|
| 1 | Schedule 'A' |
| 2 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, such as sunken floor, roof padding etc complete all as specified and directed. |
| 3 | M&L for PCC 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregate) in padding concrete to over slab 40 mm thick (average) bedding layer mixed with WPC, finishing even and smooth without using extra cement complete all as specified and as directed. (Note : WPC & APP shall be measured and paid separately) |
| 4 | M&L for applying roof treatment on top of accessible roof with APP modified membrane (minimum 3 mm thick) weight not less than 3.00 Kg/sqm and reinforced with non-woven polyster reinforcement/mat (centre core) with thermal insulation with plain polythene finish on upper side of membrane, laid by torch application method with overlaps 150 mm on length side and 100 mm on the width side as per manufacturer’s instructions over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 300 gm/sqm complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Supply only integral water proofing compound |
| 6 | M&L for Anti-skid Endura Cool roof SRI (Solar reflective Index) ceramic tiles (of approved color), 300x300x10mm thick, square / rectangular laid over plastered surface of roof in 15mm thick screed bed in CM 1:4, joints grouted with tile grout complete all as specified and as directed. |
| 7 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | M&L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete as specified and directed. |
| 9 | M&L for coloured glazed ceramic tiles of size350x250x7mm/450 x 350 x 7mm thick on vertical surface such as skirting/dado, set and jointed in net cement slurry and pointed in colour cement to match ver 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 10 | M&L for vitrified ceramic tiles light shade 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but including 600 x 600mm size in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6complete all as specified and directed. |
| 11 | M&L for vitrified ceramic tiles light shade 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm but including 600 x 600mm size as in dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 12 | Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar complete all as specified. |
| 13 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 14 | Demolition of cement concrete(unreinforced)in ground floors and pavings n exc 15cm thickness(below or above ground level) complete all as specified and directed. |
| 15 | M&L for 75mm thick cement concrete 1:3:6 type C2, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed. |
| 16 | Taking down chowkats or frame of steel window/ ventilator n exc 1.5 Sqm each (without taking off shutters from the frames) and removing to or from the store complete as specified and directed. |
| 17 | Taking down chowkats or frame of any descrip tion exc 1.5 Sqm each and n.exc 4 Sqm (without taking off shutters from the frames) and removing to or from the store complete as specified and directed. |
| 18 | M&L for anodised aluminium frame/shutters for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 19 | S&F 4mm thick Sheet glass, ordinary quality with and including neoprene beadings in square nexc 0.5 sq.m in each pane |
| 20 | S&F 3mm thick Figured glass, pin head type and glazing in squares n exc 0.5 sq.m in each pane |
| 21 | S&F, Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed. |
| 22 | Taking down aluminium decogrill of any size and any type all as specified |
| 23 | S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104 5.5mm to 6.5mm thick with necessary channels and clips complete all as specified and as directed |
| 24 | S&F 12mm toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes writing words required complete all as specified and directed. |
| 25 | Taking down chowkats or frame of any descrip tion n.exc 1.5 Sqm (without taking off shutters from the frames) incl removing to or from the store complete all as specified and directed. |
| 26 | S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications and drawings complete all as specified and directed. |
| 27 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed by Eng-in-Charge. |
| 28 | S&F 150mm size, aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 29 | S&F aluminium, anodised barrel tower bolt of extruded section and fixed 200 mm of size |
| 30 | S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed. |
| 31 | S&F, in repairs, 20mm dia,stainless steel, fancy type, tubular curtain rod fix on decorative brackets with decorative globe at both ends complete all as specified and directed. |
| 32 | Taking down cement or cement lime plaster, any description on stone walls etc incl raking out joints hacking for key, scrubbing down with water, etc. |
| 33 | M&L for rendering 10mm thick cement plaster 1:6 on stone masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement. |
| 34 | M&L for rendering 5mm thick in (1:3) cm on fair faces of ceiling, chajjas, fins facia etc finished even and smooth without using extra cement complete all as specified |
| 35 | M&L for rendering 15mm thick cement plaster 1:4 on stone masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement. |
| 36 | M&L for preparing new plastered or un-plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed. |
| 37 | M&L for preparing old plastered or un-plastered surfaces and applying one coat of white wash on ceilings complete all as specified and directed. |
| 38 | M&L for preparing of new plastered or un-plastered surfaces and applying two coats of oil bound distemper over a coat of primer over and including wall care putty complete all as specified and directed. |
| 39 | M&L for complete removal of existing treatment and preparation of old plastered or un-plastered surfaces and applying two coats of oil bound distemper over a coat of primer over and including wall care putty complete all as specified and directed. |
| 40 | M&L for preparation of new plastered surfaces of wall and applying two coats of antifungal exterior emulsion paint over a coat of resin primer (100% acrylic) in camouflage pattern as per approved design including erecting of scaffoldings complete all as specified and directed by Engineer-in-Charge. |
| 41 | M&L complete removal of existing treatment of wall and preparation of old plastered or Un plastered surfaces of wall and applying two coats of antifungal exterior emulsion paint over a coat of resin primer (100% acrylic) in camouflage pattern as per approved design including erecting of scaffoldings complete all as specified and directed by Engineer-in-Charge. |
| 42 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 43 | S & F hollow PVC wall lining/paneling consisting of 5-7mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame with 5 mm PVC fillet of width 35 mm for wall panelling for fixing to wall to make PVC frame as per specified and directed. |
| 44 | S&F, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) |
| 45 | S&F in repairs rotational moulded polyethylene water storage tanks of capacity 1000 Litres (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-I including disconnecting and removal of old U/S PVC tank complete all as specified and directed. |
| 46 | S&F in repairs rotational moulded polyethylene water storage tanks of capacity 500 Litres (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-I including disconnecting and removal of old U/S PVC tank complete all as specified and directed. |
| 47 | Dismantling of cast iron , SGSW, PVC or reinforced concrete drain pipes100mm internal dia jointed in neat cement mortar and taking out of trenches if required. |
| 48 | S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls |
| 49 | S&F PVC (SWR) bends of any radius with oval and access door of 110mm dia |
| 50 | S&F PVC (SWR) vent cowl of 110mm dia |
| 51 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixing in pipe in position complete in all as specified and directed. |
| 52 | S&F PVC (SWR) Floor/ Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 53 | S & F in repairs white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet, PVC flexible pipe, 600mm size for 15 mm bore pipe with brass nut and washers etc complete all as specified and directed. |
| 54 | S&F in repairs, Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc including seat cover etc. complete all as specified and directed. |
| 55 | S&F, in repairs, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed. |
| 56 | S&F, in repairs, 15mm brass chromium plated fancy type bib cock with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 57 | S&F, in repairs, 15mm stop valves, fancy type brass chromium plated for iron pipe or for unions and fixed to 15mm bore pipe, complete all as specified and directed. |
| 58 | Supply only 15mm pillar taps, brass chromium plated fancy type with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe or for union and fixed to 15mm bore pipe, complete all as specified and directed. |
| 59 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 60 | S&F, in repairs, 600X450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 61 | S&F, in repairs, brass chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange complete all as specified and directed. |
| 62 | Taking down carefully aluminum/copper point wiring (light, fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulaters, socket etc and making good disturbed surface of wall/floor etc complete all as specified. Please Enable Macros to View BoQ information |
| 63 | Taking down carefully aluminum/copper point wiring (light, fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulaters, socket etc and making good disturbed surface of wall/floor etc complete all as specified. Please Enable Macros to View BoQ information |
