|
| 1 | Labour charge for making Tee connection with Existing line excavation, cutting jointing and making connection with existing line complete in all respect |
| 2 | Supply and fixing of PVC TEE 150x150x150mm dia. |
| 3 | Chain Swing (2seater): 10’L x 6’W x 8’.5 H. Horizontal frame and vertical legs is of M.S. pipe 2’’ x 12 gauge. It stays with M.S. pipe 1’’ x 12 gauge. Swinging seats-2nos is of FRP molded seat of 2mm thick fitted with M.S. pipe ½’’ frame x 12 gauge which hang with M.S. chain 6mm thick duly plated with ball bearing and M.S. flat 6mm thick housing. Complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) in multi colors item with GST, Transportation, Installation with C.C and amp: labor at site. |
| 4 | Sea Saw (4seater): - 8’L x 5’.5W x 15’ high. Frame is of M.S. pipe 2’ x 12 gauge. Sitting planks is of M.S. pipe 2’’ x 12 gauge and its cantilever and handles is of M.S. pipe ¾’ x 12 gauge. Sitting seats 4 nos. is of molded FRP material in 3mm thick with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division). Complete item with GST, transportation, installation with C.C and labor at site. |
| 5 | Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of M.S. pipe 2”, ¾” andamp: vertical ladder is of same material of 12-gauge ISI mark with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division). Complete item with GST, Transportation, Installation with C.C and amp: labor at site. |
| 6 | Merry-go-round (4-seater): 5’ Dia. Main frame is of M.S. sq. pipe 2’’ x 2’’ x 14 G and having suitable handle andamp: foot-rest is of round pipe ¾’’ x 12 gauge. Central pipe is of M.S. pipe 3’’’x 12 G with heavy duty shaft 50mm thick andamp: ball bearing assembly. It consists of 4no chair made of molded FRP Plastic. Complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) in multi colors item with GST, Transportation, Installation with C.C and amp: labor at site. |
| 7 | PVC Reducer 150mm x 100mm.. |
| 8 | FRP dustbin (tilting type) of capacity 60 Ltr. Body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. It fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with Epoxy Primer INTERSEAL 670 HS and PU finish (Interthane 990) paints. Complete item with GST. Transportation, Installation with CC and labor at site. |
| 9 | Making Connection with existing sewer Main line |
| 10 | P/F of PVC 100mm dia bend. |
| 11 | Supply of PVC pipe 150 mm dia with ISI mark 8kg.cm2 pressure |
| 12 | supply of good earth complete as per site requirement |
| 13 | P/F Chest press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI-pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from roto-moulde. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. |
| 14 | P/F Seated puller is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm and 25mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used |
| 15 | P/F Sky Walker is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The Handle frame is made of 25mm NB “B” Class GI-pipe. Foot Rod is made from 50x50 MS square pipe of 3mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. |
| 16 | P/F Air Walker is made from IS-1239 “B” Class GI-pipe. The bend pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 25mm NB “C” Class GI-pipe. The Leg frame is made of 32mm NB “B” Class GI-pipe. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, |
| 17 | P/F Horse rider is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and connecting rods is made of 25mm NB “C” Class GIpipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick. |
| 18 | P/F Leg press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick |
| 19 | P/F Push-up-Bar is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mmthick. |
| 20 | P/F Sit-up-Board is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. Bench frame is made from 25mm NB “B” Class GI-pipe and MS Perforated Sheet of 2mm thick is welded in bench frame. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mmDia and 10mm thick |
| 21 | P/F Back Extension is made from IS-1239 “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe. The remaining frame is made of 25mm NB “B” Class GI-pipe. Barbell is made from 25mm “B” Class GI-pipe. Weight plates are made from 200mm dia solid MS plate. Closing caps are made from top quality LLDPE Material which is of 2mm thick. Machine is directly grouted in the ground.The nut Bolts used for assembly are made from SS material. |
| 22 | P/F Weight lifter is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe. The remaining frame is made of 25mm NB “B” Class GI-pipe. Barbell is made from 25mm “B” Class GI-pipe. Weight plates are made from 200mm dia solid MS plate. Closing caps are made from top quality LLDPE Material which is of 2mm thick. Machine is directly grouted in the ground. The foundation pipes are embedded in CC stock and painting is done by attractive color spraying after proper surface treatment, the initial coat of primer surface is applied before top coat. The powder coating is done from Polyurethane and Epoxy Powder with 60 to 70 Micron Thickness. |
| 23 | P/F Triple Horizontal Bars are made from “B” Class GI-Pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick/or holepass made in 25x25x3 angle welded on all 4 sides of the pipe bottom. The Handle frame and connecting rods is made of 25mm NB “B” Class GI-pipe. Seat frame is made from 50mm NB “B” Class GI-Pipe. -_ |
| 24 | P/F Rower is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The Handle frame and connecting rods is made of 25mm NB “B” Class GIpipe. Seat frame is made from 50mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mm thick. |
| 25 | P/F Cross Trainer is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The handle frame is made 25mm NB “B” Class GI-pipe. Foot rod is of 40mm NB “B” Class GI-pipe. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mm thick. |
| 26 | Supply and fixing of LED lights 18W of reputed make |
| 27 | Supply and application of premium FRP multicolour coating on cast iron benches, with special artistic designs/finishing, ensuring a vibrant, weather-resistant and durable finish. The work shall incorporate the wording ‘Municipal Corporation Faridabad’ as branding along with serial numbering and Tender ID . This treatment enhances durability, prevents corrosion, and provides an elegant aesthetic appeal to enrich public parks and community spaces. The rates are including labour etc. for all the coating work at site and GST will be applicable extra. All artistic designs as per the instructions of the Engineer-in-Charge. |
| 28 | Supply of the Cement Solvent. |
| 29 | P/F of pvc pipe 100mm dia |
| 30 | P/F of PVC 150mm dia bend /couplar |
| 31 | Beautification Works in including Play Equipment, Open Gym, Plantation and Repairing of boundary wall at Brahampuri Park Saran Village Boosting Park in ward no. 09 NIT Faridabad. Please Enable Macros to View BoQ information |
