|
| 1 | Ground Floor |
| 2 | Earth work in excavation of foundation trenches in all kids of soil including dressing and leavelling the bed upto the required depth and depositing the excaveted materials with all leads & lifts T&P Shoring and shuttering watering if necessary etc. complete as per directed by the Engineer-in-charge |
| 3 | Supplying and filling foundation and plinth with sand watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete (measurement will be taken on finished compacted section only) as directed by the Engineer-in Charge. |
| 4 | Cement concrete (1:3:6) using approved quality from approved quarry including lowering laying concrete watering and curing etc. as required levels laid in layers not exceeding(0'-6'') 15 cm thick including cost, conveyance,royalities and taxes of all materials and cost of all labour ,T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge . |
| 5 | R.C.C. work M-25 in grade having a minimum compressive strength (in work test) 150 kg/cm2 in 15cm cubes at 28 days using 12mm. & down grade hard granite C.B. chips of approved quality and from approved quarry including watering, lowering laying concrete, compacting with vibrators, curing for 28 days with smooth etc complete |
| 6 | Column base-Column Foundation |
| 7 | Grade Beam |
| 8 | R.C.C. Columns |
| 9 | R.C.C. Lintel |
| 10 | R.C.C.Beam |
| 11 | R.C.C. Stair case |
| 12 | R.C.C. Stair case |
| 13 | Supplying Cutting,bending un- coated HYSD bars,for reinforcement tying the grills and placing in position as required for the RCC works and for providing fan hooks hoisting and lowering,laying including cost,conveyance & taxes of SYSD bars and binding wires of 18 to 20 gauge required for the work and bending binding and tying the grills . |
| 14 | Fly ash bricks masonary incm (1:6) after immersing the bricks 6 hrs. in water before use in Foundation and plinth having C.S. 75kg/cm2 in cluding all cost, carriage, royality etc. complete. |
| 15 | Fly ash bricks masonary in cm (1:6) in Superstructure after immersing the bricks 6 hrs. In water before use in all floors having C.S. 75kg/cm2 in cluding all cost, carriage, royality etc. complete. |
| 16 | 12 mm thick cement plaster in cm (1:6) over brick wall finished smooth after raking out the joints including watering, curing with cost, conveyence etc.complete. |
| 17 | 16 mm thick cement plaster in cm (1:6) over brick wall finished smooth after raking out the joints including watering, curing with cost, conveyence etc.complete.In Side Wall Surface |
| 18 | 6mm thick cement plaster in C.M. [1:4] finished smooth to exposed R.C.C. work with cost of all materials labor etc. complete. In Side Ceilling Surface |
| 19 | Fixing of vetrified tiles in floors of Size 600x600mm of approved make coformaing to I.S:13755 laid on on 25mm thick bed of Cement mortar 1:4 ( 1 Cement : 4 sand ) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. ( For new work)with cost of all materials labor etc. complete. |
| 20 | Fixing of antiskid ceramic floor tiles of Size 30cmx30cm / 40cmx40cm special plane / printed series of premium grade having thickness 7mm to 8mm confirming to IS 13753 laid on on 25mm thick bed of Cement mortar 1:4 ( 1 Cement : 4 sand ) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles with cost of all materials labor etc. complete. |
| 21 | Fixing of Vetrified tiles in dados, skirting riser of stepps 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles . |
| 22 | Fixing of Ceramic wall tiles on wall 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles . |
| 23 | Providing and fixing of fixed windows / ventilators of approved make to be fabricated from roll formed sections made of pre painted steel (base steel as per IS:513 of 0.60mm thick \\"D\\" quality,Galvanized as per IS:277 with zinc of 120 Gm/Sq.mtr)with paint specification being with primer of 5/7 microns & finished paint with polyster paint (Black/peral white/ chocolate Brown) of 12-16 microns along with the alkyd backer at the back of 5-7 microns & the sizes of outer frame being of 46 X52mm & with all vertical & horizontal mullions are of 46 X70mm & fixed beadings are of 18 X25 mm .Accessories /gasket are to be used as per the manufacturs supply & Specification like handle being made of hygrade aluminium powder coated & with Nylon receiver & gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating.The mullions caps & louvered-clips should be of glass filled nilon. The sections are to be cut length miter joint with corner bracket & frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used 5mm reflective with all taxes complete.(Analysis 2006 page-251,item-15) |
| 24 | Providing and fixing 30mm thick Alluminium Door shutter confirming to IS:2002 (Part-1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters inclusive of 4 nos of Stainless steel But Hinges(100mmx60mmx2.5mm),40mm stainless steel screws, CylindricalLock(Godrej-9843), Tower Bolt SS10x300mm (Bath room ) (Godrej-3264) , PVC Door Buffer with SSscrew, teak wood leaping around the edges & paste with1.5 mm thick laminate on both side of the flush door, etc incuding the cost of all materials, hard ware fittings, cost all labour, conveyance, loading unloading, T&P etc. complete as per the direction of Engineer -in charge. |
| 25 | Providing supplying M.S. grill made out of 12mm sq. bar and 25x6mm M.S. angle of approved desing including all cost etc. complete. |
| 26 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification etc all completed. |
| 27 | Finishing wall surfaces with Acrylic wall putty (Water based) of approved make and finished smooth and even surfaces to receive painting including cost of all materials taxes, labour T&P etc. |
| 28 | Finishing wall surface with weather coat painting 2 coat over a coat of primer to the new surfaces of walls with all cost. |
| 29 | Wall painting 2-coats with plastic emulsion paint of approved shade over a coat of primer on new work including cost of paint. |
| 30 | Painting 2-coats with any approved paint over one coat of primer on new wood or iron work including cost of materials. |
| 31 | First Floor |
| 32 | R.C.C. work M-25 in grade having a minimum compressive strength (in work test) 150 kg/cm2 in 15cm cubes at 28 days using 12mm. & down grade hard granite C.B. chips of approved quality and from approved quarry including watering, lowering laying concrete, compacting with vibrators, curing for 28 days with smooth etc complete |
| 33 | Column upto Roof Slab bottom level |
| 34 | R.C.C. Lintel |
| 35 | R.C.C.Beam |
| 36 | R.C.C. Stair case |
| 37 | R.C.C. Roof Slab |
| 38 | Supplying Cutting,bending un- coated HYSD bars,for reinforcement tying the grills and placing in position as required for the RCC works and for providing fan hooks hoisting and lowering,laying including cost,conveyance & taxes of SYSD bars and binding wires of 18 to 20 gauge required for the work and bending binding and tying the grills . |
| 39 | Fly ash bricks masonary in cm (1:6) in Superstructure after immersing the bricks 6 hrs. In water before use in all floors having C.S. 75kg/cm2 in cluding all cost, carriage, royality etc. complete. |
| 40 | 12 mm thick cement plaster in cm (1:6) over brick wall finished smooth after raking out the joints including watering, curing with cost, conveyence etc.complete. |
| 41 | 16 mm thick cement plaster in cm (1:6) over brick wall finished smooth after raking out the joints including watering, curing with cost, conveyence etc.complete.In Side Wall Surface |
| 42 | 6mm thick cement plaster in C.M. [1:4] finished smooth to exposed R.C.C. work with cost of all materials labor etc. complete. In Side Ceilling Surface |
| 43 | Fixing of vetrified tiles in floors of Size 600x600mm of approved make coformaing to I.S:13755 laid on on 25mm thick bed of Cement mortar 1:1 ( 1 Cement : 1 sand ) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. ( For new work)with cost of all materials labor etc. complete. |
| 44 | Fixing of antiskid ceramic floor tiles of Size 30cmx30cm / 40cmx40cm special plane / printed series of premium grade having thickness 7mm to 8mm confirming to IS 13753 laid on on 25mm thick bed of Cement mortar 1:1 ( 1 Cement : 1 sand ) and filling joint with white Cement of approved quality in slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles with cost of all materials labor etc. complete. |
| 45 | Fixing of Vetrified tiles in dados, skirting riser of stepps 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles . |
| 46 | Fixing of Ceramic wall tiles on wall 20cmx30cm / 20cmx20cm special plane / printed series of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of tiles . |
| 47 | Providing and fixing of fixed windows / ventilators of approved make to be fabricated from roll formed sections made of pre painted steel (base steel as per IS:513 of 0.60mm thick \\"D\\" quality,Galvanized as per IS:277 with zinc of 120 Gm/Sq.mtr)with paint specification being with primer of 5/7 microns & finished paint with polyster paint (Black/peral white/ chocolate Brown) of 12-16 microns along with the alkyd backer at the back of 5-7 microns & the sizes of outer frame being of 46 X52mm & with all vertical & horizontal mullions are of 46 X70mm & fixed beadings are of 18 X25 mm .Accessories /gasket are to be used as per the manufacturs supply & Specification like handle being made of hygrade aluminium powder coated & with Nylon receiver & gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating.The mullions caps & louvered-clips should be of glass filled nilon. The sections are to be cut length miter joint with corner bracket & frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used 5mm reflective with all taxes complete.(Analysis 2006 page-251,item-15) |
| 48 | Providing and fixing 30mm thick Alluminium Door shutter confirming to IS:2002 (Part-1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters inclusive of 4 nos of Stainless steel But Hinges(100mmx60mmx2.5mm),40mm stainless steel screws, CylindricalLock(Godrej-9843), Tower Bolt SS10x300mm (Bath room ) (Godrej-3264) , PVC Door Buffer with SSscrew, teak wood leaping around the edges & paste with1.5 mm thick laminate on both side of the flush door, etc incuding the cost of all materials, hard ware fittings, cost all labour, conveyance, loading unloading, T&P etc. complete as per the direction of Engineer -in charge. |
| 49 | Providing supplying M.S. grill made out of 12mm sq. bar and 25x6mm M.S. angle of approved desing including all cost etc. complete. |
| 50 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification etc all completed. |
| 51 | Finishing wall surfaces with Acrylic wall putty (Water based) of approved make and finished smooth and even surfaces to receive painting including cost of all materials taxes, labour T&P etc. |
| 52 | Finishing wall surface with weather coat painting 2 coat over a coat of primer to the new surfaces of walls with all cost. |
| 53 | Wall painting 2-coats with plastic emulsion paint of approved shade over a coat of primer on new work including cost of paint. |
| 54 | Painting 2-coats with any approved paint over one coat of primer on new wood or iron work including cost of materials. |
| 55 | Mummty Floor |
| 56 | Column upto Roof Slab bottom level |
| 57 | R.C.C.Beam |
| 58 | R.C.C. Roof Slab |
| 59 | Supplying Cutting,bending un- coated HYSD bars,for reinforcement tying the grills and placing in position as required for the RCC works and for providing fan hooks hoisting and lowering,laying including cost,conveyance & taxes of SYSD bars and binding wires of 18 to 20 gauge required for the work and bending binding and tying the grills . |
| 60 | Fly ash bricks masonary in cm (1:6) in Superstructure after immersing the bricks 6 hrs. In water before use in all floors having C.S. 75kg/cm2 in cluding all cost, carriage, royality etc. complete. |
| 61 | 12 mm thick cement plaster in cm (1:6) over brick wall finished smooth after raking out the joints including watering, curing with cost, conveyence etc.complete. |
| 62 | 16 mm thick cement plaster in cm (1:6) over brick wall finished smooth after raking out the joints including watering, curing with cost, conveyence etc.complete.In Side Wall Surface |
| 63 | Providing supplying M.S. gate made out of 12mm sq. bar and 25x6mm M.S. angle of approved desing including all cost etc. complete. |
| 64 | Finishing wall surface with weather coat painting 2 coat over a coat of primer to the new surfaces of walls with all cost. |
| 65 | Wall painting 2-coats with plastic emulsion paint of approved shade over a coat of primer on new work including cost of paint. |
| 66 | Painting 2-coats with any approved paint over one coat of primer on new wood or iron work including cost of materials. |
| 67 | 10KW SOLAR PANEL |
| 68 | Supply installation testing & commission of 10000wp + / latest size Non DCR . Make- Iconic/Sova or Eqv. |
| 69 | Supply installationStracture |
| 70 | Supply installation testing & commissioning of Off grid hybrid inverter. DC capacity-8KVA-100 Volt Make- Luminous/ Startcon |
| 71 | Supply installation testing & commission of BoS1. ACDB2. DCDB3. AJB4. LA5. Earthing6. Battery stand7. Inverter stand8. Inverter fittings9. Cable terminal10. Ring pins11. AC cable12. Electrical fittings13. Stractrural fittings14. 10sqmm earthing cable15. BFC16. Earthing electrode17. Earthing pit cover |
| 72 | Supply installation testing & commission of Battery 200Ah C10, S-Tubular , Back up 4 to 4.5 hour, Solar batteryMake-Exide/luminous or Eqv. |
| 73 | Installation including Civil work - at customer scope PV mounting Stractrural fittings Inverter mounting Testing And commissioning, Transportation, Loading and unloading |
| 74 | 8 PASSENGER LIFT |
| 75 | Supply, Installation, Testing & Commissioning of of 08 Passenger-cum-bed lift gearless with Machine room LESS Capacity 1020 kg, Elevator (Shaft size should not be less than-2100mm(Left to right)x2100mm(Front to back)) with ACVVVF drive/Control for constant load of 1020 kg ARD >=1.25 MPS SS honeycomb interior, 2hr fire rated door with simplex operation without attendant car position indicators, battery operated alarm bell & emegency light, SS honeycomb finish door finished car interior, recess Granite flooring, power operated centre opening automatic sliding SS honeycomb finish doors for car entrance & hoist way entrance etc All SS materials shall be of grade SS-304 with thickness not less than 1.6mm. Machine beams, buffer support channels, facia plate including sills pit ladder metal screen in Elevator pit etc.as per specifiaction including cost of (i) Overload detection, (ii) Voice announcement, (iii) Intercom, (iv)Braille Buttons (v) provision of flat cat-6 cable for cctv with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room less, scaffolding, floor cutting including Fireman's switch complete in all respect. The Elevator should be suitable for stretcher lift & physically handicapped person. Make: OTIS/Mitsubishi/TKE/Schindler |
| 76 | INTERNAL ELECTRICAL WORKS WITH DATA N/W, IP EBAX SYSTEM |
| 77 | Circuit Cum Wiring |
| 78 | Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface / recessed 1.6 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. |
| 79 | Single light point controlled by one 6A switch or first light point of group control. |
| 80 | Subsequent point of group control |
| 81 | Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required.(Excluding rate of MCB) |
| 82 | Single light point controlled by one 6A MCB or first light point of group control. |
| 83 | Subsequent point of group control |
| 84 | Supplying & Wiring for twin control light point with 1.5 Sqm.m FRLS PVC insulated copper condutor single core cable in surface / recessed PVC conduit 2 way modular switch,modular plate,suitable GI box and earthing the point with 1.5 Sqm.m .FRLS PVC insulated copper conductor single core cable etc as required. |
| 85 | Supplying and fixing two module steeped type electronic fan regulator with proper modular plate switch box including connections etc. as required. |
| 86 | Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing board. |
| 87 | Supplying & fixing suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 3pin 5/6 amps modular socket outlet and 5/6 amps modular switch etc. as required. |
| 88 | Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular shuttered plug socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge. |
| 89 | Supplying, installation, testing & commissioning of 20 Amp AC starter switch with 25 Amp modular socket outlet with 25 Amp Plug on surface or in recess, on 2 Nos two module GI box with plate etc. complete with direction of Engineer-in-charge. Starter-Crabtree(cat no-ACT0202504) or equivalent. |
| 90 | Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required. |
| 91 | 2X2.5 + 1X2.5 sqmm FRLS Cu wire |
| 92 | 2X4 + 1X4 sqmm FRLS Cu wire |
| 93 | 2X6 + 1X2.5 sqmm FRLS Cu wire |
| 94 | 4X10 + 2X4 sqmm FRLS Cu wire |
| 95 | Fan & indoor Fixtures |
| 96 | Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge. |
| 97 | Supplying, installation, testing and commissioning following type of light fixture with all other accessories, as required.(The colour temprature shall be between 3500 deg K as per application). |
| 98 | Retail Down type LED Light surface fitting (1200 Lumen/ 12W) similar to PHILIPS (CAT No:SM250C LED12S-6500 PSU WH) / Equivalent of Bajaj/ Wipro. |
| 99 | 10 watt LED Light surface fitting with batten/angel Holder similar to PHILIPS (CAT No:Base B22) / Equivalent of Bajaj/ Wipro. |
| 100 | Endura type 700 Lumen/10W LED Bulkhead wall fitting PHILIPS (CAT No:WT140W LED7S CW PSU S1 PC)/ Equivalent of Bajaj/ Wipro. |
| 101 | Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required. |
| 102 | Supplying, installation, testing and commissioning of ceiling fan (5 star rating) including wiring the down rod, earthing etc as required (Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells). 1200 mm sweep |
| 103 | Supplying, installation, testing and commissioning of wall mounted fan (5 star rating) including earthing etc as required (Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells). 400 mm sweep 1300 RPM |
| 104 | Supplying, installation, testing and commissioning of Heavy Duty Exhaust fan (5 star rating) including louvres, Ceiling Rose & Electric Connection as required. (Make -Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells) . 300mm sweep 900 RPM |
| 105 | FLOOR DISTRIBUTION PANEL(FDP) |
| 106 | One (1) Incomer - 100 Amp, 25 KA, FP MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB Digital Voltmeter and Ammeter with selector switch . Busbar - 200 Amp Al busbar suitable for operation at 415 Volt, 50 Hz, 3 Phase Supply. Eight(8) - Outgoing Feeders for (2 nos LDBs, 2 No PDBs & Two spares) each Comprising of One (1) -32A TPN 10KA MCB (C-Curve). |
| 107 | Supplying and fixing following rating MCBs/ Isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required |
| 108 | 32 Amps, FP 10 KA MCB (C-Curve) |
| 109 | 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) |
| 110 | INTERNAL P.H. & SANITARY WORK |
| 111 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer-in-charge. |
| 112 | Ground floor |
| 113 | 20 mm CPVC (sdr-13.5) pipes (Oriplast/Supreme) |
| 114 | 25 mm CPVC(sdr-13.5) pipes (Oriplast/Supreme) |
| 115 | 32 mm UPVC sdr-13.5 pipes (Oriplast/Supreme) |
| 116 | 40 mm UPVC sdr-13.5 pipes (Oriplast/Supreme) |
| 117 | 50 mm UPVC sch-80 pipes(Oriplast/Supreme) |
| 118 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of Engineer-in-charge. Ground Floor- 250 mm thick wall |
| 119 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer-in-charge. Ground Floor-250 mm thick wall |
| 120 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. Ground Floor |
| 121 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge. |
| 122 | Supplying all materials, labour, T&P and fixing standard sized two way Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Two way bib cock with Flange. |
| 123 | Supplying all materials, labour, T&P and fixing standard sized Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.15mm dia. nominal bore Long body Bib Cock SOR 2022 Sl no-84,Page-143. |
| 124 | Supplying all materials, labour, T&P and fixing standard sized Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.15mm dia. nominal bore Short body Bib Cock. |
| 125 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia angular Stop cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP angle stop cock with wall flange. |
| 126 | Supplying all materials, labour, T&P and fixing standard sized pillar cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 15mm dia brass pillar cock. |
| 127 | Fixing of 40mm dia Brass / Gun meta ball Valve confirming to IS : 781-1995 of of approved make as per specification complete as per direction of Er-in-charge.40mm dia brass or gun metal full way valve. |
| 128 | 32mm dia Brass or Gun Metal Full Way Valve |
| 129 | 40mm dia Brass or Gun Metal Full Way Valve |
| 130 | 50mm dia Brass or Gun Metal Full Way Valve |
| 131 | 15mm dia PVC connection pipe 450 mm long |
| 132 | 15mm dia CP Extention Nipple |
| 133 | Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per specification and direction of the Engineer in charge. |
| 134 | Supplying all materials, labour, T&P and fixing Health Faucet of Hindware/ Jaquar/ Parryware complete with Chromium plated brass brackets fixed to wooden plugs with Chromium plated brass screws as per specification and direction of the Engineer-In-Charge. 15mm dia CP Health Faucet of Jaquar 1.2mtr long, 8MM dia. |
| 135 | Supplying all materials, labour, T&P and fitting and fixing PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge. in Building |
| 136 | 110mm diameter PVC SWR pipes(Oriplast type-B/Supreme) |
| 137 | 110mm PVC door Tee |
| 138 | 110mm PVC offset |
| 139 | 110mm PVC door bend |
| 140 | 110mm PVC plain shoe bend |
| 141 | 110mm PVC vent cowl |
| 142 | 110mm P-trap |
| 143 | 110mm PVC plain bend |
| 144 | 100mm S/S coupling with EPMD |
| 145 | Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer-In-Charge. 250mm to 375mm thick wall |
| 146 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern of Hindware/Jaquar/ Parryware with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer-in-charge. |
| 147 | 10 Liters capacity PVC cistern with 32mm dia flush bend. , Size 47.6 X 15.5 X 32.5 cm |
| 148 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) of Hindware/Jaquar/Parryware duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer-In-Charge. Orissa Pan . Size- 53x41 cm |
| 149 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C. pan) of Hindware/Jaquar/Parryware with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer-In-Charge. EWC with 'p' / S trap plain Starwhite type, size-370x650x765 mm |
| 150 | Supplying all materials, labour T&P and fixing wash basins of Hindware/Jaquar/Parryware with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer-In-Charge. |
| 151 | PARRY WARE Wash Basin |
| 152 | Supplying all materials, labour, T&P and fixing Flat back large pattern urinal of Hindware/Jaquar/Parryware the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls land making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. |
| 153 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer-in-charge. 600mmx600mm size B.E.mirror (Alpina/Golden fish/Belgion) |
| 154 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail 24\\" of Hindware/Jaquar/Parryware complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-In-Charge. 25mmx600mm long CP towel rail. |
| 155 | Supplying all materials, labour, T&P and fixing standard sized Chromium Plated brass towel ring complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge |
| 156 | Supplying all materials, labour, T&P and fixing standard sized Chromium Plated soap case of Hindware/Jaquar/Parryware complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge. CP soap holder |
| 157 | Supplying all materials, labour, T&P and fixing standard sized Robe Hook of Hindware/Jaquar/Parryware complete with all as per specification and direction of the Engineer in charge. Jaquar Robe hook AGA-BIV-31791 |
| 158 | Supplying all materials, labour, T&P and fixing standard sized Soap Dispensor of Hindware/Jaquar/Parryware complete with all as per specification and direction of the Engineer in charge. Soap dispense with Glass Bottle. CAN-1135N. |
| 159 | Construction of 50 users Septic tank (internal size 5.00 x 1.60 x 3.00) |
| 160 | Construction of 1.20mtr internal dia x 2.60 mtr depth Soak way pit |
| 161 | 2000 LTR 3 - Layer White Rotational Moulded Cylinderical Vertical water storage tanks (ISI marked) |
| 162 | Construction of Brick masonry IC of internal Size- 0.75x0.75x0.45m(Each) |
| 163 | Construction of Brick masonry MH chamber of size- 1200mmx900mmx900mm deep-type-B |
| 164 | Sinking of 2 Nos. of (200 MM x 150 MM) size Bore Well at Kuchinda with Pumpping arranngemnt. |
| 165 | laying of160mm dia rigid UPVC pipe Class-3 (0.60 mpa) |
| 166 | Matrix Set -1(WB65X35 with one pair mounting brackets,EWC & Cistern Complete with fittings & seat cover ,one no hinged rail 76cm and five nos of grab rails 60cm) Please Enable Macros to View BoQ information |
