|
| 1 | Taking down cement or cement lime plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L for Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note-water proofing compound shall be measured and paid for separately. |
| 3 | M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete, all as specified. |
| 5 | Supply only liquid water proofing compound complete all as specified & directed |
| 6 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 7 | M&L for brick work with sub class 'B' bricks (Old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) complete all as specified and directed |
| 8 | M&L, for Brick work with sub class 'B' bricks (Old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) but except bricks complete all as specified and directed. |
| 9 | M&L Brick work with sub class 'B' bricks (Old size), straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specified and directed. |
| 10 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level, complete all as specified and directed. |
| 11 | M&L for 75 mm thick Cement concrete type D-1, (1:4:8 using 20 mm graded crushed stone aggreates) as in flooring complete all as specified and directed complete all as specified and directed. |
| 12 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed aggregate )as in flooring surface to receive the topping layer complete all as specified and directed |
| 13 | M&L 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc complete all as specified and directed |
| 14 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 15 | M&L for 300x300x25mm thick (M-35) glossy finish polished red color Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. |
| 16 | S&F Rubber moulded precast coloured concrete Interlocking paver blocks any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing interlocking tiles etc complete, all as specified and directed. |
| 17 | M&L for dismantling precast coloured concrete Interlocking paver blocks any shape and size and refixing with & including 25mm thick sand cushioning layer complete, all as specified and directed. |
| 18 | M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete incl dismantling of Old kota stone all as specified and directed. |
| 19 | M&L for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to walls, rounding edges and making good by pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite over and including cement screed bed Cement Mortar (1:6) 15 mm thick colour of granite as approved incl demolition of old stone all as specified and directed by Engr-in-Charge. |
| 20 | M&L for mirror polishing incl Cutting and grinding of existing Granite/kota/terrazo stone floor surface on horizontal and vertical surface and finally finishing the surfaces uniformally by applying floor polish to give high gloss finish complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 22 | M&L for Vitrified ceramic tiles of premium quality of Group B I (a) any shade 10 mm thick (square/rectangular), area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:6 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 23 | All as per description of serial item No. above but on dado/skirting/vertical surfaces over 10 mm thick rendering in CM 1:4 complete. |
| 24 | M&L for Glazed ceramic coloured tiles of 1st quality of size 450 mm x 350 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 25 | M&L for Coloured glazed vitrified ceramic tiles premium quality of Group B I (a) size (1200 mm x 600 mm x 8 to 10mm thick), any shade as approved by Engr-In-Charge, set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments in vertical surfaces including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)complete all as specified and directed. |
| 26 | S&F non skid vitrified tiles of premium quality of Group B I (a) , heavy duty, exterior grade, any pattern of size 300x300mm/ 400x400mm 10-12 mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4, incl demolition of Old tiles, complete all as specified and as directed. |
| 27 | M&L for Factory made Precast heavy duty RCC drain cover 80mm thick with using 10mm dia reinforcement TMT bars (150mm c/c both ways) including 1.00mm thick MS black sheet frame on edges with two coats of antecorresive paint over primer all complete incl removal of old drain covers out of MoD land as specified and directed. |
| 28 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 29 | M&L for RCC (1:2:4) type B1 (Using 20mm graded crushed stone aggregate) in Slabs supported on walls, beams and columns, floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 30 | Use and Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc in fair finish surface. |
| 31 | Mild steel TMT bars 8mm dia and over, bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as directed. |
| 32 | Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position |
| 33 | S&F rolled mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed |
| 34 | S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as directed including dismantling existing sheet complete all as specified and as directed. |
| 35 | S&F Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet complete all as specified and directed. |
| 36 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work,incl locking arrangement for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified. |
| 37 | S&F Hard Drawn steel wire fabric cut to length bent to shape required and tying,welding to the angle iron frame etc complete all as specified and directed. |
| 38 | Taking down Collapsible steel gates, area exc 2.00 sqm but n.exc 6.00 sqm, consisting of channel pickets, pivoted flat bars, top and bottom runners, handles etc., and making necessary repairs like oiling, greesing, tightening loose nuts, bolts, rivets etc, replaceing missing small articles to make it functional, erected and fixed in old position and securing runners with holdfasts and brackets, complete all as specified |
| 39 | Taking down Aluminium shutters, area exc 1.50 sqm but n.exc 4.00 sqm, and making necessary repairs like oiling, greesing, tightening loose nuts, bolts, rivets etc, replaceing missing small articles to make it functional, erected and fixed in old position, complete all as specified |
| 40 | M&L for Machine pressed (factory made) plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), kerb stone of any size, laid in trenches on edges of roads joints fitted in CM 1:4 including excavation in any type of soil, PCC bed, returning filling and removal of surplus soil to a distance not exceeding 50 m from the starting point complete all as specified and directed. |
| 41 | S&F 4 mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605 mm fixed with 2mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable \\"J\\" hook consisting of two Nos washers and two nuts at 1.2 mtr centres all as specified and as directed by Engineer-in charge (size of main tee 38 mmX25 mmX 1.4 mm, cross tee 38 mm X 25 mm X 1.4 mm angle along walls 38 mm X 25 mm X 2.0 mm) complete all as specified and directed including dismantling boarding any description fixed in any position with nails complete all as specified and as directed. |
| 42 | M&L, for roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of cold applied bituminous oil based primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen VG- 30 grade @ 1.00 Kg/Sqm after a interval of minimum 8 hours of priming and layilg of APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method after a interval of minimum 8 hoursof hot bitumen coating by authorised applicator of manufacturer of approved make laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign matter by wire brushing, cleaning off surface with water and removal of spoil etc including removal of debris from site beyond defence land,complete all as specified nand directed. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator as approved. 2. Work shall be executed upto triple storied building. 3. The work shall be carried out in stages and each stage shall be passed by Engr-in-Charge. |
| 43 | Providing 20mm thick plaster in ready mix plastering over roof mixed with (Water proofing compound) (Liquid) as per manufacturers instructions including brushing neat cement slurry @ 3 Kg/Sqm over Old RCC roof including taking down existing plaster on roof complete all as specified and as directed. Note : Water proofing compound (liquid) shall be measured and paid seperately. |
| 44 | Providing and applying single component solvent base Pure polyurethane liquid membrane for the concrete roof surfaces in two coats @1.85kg/ sqm and mixing ratio of hardener and base is 95:05 and consisting of a coat of two component epoxy primer in ratio of 1:1 (one part of resin and one parts of hardner) at a consumption of 0.200kg/sqm The vital physical and chemical parameters shall be as under : Min Elongation at break of 500% as per ASTM D2370 and tensile strength of 3.0 N/mm2 as per ASTM D2370, Crack Bridging ability greater than 3mm as per C1305 ,Water Impermeability on coated concrete @7 bar as per DIN1048,Water vapor permeability 0.72 perms as EN ISO 7783-2 . The material shall be applied with brush and it should be tested according to EN 1504-2 as a coating for surface protection for concrete, complete in all respect as per the direction of Engineer-in-charge. |
| 45 | S & F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed. |
| 46 | S&F 1000 Ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling/ taking out of Old water tank & removing to where directed complete all as specified and as directed. |
| 47 | All as per description of serial item No. above but 2000 Ltrs capacity complete. |
| 48 | S&F in repairs Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms complete all as directed. |
| 49 | M&L for Cleaning of pvc water tank exc 500 ltrs and not exc 1000 ltrs and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, etc |
| 50 | M&L for Cleaning of pvc water tank exc 1000 ltrs and not exc 2000 ltrs and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, etc |
| 51 | S&F, 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed. |
| 52 | S&F, 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed. |
| 53 | S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, all as specified. |
| 54 | S&F in repair single piece Vitreous china any shade cascade floor mounted single piece water closet P/S trap with dual flush cistern for UF soft close slim seat cover, hinges fitting, conversion bend, fixing accessories set complete all as specified and directed. |
| 55 | S&F in repairs Vitreous china full set pedestal type wash basin, white, flat back, size 585x450x220mm including bracket, CP brass waste coupling and waste pipe complete all as directed. Make : Jaquar Cat part No Jaguar FLS-WHT-5801 & 5301/Cera cat part No S2040112 & S2090107 or equivalent in Kajaria/Somany |
| 56 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, and incl 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete, all as specified and directed. |
| 57 | S&F in repairs vitreous china white table top wash hand basin incl brass CP waste coupling 32 mm dia with long screwed shanks and fly nuts, flanged, PVC waste pipe, fixed complete all as specified and as directed. Make- CAT Part No CERA-S2020137/Jaquar-FLS-WHT-5931 or equivalent make of group I. |
| 58 | S&F in repairs Viterous China urinal half stall type white including CP spreader, waster pipe etc. complete all as specified and directed. |
| 59 | Supply and fixed in repair of vitreous china squatting pan 'Orissa pattern' size 580 x 440 mm white with integral foot rest including replacement of 'P' or 'S' CI trap, concrete bedding and making good floor complete all as specified and directed. |
| 60 | S&F in repairs vitreous China wash down water closet pan pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified. |
| 61 | S&F in repair PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia etc complete all as specified and directed. |
| 62 | S&F 15mm bore long body bib tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series |
| 63 | S&F CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series |
| 64 | S&F CP fancy type two way Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series |
| 65 | S&F in repair CP Health faucet telephonic type with CP with 1.5m long flexible pipe. |
| 66 | S&F in repair CP brass overhead shower square fancy type 100x100 mm with extension CP Arm pipes. |
| 67 | S&F in repair brass chromium plated towel ring fixed with screw in wall complete all as specified and directed. |
| 68 | S&F in repair brass chromium plated towel rail, 600mm long. |
| 69 | S&F in repair brass chromium plated towel rack with hooks, 60cm long between flanges complete all as specified and directed. |
| 70 | S&F of tooth brush/paste tumbler holder fixed to walls with chromium plated brass screws. |
| 71 | S & F PVC connection 15 mm size with PTMT nuts of length 600 mm |
| 72 | S&F in repairs brass CP pillar taps 15mm bore with capstan head, screwed down high pressure with orwithout lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe |
| 73 | S&F in repair for bevelled edge looking mirror of any size, selected quality glass with design as approved by GE, frame less and fixed to chromium plated brass screws and studs complete all as specified and directed. |
| 74 | S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long. |
| 75 | S&F in repair Corner glass shelf assembly with bracket complete all as specified and as directed. |
| 76 | S&F in repair toilet paper holder with flap guard fixed to walls with chromium plated brass screws. |
| 77 | S&F in repair soap dish holder fixed to walls with chromium plated brass screws. |
| 78 | S&F in repair soap dispenser fixed to walls with chromium plated brass screws. |
| 79 | S&F CP brass hot & cold single lever basin mixer with 450mm long braided hoses cast copper alloy with centre hole for WHB complete all as directed by Engineer-in-charge. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series |
| 80 | S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flanges in complete all as specified. Make : Jaquar Opal Prime Series/Cera Ruby series/Somany Bellis series |
| 81 | S&F in repairs CP brass hot & cold 15mm dia single lever sink mixer swinging spout (wall mounted model) with connecting legs & wall flanges complete all as specified. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series |
| 82 | S&F in repairs Sink made of stainless steel of grade 304 of approved make 1 mm thick kitchen or laboratory with plugs, coupling, washers and waste pipe including bedding in cement morter on to dwarf wall or including fixing cantilver brackets overall size 405mm x 460mm x 203 mm bowl size 405 mm x354mm x 203mm complete all as directed. |
| 83 | Supply and fixed in repair PVC waste pipe 32 mm dia plain flexible pipe suitable for wash hand basin as direted. |
| 84 | S&F in repair 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in floors or trenches or vertically with walls, complete all as specified and directed by Engineer-in-charge. |
| 85 | S&F in repair 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in floors or trenches or vertically with walls, complete all as specified and directed by Engineer-in-charge. |
| 86 | S&F in repair 110mm dia PVC (SWR) WC connector with lip ring for WC outlet, complete all as specified and directed . |
| 87 | S&F in repairs PVC (SWR) bend 110 mm any radius complete all as specified and directed. |
| 88 | S&F in repairs PVC (SWR) bend 110 mm any radius with access door, complete all as specified and directed. |
| 89 | S&F in repairs PVC (SWR) bend 75mm any radius complete all as specified and directed. |
| 90 | S&F in repairs PVC (SWR) bend 75mm any radius with access door, complete all as specified and directed. |
| 91 | S&F in repairs, PVC (SWR) floor trap of outlet diameter 75mm, plain with grating including jointing with solvent cement , complete all as specified and directed. |
| 92 | S&F in repairs MS drapery 25mm dia rod powdered coated including brackets, finials and necessary fitting complete all as specified and directed by Engr-in-Charge. |
| 93 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.50 Sqm each complete all as specified and directed |
| 94 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed |
| 95 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed |
| 96 | S&F for steel window (box type) factory made with side hung shutters including friction hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. |
| 97 | S&F Steel window (box type) factory made with side hung shutters including friction hinges, steel handles, steel peg stay and all locking arrangement complete without glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. |
| 98 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge |
| 99 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of 'K' value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hOld fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge |
| 100 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture complete as per direction of Engineer-in-Charge |
| 101 | M&L 35mm thick factory made solid WPC (Wood plastic composite) moulded gauged door shutter (single door piece to be used) with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zinc coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacturer instruction complete all as specified and complete all as specified and directed. |
| 102 | S&F Pressed steel frame of 105x60 mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed. |
| 103 | S&F Pressed steel frame of 125 x 60mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed. |
| 104 | S&F 35mm thick flush shutter solid core construciton with block board core and plywood face panels commercial type on both sides complete all as directed. |
| 105 | S&F 35mm thick IInd class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass gauge/(with sash bar) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass or gauge etc size of members of shutters as specified in SSR Part I section 8 clause 8.24(a) completed all as directed. |
| 106 | M&L for 18/19mm thick both side prelaminated coloured WPC board for cup board shutter and frame & fixed at site including dismantling of old boardings complete all as specified and directed. |
| 107 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 108 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 109 | S&F ACP sheet 3 mm thick (aluminium composite panel) fixed with frame (aluminium) to receive glass paneling including accessories complete |
| 110 | S&F Door closer (aluminium extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified. |
| 111 | S&F copper alloys Mortice lock (4 levers), vertical type, size 100 mm complete all as specified and as directed. |
| 112 | S&F cast iron body with SS cover plate concealed floor springs suitable for door shutters 581mm to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 113 | S&F stainless steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks/wooden beads or galvanized wire staplescomplete all as specified and directed |
| 114 | S&F in repairs stainless steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks/wooden beads or galvanized wire staplescomplete all as specified and directed |
| 115 | S&F 4mm thick sheet glass ordinary quality & glazing with oil putty or wooden/metal beads in square area not exc 0.5 Sqm in each pane, complete, all as specified and directed. |
| 116 | S&F 4mm thick frosted sheet glass ordinary quality & glazing with oil putty or wooden/metal beads etc in squares not exc 0.5 Sqm in each pane complete all as directed. |
| 117 | S&F 5.5mm thick plain sheet glass ordinary quality & glazing with oil putty or wooden/metal beads etc in squares not exc 0.5 Sqm in each pane complete all as directed. |
| 118 | Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out and handling removing to store or stacking for reuse |
| 119 | S&F stainless steel butt hinges, 100mm long, medium weight, complete all as specified and directed. |
| 120 | S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed. |
| 121 | S&F 250mm long stainless steel fancy type, sliding door bolt with hasp staple (bolt type) and fixing clips complete all as directed. |
| 122 | S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as directed. |
| 123 | S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed. |
| 124 | S&F 150mm stainless steel fancy type handles, complete all as specified and directed. |
| 125 | S&F 150 mm Brass handles, cast type, polished bright complete all as specified and directed. |
| 126 | S&F 200 mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed |
| 127 | S&F 200 mm long stainless steel fancy type, barrel tower bolts of extruded section complete all as specified and directed |
| 128 | S&F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed |
| 129 | S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed. |
| 130 | S&F 100 mm long Hasp & staple, safety type, Stainless steel with mild steel hinges pin including bolt to hinges plate & fixed with screw, complete all as specified and directed. |
| 131 | S & F Continuous (piano) hinges, 30 mm width mild steel, bright finish or electrogalvanised complete all as specified. |
| 132 | S&F auto closing hinges 35mm of 0 crank(KH001) OR 8 CRANK (kh-002) openable at 110 degree for cabinet shutter complete all as specified. |
| 133 | S&F magnet ball catcher for cup board shutters complete all as specified of approved sample and make. |
| 134 | Taking down door fittings like tower bolts, handles, hinges, sliding bolts and like from doors/windows complete. |
| 135 | S&F in repairs PVC sandwich wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specificationcomplete all as specified and directed. |
| 136 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 137 | M&L for complete removal of exisiting finish/preparing newly plastered surface (with mechanical sander machine) on walls and applying exterior grade water proof putty of min 1 mm thickness to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as speciifed. Make : Asian paints Apex (Ultima)/Berger Paints weather coat Glo/Shalimaar Paints weatherPRO+ or equivalentNote:- Paint to be applied with airless spray machine . |
| 138 | Preparation of Old plastered surfaces of wall and applying one coat of weather proof exterior emulsion paint (1st quality) on walls complete all as directed.Make : Asian paints Apex (Ultima)/Berger Paints weather coat Glo/Shalimaar Paints weatherPRO+ or equivalent |
| 139 | Preparation of Old plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint (1st quality) on walls complete all as directed.Make : Asian paints Apex (Ultima)/Berger Paints weather coat Glo/Shalimaar Paints weatherPRO+ or equivalent |
| 140 | Complete removal of existing treatment from wall/preparing newly plastered walls and applying one coat of wall care putty (1 mm thick) and finished surface even and smooth, complete all as specified and directed. |
| 141 | M&L for preparation of Old decorated/putty surfaces of walls/ceilings by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint complete, all as specified & directed. |
| 142 | M&L for preparation of Old decorated/putty surfaces of walls/ceilings by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulsion distemper (OBD) of approved shade/tint complete, all as specified & directed. |
| 143 | Preparation of Old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 144 | M&L for preparation of Old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 145 | Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 146 | Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed Please Enable Macros to View BoQ information |
