Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling of brick tiles or terracing tiles single layer bedded in cement mortar on roof complete all as specified and directed. |
| 2 | Demolition of cement concrete in roof including plastering and leeping including cleaning surface of roof with wire brush / mechanical brush throughly to remove old dirt / loose particles to expose clean concrete slab clean with watering etc complete all as specified and directed. |
| 3 | M&L for PCC 1:2:4 type B-0 using 12.50mm graded stone agg with WPC as in padding to maintain proper slope as required al as specified (WPC shall be paid separatly.) |
| 4 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof kerb / benching in radius 10 cm with waterproofing compound as per manufacturer's instructions complete all as specified and directed. |
| 5 | M&L for cutting out cracks to V section in existing roof or terracing, cleaning out, wetting, grouting with cement and sand slurry in 1:3 complete all as specified and directed. |
| 6 | M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed. |
| 7 | \\"Supply and Application of 5 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete roof surface by thorough surface preparation with high pressure water jet min. 125 bars, opening the cracks, followed by one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and min. 50% solids, filling and sealing the cracks, then over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coat having +450% Elongation. The surface is then to be tested for water tightness with a ponding test for min. 2 days and then top-coated with 2 Coats of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 SQM/Ltr/2 Coats, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable. The product should be certified by NABL Approved Lab and application is to be done by company approved applicator only. The guarantee for treatment shall be given by the contracyor in writing for a period of 5 year and security deposit @ 2.5 % of total cost of treatment shall be given for 5 year from the date of completion of work. |
| 8 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 9 | S&F in repair Rotational moulded polyethylene water storage tanks 500 ltr in three layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises . |
| 11 | M & L for Glazed Coloured Ceramic tiles in vertical surface 450x300x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 12 | Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 13 | M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement. |
| 14 | M & L Double charged Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 15 | M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 16 | Taking down wooden chowkhat without taking of shutter from the frame exc 1.5 sqm but not exc 4 Sqm each. |
| 17 | S&F pressed steel frames section 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and directed. |
| 18 | S&F 35mm thick 2nd class HW glazed skeleton shutters open rebated and prepared to receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.24(a) fitted to chowkhats. |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) Chowkhat of size 45 x 85 mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge complete all as specified and directed. |
| 20 | S&F in Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified and directed. |
| 21 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 22 | S&F butt hinges medium weight cold rolled mild steel 100mm complete all as specified and directed |
| 23 | S&F Brass barrel tower bolts 150mm, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed |
| 24 | S&F 150mm long Brass handles, cast type, polished bright complete all as specified. |
| 25 | S&F in Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 26 | S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed and fixed 250mm long complete all as specified and directed. |
| 27 | Taking down wooden chowkhat without taking of shutter from the frame n.exc 1.50 Sqm each complete all as specified and directed |
| 28 | M&L for powder coated aluminium (sliding/ hanging type) windows/ventilator with frame size 60x40x1.5mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4 mm including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised shape beading, screws etc with 4 mm thick tinted/ plain glass in panels incl anodised aluminium grill with all fittings & fixture complete all as specified and directed .(Note:Make and colour approved by GE) |
| 29 | M&L powder coated aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 1.5 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2 mm and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 300mm 02 Nos, aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing , anodised aluminium shape beading, screws etc with paneling in two parts with prelaminated ACP Panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.(Note:Make and colour approved by GE) |
| 30 | S&F in repair 18 mm thick HDHMR (High density high moisture resistance) board of grade1 quality make:Green Ply, Action Tesa or other make as approved by GE of one side prelem and other side to suitable for high gloss finsih mica of appoved quality make:- Century or as approved by GE Fixed with screws, slovent cement/adhesive to make cupboard shutters, sides, top, bottom, shelves inside the cabinet shutter or drawer including piano hinges and magnetic catcher,knobs including necessary woodern frame work where ever required complete all as specified and directed. |
| 31 | S&F in repair Harrison rails, stainless steel curtain rod, fancy type with fixing brackets, stops, rollers two nos globe at end with necessary fixing arrangements etc complete al as specified and directed. |
| 32 | S&F in repair vitreous china ware wash hand basin 550mm x 400 mm size, white, flat back or angle including removing the existing one complete and refixing with new bracket and making good all connections complete all as specified and directed |
| 33 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or s trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floorcomplete all as specified as directed. |
| 34 | S&F in repair 15 mm bore PVC connection 600 mm long with brass nuts and washers on both ends all as in repairs specified and directed. |
| 35 | S&F in repair brass chromium plated shower rose 150mm size size fixed to pipe all as specified and directed. |
| 36 | S & F in repair for stainlees steel towel rail 600mm long complete all as specified and directed. |
| 37 | S&F in repair Soap dish, vitreous China white, aprroximate size 160x 160x90mm complete all as specified and as directed. |
| 38 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 39 | Supply and fix in repairs 15 mm bore bib tap long body brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed. |
| 40 | S&F in repairs 15mm bore pillar cock Swan neck CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. |
| 41 | S&F in repairs brass chromium plated two way angle cock, of 15 mm bore complete all as specified and directed. |
| 42 | S&F in repair angle valves 15 mm fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 43 | S&F in repair Gun-metal, globe 20 mm or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 44 | S&F in repair 600 x 450 mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less, firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed. Make:Prayag cart part no P-450 or equivalent. |
| 45 | S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed. |
| 46 | S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromum plated bracket guard and railing 60cm long all as specified. |
| 47 | S&F in repair Gun-metal, globe 15 mm or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 48 | S&F in repairs 15mm bore CP wall mixer 2 in 1(provision for over head shower)prayag cat part NoP6875 or equivalant fixed to GI pipe complete all as specified and as directed. |
| 49 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking down steel tubing and connections, including removal to store up to complete all as specified directed. |
| 50 | M&L for Birckwall Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed. |
| 51 | S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking down steel tubing and connections, including removal to store up to complete all as specified directed. |
| 52 | Taking down eaves gutters and rainwater PVC/CI pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 53 | S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified & directed . |
| 54 | S&F for 110mm bore PVC (SWR) bends provided with access door all as specified & directed . |
| 55 | S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified & directed . |
| 56 | S&F for 75mm bore PVC (SWR) bends provided with access door all as specified & directed . |
| 57 | S&F Cast iron floor trap 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified directed. |
| 58 | M&L Granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 20 mm screed bed in CM 1:6 complete all as specified and directed . |
| 59 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 20mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge |
| 60 | M & L for Machine cut kota stone slab 20-25mm thick in riser of steps in a single pieace, skirting, dado and pillar laid over cement screed in cm 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as directed and as specified by Engineer-in-charge. . |
| 61 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as directed and as specified by Engineer-in-charge. . |
| 62 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 63 | Taking down old cement plaster including ranking out joints, hacking for key, scrubbing down with water etc and rubbish off the premisses complete all as specified and directed. |
| 64 | M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed. |
| 65 | M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement complete all as specified as directed. |
| 66 | M&L Rendering 5mm thick in CM 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified as directed. |
| 67 | M & L preparation new plastered surfaces of any description , including cornices and applying three coats of white wash on ceiling complete all as specified and as directed. |
| 68 | M&L for preparation of new plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of primer and 1mm thick wall care putty complete all as specified as directed. |
| 69 | M&L for Finishing walls with textured Internal paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified as directed. |
| 70 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified as directed. |
| 71 | M&L for preparation of old distempered and painted surfaces of wall and applying two coats of Oil Bound Distemper on walls over a coat of 1mm thick wall care putty complete all as specified and as directed. |
| 72 | M & L for preparation of old surfaces of any description , including cornices and applying two coats of white wash on ceiling complete all as specified and as directed. |
| 73 | M&L for Complete removal of existing treatment of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfacescomplete all as specified and directed. |
| 74 | M&L preparation of old painted steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed . |
| 75 | M&L for Joist, channel, angle, or tee sections, Fe 410 -W (Gde E- 250) quality A fixed independently, with or without connecting plates, etc complete all as specified and directed. |
| 76 | M&L for hot rolled steel flat Framed work of water tanks mesh welded and similar work conforming Fe 410 -W (Gde E- 250) quality A omplete all as specified and directed. |
| 77 | S&F 4mm dia galvanised steel wire, 50x50mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as spcified and directed. |
| 78 | M&L preparation of New or previously untreated steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed . |
| 79 | M&L for preparation of New or previously untreated wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 80 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendereing, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required internal dia of pipe 150mm complete all as specified. |
| 81 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 82 | M&L for brick work with subclass 'B' brick straight or curved on plan 6m mean radious built in CM (1:4) etc as directed complete all as specified and as directed. |
| 83 | S&F Pressed steel frame size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.omplete all as specified and directed |
| 84 | M&L PCC (1:3:6) type C1 as holdfast block, door frame filing, coping, bedblock etc complete all as specified and directed |
| 85 | S&F in repairs PVC waste pipe 32mm dia, 60 cm long for WHB/Urinal with long screw shanks and fly nuts, flanges end bedded in red lead cement and other fixed complete all as specified and as directed. |
| 86 | S&F in repairs CP cockroach trap with Grating 125 x125 mm size complete all as specified and directed.Make Prayag Cat No FT-24 or Equivalent |
| 87 | S&F in repairs 15mm bore CP central hole basin mixture Tower long body for WHB fixed to GI pipe with braided hoses complete all as specified and as directed. Make:Prayag/cera/Jaquar |
| 88 | S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) Complete all as specified and directed. |
| 89 | S&F in Repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed |
| 90 | S&F in repair PVC coloured bath cabinet with shelf overall size 540x340mm decorative design with looking mirror all as specified.Make Prayag Cat No 667 or Equivalent |
| 91 | M&L 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified. |
| 92 | M&L for screed bed or beding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed. |
| 93 | M&L Chequered cement concrete tiles with grey cement & pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors all as specified and directed. |
| 94 | M&L for providing factory made18mm thick WPC(wood plastic Composite) modular kitchen cabinates with shelves and shutters and cooking platform Including SS Designer Thali/Plate Comb,SS Designer Cup and Saucer Basket, SS Perforated Curtlery Basket SS designer Basket SS Grain Basket Trolley with bracket, stainless steel handles , CP SS teliscopic channel 20\\" long fixed with screws and solvent cement/ adhesive to form cabinets sides,top,bottom and shelves complete as per specification and fabricated one side prelem and other side to suitable for high gloss finish mica of appoved quality including all necessary fittings,hinges,handles,screws,adhesives,and hardware included. .work to be carried out in accordance with approved specification and as directed by Engineer-in-charge Complete all as specified and directed |
| 95 | M&L 100mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in hard standing finished even and smooth without using extra cement complete all as specified and directed |
| 96 | M&L 50 mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in hard standing finished even and smooth without using extra cement complete all as specified and directed |
| 97 | Dismantling wall and ceiling board(fibre, pulp,insulation boards/slabs/blankets, any thickness, Including cover fillets complete all as specified and directed |
| 98 | S&F Anodised aluminium snap grid frame work of size 605 mmx 605 mm for false ceiling all as specified |
| 99 | S&F 4.0 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified |
| 100 | S& F in Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long for fixing celing grid frame work complete all as specified |
| 101 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing |
| 102 | S&F in 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed |
| 103 | Dismantling of Plain or corrugated steel/fibre sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 104 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 105 | Dismantling wrought iron or MS work of any description not otherwise provided for complete all as specified and directed. |
| 106 | S&F Rolled mild steel Roof trusses (framed), trussed, purlins, post,crane gantries, rails and fastenings and heavy bracket framing grade of A Fe-290 (Gde E- 165) (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed. |
| 107 | M&L for repair and rendering 10mm thick in cm1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of visible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including scaffolding work for double/single storey bldgs complete all as specified and directed. |
| 108 | S&F mild steel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as directed. |
| 109 | Taking down old sink with draining board and fixing new stainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 940 mm X 460 mm and bowl size 406X354complete all as directed . Make- Nirali or equivalent. |
| 110 | S&F in repair ABS soap Dispenser Round 400ml Cat Part No prayag GBEA-493B or equivalent complete all as specified and directed |
| 111 | S&F in repair Steel plate rack of size 914x914x254mm made out of 0.65mm thick steel sheet complete all as specified and as directed. Make:Prayag cart part no P-450 or equivalent. |
| 112 | S&F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed |
| 113 | S&F in 15mm Toughned glass as in hinged doors, partitions automatic doors and similar work including printing with logo ,cutting to shape, drilling holes, locking system ,handle size 300mm other necessary fitting required complete all as specified and directed |
| 114 | Providing and fixing area not exceeding 2.00 sqm each factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 115 | S&F in 5.5mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 116 | S&F in repairs 15mm bore CP sink mixer with regular spout w/m long body for sink fixed to GI pipe with braided hoses complete all as specified and as directed. Make:Prayag cart part No P6855 or Equivalent. |
| 117 | Taking down carefully point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed. |
| 118 | M&L for one light/Fan/Exhaust fan point controlled by one switch point wiring with and incl 1.5 sqmm (nominal area) PVC insulated multi-stranded copper conductor FRLS in and incl PVC concealed conduit ISI marked 20/30 mm size or as required at site incl with its fittings and fixture such as tees, bends, elbows and juction boxes all moduler type surface mounting etc with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing and common earth terminal complete all as specified and directed.Note :- Modular PVC Surface mounting boxes and for mounting switch ,socket with modular frame plate and cover are paid seperately complete all as specified and directed |
| 119 | Ditto as above but for one 3 pin socket outlet 5 Amps on independent board…..ditto as above….. |
| 120 | Ditto as above but for One 3 pin socket outlet on same board.…..ditto as above….. |
| 121 | Ditto as above but for One bell point controlled by one 5 Amps bell push.…..ditto as above….. |
| 122 | M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper FRLS conductor 2.5 Sq. mm nominal area, single core, PVC insulated and unsheathed cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), , including PVC insulated multi-stranded copper conductor 2.5 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complee all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent complete all as specified and directed. NOTE: Sheet Metal enclosure with switch & sockets will be measured & paid separately ) |
| 123 | Supply and fixing modular type fan regulator electronic step type 240 Volts, 100 Watts two module ISI Marked with valid CML No. and connecting up complete all as specified and directed. |
| 124 | S&F modular switch flush single pole one way 6 Amps complete all as specified and directed. |
| 125 | Supply only in replacement modular bell push switch pole 1 way, 1 module, 6 Amp complete all as specified and directed. |
| 126 | Supply and fixing modular type socket outlet 2 module multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type 230V, AC, 50Hz ISI marked with valid CML No complete all as specified and directed. |
| 127 | Supply and fixing modular type socket outlet 2 module multipurpose having provision for 3 pin, 16 Amp and 3 pin, 6 Amp, piano flush type 230V, AC, 50Hz ISI marked with valid CML No complete all as specified and directed. |
| 128 | Supply and fixing square cover plate with frame suitable for fixing modular type switch/switch sockets/ fan regulator etc of 01module including inner & outer cover & suitable sunken boxes complete all as specified and directed. |
| 129 | Supply and fixing square cover plate with frame suitable for fixing modular type switch/switch sockets/ fan regulator etc of 03 module including inner & outer cover & suitable sunken boxes all complete all as specified and directed. |
| 130 | Supply and fixing square cover plate with frame suitable for fixing modular type switch/switch sockets/ fan regulator etc of 04 module including inner & outer cover & suitable sunken boxes all complete all as specified and directed. |
| 131 | Supply and fixing square cover plate with frame suitable for fixing modular type switch/switch sockets/ fan regulator etc of 06 module including inner & outer cover & suitable sunken boxes all as complete all as specified and directed. |
| 132 | Supply and fixing modular Ceiling rose 65mm dia suitable for 230V AC surface bakelite suitable for 2/3 batten fitting complete all as specified and directed. |
| 133 | S&F Call bell ding dong, AC single pole 240 volts complete all as specified and directed. |
| 134 | Supply & fix recess mounted LED light fitting 36 Watt Endura slim pro plus suitable for armstrong/grid ceiling complete with separate electrnic driver cat part NoBCTBLR 36W LED FP CW and equivalent all as specified and directed. |
| 135 | Supply & fix Wall mounted LED batten with polycorbonate housing and integreted electronic driver of capacity 20 Watt all as specified and directed. |
| 136 | Supply & fix Wall mounted LED batten with polycorbonate housing and integreted electronic driver of capacity 10Watt all as specified and directed. |
| 137 | Supply, fixing and testing noiseless ceiling fan of 1200mm sweep, ISI marked and five star rating, 230 Volts, single phase, 50 Hz 3 blades, double ball bearing, BE rating connection up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size 0.5 sqmm from ceiling rose to connector, including extra GI / MS pipe down rod, as per site requirement (approximate length 01 Mtr) complete all as specified and directed. |
| 138 | S&F in replacement of down rod with anti sucide safe fan down rod of 260mm length suitable for fixing in existing eceiling fan complete with nuts bolts, check nut and washer including making holes by driling for bolts, complete all as specified and directed. Make: Gold Life.Note:- (i) Anti sucide safe down rod will be active if load on fan exceeding 20.00 Kg. then down rod pipe opens from middle and spring in pipe will expended for landing smoothly of person trying to commit suicide. |
| 139 | Supply fixing and testing exhaust fan electric single phase AC 240 Volts 50 HZ supply heavy duty corrosion resistant of 300 mm sweep size, 1400RPM, aluminium pressure die cast motor powder coated paint finished, light weight heavy duty , double ball bearing ,with louvers and connecting including provision 3 core flexible PVC insulated multi stranded copper conductor of size 0.5 Sqmm from ceiling rose to connector incl four Nos of nuts,bolts and washers for fixing the frame and wiriting CA NO and MES No. with synthetic enamel paint as color, style and size decided by engineer in charge including dismantling of old water exhaust fan and depositing to MES store complete all as specified and directed. |
| 140 | S&F sub main wiring 4 sqmm with two runs of 4 sqmm single core multi stranded copper conductor and one run of 4 sqmm PVC insulated copper earth wire connected to earth in PVC conduint including all fitting fixed on wall/ceiling , complete all as specified and directed by Engineer-in-Charge. |
| 141 | S&F sub main wiring 6 Sqmm with two runs of 6 sqmm single core multi stranded copper conductor and one run of 6 sqmm PVC insulated copper earth wire connected to earth in PVC conduint including all fitting fixed on wall/ceiling , complete all as specified and directed by Engineer-in-Charge. |
| 142 | S&F in repair sheet metal single pole and neutral encloser with a two pin and earth plug and socket complete with one MCB SPN 20 amps, 240 V. |
| 143 | Supply and fixing in repair VTPN 4 way distribution box with position of MCCB as incommer and MCB SP as out going flush to the wall complete all as directed. |
| 144 | Supply and fixing in reapair MCCB, 3 Pole, 415 Volt, fixed thermal magnetic release type with breaking capacity 16 KA 63 Amps, complete. |
| 145 | S&F in repair MCB TP 240 Volts of capacity 40 Amps complete all as directed by Engineer-in-Charge. |
| 146 | Supply & Fixing in repair DB SPN 240 Volts 200 Amps rates bus bar having 8 way double door shutters. |
| 147 | Supply & Fixing in repair MCB DB SPN 240 Volts 200 Amps rates bus bar having 4 way double door shutters. |
| 148 | S&F in repair MCB SPN 240 Volts of capacity 40 Amps complete all as directed by Engineer-in-Charge. |
| 149 | S&F in repair MCB SPN 240 Volts of capacity 20 Amps complete all as directed by Engineer-in-Charge. |
| 150 | S&F in repair MCB SP 240 Volts of capacity 5 to 30 Amps complete all as directed by Engineer-in-Charge. |
| 151 | S&F in replacement brackets made out of 40/50mm dia medium grade GI pipe 1.50 mtr long bent to shape and size fixed on location using new 2 nos 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed. |
| 152 | S&F in repair testing energy saving, die cast aluminium housing IP 66 protection, 70 W LED flood light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. |
| 153 | S&F in repair post top lantern light fitting 20W LED made in die cast aluminium housing with decorative opal acrylic diffuser and IP65 protection, fixed properly at directed location complete all as specified and directed. |
| 154 | M&L inrepair for LED post top gate light IP65 elegantly designed die-cast aluminium housing and high grade aluminum heat sink for efficient thermal management, studiness and excellent corrosion resistance. 4 nos. die-cast aluminium arms are provided to support the housing. Powder coated black after shochromate treatment. watt, LED post top with IP65 protection, complete. |
| 155 | Supply and fix electric water heater,storage type steel body with glass lined SS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. 1 M of three core 2.5 sqmm twisted copper conductor cable PVC sheathed with three pin plug top and wiriting CA NO and MES No. with synthetic enamel paint as color, style and size decided by engineer in charge including dismantling of old water heater,storage and depositing to MES store complete all as specified and directed. |
| 156 | Supply and fix wall mounted type, high suction, multi speed, filter less, Autocleaning,1400 m3/hr suction, inverter technology, BLDC motor operation, low noise operation, 220V AC, 50HZ, electric chimney having LED indicators and touch sensors to be installed in Kitchens including all accessories as required on the site for removal of vent gases through the ventilators complete all as specified and directed. |
| 157 | Supply and Fix alluminium exhaust pipe, minmum 6 inch in diameter and upto 10 ft long for electric chimneys having a cowel at the exit of the pipe complete all Specified and directed. |
| 158 | M&L for cutting holes into or through brick walls built in walls, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete for installation of Exhaust of size exceeding 150 sqcm but not exceeding 400 sqcm complete all as specified and directed. Note - After installation the uneven surface has to be made good. |
| 159 | Suppy and fix Steel ventilators, fixed type, with glazing bars to close the exhaust outlet of the chimneys all as specified and directed. |
| 160 | M&L earthing complete with 60cmx 60cmx3mm thick GI plate electrode buried in ground vertically not less than 2.25mtrs deep below ground level with top edge of the plate not less than 1.5mtrs below ground level with GI wire of size 4mm dia as earthing lead including necessary excavation and earth work (in any of strata) providing charcoal dust, salt mixed in continuous layer 15 CM all around the plate and balance pit will be filled with vigitable soil approved by engineer in charge, PCC (1:3:6 ) type C1 in chember ,Precast 50 mm thick in cement ( 1: 2:4) type B.1 with CI frame with cover, 20mm dia bore light grade GI watering pipe furnel etc fixing of GI Pipe 15 mm bore protection for earthing wire from earth pit to test point complete & making connection all as directed by Engineer-in-Charge. |
| 161 | Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections including Bricks, GI Pipes, etc. of any descriptions, laid in Trenches and/or fixing with Walls/Poles including Segregating of Serviceable Materials viz Bricks, Cables, GI Pipes, etc. and keep in Safe custody for re-use/credit, complete all as specified and as directed. (NOTE : Earth Work shall be Measured and Paid for separately under relevant Items). |
| 162 | Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, erection of poles complete all as specified. |
| 163 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified. |
| 164 | Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point. |
| 165 | Supply and laying well burnt Sub Class 'B' locally available best quality laid in trenches perpendicular to UG cable above sand cushioning for cable protection complete all as specified. |
| 166 | Supply and spreading dry coarse sand in trenches for protection of underground electric cable,spread in uniform 23 cm thickness and punned down gently to 18 cm complete all as specified and as directed. |
| 167 | Supply & layng 40 mm bore GI tube light grade laid in trenches or fixed on wall, floor or on pole for cable protection complete all as specified and directed. |
| 168 | Supply, Laying,Jointing , testing and replace in repairs,16 Sqmm 4 Core XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade laid in trenches/floor or fixed on wall/pole including brass compression cable gland, terminal lug etc.. complete all as specified and directed. |
| 169 | Supply and fixing in repair of MCCB of 3 pole of capacity 100 amps with breaking capacity of 16 KA, in existing LT panel located at infront of MESS bldg. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
