|
| 1 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 2 | Excavation in earth work in foundation and trenches etcetera in all kind and classification of soil such as pick work, jumper work, pick jumper work, blasting work and hard blasting work and saturated soil any other mixed verity of soil in dry or saturated condition upto any depth and lift upto any height including chiseling/wedging out rocks where blasting prohibited dewatering pumping or bailing out water where required and/ removal of slush seprately as directed which may arise during the execution including stacking the serviceable and unserviceable material and then returning stacked soil in any thickness of layers when required into plinth side of foundation etcetera consolidating each deposited layers by ramming and watering then disposing of all surplus unserviceable excavated earth as specified dumping place as per the direction by Engineer in charge including entire carriage of materials sale tax with in all leads and lifts and other incidentialss. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 3 | Providing and laying in position cement concrete 1:4:8(one cement: four coarse sand: eight graded/crushed stone aggregate 40mm (forty miillmeter) nominal size mechanically mixed and curing complete excluding cost of centering and shuttering in foundation and plinth level as per CPWD specifications 2019 complete and direction of Engineer-in- charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi , royality , Malkhana , toll tax, goods service tax , labour cess or other taxes imposed by the Govt. |
| 4 | Providing and laying in position cement concrete 1:3:6 (one cement:three sand: six graded/crushed stone aggregate 40mm (fourty millimeter) nominal size mechanically mixed and curing complete excluding cost of centring and shuttering in foundation and plinth level as per CPWD specifications 2019 complete and direction of Engineer-in- charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials.The rate includes octroi , royality , Malkhana , toll tax, goods service tax , labour cess or other taxes imposed by the Govt. |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes in cement mortor 1:6 (one cement: six coarse sand) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax, good service tax or other taxes imposed by the Government. |
| 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortor 1:3 (one cement: Three coarse sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 7 | Providing and laying in position cement concrete 1:2:4(one cement: two coarse sand: four graded/crushed stone aggregate 20mm (twenty miillmeter) nominal size mechanically mixed and curing complete excluding cost of centering and shuttering in foundation and plinth level as per CPWD specifications 2019 complete and including entire carriage of materials with in all leads and lifts and other incidentials . The rates are including octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 8 | Providing steel reinforcement and Thermo-Mechanically Treated bars of grade Fe-500D or more approved make i.e. SAIL, RINL,Shyam Steel/TISCO, Jindal Panther (JSPL) for reinforced cement concrete work including bending cutting straightning and placing in position binding all complete upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 9 | Repairs to Plaster with cement mortar 1:4 ( one cement : four sand) of thickness 12mm (twelve milimeter) to 20mm (Twenty milimeter) in patch of area 2.5 sqm (two point five square meter) and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground, all complete as per CPWD specifications 2019 complete and direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 10 | Providing and applying white cement based putty of average thickness 1 mm (one millimeter), of approved brand and manufacturer J.K wall Putty/ Brila White Putty, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level/height as per CPWD specifications 2019 complete and direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 11 | Providing and fixing 35 mm (thirty five milimeter) thick Second class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 12 | Providing and fixing 35 mm (thirty five milimeter) thick Kiln seasoned selected class of sheesham wood wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (one point four milimeter) in both directions with wire of dia 0.63 mm (zero point sixty three milimeter), for doors, windows and clerestory windows with hinges and necessary screws as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 13 | Providing and fixing 30 mm (thirty milimeter) thick Kiln seasoned selected planks of sheesham wood glazed shutters for doors, windows and clerestory windows using 4 mm (four milimeter) thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 14 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications ICI, Nerolac, Berger, Asian Paint Shalimar make two or more coats applied on walls @ 1.25 ltr/10 sqm (one point twenty five liter per ten square meter) over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (zero point seventy five per ten square meter) upto all floor level as per the direction by the Engineer in charge in all floor leve/height including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 15 | Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety liter per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm (zero point seven five liter per ten square meter) of approved brand and manufacture ICI (Dulex Glass) , Nerolac, Berger (Luxol High Glass), Asian Paint (Premium ApcoliteGlass) Shalimar make in all height/ in all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 16 | Providing and fixing 300x16mm(three hundred into sixteen millimeter ) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 17 | Providing and fixing 150x10mm (one hundred fifty into ten millimeter ) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government |
| 18 | Providing and fixing 100x10mm (one hundred into ten millimeter ) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 19 | Providing and fixing 125mm (one hundred twenty five millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 20 | Providing and fixing 100mm (one hundred millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 21 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg (thirty five kilogram) and door width upto 700 mm), with necessary accessories and screws etc. complete as per CPWD specifications 2019 complete and direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 22 | Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded/crushed stone aggregate 20 mm (twenty millimeter) nominal size over 75mm (seventy five millimeter) thick bed of dry brick ballast 40 mm (forty millimeter) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing and finishing the top smooth upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 23 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends withWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design as per CPWD specifications 2019 complete and direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 24 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimeter) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make Kazaria, Nitco, Somany, Orient Sell, RNK, Johanson & Johanson in allcolours shade except burgundy,bottle green, black, in skirting risersof steps and dado over 12 mm (twevle milimeter) thick cement mortar 1:3 (one Cement : three Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 25 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimeter) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (at the rate of three point three kilogram per square meter) including pointing in white cement mixed with pigment of matching shade complete as specified upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 26 | Providing and laying 600mm x 600mm (six hundred millimeter into six hundred millimeter) vitrified floor tiles double charged in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of approved make Kazaria, Nitco, Somany, Orient Sell, RNK, Johanson & Johanson, in all colours and shades, laid on 20mm (twenty millimeter) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square meter) including grouting the joints with white cement and matching pigments etc., complete upto any floor level/height as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax, good service tax or other taxes imposed by the Government. |
| 27 | Providing and laying Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (twenty millimeter) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 28 | Renewing glass panes, with wooden fillets wherever necessary, Float glass panes of nominal thickness 4 mm (four milimeter) (weight not less than 10kg/sqm (ten kilograme per square meter) as per CPWD specifications 2019 complete and direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 29 | Providing and fixing 110mm (one hundred ten milimeter) dia of D-plast or vectus/finolex make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion,-Single socketed pipes as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax, good service tax or other taxes imposed by the Government. |
| 30 | Providing and fixing 110mm ( one hundred ten millimeter) plain bend of D-plast or vectus /finolex make on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax, good service tax or other taxes imposed by the Government. |
| 31 | Providing and fixing white Vitreous chinapedestal type water closet European type W.C. pan with ISI marked white solid plastic seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 32 | Providing and fixing wash basin with C.I. Bracket, 15 mm (fifteen milimeter) PTMT pillar cock, 32 mm (thirty two milimeter) PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm (five hundred fifty into four hundred milimeter) with single 15 mm (fifteen milimeter) PTMT pillar cock as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 33 | Providing and fixing 510x1040 mm (five hundred ten into onethousand fourty millimeter bowl depth 250 (two hundred fifty) Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm(forty millimeter), including painting of fittings and brackets, cutting and making good the walls wherever required approved quality of preferred make as per standard bidding document as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 34 | Providing and fixing 32mm (thirty two milimeter) dia flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fitting complete as per CPWD specifications 2019 complete and direction of Engineer in chargeincluding entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government |
| 35 | Providing and fixing 600x450 mm (six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass of Atul Modi Guard, Goden Fish make with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 36 | Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five milimeter) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (fourty milimeter) long screws, rawl plugs etc., complete as per CPWD specifications 2019 complete and direction of Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 37 | Providing and fixing C..P. brass toilet paper holder as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 38 | Providing and fixing 100 mm (hundred milimeter) dia soil, waste and vent pipes, sand cast iron S&S pipe as per IS: 1729 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 39 | Providing and fixing 15 mm (fifteen millimeter) dia nominal bore G.I. Pipes complete of preferred make of Jindal/Tata, BST, Parkash Surya as per standard bidding document with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 40 | Providing and fixing 20 mm (twenty millimeter) dia nominal bore G.I. Pipes complete of preferred make of Jindal/Tata as per standard bidding document with G.I. fittings and clamps in internal work exposed on wall, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 41 | Providing and fixing 15mm (fifteen millimeter) nominal bore ball valve (brass) Zoloto, Sant, L&K, Leader make as per standard bidding document, High or low pressure, with plastic floats complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 42 | Providing and fixing 15mm (fifteen millimeter) nominal bore uplasticised PVC connection pipe approved quality of preferred make as per standard bidding document with brass unions 30Cm (thirty centimeter) Length as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 43 | Providing and fixing 20mm (Twenty millimeter) nominal bore uplasticised PVC connection pipe approved quality of preferred make as per standard bidding document with brass unions 30Cm (thirty centimeter) Length as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 44 | Providing and fixing 15mm (fifteen millimeter) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) as per CPWD specifications 2019 complete and including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 45 | Providing and fixing 20mm (twenty millimeter) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) as per CPWD specifications 2019 complete and including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 46 | Providing and fixing 15mm (fifteen millimeter ) nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms (eight hundred ten grams) as per CPWD specifications 2019 complete and direction of Engineer in chargeincluding entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 47 | Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass stop cock (concealed) of standard design and approved make of Kingston, Gem, Parko , Techno, Jal , ESS ESS, Jaquar, Seiko conforming to IS:8931 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 48 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm {(fifteen millimeter into fifty millimeter)} of approved quality Kingston, Gem, Parko, Techno,Jal, ESS ESS , Jaquar , Seiko make as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 49 | Providing and fixing 100 mm (one hundred millimeter) nominal dia circular type PTMT grating of approved quality of preferred make as per standard bidding document and colour as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 50 | Providing and fixing PTMT angle stop cock 15 mm (fifteen milimeter) nominal bore, weighing not less than 85 gms of standard design and approved make of Kingston, Gem, Parko , Techno, Jal , ESS ESS, Jaquar, Seiko conforming to IS:8931 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 51 | Providing and fixing 75 mm (seventy five millimeter) dia high pressure PVC spigot and socket waste and ventilating pipes D-plast/Finolex as per standard bidding document including fixing with approve adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 52 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make tripple layer 1000 or 2000 liter capacity including all fittings as per CPWD specifications 2019 complete and direction of Engineer in chargeincluding entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 53 | Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height in all floor level of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per CPWD specifications 2019 in foundations, footings, bases of columns, etc. for mass concrete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 54 | Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height in all floor level of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per CPWD specifications 2019 in Columns, Pillars, Piers, Abutments, Posts and Struts as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 55 | Providing and laying in position cement concrete work M-25 (M-twenty five) design mix with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre including curing complete excluding cost of form work in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to all floor level, excluding the cost of centering, shuttering and finishing upto all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 56 | 15mm (fifteen millimeter) Cement plaster on the rough side of single or half brick wall of mix cement mortor 1:6 (one cement: six coarse sand) in any floor/any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 57 | Steel work welded in built up sections,trusses and framed work approved make i.e.TATA/JINDAL San HARVIC Steelman Industries P.D. Industries metal windows, Chandni Industires Ganpati Udyog (Rajpura) ,including cutting ,hoisting ,fixing in position and applying a priming coat of approved steel primer using structure steel etcetera as required lead paint in gratings framed guard bars, ladders, railling, brackets and similar works complete upto all heights/all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 58 | Finishing walls with water proofing cement paint of required shade, new work (Two or more coats applied @ 3.84 kg/10 sqm) as per CPWD specifications 2019 complete and direction by the Engineer in charge including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 59 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (zero point ninety liter per ten square meter) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eighty liter per ten square meter) of approved brand and manufacture upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
