|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within all leads (wooden/concrete joists to be measured and paid for separately) For all thickness of tiles including carriage of materials in all leads and lifts |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 5 | Providing Tata Durashine corrugated GI. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/ m²as per the direction of Engineer in Charges including carriage of materials within all leads and lifts. |
| 6 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm 8.50 (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns using self drilling/ self tapping screws complete:-(1) Ridges plain (500mm-600mm). |
| 7 | Providing and fixing Plain galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete including carriage of materials within all leads and lifts:- Flashings/ Aprons.( Upto 600 mm). |
| 8 | Providing precoated 0.40mm thick Tata Liner sheet in wall lining/ ceiling including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 9 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 10 | Providing and fixing M.S. BP Sheet 2mm thick in eaves board/facia/ soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge |
| 11 | Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of materials within all leads and lifts:-Plain Glass:5.50 mm thick |
| 12 | Providing and fixing ISI marked Factory made Flush Doors shutters decorative type core of PVC block board Phenol bonded termite resistant and water proof core of block board construction with full frame of first class hard wood and well match of flush door shutters conforming to IS:2202 (Part-I) (i) 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size) |
| 14 | Preparing the surface to receive waterproofing treatment with five coats by removal of previous waterproofing treatment and making surface ready to receive wterproofing treatment, cleaning the surface with wire brushes to clean, smooth & dry surface free of any loose particles/reinforcement bars/debris etc Grooving and cleaning all the existing cracks and repairing them with polymer modified mortar washing if required (to be decided by our site incharge) before applying waterproofing coat.Providing and applying two coat of Brawnflex supertop over single of Brawnflex Prime Primer as per site requirement and complete in all respect including all leads lifts and carriage of material at site as directed by the Engineer in charge allowing drying gap between successive coats. |
| 15 | Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level.Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 16 | 15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) within all leads, lifts of materials and other incidentals. |
| 17 | Providing and laying cement concrete 1:2:4 (1 cement:2 sand :4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work including carriage of materials in all leads and lifts in foundation and plinth. |
| 18 | Providing and laying rectified Glazed Ceramic floor tiles sqm of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 19 | P/L ceramic glazed tiles of size 6000x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:3 (1 Cement : 3 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete |
| 20 | Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including carriage of materials in all leads and lifts. |
| 21 | Painting wood work with Deluxe Multi Surface Paint of required shade. one or more coat on old work of approved brand and manufacture.including carriage of materials in all leads and lifts. |
| 22 | Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of materials within all leads and lifts |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including carriage of materials and as per the direction of the Engineer-in-Charge. |
| 24 | Providing and fixing high pressure PVC (finolex) Type-B spigot and socket, waste and ventilating pipes ISI marked with collar and clamps including fixing with approved adhesive etc. complete. including carriage of materials within all leads and lifts :-150mm nominal size |
| 25 | Providing and fixing PVC (Finolex) Door bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150 mm dia. |
| 26 | Providing and fixing PVC (Finolex) Collar ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150 mm dia. |
| 27 | Providing and fixing PVC Finolex plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (i) 150mm nominal size |
| 28 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :(i) 2nd class deodar Wood including carriage of materials within all leads and lifts. |
| 29 | Providing and fixing 9mm thick water proof shuttering ply of standard quality ISI mark and approved shade and colour in panelling/flooring/cup-board and wall linning including mitring at junctions, butt measured and paid for separately) complete including carriage of material within all leads and lifts. |
| 30 | Providing and fixing 6mm thick plywood of standard quality ISI mark and approved shade and colour in panelling/flooring/cup-board and wall linning including mitring at junctions, butt measured and paid for separately) complete including carriage of material within all leads and lifts. |
| 31 | Providing and fixing 12mm thick imported pine wood ceiling/paneling with tongued and grooved jointing of standard quality ISI mark and approved shade and colour complete including carriage of material within all leads and lifts as per direction of Engineer-in-Charge. |
| 32 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.40mm thick. 2nd class deodar wood. |
| 33 | Providing and fixing HDF decorative laminate core board German flooring AC4 class 32, 8mm thick placed over cushion of 2mm thick expended polethene foam plus 100 Microne thick polethene sheet under lay No. 045 Beech West including border of required shade and colour complete in all respect upto all floor levels as per direction of Engineer in charge including carriage of material in all leads and lifts. |
| 34 | Polishing two or more coats with PU polish of required shade on wood and wood based surfaces to give an even surface i/c cleaning the surface of all dirt,dust and sand papered smooth and i/c a coat of wood filler. |
| 35 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge |
| 36 | Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts |
| 37 | Providing and fixing 19mm thick Commercial Board shutters for up boards including fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts |
| 38 | Providing and fixing 0.80mm thick coloured or plain laminated sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts |
| 39 | Providing and fixing 1.00mm thick coloured or plain laminated sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts |
| 40 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts. |
| 41 | Providing and fixing fashner for fixing cupboard in wall complete including carriage of materials in all leads and lifts. |
| 42 | Providing and fixing 75mm size special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete including carriage of materials in all leads and lifts. |
| 43 | Providing and fixing ISI marked steel handles conforming to with necessary screws etc. complete :(i) 150mm |
| 44 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) (i) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 45 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 46 | Providing and fixing ACP sheet 3mm thick in aluminium ceiling/lining/partitions with PVC neoprens gasket fixed with self drilling screws etc. complete as per Architect drawings and by the Engineer-in-Charge including carriage of materials within all leads and lifts. (Cost of aluminium snap beading shall be paid in basic item). |
| 47 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :- 150*10 mm including carriage of materials within all leads and lifts. |
| 48 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. 200 mm including carriage of materials within all leads and lifts. |
| 49 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid |
| 50 | Providing and fixing wash basin with pedstal C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 51 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 52 | Providing and fixing 32 mm dia P.V.C. waste pipe Viking for sink or wash basin including P.V.C. waste fittings completeincluding carriage of materials within all leads and lifts. |
| 53 | Providing and fixing 100mm C.P. grating viking for floor or nahani trap including carriage of materials within all leads and lifts. |
| 54 | Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of materials within all leads and lifts. |
| 55 | Providing and fixing C.P. brass bib cock of approved quality including carriage of materials within all leads and lifts: |
| 56 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality including carriage of materials within all leads and lifts:15 mm nominal bore |
| 57 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge 15 mm nominal bore |
| 58 | Providing and fixing PVC connection pipe with brass union including carriage of materials within all leads and lifts:-300mm length:-15mm nominal bore |
| 59 | Providing & fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor 15mm nominal bore |
| 60 | Providing and fixing G1 union 15mm including carriage of materials within all leads and lifts |
| 61 | Providing and fixing high pressure PVC (Finolex)Type A spigot and socket, waste and ventilating pipes including collar and clamps ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-(i) 110mm dia. |
| 62 | Providing and fixing PVC Finolex plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (i) 110mm nominal size |
| 63 | Providing and fixing PVC Finolex 45 degree bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (i) 110mm nominal size |
| 64 | Providing and fixing 110mm x 75mm size PVC Finolex type \\"A\\" floor trap (Si marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts |
| 65 | Providing and fixing PVC Finolex door bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (i) 110mm nominal size |
| 66 | Providing and fixing PVC Finolex Collar ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (i) 110mm nominal size |
| 67 | Providing and fixing Wall mixer telephonic arrangement including connection fitting complete in all respect of make complete including carriage of materials within all leads and lifts TM-136* Single lever wall mixer with telephonic shower arrangement only |
| 68 | Providing and fixing Central hole basin mixer without pop-up waste system with 450 mm long flexible hose complete including carriage of materials within all leads and lifts Cat No-T-118. |
| 69 | Providing and fixing 600mmx120mm acraylic glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts.Cat AC-107 |
| 70 | Providing and fixing 600mm X 20mmm size C.P. Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. screws including carriage of materials within all leads and lifts:-ESS ESS Trend series AC-101. |
| 71 | Providing and fixing towel ring complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. ESS ESS made AC-102 complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
| 72 | Providing and fixing Soap holder with Acralic Dish AC-503 including carriage of materials within all leads and lifts. |
| 73 | Providing and fixing frosted plain polycarbonated sheet 2.0mm thick in roofing / lining self drilling screws or with galvanised J or L hooks bolts and nuts with G.I. limpet and bitumen rubber washer complete with all accessories as required to complete the job in all leads and lifts as per direction of Engineer-in-charge. |
| 74 | Providing and Fixing of Ess-Ess Curtain Rod 25mm thick Ess Ess 304 Grade of approved brand at Dental college & Hospital including carriage of materials within all leads and lifts. |
| 75 | Providing and fixing sliding channels with roller of required size of standard quality with necessary screws / nails etc complete including carriage of materials within all leads and lifts at High Court of Himachal Pradesh Under Vidhan Sabha Sub Division including carriage of materials within all leads and lifts. Please Enable Macros to View BoQ information |
