|
| 1 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in- charge. |
| 2 | Supply and installation of SS 304 Clip-In False Ceiling System with 600x600 mm tiles made from 0.50 mm thick stainless steel (brush finish), square edge, demountable design.Suspension system shall consist of M8 threaded rods fixed to RCC slab using M8 bullet fasteners, nuts and washers. GI suspension angles (10x35x10 mm, 3000 mm length, 0.6 mm thick) shall be installed at 1200 mm spacing. Suspension angles shall be connected using suspension angle holders to ensure proper alignment and stability. Further, GI clip-in profiles (35x25 mm, 3000 mm length, 0.5 mm thick) shall be installed at 600 mm c/c spacing. Profiles shall be secured to suspension angles using profile holders (hold-on clamps) for rigid support. SS 304 wall angle (24x24 mm, 0.5 mm thick, brush finish) shall be installed along the perimeter for edge support. Tiles shall be fixed using spring clip-in mechanism ensuring secure locking and easy maintenance access. Rate includes all materials, accessories, labour, tools, and complete installation as per specifications and site conditions. |
| 3 | Providing and fixing of false ceiling of 12.50mm thick tapered edge gypsum plain board confirming to IS :2095-(Part I): 2011 (BIS Certification) in true horizontal level/vertical level as per the site condition,the supporting framing structure shall be made of GI /MS with box framing as required at the site.The 12.50mm thick tapared edge gypsum plain board IS :2095-(part-I):2011 (BIS Work as per the design/drawing ,including all part of the work to make it complete item ,welding fabrication etc,inclusive of all the necessary accessories like clamps,cleat angle,screws etc with complete item ofthe work for all heights as per specifications,design,drawing and as directed by Engineer-in -charge. |
| 4 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 5 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. |
| 6 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 7 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 8 | 25mm thick |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 10 | One or more coats on old work |
| 11 | Providing and fixing Vitreous chaina under counter wash basin as per IS:2556(Part-4) of minimum size 560x450mm(Hindware-Zen-10049) .in white colour of approved make and quality.All junctions will be sealed with silicon sealent.Rate shall include with C.I. brackets, 15 mm C.P. brass pillar taps(Pressimatic pillor cock-Jaquar-FUS-CHR-29001), 32 mm C.P. brass waste of standard pattern PTMT Bottle Trap(ALD-CHR-769L300x190-Jaquar),PTMT - Waste Coupling 38/40 mm-(Jaquar-ALD-709-130), including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 12 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in - charge. |
| 13 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 14 | Engaging of a skilled welder and Helper for carrying out welding works including fabrication, cutting, joining, fixing of steel members, etc., complete as per directions of Engineer-in-Charge.(Including cost of welding electrodes, gas, and equipment). |
| 15 | Providing, supplying and fixing pre-painted metal door frame and shutter single leaf of approved make as per particular specifications with overall size as per site requirement. Door frames shall be made with 1.2 mm thick galvanised steel sheet pressed to single rebate profile of size 100x70mm with Mitered Joint. Door shutter shall be made with 0.8 mm thick galvanised steel sheet pressed formed to provide not less than 46mm thick fully flush double skin panel with lock seam joints at style edges. The internal construction of panel shall be honeycomb. Shutter and frame shall be finished with zinc phosphate steel primer & polyurethene paint etc. complete. |
| 16 | The frame and shutter shall also have provision for required iron mongery(by providing extra metallic reinforcement).The shutter is to be fixed to frame with SS304 ball bearing hinges of size 100x75x3mm, mortise dead lock, door closure, ss D handle on both sides, view panel of toughened glass,towerbolt, all complete hardware of approved make & size as per the directions of Engineer-In-Charge. The rate includes cost of pre-painted frame and shutter,door fittings/hardware for fixing door including fixing charges for all levels and leads etc. The clear opening in masonry shall be measured for payment. |
| 17 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side of waistslab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 18 | Supplying ,Installation, Testing and Commissioning of IoT based Ultrasonic type digital water flow meters with automatic meter reading with inbuilt metrology 4G /5G telemetry units (diameter wise) Lithium Battery operated (With GSM/GPRS technology) enabled with 02 Nos of SIM configuration- 4G/5G in each unit of ultrasonic digital water meters for Domestic /Non-Domestic and High consumption consumers (the meters are confirming to ISO 4064-2014 with latest amendments with valid life cycle test certificate from FCRI (Fluid Control research Institute) and protection class of IP 68) for different types of diameter pipelines of inclusive of required appropriate size flanges, suitable pipes CPVC/GI/DI/uPVC inluding fittings like elbows, tees, tapers, nuts, bolts, washers, rubber insertions and also cost includes fabrication, cutting, jointing, flange welding etc all operations including necessary modificaations and testing of pipe & water meter joints complete as per the directions of Engieer in charge. (Please refer to the attached Annexure- 1 for technical specifications of above said IoT based ultrasonic digital watermeters). |
| 19 | DN32 mm dia Nominal Bore |
| 20 | DN40 mm dia Nominal Bore |
| 21 | DN50 mm dia Nominal Bore |
| 22 | Providing Annual Maintenance Comprehensive (AMC) Services for 4 years on completion of Defect Liability Period (DLP) of 1 year for the entire system for all the Ultrasonic Digital Water Meters as Installed under Sl.No.(1) item including:(a) the cost of communication for using 4G /5G SIMs, cloud hosting, software dashboard, SMS /email alerts(b)02 Nos uniterrupted SIM network maintenance including 4G/5G SIM recharge for the entire length of 4 years of AMC period for all the meters.(c) One time replacement of Lithium battery of required voltage for each meter for the entire 4 years of AMC period for the all the meters as installed under Sl.No.(1). (d) Complete accessories as required to be replaced for mal-functioned water meters for functioning of those well. (e) The issues needs to be addressed within 24 hours time limit otherwise the penality will be imposed as per the terms and conditions of the contract agreement. (f) This inlcuding maintenance of the approved premium software and dashbaord for the the entire 4 years AMC period as per the Contract by taking care of bugs, glitches, crashes, dats losses, networs issues, user quash etc and informing meter readings atleast one reading per one meter per day for all the meters as installed under Sl.No.(1) item.(g) The faluty meters shall be replaced with new one as necessitated with complete accessories & consumables under the warranty period of the meters without addditional cost . On completion of Warranty period of digital meters, the faulty mal-functioning meters shall be installed with new one as per the requirement on the payment basis. (h) The other related charges for data transmission/communication/networks related / network upgrading charges shall be borne by the Contractor during the entire 04 years of O & M period and also(i) The maintenance of Software and Dashboard for Water Management Monitoring /budgeting for the entire 04 years of O & M period shall be borne by the Contractor (Note: After the completion of the one-year free Defect Liability Period(DLP) then the AMC period will be commenced as per the contract). |
| 23 | Supply and laying of 63mm dia HDPE PN10 PE100 Pipe(Supreme Make) including cost and conveyance of all materials to site of approved quality,Including the jointing of pipes and fittings and testing of joints complete as per direction of Engineer - in - charge. |
| 24 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 25 | All kinds of soil |
| 26 | Pipes, cables etc, not exceeding 80 mm dia. |
| 27 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 28 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall |
| 30 | 20 mm nominal dia Pipes |
| 31 | 40 mm nominal dia Pipes |
| 32 | Providing and fixing of brass ball valve(Zoloto) along with brass MTA fittings of approved quality : |
| 33 | 20mm Dia |
| 34 | 25mm Dia |
| 35 | 40mm Dia |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Flanges, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 37 | 65mm Dia |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Union, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 39 | 65mm Dia |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Tee, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer -in -Charge. |
| 41 | 65mm Dia |
| 42 | Providing and fixing Butterfly Valves-65mm(Zoloto make) complete with bolts, nuts, rubber insertions etc. : |
| 43 | 65mm Dia |
| 44 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : |
| 45 | With common burnt clay F.P.S.(non modular) bricks of class designation 3.5 |
| 46 | Providing and fixing of wash basin pillar cock (Jaquar make) Model no.FUS-CHR-29001 including fitting and testing of joints complete as per direction of Engineer - in - charge. |
| 47 | Providing and fixing of wash basin pillar cock (Jaquar make) Model no.FUS-CHR-29037 including fitting and testing of joints complete as per direction of Engineer - in - charge. |
| 48 | Providing and fixing to existing door frames. |
| 49 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thicknessof 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
