|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and as directed. |
| 2 | Taking down Shutters of any description exc 1 sqm but n. exc 2 sq. m each of any description complete all as specified and directed. |
| 3 | Taking down Chowkhats or frame of any description n. exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specfied and directed. |
| 4 | Taking down Chowkhats or frame of any description exc. 1.5 Sqm but not exc. 4.0 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specfied and directed. |
| 5 | M&L for Virified Ceramic tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 6 | All as per Srl item No. 5.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 7 | M&L for Virified Ceramic tiles 8-10mm thick dark shade double charged (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n. exc. 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | All as per Srl item No. 7.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 9 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 10 | All as per Srl item No. 9.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 11 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7 to 8mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 12 | M&L for 600 x 600 x 15-16mm thick heavy duty Ceramic floor Parking tile laid in floor etc. with 2-3mm thick spacer, joint of spacer is filled with epoxy or as directed, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 13 | M&L for 300 x 300 x 10mm thick heavy duty Ceramic floor tile laid in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 14 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and directed. |
| 15 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 16 | All as per Srl item No. 15.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 17 | M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 18 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site for pipe complete all as specified and directed. |
| 19 | Supply, laying and testing for 15mm bore GI tubing medium grade galvanized steel tubing with all fitting such as union, sockets, reducing bends elbows Tee, Checknuts, Caps, Plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specifed and directed. |
| 20 | Refixing old 15mm GI tubing and connection in new or old position (wall, floor, etc). complete all as specifed and directed. |
| 21 | M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth complete all as specified and directed. |
| 22 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal from site for pipe complete all as specified and directed. |
| 23 | Supply, laying and testing for 20mm bore GI tubing medium grade galvanized steel tubing with all fitting such as union, sockets, reducing bends elbows Tee, Checknuts, Caps, Plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specifed and directed. |
| 24 | Refixing old 20mm GI tubing and connection in new or old position (wall, floor, etc). complete all as specifed and directed. |
| 25 | S&F in rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position specified in SSR Part-I, including dismantling old unsv PVC tank complete all as specified and directed. |
| 26 | S&F in rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position specified in SSR Part-I, including dismantling old unsv PVC tank complete all as specified and directed. |
| 27 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and directed. |
| 28 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed. |
| 29 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 and finished even and even smooth without using extra cement complete all as specified and directed. |
| 30 | M&L for preparation of new surface of plastered of wall and applying two coats of distemper oil emulsion incl priming the surfaces and incl one coat of wall putty complete all as specified and directed. |
| 31 | M&L for Rendering 10mm thick on fair faces of concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement complete all as specified and directed. |
| 32 | M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling complete all as specified and directed. |
| 33 | M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound finished even and smooth without using extra cement complete all as specified and directed. |
| 34 | M&L for preparation of newly plastered surface on exterior wall and applying two coats of cement paint over one coat of priming the surfaces complete all as specified and directed. |
| 35 | M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper including necessary putty (any tint) on walls complete all as specified and directed. |
| 36 | M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 37 | M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed. |
| 38 | M&L for applying one coat of synthetic enamel paint on old steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed. |
| 39 | M&L for preparation of old surfaces of plastered of walls and applying two coat of distemper oil emulsion incl priming the surface and incl 1mm thick wall care putty complete all as specified and directed. |
| 40 | M&L for Preparation of old painted plastered surfaces and applying one coat of cement base paint on walls complete all as specified and directed. |
| 41 | M&L for Preparation of old painted plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed. |
| 42 | Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 60mm x 6mm grid (Frame work) etc. including dismantling old unsv wall and ceiling boards of any type complete all as specified and directed. |
| 43 | S&F mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framework and similar work complete all as specified and directed. |
| 44 | Dismantling Plain or Corrugated steel sheeting ang gauge, thickness, including Nainital or similar pattern Roof covering complete all as specifed and directed. |
| 45 | Dismantling wrought iron or mild steel work of any description etc complete all as specified and directed. |
| 46 | Dismantling old timber scantling over 40 Sqm complete all as specified and directed. |
| 47 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 48 | S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or flat sections) including distance pieces, cleats etc. complete all as specifed and directed. |
| 49 | S&F Powder coated anodised Aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fitted with frosted louvers and outer side fitted with mosquito proof galvanised wireness including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finishes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories etc complete all as specified and directed. |
| 50 | S&F of Powder coated aluminum three track sliding window shutters consisting two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces with brick work and plaster as required at site:-(i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick.(ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm.(iii) Aluminium glazing strip of size 18.2 x 16.66mm.(iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters.(v) IDPE rubber gasket for fixing glass.(vi) Locking cleat concealed per shutter - 01 No.(vii) Two nos sliding rollers per shutter.(viii) Rubber shock absorber - 03 No per shutter.(ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter.(x) Fixing screws for frame with wall - 06 No per window. |
| 51 | S&F glazed (5.0mm thick plain/ coloured glass) aluminium door powder coated consisting of frame of 63 x 38mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor door shutter consists of top rail size is 83 x 44mm, bottom rail & lock rail size 110 x 44mm & style of door shutter is 83 x 44mm with handles 2 Nos in each door, hinges has fitted on frame as required fixed with rubber gasket & aluminium beading any no of panels with aliminium handle, locking arrangement, floor spring and floor door stopper incl. necessary joining cleats, glazing clips etc. complete all as specified and as directed. (AI section thickness 2mm) confirming to ISI. Make: Jindal Aluminium, Man Industries or equivalent as approved by GE. |
| 52 | S&F in repair 25mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/windows curtain with fancy type powder coated SS dooms with SS Brackets fitted to each other and fixed to wall incl. remocal of existing rod and making good etc. complete all as specified and directed. |
| 53 | M&L for complete removal of existing surface and preparation of old surfaces of plastered of walls and applying two coat of distemper oil emulsion incl priming the surface and incl two coat of wall putty complete all as specified and directed. |
| 54 | M&L for water proofing Roof treatment to RCC Roof with approved modified membrane of weighing not less than 3kg/sqm. The height of the roof may upto 9m comprising with following including taking down old water proofing treatment items complete all as specified and directed. (i) The surface of roof, parapet, and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foeign matter such as fungus, mass dust etc by wife brushing and dusting. (ii) Oil based Bitumen primer confirming to IS-3384-1986 @ 0.3 Kg per sqm to be applied on prepared surface till the surface is properly impregnated. (iii) Applying one coat of hot blown bitumen of 85/25 grade @1.20 Kg/Sqm. (iv) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3mm thick composed of woven polyster center core, which is sandwitched between high quality polymeric bitumen mix having softening, high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps as per manufacture instruction etc. (v) Applying one coat of hot blown bitumen of 85/25 grade @1.20 Kg/Sqm. |
| 55 | M&L for applying aluminium paint in two coat @ 100gm/sqm in each coat on finished membrane surfaces, complete all as specified and directed. |
| 56 | M&L for complete removal of existing treatment from wall by scrapping of (exterior) surfaces of old decorated walls etc. and applying Birla/ J.K. wall care white putty 2mm thick for levelling the surfaces including properly making of \\"V\\" shape crakes and filling of all crakes with crakes seal of walls & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. |
| 57 | M&L for complete removal of existing treatment from wall by scrapping and washing and applying Birla/ J.K. wall care white putty 2mm thick for levelling the surfaces including properly making of \\"V\\" shape crakes and filling of all crakes with crakes seal of walls & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. |
| 58 | S & F 35mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, moulded on solid (for each side): supplied and fitted to chowkhat complete all as specified and directed. |
| 59 | S&F 35mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 60 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and directed. |
| 61 | Solid PVC door frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of plain colour PVC Sheet and edges will be painted to match with reinforced with MS Square tube suppling and fixing in opening as per specification and drawing with prelam sheet on SI Page No. 178 of SSR Part-II complete all as specified and directed. |
| 62 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 63 | S&F100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 64 | S&F 125mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 65 | S&F Aluminium handle cast type anodized size 150mm long, complete all as specified and directed. |
| 66 | S&F Aluminium anodised barrel tower bolt of extroded section 150mm long, complete all as specified and directed. |
| 67 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 68 | S&F 150mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 69 | M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 70 | M&L for Chequred Cement Concrete tiles 300 x 300 x 25mm thick, set jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in floor complete all as specified and directed. Please Enable Macros to View BoQ information |
