|
| 1 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 2 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 3 | Raking out joints in lime or cement mortar and preparing the surface forre-pointing or re-plastering, including disposal of rubbish to the dumping ground within 50 meters lead. |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by EIC. All Kinds of soil |
| 5 | Providing and laying of hand packed stone Soling before laying of PCC compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job. |
| 6 | Providing and laying in position cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering. |
| 7 | Providing and laying in cement concrete in 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)including curing but excluding the cost of centring and shuttering. |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : A) Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | B) Suspended floors, roofs, landings, balconies and access platforms. |
| 12 | C) Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Brick work bricks of class designation 7.5 in superstructure above plinth level upto floor five level and curing complete inCement mortar 1:6(1cement : 6 coarse sand) complete job (45km lead) |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level i/c carriage by MT |
| 15 | 12 mm thick cement sand plaster in 1:6 mix complete job |
| 16 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 17 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 18 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete 50 mm thick with 20mm nominal size stone aggregate. |
| 19 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete job including carraige. In colour such as White, Ivory, Grey, Fume Red Brown |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood |
| 22 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all shutter in mm per sqm complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).30 mm First Class deodar wood |
| 23 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 30 mm First Class deodar wood |
| 24 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge 30 mm First class deodar wood |
| 25 | Providing and fixing glazed shutters for doors, windows and clerestory windows of using 3.5 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.30mm First class deodar wood |
| 26 | Providing and fixing 8 mm thick toughened glass including wooden moulded beading in 2nd class teak wood 50x12 mm with iron screws,plugs and priming coat all job complete. |
| 27 | Providing beams and Columns including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with: Second class deodar wood |
| 28 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete: Second class Kail wood |
| 29 | Providing and laying Premium Vitrified tiles (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).(600mm x 1200 mm)Wahroom Floor |
| 30 | Floor Verandah |
| 31 | Kitchen Wall |
| 32 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge (1200x600 mm) |
| 33 | P/F of Wooden Flooring of A class laminated flooring AC4 (8mm) thick fixed on foam with proper resin material and beadings,nails etc all job complete |
| 34 | P/F of 12mm thick imported wood paneling (newzealand pine or equivalent) of approved pattern overand including base of 10mm thick plywood with frame work of Budloo finishing exposed surface with two of more coats of touch wood and polish including cost of nails, adhesive material etc. and all carriages |
| 35 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately . Chaar Gul (cealing Incl Soffit) |
| 36 | Painting with Touch wood of approved brand and manufacture to give an even shade.Two or more coats on old work |
| 37 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 38 | Providing and Fixing ornamental type vertical posts (Fully wood carving) of first class deodar wood of approved make and design including providing and applying two or more coats of melamine polishing etc complete in all respects (Size 10' long and 10\\" dia).Complete job |
| 39 | P/F DEVRI STONE FINE CHISELED PEDESTAL 24\\" X 24\\" X 24\\" IN 1:6 MIX INCLD POINTING IN 1:2 MIX I/C MOULDING OF EDGES AND TOP SLOT CORNICE PEDESTAL WITH DEPRESSED PORTION TO HOLD WOODEN POST AS PER APROVED ESIGN AND PATTERN I/C COST OF STONES COMPLETE AND ALL CARRIAGES |
| 40 | Pointing with lime surkhi including scaffolding charges and all neccessary costs complete as per directions of EIC |
| 41 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm) 18mm |
| 42 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Granite Work) |
| 43 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 44 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.a) Angles (50x50x5) |
| 45 | b) Flals (40x50) |
| 46 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 47 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in- charge. Made of G.I. wire of dia 4 mm |
| 48 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 49 | P/F track deck crill make or equivalent H.I rib profiled sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalume steel with silicon modified ployester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyester back coat over 5 micron primer coats on both surfaces incld. side and end lap and using 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area)0.50mm THICK (TATA, JSW COLORON PLUS OR EQ) I/C ALL CARRIAGES. including ridges valleys etc |
| 50 | Providing and fixing 12mm thick imported wooden panelling in linings of soffits including underneath frame work of of wooden jambs of size 50x25 mm, including wooden cornice of required size. The job shall also include finishing with tw or more coats of touchwood paint etc complete job up to the satisfaction of EIC. The job shall also include scaffolding etc |
| 51 | Providing and fixing plained eaves boarding.2nd class kail wood 250x32 mm (nominal size ) |
| 52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipesand fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc. 25mm nominal outer dia pipes. |
| 53 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 20mm nominal outer dia pipes. |
| 54 | P/F of following PVC pipes and fittings of standard quality and make (B Type) Prince or equivalent incl. jointing /testing complete100 mm dia |
| 55 | 75 mm dia |
| 56 | Plain bend75 mm |
| 57 | 100 mm |
| 58 | P trap(100 mm) |
| 59 | Reducer100 mm x75 mm |
| 60 | Floor Trap (100 mm) |
| 61 | Floor Trap (75 mm) |
| 62 | Collar 100mm with rubber washer |
| 63 | Collar 75 mm with rubber washer |
| 64 | Providing and fixing water storage tanks with PVC lid having locking arrangement (triple layer of approved quality sintex or equivalent) incl making inlet outlet and overflow connections and carriages complete |
| 65 | Providing and fixing CPVC ball valve of approved quality all job complete20 mm bore |
| 66 | 25 mm bore |
| 67 | Providing and fixing CPVC Gate valve of approved quality all job complete20 mm bore |
| 68 | 25 mm bore |
| 69 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid |
| 70 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 71 | Providing and fixing wash basin with C.I. brackets incld 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm |
| 72 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fitting setc complete job approved by engineer incharge |
| 73 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510mm bowl depth 200mm |
| 74 | P/F CP brass fittings of standard quality and make (Jaquar or equivalent)Bib Cock |
| 75 | Angle valve |
| 76 | Wall mixer |
| 77 | Health Faucet |
| 78 | Sink Mixer |
| 79 | Providing and fixing of Towel rail of superior quality with all fittings and fixtures complete |
| 80 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mmhigh and 112 mm distance from wall of standard shape with brackets ofthe same materials with snap fittings of approved quality and colour,weighing not less than 105 gms. |
| 81 | Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixedto wooden cleats with C.P. brass screws and washers complete. |
| 82 | Providing and fixing of Metal Silver Overhead Maze Shower of size 240x240 mm all job complete (Jaguar make) |
| 83 | Providing and fixing of Single lever Hi Flow in -wall divertor (Jaguar make) all job complete |
| 84 | P/F of approved quality and make geysers (Venus or equivalent) incl all necessary fittings nuts, bolts,pvc connections etc.complete 50 litres |
| 85 | Construction of cement ring type septic tank / soakage pit (ring size 1000mm) , lowering of rings and fixing of top precast cap i/c earthwork etc complete job as per directions of engineer in charge (16 No per pit) |
| 86 | Supplying and fixing C.I. cover without frame for manholes:455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. |
| 87 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.One face dressed |
| 88 | Providing and laying rough chisel dressed Devri Stone in kerbs, of size200x200 mm face with chamfer in cement mortar 1: 6 (1 cement : 6 coarse sand) including curing. |
| 89 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete125x70x4 mm (ordinary type) |
| 90 | 75x40x2.5 mm (ordinary type) |
| 91 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :150x10 mm |
| 92 | 100x10 mm |
| 93 | Providing and fixing bright finished brass door latch with necessary screws etc.complete. :200x10 mm |
| 94 | Providing and fixing bright finished brass handles with screws etc. complete125 mm |
| 95 | 75 mm |
| 96 | Providing and Fixing of Stainless steel Curtain Rods,Hold fasts and rod caps all job completeRods(15') |
| 97 | Hold fasts |
| 98 | Rod caps |
| 99 | Construction of wardrobes using BWR 19mm thick ply board (ply to ply) for frames, shutters. The job shall include fixing of dulmica of approved shade/texture on all exposed surfaces, inner linings prefrebly white (Mica), hardware fittings like hinges, handles, tower bolts. locks, hanger rail etc as per requirements of architectural drawings or as directed by the Engineer-In-charge, complete job ) (600mm deep) Face area to be measured |
| 100 | Construction of wardrobes using BWR 19mm thick ply board (ply to ply) for frames, shutters. The job shall include fixing of dulmica of approved shade/texture on all exposed surfaces, inner linings prefrebly white (Mica), hardware fittings like hinges, handles, tower bolts. locks, hanger rail etc as per requirements of architectural drawings or as directed by the Engineer-In-charge, complete job ) (450mm deep) Face area to be measured |
| 101 | Enagement of Labours for dismantling old wood work,panelling etc from tree house |
| 102 | Enagement of JCB for disposal of Unwanted material/Debris from site |
| 103 | Carriage of material by mechanical transport by an average lead of 50 kmSand/ bajri |
| 104 | Bricks |
| 105 | Carriage of material by mechanical transport by an average lead of 50 km. Devri |
| 106 | ElectricWiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch , modular plate and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or eq. make ) excl. cost of conduit. I. Group A |
| 107 | Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or eq. ) excl. cost of conduit |
| 108 | Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 6 pin 15/16 A modular socket outlet and 15/16A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent) |
| 109 | Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 2 no. 3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or eq.) |
| 110 | Supplying and fixing of modular sockets/ indicators/switches on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent) i.3 pin 5A - 10A socket. |
| 111 | ii. indicator. |
| 112 | Point wiring for 5A -10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing),(Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) excl. cost of conduit |
| 113 | Supply, installation, testing and commissioning of 12 Watt LED recessed/ mounted (round or square) Down lighters having aluminum body, minimum 100lm/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India , Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Halonix/Wipro). Commercial series. |
| 114 | Supply, installation, testing and commissioning of 200-250 mm sweep shutter type exhaust fans, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton). |
| 115 | Supply, installation, testing and commissioning of 100Watt LED Flood lighting luminaries having aluminum body, minimum 100lm/w, the luminary housing should be aluminum and the luminary optics shall have a high efficiency with transmittance, average life 50000 hours, Operating temperature -10`C to +45`C. LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/Wipro). |
| 116 | Supply, installation, testing and commissioning of 1 star 1200 mm sweep ceiling fans of Havells / Crompton Greaves/Bajaj/ Usha (Sample to be got approved), incl. cost of extension of GI rod (if required) and making of necessary connections. |
| 117 | Supply and fixing of two module stepped electronic fan regulator on the existing modular plate switch box, incl. connections but excluding modular plate etc. as reqd. |
| 118 | Supplying and fixing of modular blanking plates on existing modular plate and switch box ,excluding modular plate as required. |
| 119 | Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, excl. cost of conduits(Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent). 2 x 2.5 sq.mm + 1x 2.5 sq. mm earth wire |
| 120 | 2 x 6 sq.mm + 1x 6 sq. mm earth wire |
| 121 | 4 x 10 sq.mm + 1x 6 sq. mm earth wire |
| 122 | Supply and fixing of 6 way (4 + 18) Double door surface/ recess mounting , Horizontal type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. . |
| 123 | Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 124 | Supply, installation, testing and commissioning of 32A/40A DP rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 125 | Supply, installation, testing and commissioning of 63 A DP rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 126 | Supply, installation, testing and commissioning of 63 A TPN rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 127 | Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding 2.5 mtr. Long GI earthing electrode, 60 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2” dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound. |
| 128 | Supply, laying, connecting and commissioning of 50 sq. mm 3.5 core PVC insulated/PVC sheathed/XLPE 1.1KV Grade Aluminum ( armoured) LT cable , incl. cost of required al. thimbles duly crimped. (over head /under ground). |
| 129 | Supply, laying, connecting and commissioning of 16 sq. mm 2 core PVC insulated/PVC sheathed/XLPE 1.1KV Grade Aluminum ( armoured) LT cable , incl. cost of required al. thimbles duly crimped. (over head /under ground). |
| 130 | Supply and fixing of (25 mm dia./ 25 mm wide flat batten) medium class PVC conduits along with accessories, surface/ recessed in walls, including cutting of walls and making good the same or fixed with nails/clips or as required. |
| 131 | Supply, installation, testing and commissioning of 2KVA + (2000VA+) Power Inverter (Pure Sine Wave type) having generator compatible & provided and fitted with 2 no. 12V, 230 Ah, tall tubular batteries of Exide make and PVC trolley for resting/ housing of batteries. The job also includes terminal connections of batteries, input/ output leads of required size and length, carriage and applicable taxes. |
| 132 | Supply, installation, testing and commissioning of 850VA Power Inverter (Pure Sine Wave type) having generator compatible & provided and fitted with 1 no. 12V, 150 Ah, tall tubular batteries of Exide make and PVC trolley for resting/ housing of battery. The job also includes terminal connections of battery, input/ output leads of required size and length, carriage and applicable taxes. |
| 133 | SITC of wall/free standing floor mounted dust and vermin proof compartmentalized cubical panel for electrical Works, made out of CRCA sheet. Other parameters required as per point (a) Thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartment shaving bolted type doors with/without detachable extension type structure. (b) Panel shall be duly treated for derusting in 7 tank process with de phosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, required hardware, separate detachable gland plate M.S. base channel (min 75mm), hinged door with locking arrangement for equipment/switchgearc) Interconnection between bus bar and switch gears/cable shall be rigidly supported and made out by flexible copper wires (upto 125 amp) and by solid bus bar (> 125).(d) Only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator, CPRI Test certificates to be submitted) All as per pre approved by Engineer in charge. |
| 134 | Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type, Adjustable type) NORMAL INCOMING250 Amp, 36 KA, FP MCCB |
| 135 | Aluminum Bus Bar 500 Amp set of 4 strips |
| 136 | ON Load Change Over Switch FP 160 amp. (Front operated) |
| 137 | Aluminum Bus Bar 300 Amp set of 4 strips |
| 138 | Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Indicating Lamp, etc. |
| 139 | Outgoing63 Amp, TPN MCB 10KA |
| 140 | 63 Amp, 10 KA, DP MCB |
| 141 | Space for 12 way MCBs |
| 142 | Supply and installation of 32A modular plug/socket with 32A DP MCB for ACs |
| 143 | Supply, installation , testing and commissioning of 3 star rating 1.5 Ton Inverter type split Air Conditioners suitable for operation on AC supply single phase 50Hz 230V with hermetically sealed inverter compressor with air cooled condenser latest R410A/ R-32 refrigerant fan motor, start and run capacitors, relay and over load protector internal unit with one indoor and one outdoor unit. The indoor unit fitted on wall by employing suitable clamps and the outdoor unit will be placed on angle iron stand fitted with nut/bolts outside the room to avoid noise, including standard length of suitable size copper tubing covered with nitrile foam, topping up with refrigerant for additional length of piping if required, PVC flexible drain pipe, suitable capacity 3 core sheathed/ PVC insulated copper cable and a battery operated wireless remote. The job includes repairs to walls wherever the same are cut and the AMC of AC for a period of one and a half year from date of successful commissioning (Daikin/ Blue Star/ LG). |
| 144 | Supply, installation , testing and commissioning of relay type voltage stabilizer suitable for 1.5 Ton AC operating from input voltage 90-260Volt thereby producing output voltage of 230volts +_ 3%. (4 KVA) |
| 145 | Supply, installation , testing and commissioning of 3 KVA Petrol run ultra silent portable inverter generator. The cost includes all carriages and all applicable taxes. Model no. (EU30i) Engine type .4 Stroke, single cylinder Rated output. 2.8KVA Fuel tank capacity. 12.5 Ltr. Fuel consumption. 1.25 ltr/ hour Please Enable Macros to View BoQ information |
