Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto adistance of 50 m out side the periphery of the area cleared including carriage of material inall leads and lifts. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering including carriage of material inall leads and lifts.1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) All work up to plinth level |
| 3 | Stone soling properely hand packed filling interstics with spalls and consolidating with power road roller to the requested gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100mm spread thickness (finished work including materials and labour), complete in all respect of as per entire satisfaction of the Engineer in charge including carriage of material inall leads and lifts. |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including carriage of material in all leads and lifts. Cement mortar 1: (1 cement : 6 coarse sand) |
| 5 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level including carriage of material in all leads and lifts.Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed inpositionwithhold fast lugsor withdash fastenersof requireddia& length including hold fast lugsor dash fastener including carriage of material in all leads and lifts. Second class teak wood |
| 7 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per direction of Engineer-in-charge. including Butt hinges and necessary screws including carriage of material in all leads and lifts.Second class teak wood 40 mm thick shutters |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including carriage of material in all leads and lifts. 40 mm thick including ISI marked StainlessSteel butt hinges with necessary screws |
| 9 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws including carriage of material in all leads and lifts. 40 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood |
| 10 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in charge complete including carriage of material in all leads and lifts. Upto 5mm depth and 5 mm width |
| 11 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings including carriage of material in all leads and lifts. |
| 12 | providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) including carriage of material in all leads and lifts. 5.0 mm thick instead of 4 mm thick. |
| 13 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, (Door handle, lock and stopper etc.to be paid separately). including carriage of material in all leads and lifts. |
| 14 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. With stainless steel cover plate minimum 1.25 mm thickness including carriage of material in all leads and lifts. |
| 15 | Providing and fixing SS Godrej H-Type Glass Door Pull handle bar 32 mm outer dia, 750 mm long with SS screws etc including carriage of material in all leads and lifts. |
| 16 | Providing and fixing steel crescent lock for window/ door with necessary screws etc. complete including carriage of material in all leads and lifts. |
| 17 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position including carriage of material in all leads and lifts. Sal wood |
| 18 | Providing and fixing in wall lining flat pressed three layer (medium density) plain board or graded wood plain board Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete including carriage of material in all leads and lifts.12 mm thick. |
| 19 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood plain board Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete including carriage of material in all leads and lifts. With decorative veneering on one side and commercial veneering on other side18 MM THICK |
| 20 | Providing and fixing cup board shutters HDHMR (Sharper Image Floors, Royale Touche Laminates) with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in Charge including carriage of material in all leads and lifts. With decorative veneering on one side and commercial veneering on other side including carriage of material inall leads and lifts. 18 mm thick |
| 21 | Providing and fixing pine wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface including carriage of material in all leads and lifts. 20 mm thick |
| 22 | Providing and fixing in wall WPC, luvers wall lining (Sharper Image Floors, Royale Touche Laminates) with grooved for lining or cladding, with necessary fixing arrangement and screws etc. complete including carriage of material in all leads and lifts. |
| 23 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality including carriage of material in all leads and lifts. 1.0 mm thick |
| 24 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete including carriage of material in all leads and lifts.2nd class teak wood 50x12 mm |
| 25 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete including carriage of material in all leads and lifts. 2nd class teak wood 40x12 |
| 26 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete including carriage of material in all leads and lifts. 125 mm |
| 27 | Providing and fixing bright finished SS tower bolts (barrel type) with necessary screws etc. complete including carriage of material in all leads and lifts. |
| 28 | 250x10 mm |
| 29 | 200x10 mm |
| 30 | Providing and fixing ISI marked SS sliding door bolts with nuts and screws etc. complete including carriage of material in all leads and lifts. 250X16mm |
| 31 | Providing and fixing Isi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete including carriage of material in all leads and lifts. |
| 32 | Providing and fixing bright finished SS 100 mm mortice latch and lock with 6 levers and a pair of lever handlesof approved quality with necessary screws etc including carriage of material in all leads and lifts. |
| 33 | Providing and fixing 150 mm bright finished floor SS door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete including carriage of material in all leads and lifts. |
| 34 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws including carriage of material in all leads and lifts. |
| 35 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete including carriage of material in all leads and lifts.50 mm |
| 36 | Providing and fixing chromium plated brass handles with necessary screws etc. complete including carriage of material in all leads and lifts. 75 mm |
| 37 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of material in all leads and lifts. Triple strip vertical type |
| 38 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc including carriage of material in all leads and lifts. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. including moulding when ever is required |
| 39 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Enginee in charge including moulding when ever is required including carriage of material inall leads and lifts.Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 40 | Providing and laying PRIMERRA – NORDIC OAK Length (mm):1220 Width (mm):183 Thickness (mm):4 Category: PRIMERRA SPC Flooring Flooring of approved make including 2 mm PU Foam with accessories like Skirting, T Profile, beading, stair nose etc including carriage of material inall leads and lifts. |
| 41 | Providing and laying 8mm thick laminated wooden Flooring (bvg, pergo) of approved make including 2 mm PU Foam with accessories like Skirting, T Profile, beading, stair nose etc including carriage of material in all leads and lifts. |
| 42 | Providing and laying double charge vitrified floor tiles (Somany Kajaria) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on tile adhesive of approved manufacturer ( Sikka,Ultratech) as per the specifications of the adhesive manufacturer, grouting the joint with matching pigments etc. complete in all respect as per detail Architectural Drawing and as directed by Architect.including carriage of material inall leads and lifts. Size of Tile 600x600mm |
| 43 | Providing and laying double charge Vitrified tiles (Somany Kajaria) in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser / dado of steps, over tile adhesive of approved manufacturer ( Sikka,Ultratech) as per the specifications of the adhesive manufacturer, grouting the joint with matching pigments etc including carriage of material in all leads and lifts. Size of Tile 600x600mm |
| 44 | Providing and laying double charge antiskid vitrified floor tiles (Somany Kajaria) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on tile adhesive of approved manufacturer ( Sikka,Ultratech) as per the specifications of the adhesive manufacturer, grouting the joint with matching pigments etc. complete including carriage of material in all leads and lifts. Size of Tile 600x600mm |
| 45 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1cement :4coarse sand) including carriage of material in all leads and lifts. Medium shade pigment using 50% white cement, 50% ordinary cement |
| 46 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in Charge including carriage of material in all leads and lifts.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 47 | 15 mm cement plaster in single coat on fair side of brick / stone walls in 1: 6 (1 cement : 6 coarse sand). Including internal rounded angles chamferds not exceding in 80 mm girth including curing complete including carriage of material inall leads and lifts. |
| 48 | 20 mm cement plaster in single coat on rough side of brick / stone walls in 1: 6 (1 cement : 6 coarse sand). Including internal rounded angles chamferds not exceding in 80 mm girth including curing complete including carriage of material inall leads and lifts. |
| 49 | 6 mm cement plaster in ceiling of mix 1:3 (1 cement : 3 fine sand) including carriage of material inall leads and lifts. |
| 50 | Rough cast plaster upto 10m height above ground floor level with a mixture of sand and gravel or crushed stone from 6 mm to10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1cement : 4coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement including carriage of material in all leads and lifts. |
| 51 | White washing with lime to give an even shade including carriage of material in all leads and lifts. |
| 52 | Finishing walls with water proofing cement paint of required shade including carriage of material in all leads and lifts. New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 53 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications including carriage of material in all leads and lifts. Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 54 | Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of material inall leads and lifts. |
| 55 | Providing and applying birla white cement based putty of average thickness 1 mm, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material inall leads and lifts. |
| 56 | Finishing walls with Premium Acrylic Smooth exterior paint (asian paints) with Silicone additives of required shade including carriage of material inall leads and lifts. New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 57 | Finishing with Epoxy paint ((asian paints)) (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. including carriage of material inall leads and lifts.On concrete work |
| 58 | French spirit polishing including carriage of material inall leads and lifts. Two or more coats on new works including a coat of wood filler |
| 59 | Providing & fixing Wooden Plank ceiling With tongued and grooved jointed and wood screw (frame work to be measured and paid spearately including carriage of material in all leads and lifts. 18 mm thick Pine Wood |
| 60 | Providing, fixing & applying POP false ceiling consisting of frame G.I. channel main, cross and L & hanging member of heavy quality size & shape with wire gauge mesh. Apply P.O.P. to the expended metal of thickness 10mm thick finish smooth to line & level and design including carriage of material with all lead & lifts. complete to the entire satisfaction of Architect. make- sakarni, sriram .Curved surfaces |
| 61 | Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling including carriage of material inall leads and lifts. |
| 62 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting including carriage of material inall leads and lifts. 12.5 mm thick tapered edge gypsum moisture resistant board |
| 63 | Providing and fixing in ceiling WPC, (Sharper Image Floors, Royale Touche Laminates) with grooved for ceiling , with necessary fixing arrangement and screws etc. complete including carriage of material in all leads and lifts. 18 mm thick. |
| 64 | Providing fixing thermal insulation of ceiling / Partation (under deck insulation) with Rock wool / Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling / Partation with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling / Partation of building including carriage of material in all leads and lifts. |
| 65 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts. |
| 66 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of material in all leads and lifts. |
| 67 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete including carriage of material in all leads and lifts. Ridges/hips |
| 68 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete including carriage of material in all leads and lifts. Valley |
| 69 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete including carriage of material in all leads and lifts. Gutter 600mm over all girth |
| 70 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete including carriage of material in all leads and lifts. Flashings/ Aprons.( Upto 600 mm) |
| 71 | Providing and fixing M.S. BP Sheet 1.66 mm to 2mm (One point Sixty six to Two milimeter) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer (Base members of steel work shall be measured & paid separtely) complete in all respect of as per entire satisfaction of the Engineer in charge including carriage of material in all leads and lifts |
| 72 | Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete in all respect as per entire satisfaction of the Engineer in charge including carriage of material in all leads and lifts. 110mm dia pipes |
| 73 | Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete in all respect as per entire satisfaction of the Engineer in charge including carriage of material in all leads and lifts. PVC Plain bend 110mm dia |
| 74 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of material in all leads and lifts. 110 mm dia Shoe (Plain) |
| 75 | Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing (pidilite) treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. sprinkled @0.60kg per sqm or higher as recommended by the manufacturer's specification over the lean concrete of above cited structures. The material shall meet the requirements as specified in ACI-212-3R 2010 i.e. by reducing permeability of concrete by more than 85%, compared control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline dry- shake shall be capable of self healing of cracks up to a width of 0.50mm. The work. shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage including carriage of material in all leads and lifts. |
| 76 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose The payment will be made once irrespective of duration of scaffolding including carriage of material in all leads and lifts.Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 77 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts. |
| 78 | Providing and fixing Railing / hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including carriage of material in all leads and lifts. G.I. pipes |
| 79 | Providing and Venetain blind white wirth all complete including carriage of material in all leads and lifts. |
| 80 | Demolishing cement concrete manually/ by mechanical means including disposal of material lead Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) including carriage of material in all leads and lifts. All the rubish / mablba / similar, servisble, un servisble, dismentled and waste material is property of NABARD |
| 81 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable including carriage of material in all leads and lifts.In cement mortar All the rubish / mablba / similar, servisble, un servisble, dismentled and waste material is property of NABARD |
| 82 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, hold fasts etc. complete and stacking lead Of area beyond 3 sq. metres including carriage of material in all leads and lifts. All the rubish / mablba / similar, servisble, un servisble, dismentled and waste material is property of NABARD |
| 83 | Dismantling tile work in floor sand roofs laid incement mortar including stacking material lead. including carriage of material in all leads and lifts. For thickness of tiles 10 mm to 25 mm All the rubish / mablba / similar, servisble, un servisble, dismentled and waste material is property of NABARD |
| 84 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking including carriage of material in all leads and lifts.. |
| 85 | Dismantling roofing including ridges, hips, valleys and gutters etc., including carriage of material in all leads and lifts. G.S. Sheet |
| 86 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including Thickness above 10 mm up to 25 mm including carriage of material in all leads and lifts. All the rubish / mablba / similar, servisble, un servisble, dismentled and waste material is property of NABARD |
| 87 | Dismantling cement asbestos or other hard board/ pop ceiling or partition walls including stacking of serviceable materials and disposal including carriage of material in all leads and lifts. All the rubish / mablba / similar, servisble, un servisble, dismentled and waste material is property of NABARD |
| 88 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes lead including carriage of material in all leads and lifts. All the rubish / mablba / similar, servisble, un servisble, dismentled and waste material is property of NABARD |
| 89 | 15 mm to 40 mm nominal bore |
| 90 | Above 40 mm nominal bore |
| 91 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground lead including carriage of material in all leads and lifts. All the rubish / mablba / similar, servisble, un servisble, dismentled and waste material is property of NABARD |
| 92 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials including carriage of material in all leads and lifts. All the rubish / mablba / similar, servisble, un servisble, dismentled and waste material is property of NABARD |
| 93 | Disposal of building rubish / mablba / simialr un servisble, dismentled and waste material by mechanical mean including loading, transporting, unloading to approved MC dumping ground or as approved by engineer in charge including manuall inital lead including all leads and lifts involved including carriage of material in all leads and lifts. |
| 94 | Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the cost of cutting chases and including testing of joints complete as per direction of the Engineer-incharge. |
| 95 | 1216 (16 mm OD) pipe |
| 96 | 2025 (25 mm OD) pipe |
| 97 | 2532 (32 mm OD) pipe |
| 98 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer -in- Charge. External work |
| 99 | 20 mm nominal outer dia Pipes |
| 100 | 32 mm nominal outer dia Pipes |
| 101 | 40 mm nominal outer dia Pipes |
| 102 | Providing and placing on terace (al all floor levels) Polyethylene Water Storage Tank, IS: 12701 marked with cover and sutable locking arrangement and making necessary holes of inlet, outlet and overflow pipes but including necessary fittings atc complete in all respects as directed by the Engineer-in- Charge including carriage of material in all leads and lifts. |
| 103 | Providing and fixing high presssure PVC finolex/supreme 6kg pressure heavy duty make spigot and socket waste and ventillating pipe ISI marked including fixing with approved adhasive etc complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 104 | 110 millimetres nominal size. |
| 105 | 150 millimetres nominal size. |
| 106 | Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. as per HP.PWD / CPWD specification |
| 107 | 110 (One hundred ten) millimetres nominal size. |
| 108 | 150 mm (One hundred fifty milimeter nominal size. |
| 109 | Providing and fixing PVC ISI marked floor traps of self-cleaning design including fixing with approved adhesive complete including cost of cutting and making good the walls and the floors: as per HP.PWD specification 110x 90 mm(one hundred ten into ninety milimeter. |
| 110 | Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. |
| 111 | 110 (One hundred ten) millimetres nominal size. |
| 112 | 150 mm(seventy five milimeter nominal size. |
| 113 | Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete |
| 114 | 110 mm dia |
| 115 | 150 mm dia |
| 116 | Providing and fixing PVC door Tee ISI marked including fixing with approved adhesive etc. complete. |
| 117 | 110 mm dia |
| 118 | 150 mm dia |
| 119 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete. |
| 120 | 110 mm dia |
| 121 | 150 mm dia |
| 122 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. |
| 123 | 110 mm dia |
| 124 | 150 mm dia |
| 125 | Providing and fixing PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. 110 mm dia |
| 126 | Providing and fixing PVC cowl including carriage of materials within all leads and lifts. |
| 127 | 110 mm dia |
| 128 | 150 mm dia |
| 129 | Fixing vitreous wash water closet ( European Type - WC pan) Jaquar ARC ACS-WHT-87953BIUFSM Rimless Blind Installation Wall Hung WC with UF Soft Close Slim Seat Cover, Hinges, Accessories Set, Size: 380x520x375 mm. complete in all respect, with integral 'p' trap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) Star White including carriage of materialss upto all leads and lifts and as per direction of Engineer in charge.( snow white) Labour Rate |
| 130 | Fixing wash basin with built in counter Jaquar KUBIX KUS-WHT-35935 Table Top Basin, Size: 565x425x140 mm or equivalent series of Hindware /Jaquar including carriage of materials up to all leads and lifts and as per direction of Engineer in charge. Labour Rate |
| 131 | Fixing CP brass waste coupling Jaquar ALD-729 Click Clack Waste 32mm Size Half Thread With 80 mm Height for wash basin or sink Cera make or equivalent series of Cera /Jaquar as per direction of Engineer incharge including carriage of material upto all leads and lifts. 32 mm dia with half thread Labour Rate |
| 132 | Fixing Jaquar FLORENTINE PRIME FLP-5065 MKPM Singl lever exposed parts kit of diverter consisting of operiteing lever, Cartridege sleeve, Wall Flange with seals and button assembly sleeve and button competable with ALD-065 M including carriage of materials up to all leads and lifts. Labour Rate |
| 133 | Fixing Jaquar FLORENTINE PRIME FLP-5219PM Wall Mixer Non-Telephonic Shower Arrangement with Connecting Legs & Wall Flanges including carriage of materials up to all leads and lifts. Labour Rate |
| 134 | Fixing Jaquar OHS-1755 Overhead Shower 180mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System including carriage of materials up to all leads and lifts. Labour Rate |
| 135 | Fixing white vitreous china Flat back urinal Jaquar URS-WHT-13253N Urinal (Back Inlet) with Fixing Accessories, Size: 385x325x635 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required including carriage of material in all leads and lifts. Single half stall urinal with 5 litre P.V.C. automatic flushing cistern Labour Rate |
| 136 | Fixing Jaquar SNR-51097 Sensor Flushing Valve for Urinal with Complete Kit (Battery Operated) (Suitable For Urinal URS-WHT-13255 Labour Rate |
| 137 | Fixing Jaquar Model No. 1810-UC / 1110UC Specifications: Curved shaped urinal partition with frosted glass Glass: 8mm / 10mm Finish: JSE-CHR-110UC450X H: 900 W: 45Chrom BSP thread and shapes, weighing not less than 60 gms. Labour Rate |
| 138 | Fixing steel sink of Cera Double bowl sink with tap hole manufactured from 1.0 mm thick 304 grade stainless steel Size: 1150 x 510 mm (45\\" x 20\\") Depth: 230 mm (8”) Installation: Undermount Cat. No. B4711513SF - Satin finish equivalent Nirali/ Diamond make of approved design size: a) including carriage of materials up to all leads and lifts and as per direction of Engineer incharge. Labour Rate |
| 139 | Fixing steel sink of Cera REMY Handmade single bowl sink 304 grade stainless steel Size: 510 x 430 mm (20\\" x 17\\") Bowl Size: 460 x 380 mm (18\\" x 15\\") Depth: 230 mm (9”) Installation: Undermount Cat. No. B4711504 Satin finish Installation: Over-mountequivalent Nirali/ Diamond make of approved design size: a) including carriage of materials up to all leads and lifts and as per direction of Engineer incharge. Labour Rate |
| 140 | Fixing Jaquar QUEEN’S QQP-7307PM Sink Mixer with Short Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges PRIME or equivalent series of Jaquar/ make with 450mm braided connection pipe as per direction of Engineer incharge including carriage of material in all leads and lifts. Labour Rate |
| 141 | Fixing Jaquar SNR-51011N Sensor Faucet for Wash Basin Tap (Battery Operated) for table top wash basins with tap hole make with aerator including carriage of material in all leads and lifts. Labour Rate |
| 142 | Fixing Jaquar FLORENTINE PRIME FLP-5001BPM Single Lever Basin Mixer without Popup Waste System with 450mm Long Braided Hoses for table top wash basins with tap hole make with aerator including carriage of material inall leads and lifts. Labour Rate |
| 143 | Fixing Jaquar ORP-10037PM Bib Cock with Wall Flange with wall flange and aerator as per direction of Engineer incharge including carriage of material to all leads and lifts and Labour Rate |
| 144 | Fixing C.P. brass chain and rubber plug complete for sink or wash basin including carriage of material in allleads and lifts. 32 mm dia Labour Rate |
| 145 | Fixing bottel trap Jaquar ALD-769L 300x 190 Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange or equivalent or equivalent series of Cera /Jaquar as per the direction of Engineer -in-charge including carriage of material upto all leads and lifts Labour Rate |
| 146 | Fixing CP brass waste coupling Jaquar ALD-729 Click Clack Waste 32mm Size Half Thread With 80 mm Height for wash basin or sink Cera make or equivalent series of Cera /Jaquar 32 mm dia with half thread 32mm as per direction of Engineer incharge including carriage of material in all leads and lifts. Labour Rate |
| 147 | Providing and fixing P.V.C. waste pipe CERA Outlet connection pipe for double bowl sink without overflow B4811501 of approved make for wash basin and sink as per direction of Engineer incharge including carriage of material upto all leads and lifts. |
| 148 | Providing and fixing P.V.C. waste pipe CERA Outlet connection pipe for single bowl sink without overflowB4811503 of approved make for wash basin and sink as per direction of Engineer incharge including carriage of material upto all leads and lifts. |
| 149 | Fixing in position Jaquar ALD-573 Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook Also available or equivelent make as per direction of Engineer incharge including carriage of material in all leads and lifts. Labour Rate |
| 150 | Fixing C.P.Brass Jaquar CPA-1111L450 Single Towel Rail 450mm Long or equivalent series of Cera /Jaquar complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass(600mmx20mm) as per direction of Engineer incharge including carriage of material in all leads and lifts. Labour Rate |
| 151 | Fixing C.P.Brass Jaquar CPA-1121RD Towel Ring Round with Round Flange or equivalent series of Cera /Jaquar complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass (600mmx20mm) as per direction of Engineer incharge including carriage of material in all leads and lifts. Labour Rate |
| 152 | Fixing CP brass liquid soap dispenser Jaquar ACN 1135N Soap Dispenser with Glass Bottle r make or or equivalent series of Cera /Jaquar with CP brass brackets fixed to wooden cleats with CP brass screws as per direction of Engineer incharge including carriage of material in all leads and lifts. Labour Rate |
| 153 | Providing and fixing CERA LED MIRROR WITH TOUCH SWITCH 600 x 800 mm 5 mm thick glass mirror with Decorative high bright LED strip, Touch switch for LED light, double coat for protection and longevity and on silver plating the back for better reflection Cat. No. B3530105 of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials in all leads and lifts. |
| 154 | Fixing Corner Glass shelves Jaquar ACN-1173 Corner Glass Shelf (with Bracket) Cera /Jaquar as per direction of Engineer incharge including carriage of material in all leads and lifts. Labour Rate |
| 155 | Fixing CP brass soap dish make Jaquar AQN-7733 Soap Dish (Polycarbonate) equivalent series of Cera /Jaquar with CP brass brackets fixed to wooden cleats with CP brass screws as per direction of Engineer incharge including carriage of material in all leads and lifts. Labour Rate |
| 156 | Fixing C.P. Paper Holder Jaquar CPA-1151 Toilet Roll Holder or equivalent series of Jaquar/ Cera make as per direction of Engineer incharge including carriage of material in all leads and lifts. LabourRate |
| 157 | Fixing Jaquar JCS-WHT-2400WS Single Piece Slim Concealed Cistern with Wall Mounting Frame, Installation Kit and “S-Type” Drain Pipe Connection Set for Wall Hung WC (without Flush Control Plate) Also Available or equivalent series of Jaquar/ Cera make as per direction of Engineer incharge including carriage of material up to all leads and lifts. Labour Rate |
| 158 | Fixing Jaquar Jaquar JCP-CHR-152415 Control Plate Opal or equivalent series of Jaquar/ Cera make including carriage of material in all leads and lifts and as per direction of Engineer incharge. Labour Rate |
| 159 | Fixing Jaquar Hand Dryer - BOLT HDR-SSF-AK2803D Bolt touch-free infrared hand dryer with 1150W rated power & carbon brush motor Material: 304 Stainless Steel Finish: Stainless Steel Finish or equivalent series of Jaquar/ Cera make as per direction of Engineer incharge including carriage of material up to all leads and lifts. Labour Rate |
| 160 | Fixing Jaquar Paper Towel Dispenser - Towels with c/z Folds - Wall Mounted PTD-SAP-DT0106CSN capacity: 400-600 C/Z towels material: AISI 304 stainless steel finish: satin: Stainless Steel Finish or equivalent series of Jaquar/ Cera make as per direction of Engineer incharge including carriage of material in all leads and lifts. Labour Rate |
| 161 | Fixing Stainless Steel Jaquar WAC-SAP-BR0600 CSN Grab Bar 692 mm Long or equivalent series of Jaquar/ Cera make 350mm long including carriage of material upto all leads and lifts.Labour Rate |
| 162 | Fixing Jaquar WAC-SAP-BG0800CSN U shape Grab Bar Vertical Swing or equivalent series of Jaquar/ Cera make 350mm long including carriage of material upto all leads and lifts. Labour Rate |
| 163 | Fixing Jaquar FUS-29083K Exposed Part Kit of Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (compatible with ALD-083, ALD-089 or ALD-081) Make or equivalent series of Jaquar/ Cera make with flange as per direction of Engineer incharge including carriage of material to all leads and lifts. Labour Rate |
| 164 | Fixing P.V.C connection Jaquar ALD-805B 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for Geysers) length with brass unions 300/450mm length incharge including carriage of material to all leads and lifts. Labour Rate |
| 165 | Fixing 100mm dia C.P. Grating including carriage of material in all leads and lifts and as per direction of Engineer incharge. Labour Rate |
| 166 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc including carriage of material inall leads and lifts. External work |
| 167 | 15 mm dia nominal bore |
| 168 | 20 mm dia nominal bore |
| 169 | Providing and fixing G.I. Union (ISI Mark) as per direction of Engineer incharge including carriage of material in all leads and lifts. |
| 170 | 15 mm dia |
| 171 | 20 mm dia |
| 172 | 25 mm dia |
| 173 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof including carriage of material in all leads and lifts. |
| 174 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and insideplastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of material inall leads and lifts. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 175 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of material inall leads and lifts. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
