 641+642 |
| 11 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete DSR 13.80 |
| 12 | Distempering (Two coat with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as Berger, J & N Shalimar. Asian paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials. (upto floor two level SI No. 649+650 |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specifed by the manufacyor) with water absorption less than 0.08% and conforming to Is : 15622, ….etcwith 1:3 cement and approved coarse sand mortar nished with white cement slurry, jointing and polishing complete including supply of all materials, labour and T&P etc. required by proper completion of the work. (As perSOR CHPT 11 (600x600mm) as per SI No 15 |
| 14 | Centring and shuttring beam as per DAR 5.9.5 |
| 15 | Centring and shuttring Column as per DAR 5.9.6 |
| 16 | Centring and shuttring Slab as per DAR 5.93 |
| 17 | Providing & laying Cement Concrete 1:2:4 (1 cement 2 coarse sand: 4graded stone ballast 20mm nominal size) including supply of all material labour and T&P etc. required for proper completion of the work and curing complete also including cost of formwork in Filling hole fast upto floor two level DAR 4.1.3 |
| 18 | Wiring point for light with 1 sq mm FR PVC insulated multistrand, single core copper conductor cable in heavy duty PVC conduit pipe partly concealled in Wall and partly laid in slab along with the reinforcement before concreting with one no 1.5 Sq mm FR PVC insulated multistrand copper conductor cable as earth wire drawn in side the onduit pipe Piano type switch and celling rose/angle/batten holder on 3 mm thick phenolic laminated backlight sheet etc. complete in all respect (S.I.No.138-C)+187 (A) |
| 19 | Wiring point for fan/fresh air fan (light duty exhaust fan) with 1 sq mm FR PVC insulated multistrand, single core copper conductor cable in heavy duty PVC conduit pipe partly concealled in Wall and partly laid in slab along with the reinforcement before concreting with one no1.5 Sq mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit pipe, Piano type switch and celling rose on 3mm thick phenolic laminated backlight sheet etc. complete in all respect.(S.I. No.140-C)+187 (A) |
| 20 | Wiring point for plug with 1.00 sq mm FR PVC insulated multistrand single core copper conductor cable in heavy duty PVC conduit pipe concealled in the partly wall and partly in slab with one no 1.5 Sq mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit pipe, Piano type switch and socket on 3 mm thick phenolic laminated bakelite sheet etc. complete in all respect. (S.I. No. 134-C) +187 C |
| 21 | Supply and wiring of submain with two number 2.5 sq mm FR PVC insulated 1100V grade multistrand, single core copper conductor cable in 20 mm dia heavy duty PVC conduit pipe partly laid in slab along with the reinforcement before concreting and partly concealed in wall complete with one number 1.5 sqmm FR PVC insulated 1100V Grade multistrand single core copper conductor cable as earth continuty wire drawn inside the conduit etc. complete in all respects. (S.I. No.1307-C) |
| 22 | Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc.complete in all respect. SI No 1120 |
| 23 | Supply & fixing of 63 Amp. DP Isolator. SI No 1005 B CAT -A |
| 24 | Supply & fixing of 6 Amp to 32 Amp. MCB (10 KA) C Curve . SI No 1002 cat A |
| 25 | Supply & fixing CELLING fan bajaj/ havels complete in all respect. MR |
| 26 | S/F of round junction box cover of 3 mm thick bakelite sheet on existing junction box with the help of brass M/C screw and cup washer complete as per direction of E/I. |
| 27 | Supply and fixing of surface/flush mounting 4 ways SPN distrubution board (legrand Lexic) without MCB with additional metal door complete in all respects and as directed at site by the E/I. SI No-1022 (A) |
| 28 | Supply & fiixing of LED BULB approved Brand (Market Rate) |
| 29 | Supply & fiixing of LEDTube light approved Brand (Market Rate) |
| 30 | Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 50 m, dressing.DAR 2.8.1 |
| 31 | Providing & Laying Cement concrete 1:6:12 brick ballast (40mm nominal size) etc. As per S.I No-273 |
| 32 | Earth work Filling of in plinth under floor including watering, ramming, consolidation & dressing etc.complete as per Dar 2.25 a |
| 33 | Class 150 brick work in 1:4 cement and c-sand etc. DAR 6.1.1 in Foundation |
| 34 | Class 150 brick work in 1:4 cement and C-sand etc. As per DAR 6.4.1 in Super Structure |
| 35 | Providing & Laying in Reinforced cement concrete 3:1.5:1 of not less than strength of M 150 stone ballast (20 mm Nominal size) 1.5 approved coarse sand : 1 cement incluing supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete including cost of form work in foundation and fllors. DAR 5.1.2 |
| 36 | Miled steel or iron in plain work such as reinforced concrete or reinforced brick work (When not wrougt to include in over all rates) wrought to required shape as mecessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured upto floor two level. |
| 37 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. when not wrought to required) from including supply of steel & its wastage including cost of bolts,nuts.if required for and welding,grinding and making holes as required for proper completion of the work SI No 21 DAR 10.25.2 (A)Fabrication of angle Iron door chaukhats Angle (40x40x5mm) 3.0kg/sqm (B)Fabrication of grill |
| 38 | 12mm thick plaster with cement approved c- sand in 1:4 including supply of all materials labour and T&P etc. required for proper completion of the work. DAR 13.4.1 |
| 39 | P/Laying Of 1st Ceramic glazed tiles in 300x300mm flooring or or in skirting or dado laid with 1:4 cement and approved coarse sand mortar nished with white cement slurry, jointing and polishing complete including supply of all materials, labour and T&P etc. required by proper completion of the work. DAR 11.37 |
| 40 | Painting two coat synthetic enamel paint over and including priming coat on new steel or other metal/ wooden surface upto 10cm width or girth in small article not exceeding 0.10 sqm area after and including preparation of surface by throughly cleaning oil, grease, dirt and foreign matters and scored by wire brushes fan steel wood rapers and preparing and knotting including cost of all materials, labours,T&P etc required for proper Completion of the work S.I no. 641+642 |
| 41 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete DSR 13.80 |
| 42 | Distempering (Two coat with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as Berger, J & N Shalimar. Asian paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials. (upto floor two level SI No. 649+650 |
| 43 | Centring and shuttring beam as per DAR 4.3.2 |
| 44 | Providing & laying Cement Concrete 1:2:4 (1 cement 2 coarse sand: 4graded stone ballast 20mm nominal size) including supply of all material labour and T&P etc. required for proper completion of the work and curing complete also including cost of formwork in Filling hole fast upto floor two level DAR 4.1.3 |
| 45 | Providing and fixing water closet squatting pan (Indian type W C pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P V.C. flushing cistern, including mush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integra type foot rests As Per DSR Analysis 17.1.1 |
| 46 | Providing and fixing wash basin with C I, brackets, 15 mm C. P. brass pillar tap 32 mm C.P. brass waste of standard pattern, including painting of fittings ar brackets, cutting and making good the walls wherever require ja) White Vitreous China Flat back wash basin size 550x 400 mm wi single 15 mm C.P. brass pillar tappillar lap As Per DSR Analysis 17.7.4 |
| 47 | Providing and fixing fexible P V.C. waste pipe for sink or wash basin includi PVC waste fittings complete. Semi rigid pipe As Per DSR Analysis 17.28.1.1 |
| 48 | Providing and fixing 600x450 mm beveled edge mimor of superior glass approved complete with 6 mm thick hard board ground fixed to wood cleats with CP, brass screws and washers complete. As Per DAR 17.31 |
| 49 | Providing and fixing PTMT Liquid soap disk / container 109 nim wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same As Per DSR Analysis 17.71 |
| 50 | Providing and fixing on wall face unplasticised Rigid Pvc rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion Single socketed pipes. a) 110mm diameter As Per DSR Analysis 12.41.2 |
| 51 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions a) 15mm nominal bore As Per DSR Analysis 18.21.2.1 |
| 52 | Providing & fixing CP brass bib cock of approved quality conforming to IS 893 P. 61 a) 15mm nominal bore As Per DSR 18.15.1 |
| 53 | Providing & fixing C.P, brass angle valve for basin mixer and gyser points o approved quality conforming to IS 893 l a) 15mm nominal bore As Per DSR 18.53 |
| 54 | Providing and fixing gun metal gate valve with wheel of approved quality. a) 25mm dia nominal bore As Per DSR 18.17.1 |
| 55 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank a) Circular Tank As Per DSR Analysis 18.48.(A) 2x 500 = 1000 ltr |
| 56 | S/F of 1.0 HP Moter & Summersable Boring with all Material , Labour etc all complite as per MR. |
| 57 | S/F of G/I Sign board granite etc all comp |
| 58 | Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 50 m, dressing.DAR 2.8.1 |
| 59 | Providing & Laying Cement concrete 1:6:12brick ballast (40mm nominal size) etc. As per S.I No-273 |
| 60 | Class 150 brick work (one brick thick wall) in 1:4 Cement and Coarse Sand (F.M 1,5 to 2.00) mortar in super structure above plinth level up to floor two level (up to two storey including necessary cutting and moulding of brick work as required and also including supply of all materails, labour and tools and plants etc. required for proper completion of the work As per DAR 6.1.1 |
| 61 | Providing & laying Cement Concrete 1:2:4 (1 cement 2 coarse sand: 4graded stone ballast 20mm nominal size) including supply of all material labour and T&P etc. required for proper completion of the work and curing complete also including cost of formwork in Filling hole fast upto floor two level DAR 4.1.3 |
| 62 | 20mm thick cement plaster in dado / skirting in 1:2 consistingof onepart of cement and 2parts of approved coarse sand laid inplanels , finishad with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T&P etc. required for proper completion of the work. As per SI no. 597 |
| 63 | GST18% Please Enable Macros to View BoQ information |
