|
| 1 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at asuitable place with in a distance of 100Mtrs of the complex complete in all respect.(CSR item no 30.95) |
| 2 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place with in a distanceof 100 Mtrs of the complex complete in all respect. (CSR item no.30.94) |
| 3 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Glossfinish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (CSR item no. 14.127) |
| 4 | Providing and laying Rectified Porcelin floor tiles 400x400mmormore (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622of approvedmake inall colours laid on20mm thick bedofCemen tMortar 1:4 ( 1Cement : 4Finesand) for new flooring complete . (CSR item no. 14.122) |
| 5 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete.(a) size 600x600mm (CSR item no. 14.133) |
| 6 | Dismantling concrete or precast concrete. (CSR item no. 8.6 e) Reinforced Cement concrete. |
| 7 | RCC M-20 mechanically batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure [CSR. Item no. 10.20]. |
| 8 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete (CSR item no. 18.19 ) |
| 9 | Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc (CSR item no. 9.8) |
| 10 | Marble stone flooring with 12-15 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :(vi) Morward marble marble tiles of varoius sizes 12mm to 50mm thick (b) slab sizes above 0.50 Sqm. [ CSR item no. 14.74 (vi) (b)] |
| 11 | Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.) ( CSR item no. 14.75) |
| 12 | Steel work fixed independently without connecting plates including cutting hoisting and fixing in position (a) R.S joist [CSR Item No. 18.1 a] |
| 13 | Dismantling brick work tile, masonry or tile lining (b) in cement [CSR item no. 8.5 b ] |
| 14 | Removing of doors (AOR) |
| 15 | Removing and Refixing of doors (AOR) |
| 16 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. (CSR item no. 16.20) |
| 17 | Painting two or more coats with aluminum paint to give an even shade excluding priming coat (CSR item no. 16.25) |
| 18 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges 35 mm thick. [CSR item no. 17.27 (iv) (a)] |
| 19 | Wire gauze door shutter with Kail wood without springs housed in chowkats (Single Leaf) 35mm thick .[ CSR item No. 17.17 (ii) (a)]. |
| 20 | Cement Concrete 1:2:4 with stone ballast (ii) using mechanical means using concrete mixer volumetric type [CSR item no. 10.13 (a) (ii)]. Please Enable Macros to View BoQ information |
