|
| 1 | Reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete. Above Plinth level. Thermo-Mechanically Treated bars |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 3 | Suspended floors, roofs, landings, balconies and access platform. |
| 4 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 5 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement : 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 8 | Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in. Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : Local best quality Tolhao wood. |
| 10 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Local best quality Local best quality Tolhao wood. 30 mm thick shutters |
| 11 | 12 mm cement plaster of mix: 1:4 (1 cement : 4 fine sand) |
| 12 | Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. Hot finished welded type tubes |
| 13 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with. Precoated galvanised iron profile sheets 0.50 mm thick |
| 14 | Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Ridges plain (500 - 600mm). Precoated galvanised iron profile sheets 0.50 mm thick |
| 15 | Gutter (600 mm over all girth). Precoated galvanised iron profile sheets 0.50 mm thick |
| 16 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) . |
| 17 | Float glass panes. 4 mm thick glass panes |
| 18 | Providing and fixing tiled False Ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 120 gsm/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications, drawings and as directed by Engineer-in-Charge. (The rate is excluding the cost of tiles which will be paid for separately ). |
| 19 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. In grating, frames, guard bar, railing, brackets, gates and similar works. |
| 20 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 21 | Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. 8 mm thick. |
| 22 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests |
| 23 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 24 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm |
| 25 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 26 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. |
| 28 | 15 mm nominal outer dia Pipes |
| 29 | 25 mm nominal outer dia Pipes |
| 30 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm |
| 31 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 32 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture |
| 33 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 34 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even smooth complete. |
| 35 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer:- |
| 36 | Finishing walls with Deluxe Multi surface Paint system for interiors and exteriors using Primer as permanufacturers specifications: Two or more coat applied @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr/10 sqm |
| 37 | Sub-Head No. I (Wiring) |
| 38 | Wiring for light point / Fan point / Exhaust Fan point / Call bell point with 1.5 mm2 FR PVC insutated copper conductor single core cable in PVC casing & capping with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5 mm2 FR PVC insulated copper conductor single core cable etc. as reqd. |
| 39 | 1. Light point -- Group B - 168 |
| 40 | 2. Fan point -- Group B - 44 |
| 41 | 3. Exhaust Fan Point Group B - 8 |
| 42 | Total |
| 43 | Wiring for Power Plug point with 2 x 4 mm2 FR PVC insutated copper conductor single core cable in PVC casing & capping along with 1 no. 4 mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as reqd. |
| 44 | Wiring for circuit / Sub - main wiring along with wire with the following size of FR PVC insulated copper conductor single core cable in PVC cassing & capping etc. as reqd. |
| 45 | 1. 2 x 1.5 mm2 + 1 x 1.5 mm2 earth wire |
| 46 | 2. 2 x 2.5 mm2 + 1 x 2.5 mm2 earth wire |
| 47 | 4. 2 x 6 mm2 + 1 x 6mm2 earth wire |
| 48 | 5. 2 x 10 mm2 + 1 x 10 mm2 earth wire |
| 49 | P/S 25mm2 ISI Marked PVC insulated Al. Cond (ATC Cable) S/Core Cable |
| 50 | Sub-Head No. II (Fitting & Switch Gear) |
| 51 | Providing and Fixings ( following capacity TP & N ) dis-connector fuse switch unit inside the existing cubical panel board with ISI marks HRC fuses including drilling holes in the cubical panel board, making connection as reqd. |
| 52 | 3. 100 amp. TP & N |
| 53 | 5. 320 amp. TP & N |
| 54 | S/F Bus bar chamber with 4 strips bus bar of length 300 mm suitable for 100 amp capacity complete with all accessories i/c connection, earthing the body etc. as reqd. |
| 55 | S/F Bus bar chamber with 4 strips bus bar of length 300 mm suitable for 200 amp capacity complete with all accessories i/c connection, earthing the body etc. as reqd. |
| 56 | Supply and fixing wall mounted metal board of welded contruction with minimum 35mm x 35mm x 6mm angle iron frame work with 25 mm x 6mm flate iron as intermediate members i/c painting etc. as reqd. |
| 57 | S/F ( following way), single pole and neutral, sheet steel MCB distribution board, 240 V on surface / recessed complete with tinned copper bus bar neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCCB knobs detachable gland plate , interconnection, phosphatized and powder painted including earthing etc. as reqd. ( but without MCB / RCCB / Isolator) |
| 58 | 2. 2 + 8 way |
| 59 | S/F ( following rating) double pole 240 V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd. |
| 60 | 1. 40 amp |
| 61 | 2. 63 amp |
| 62 | Supplying and fixing 5 amp to 32 amp rating 230 V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection, testing and commissioning etc. as reqd. |
| 63 | 1. Single Pole |
| 64 | S/F 56 \\" sweep (1400 mm) A.C ceiling fan complete with down rod, canopy, 3 (three ) blades but without regulator etc. as reqd. ( Make Bajaj / Usha or similar ) |
| 65 | S/F 305 mm sweep exhaust fan complete with all accessories i/c connection etc. as reqd. |
| 66 | S/F 23 W CFL lamp |
| 67 | S/F brass batten/angle holder i/c connection etc as redq. |
| 68 | S/F 3 pin 5 amp ceiling rose on the existing junction box / wooden block i/c connection etc. as reqd. |
| 69 | Supplying & Fixing stepped type electronic Fan Regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd. |
| 70 | Supply & Fixing( following piano type switch / socket) on the existing switch box / cover i/c connection etc. as reqd. |
| 71 | 1. 5 / 6 amps switch |
| 72 | 3. 15 / 16 amps switch |
| 73 | 4. 3 pin 5/6 amps socket outlet |
| 74 | 5. 6 pin 15/16 amps socket outlet |
| 75 | 101.6mm x177.8mm ( 4\\" x 7\\") PVC board |
| 76 | Square PVC box 12mm to 32 mm ( 3 \\" x 3\\" ) |
| 77 | S/F 15 ltr. Water heater ( Geyser ) A.C 2 Kw vertical type with all accessories, ( 150557 SKT - PLUS 15 L ) i/c connection etc. as reqd. |
| 78 | Sub-Head No. III (Area Lighting) |
| 79 | Wiring for light point with 1.5 mm2 FR PVC insutated copper conductor single core cable in surface / recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5 mm2 FR PVC insulated copper conductor single core cable etc. as reqd. |
| 80 | 2. Group C |
| 81 | Wiring for circuit / Sub- Main wiring along with earth wire with ( the following sizes of ) FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc. as reqd. |
| 82 | 1. 2 x 2.5 mm2 + 1 x 2.5 mm2 earth wire |
| 83 | Providing and Fixings ( following capacity TP & N ) dis-connector fuse switch unit inside the existing cubical panel board with ISI marks HRC fuses including drilling holes in the cubical panel board, making connection as reqd. |
| 84 | 1. 32 amp. TP & N |
| 85 | S/F Symmetric beam integral flood light luminaries HPSVT lamp up to 250 W grey powder coated die-cast Al. housing complete with all accessories i/c connection etc. ( Ref code no. BJEMFS - 250 SV WOB / 180377 ) ( BJOS 250 SV / MH ) Please Enable Macros to View BoQ information |
