|
| 1 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture.(New work) |
| 2 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade Old work (one or more coats) including carriage of materials in all leads and lifts. |
| 3 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters Kiln seasoned and chemically treated hollock wood. |
| 4 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for flooring and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.50 sqm |
| 5 | Providing wood work in trusses, purlins, rafters, posts, post plates, wall plates and the like wrought framed, hoisted and fixed in position. complete including carriage of materials within all leads and lifts :-2nd class deodar wood. |
| 6 | Providing and fixing 50x12 mm size wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. in 2nd class teak wood complete including carriage of materials within all leads and lifts. (2nd class teak wood) |
| 7 | Providing and fixing 0.63 mm thick Colour Coated PGI sheet ceiling/lining of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts. |
| 8 | Removing and Refixing of C.G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses including carriage of materials within all leads and lifts |
| 9 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm dia nominal bore |
| 10 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore |
| 11 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 50 mm nominal bore |
| 12 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
| 13 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.50 mm dia nominal bore |
| 14 | Providing and fixing Elbow of 50mm diaof approved quality (screwed end) : |
| 15 | 25mm Elbow |
| 16 | Providing and fixing Tee of approved quality (screwed end) :25 mm dia nominal bore |
| 17 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 50 mm dia nominal bore |
| 18 | Union 25mm |
| 19 | Union 15mm |
| 20 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 21 | Providing and fixing Tank Nipple of 50 mm diaof approved quality (screwed end) : |
| 22 | Providing and fixing Tank Nipple of 15 mm diaof approved quality (screwed end) : |
| 23 | Providing and fixing Float valve of 25 mm dia of approved quality (screwed end) : |
| 24 | Providing and fixing extension Nipple of 50mm diaof approved quality (screwed end) :50 mm long |
| 25 | 75 mm long |
| 26 | 100 mm long |
| 27 | 150 mm long |
| 28 | Providing and fixing extension Nipple of 25mm diaof approved quality (screwed end) :50mm long |
| 29 | 225mm long |
| 30 | Providing and fixing reducer of approved quality (screwed end) :50mm to 25mm |
| 31 | Second class half brick work using common burnt clay building bricks cement mortar 1:4 (1 cement : 4 sand):- In superstructure above plinth level upto floor two level. including carriage of materials in all leads and lifts. |
| 32 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size of tiles 600x600mm thick including carriage of materials within all leads and lifts. |
| 33 | Providing and fixing 8 mm thick PVC paneling and lining with necessasry screw complete including carriage of material with in all leads and lifts as per direction of engineer in charge. |
| 34 | 15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth in Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials within all leads and lifts. |
| 35 | Providing and fixing 12mm thick water proof shuttering ply of standard quality ISI mark and approved shade and colour in panelling/flooring/cup-board and wall linning including mitring at junctions, butt measured and paid for separately) complete including carriage of material within all leads and lifts. |
| 36 | Providing and fixing M.S. welded mesh 25mmX25mmX2mm thick as per approved design complete by welding with electrical plant complete including applying priming coat of red lead paint as per HP.PWD. Specification 1990 Volume-I and including carriage of materials upto all leads and lifts by mechanical means and manual labour and as directed by the Engineer in Charge. |
| 37 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer |
| 38 | Repair and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 40 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint including carriage of materials within all leads and lifts |
| 39 | Providing and Fixing Bright Retro Print on Sunboard for Signage of fire Escape & Exist, Traffic, and for other Signage fixing in the Building, on roads etc including all tax with all leads and Lift complete as per direction of engineer In charge. (Lowest Rate per Qutations Attached without GST) Please Enable Macros to View BoQ information |
