Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-05-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-05-2026 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 mtr depth for foundation, etc. orfor shafts, wells, cesspits,manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth sewage pipe line and manhole etc and getting out in hard/dense soil complete all as specified and as directed. |
| 2 | Returning, filling incl spreading, levelling watering and well ramming in layers n'exc 25cm in soft/loose soil for sewage pipe line manholes sides and cleaning the site all as specified and directed. |
| 3 | Removing excavated material to a distance not exceeding 50m and depositing complete all as specified and as directed. |
| 4 | Material and labour for Pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 of any description complete all as specified and as directed. |
| 5 | Material and labour for RCC M25 as in floor/roof Slab and roof projection Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, beams and columns and in shelves tc completeall as specified and directed . |
| 6 | Material and labour for Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in cement mortar 1:4 as in cover slab including all necessary form work. Exposed surfaces of concrete shall be finished even and smooth without using extra cement complete all as specified and as directed. |
| 7 | Material and labour for Reinforced cement concrete (1:2:4) type B-1using 20mm graded stone aggregate as in slabs and finishing exposed surfaces fair & even complete all as specified and as directed. |
| 8 | Supply only integral water proofing compound. |
| 9 | Cutting chasis pinning in making good to facing where required for concealed water tubing any size and making good with CM 1:3 cutting not exc 10cm girth in brick/stone walls complete all as specified and directed. |
| 10 | Cutting holes in stone wall exc half brick and not exceeding one brick in cement mortar for inserting hold fasts/lugs and making good dismantled portion in cement mortar 1:3 or 1:2:4 type B-1 concrete as required complete all as specified and as directed. |
| 11 | Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, lintels, Chajjas, cantilevers etc all as specified and directed by Engineer-in-Charge. |
| 12 | Material and labour for form work to soffits of suspended slabs such as roof slab floor slab not exc 200mm thick with flat rough finished surface of concrete complete all as specified and as directed. |
| 13 | Taking down chowkhat or frame(wooden/steel) exceeding 1.50 Sqm not exceeding 4.0 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed. |
| 14 | Taking down shutters of any description exceeding 1.0 Sq.m and not exceeding 2.0 Sq.m each complete all as specified and directed. |
| 15 | Material and labour for Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 16 | Supply & Fixing for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction. |
| 17 | Supply & Fixing for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). |
| 18 | Supply & Fixing for 150mm long and 12mm dia stainless steel fasteners with round shape head complete all as specified and directed. |
| 19 | Supply & Fixing for 2nd class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels of with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.. |
| 20 | S&F Factory made 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and directed. |
| 21 | Taking down chowkhat or frame(wooden/steel) not exceeding 1.5 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed. |
| 22 | Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed. |
| 23 | Supply and fixing Factory made Solid PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed. |
| 24 | Supply and fixing of UPVC glazed 3 track -2 panel sliding windows with mesh made of multi chambered Upvc sections with TPE gaskets having isolated drainage and reinforced with Galvanised iron profiles throught out the window, The outer frame having an overall size of 38 x 61mm with reinforcement of 1.2 mm thickness and sash with overall size of 108 x 48 mm with reinforcement of 1.2 mm thickness and sash of overall size 38 x 58 mm fiber mesh reinforced with 1.2 mm of GI Glazing bead for fixing of glass shall be of size 16 mm x 19 and TPV gasket. Windows will be provided with 5 mm thick plain float glass and stainless steel wiremesh, & single point locking system of flush lock. wall thickness of frame & sash shall be 2-2.2 mm complete all as specified and directed. |
| 25 | Supply & Fixing in repairs of Alumnium anodised tubular towel rail 20 mm dia brass D type 60 cm long between flanges complete all as specified and as directed. |
| 26 | Supply & Fixing Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm. & fixed with wooden beads / stainless steel wire stapels to fixing steel/wooden window&doors frame with nuts and bolts complete all as specified and directed. |
| 27 | Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, and fixed complete all as specified and as directed. |
| 28 | Supply and fixing 200 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 29 | Supply and fixing Aluminum handles cast type anodised 150 mm long complete all as specified and as directed. |
| 30 | Supply and fixing 250mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudud sections or cast- aluminum alloy and fixed complete all as specified and as directed. |
| 31 | Supply and fixing in repairs 200 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 32 | Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, fixed in repair to wooden frame/welded to metal frame complete all as specified and as directed. |
| 33 | Supply and fixing Floor in repairs door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete including taking down existing one complete all as specified and directed. |
| 34 | Supply and fixing in repairs aluminum handles cast type anodised 200 mm long complete all as specified and as directed. |
| 35 | Supply and Fixing in repairs 250mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudud sections or cast- aluminum alloy and fixed complete all as specified and as directed. |
| 36 | Supply & Fixing in repairs 250mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 37 | Supply & Fixing for Aluminium body door closer hydraulically regulated,designation No.3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kg and fixed including taking existing one complete all as specified and directed. |
| 38 | Supply and fixing in repairs MS Mortise lock, 4 levers vertical type, size 100 mm and complete all as specified and directed. |
| 39 | Supply & Fixing for butt hinges size 100 extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed C-21 complete all as specified and as directed. |
| 40 | Supply & Fixing for 125mm long Extruded aluminimum alloy handles, fabricated type complete all as specified and as directed. |
| 41 | Supply & Fixing for Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed. |
| 42 | Supply & fixing in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm. & fixed with wooden beads / stainless steel wire stapels to fixing steel window frame with nuts and bolts, welding complete all as specified and directed. |
| 43 | Applying silicon sealent on joints of wall,cill jambs roof etc complete all as specified as directed |
| 44 | Supply and fixing in Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws,included rubber beading complete all as per architectural drawings complete all as specified and directed. |
| 45 | Supply and fixing in powder coated aluminium for shutters of window and ventilator shutters, side hung type without sash bars/sliding type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, star lock, including rubber beading complete all as specified and directed. |
| 46 | Supply & Fixing in aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screwnot less than 50mm and @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alu standard section ( 28mm x 19mm x 2mm thick) around the opening complete all as specified and directed. |
| 47 | Supply & Fixing in repair 4mm dia Galvanised mild steel plain wire fixed and included MS anchor bolt fastner for fixing mosquito wire of dia 10mm and length n less than 15cm complete all as specified and directed. |
| 48 | Supply & Fixing in repair powder coated aluminium curtain rod fancy type (colour as approved) of 20-25mm bore dia including brackets, stops, rollers,wooden block etc. and fixed to wall with steel screws, necessary fittings complete all as specified and as directed . |
| 49 | Material and labour for Steel reinforcement TMT bars 10mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips incl removal of old reinforcement all as specified and directed by Engineer-in-Charge. |
| 50 | Material and labour for Steel reinforcement TMT bars 6mm dia to 8mm dia cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips incl removal of old reinforcement all as specified and directed by Engineer-in-Charge. |
| 51 | Material and labour for TMT bar10mm dia TMT & over deformed & twisted bars cut to length ,bent to shape required incl cranking , bending , hooking, for lintel and binding with MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 52 | Material and labour for TMT bars 8mm dia in stirups cut to length bent to shape required including cranking, hooking ends etc and binding with MS wire not less than 0.9mm dia or securing with clips. complete all as specified and as directed. |
| 53 | Supply & Fixing of mild steel work in framed brackets of angle or tees with web flanges cut to shape, drilled and countersunk of screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc, 10 kg each bracket, and hanging also fastening and fixing complete conforming to Gde Fe 290, Gde E-165 complete all as specified and directed. |
| 54 | Supply & Fixing of purlins, crane gantries, I section beams, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. and hanging also fastening and fixing complete conforming to Fe 410-W (Gde-E- 250)quality-A complete all as specified and directed. |
| 55 | Supply & Fixing for steel work in tublar truss including special shaped washer etc complete using ERW or induction butt welded tubes confirming o IS 1161-1998 grade St 240 complete all as specified and directed. |
| 56 | Material and labour for 0.50mm thick Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl Dismantling of corrugated AC/fibre/GI sheet of any pattern in roof including ridge complete all as specified and directed. |
| 57 | Supply and fixing in repair 12mm thick Veneered particle board, solid core, exterior grade, with decorative face veneers for both faces, lamination, including side beading fixed with screws complete all as specified and directed. |
| 58 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and removing debris and depositing complete all as specified and as directed. |
| 59 | Material and labour for 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as wearing coat for laying floor finishes, finished fair to receive tiles complete all as specified and as directed. |
| 60 | Material and labour for Coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4) complete all as specified and directed. |
| 61 | Material and labour for Vitrified Ceramic tiles double charged 8-10 mm thick, (square/ rectangular) coloured polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer, 15 mm thick in Cement Mortar (1:6) complete including dismantling of existing old tiles and disposal to outside MD land complete all as specified and directed. |
| 62 | Material and labour for Vitrified Ceramic tiles double charged 8-10 mm thick, (square/ rectangular) coloured polished, area of each tiles not exceeding 0.36 sqm, in vertcal surfaces such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in coloured / white cement to match the tiles inc rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat including dismantling of existing old tiles and disposal to outside MD land complete all as specified and directed. |
| 63 | Material and labour for Glazed coloured Ceramic tiles of size 300mm X 600mm and 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in vertical surfaces over 10 mm thick rendering in cement mortar 1:4 finished including dismantling of existing tile and disposal to outside MD land complete all as specified and directed. |
| 64 | Material and labour for Granite (of any type) tiles / slab 16-18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed 20mm thick in CM 1:4 complete all as specified and as directed. |
| 65 | Material and labour for Granite16-18mm thick (table rubbed and polished) in steps,Jamps, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 20mm thick for laying floor finishes in cement mortar (1:4)complete all as specified and directed. |
| 66 | Rounding to edges of stone slabs one edge / nosing such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 67 | Material and labour for Machine cut kota stone slab 18-20 mm thick as in flooring, laid over and incl 20 mm thick screed bed in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and as directed. |
| 68 | Material and labour for Machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over including 15 mm thick rendering in cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 69 | Material and labour for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone agg) as in Hard standing etc. with , spike rolling ,or making impression of expanded metal, while the concrete is green including complete all as specified and directed. |
| 70 | Material and labour for 75 mm thick PCC (1:4:8) type D2 using 40mm graded aggregate as in sub base of floor finished even and rough to receive top layer and complete all as specified and as directed. |
| 71 | Material and labour for 75mm thick Plain cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate), as in plinth protection courses, top surface of concrete finished even and smooth with out using extra cement, complete all as specified and directed |
| 72 | Material and labour for 300mmx300mmx25mm thick pre-polished cement concrete chequered tile jointed in neat cement slurry and pointed in white or coloured cement to match the floor as per 15 1237-1980 (Reaffaired in 2006) design as type (samples approved by Engr-in-Charge) over and including 20mm thick screed bed in CM 1:6 including demolition existing complete all as specified and directed. |
| 73 | Raking out joints / pointing to squared rubble masonry coursed or uncoursed built in cement mortar or cement lime mortar complete all as specified and as directed. |
| 74 | Taking down cement plaster on brick or stone walls etc, incl raking out joints, hacking for key,scrubbing down with water complete all as specified and directed. |
| 75 | Material and labour for cement plaster rendering 10mm thick in CM 1:6 on fair faces of brickwork or concrete surface as on wall finished even and smooth complete all as specified and directed. |
| 76 | Material and labour for cement plaster rendering 15mm thick on fair faces of stone masonry/brick/concrete surfaces with two coats i.e. (10mm thick backing coat in CM 1:6 and 5mm thick finishing coat in CM 1:4) and mixed with WPC 2%, finished even and smooth without using extra cement (WPC to be measured and paid separately) complete all as specified and directed. |
| 77 | Material and labour for 5 mm thick rendering on fair faces of concrete surfaces on ceiling in CM 1:3 and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 78 | Keyed pointing on squared rubble masonry coursed or uncoursed (Bangalore Pattern) in cement mortar 1:4 complete all as specified and as directed. |
| 79 | Material and labour for preparation of new plastered surfaces of walls applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two finishing coat of oil bound distemper over a coat of primer. |
| 80 | Material and labour for Preparation of newly plastered surfaces of walls and applying two coats cement base paint on walls over a coat of alkali resistant primer of any description as specified and directed. |
| 81 | Material and labour for preparation of new plastered or unplastered surfaces of ceilings including cornices, etc and applying three finishing coat of white wash complete all as specified and directed. |
| 82 | Complete removal of existing treatment of walls and washing, rubbing down, applying 1mm thickness wall care putty and stopping of painted surfaces and two coats of oil bond distemper over a coat of primer complete all as specified and directed. |
| 83 | Material and labour for Preparation of old plastered or unplastered surface of ceiling and walls brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of white wash complete all as specified and directed. |
| 84 | Complete removal of existing treatment by scrapping to make the surface free from dust ,loose paint etc by skilled labour and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old Wall surfaces etc by skilled labour as per manufacturer instructions complete all as specified and directed. |
| 85 | Material and labour for Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of cement based paint complete all as specified and as directed. |
| 86 | Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying one coat of white wash on walls and complete all as specified and as directed. |
| 87 | Supply & Fixing for 5.50 mm thick sheet glass ordinary quality and glazing complete in square not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 88 | Supply & Fixing frosted glass 4.0mm thick, pin head type not exceeding 0.5 sq.m in each pane and fixed. complete all as specified and directed. |
| 89 | Supply & Fixing 4 mm thick sheet glass ordinary quality and glazing complete in square not exceeding 0.50sqm each complete all as specified and directed. |
| 90 | Supply and fixing 4 mm thick sheet glass ordinary quality and glazing complete in square exceeding 0.50sqm each complete all as specified and directed. |
| 91 | Supply and fixing in repairs of frosted glass 4.0mm thick, pin head type not exceeding 0.5 sq.m in each pane and fixed. complete all as specified and directed. |
| 92 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exceeding 3 Sqcm and glass not exceeding 0.5 sqm each pane complete all as specified and directed. |
| 93 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exceeding 3 Sqcm and glass exceeding 0.5 sqm each pane complete all as specified and directed. |
| 94 | Material and labour for preparation of old painted wooden surfaces of any description, not otherwise described, exceeding 10cm in width or girth and applying one finishing coat of synthetic enamel paint on wooden surfaces, complete all as specified and directed. |
| 95 | Material and labour for preparation of old painted steel and iron surfaces of any description exceeding 10 cm in width or girth and applying one finishing coat of synthetic enamel paint on steel surfaces complete all as specified and directed. |
| 96 | Material and labour for Preparation of new steel surfaces of any description exc 10 cm width or girth and applying Two coats of synthetic enamel paint over a coat of redoxide primer on new steel surfaces complete all as specified and as directed. |
| 97 | Preparation of new wood or wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 98 | Supply & Fixing in repair Bib taps chromium plated 15 mm fancy type with capstian head handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 99 | Supply & Fixing in repairs 15mm bore stop/angle valves chromium plated cast copper screwed down high pressure fancy type screwed both ends for pipe or union complete all as specified and directed. |
| 100 | Supply & Fixing in repairs 15mm bore Push cock chromium plated cast copper screwed down high pressure fancy type screwed both ends for pipe or union complete all as specified and directed. |
| 101 | Supply & Fixing in repairs 15 mm bore stop valves fancy type chromium plated with long shank and cup (concealed type ) screwed for iron pipe complete all as specified and as directed. |
| 102 | Supply & Fixing in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 103 | Supply & Fixing in repair fancy type brass chromium plated shower rose 125 mm dia size with arm complete all as specified and directed. |
| 104 | Supply and fix in repairs viterous china squatting pan Orrisa pattern size 580 x 440 mm white with \\"P\\" and \\"S\\" trap front or back inlet etc including provision of PCC (1:5:10) concrete complete all as specified and as directed |
| 105 | Supply & Fixing in repairs 15mm bore CP 2 way bib cock with wall flange fancy type screwed down screwed for iron pipe in repairs complete all as specified and as directed. |
| 106 | Supply & Fixing of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including taking down existing one complete all as specified and as directed. |
| 107 | Supply & Fixing in repairs vitreous china wash down water closet (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steel chromium plated or aluminium hinging device and connecting to 'P' or 'S' trap incl connecting flush pipe with flushing rim complete all as specified and as directed. |
| 108 | Supply & Fixing in repairs 15 mm bore Pillar taps, cast copper alloy, with capstian heads, chromium plated, screwed down high pressure, screwed for iron pipe complete all as specified and directed. |
| 109 | Supply & Fixing in repairs, 10litre capacity PVC flushing tank, syphonic action type, flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipe complete., making proper fixing and hanging arrangements complete all as specified and directed. |
| 110 | Supply & Fixing of 125/150 mm dia round/square grating of CP with or without hole including Jointing to PVC pipe complete all as specified and directed. |
| 111 | Supply & Fixing in repair Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed. |
| 112 | Supply & Fixing in repair Chromium plated soap dish of size 125mmx 95mm of Make : Prayag cat Part No. CPA-42 or equivalent in manufacturers given in List of manufacturers here in after including fixing arrangement complete all as specified and directed . |
| 113 | Supply & Fixing in repairs 40 mm Waste coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 114 | Supply & Fixing of 32 in repairs mm Waste Coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed. |
| 115 | Supply & Fixing in repairs PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 116 | Supply & Fixing in repair PVC waste pipe 32 to 40 mm dia and length n exc 1m for WHB/Sink/Urinal up to floor trap and fixed complete all as specified and directed. |
| 117 | Supply & Fixing in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed. |
| 118 | Supply & Fixing in repairs 75/110 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed. |
| 119 | Supply and fix in repairs vitreous China urinals, Half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. |
| 120 | Supply & Fixing Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum wt 60 gms) complete all as specified and directed. |
| 121 | Taking up or down 15/20/25mm bore of GI pipe steel tubing/CPVC pipes and connections,complete all as specified and directed. |
| 122 | Taking up or down 32/40/50mm bore of GI pipe steel tubing/CPVC pipes and connections,complete all as specified and directed. |
| 123 | M&L for 15mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors complete all as specified and directed. |
| 124 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 125 | Supplying and fixing of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC) complete all as specified and directed. |
| 126 | Supplying and fixing of 20mm outer dia CPVC brass elbow complete all as specified and directed. |
| 127 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 128 | Supplying and fixing of 25mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC complete all as specified and directed. |
| 129 | Supplying and fixing of 25mm outer dia CPVC brass elbow all as specified. |
| 130 | Material & Labour for 25 mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls/ ceiling or laid in floors complete all as specified and directed. |
| 131 | Material & Labour for 40mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls/ceiling or laid in floors complete all as specified and directed. |
| 132 | Supply & Fixing of Rotational moulded Polyethylene water storage tank - 2000 liters capacity (three layer white colour) cylinderica / vertical with closed top including 3 Nos GI check nuts and tank nipple of 25/40mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including dismantling taking down of old unserviceable tank complete all as specified and directed. |
| 133 | Supply & Fixing of Rotational moulded polythene water storage tank of 1000 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25/40mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including dismantling taking down of old unserviceable tank complete all as specified and directed. |
| 134 | Supply and fixing in repairs 25mm dia gun metal gate valve with iron wheel screwed both ends for iron pipe complete all as specified and directed. |
| 135 | Supply & Fixing in repairs 40 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe complete all as specified and directed. . |
| 136 | Demolition and breaking up 100/75mm dia drain pipes and fittings (Salt glazed ware, AC, PVC or cement) set in cement mortar all as specified and directed. |
| 137 | Supply and fix in repairs 110mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed. |
| 138 | Supply and fix in repairs 75mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed. |
| 139 | Supply & Fixing of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches bore of pipe 150 mm with PVC clamps and saddles including taking down and dismantling of old unserviceable cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and as directed |
| 140 | Supply & Fixing in repairs 150mm bore PVC (SWR) bends with access door for pipe 150 mm dia complete all as specified and as directed. |
| 141 | Supply and fix of 110mm dia PVC bend complete all as specified and as directed. |
| 142 | Supply and fix of 75 mm dia PVC bend complete all as specified and as directed. |
| 143 | Supply & Fixing of 75 mm dia PVC (SWR) bends with access door bore of pipe 75 mm complete all as specified and directed. |
| 144 | Supply & Fixing of 110 mm dia PVC (SWR) bends with access door bore of pipe 110 mm complete all as specified and directed. |
| 145 | Supply & Fixing of 110 mm dia PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and directed. |
| 146 | Supply & Fixing of 75 mm dia PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75mm complete all as specified and directed. |
| 147 | Supply & Fixing of PVC (SWR) branch piece, single(single Y) equal or unequal with access door bore of pipe 75mm complete all as specified and directed. |
| 148 | Supply & Fixing of PVC (SWR) branch piece, single (single Y) equal or unequal with access door bore of pipe 110mm complete all as specified and directed. |
| 149 | Supply & Fixing of PVC (SWR) branch piece, double (double Y) equal or unequal with access door bore of pipe 110mm complete all as specified and directed. |
| 150 | Supply & Fixing of PVC (SWR) WC connector bent pipe/reducers 110 mm complete all as specified and directed. |
| 151 | Supply & Fixing of PVC (SWR) Vent cowl 110mm complete all as specified and directed. |
| 152 | M&L reinforced concrete pipes 200mm bore, class NP2, laid and jointed complete with collars complete all as specified and as directed. |
| 153 | M&L for cement concrete 1:4:8 type D2 in bed to pipe incl forming cradles 150mm internal dia after the pipes are laid jointed and tested complete complete all as specified and as directed. |
| 154 | Treatment of the sunken floor slab comprises of the following specification (a) Demolition of cement concrete filling of any description in sunken portion in toilet and removing debris outside MD land.(b) Cleaning the sunken/ lowered portion of RCC slab surfaces (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout (WPC shall be measured and paid separately)(c) Rendering of uneven surfaces with 10mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/ seepage is noticed, nozzles shall be fixed and grouting carried out. (WPC shall be measured and paid separately). (d) All junctions points of side wall spout where CI/ GI pipes are passing through shall be sealed with epoxy putty.(e) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. |
| 155 | Treatment of the sunken floor slab comprises of the following specification (a) Demolition of cement concrete filling of any description in sunken portion in toilet and removing debris outside MD land.(b) Cleaning the sunken/ lowered portion of RCC slab surfaces (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout (WPC shall be measured and paid separately)(c) Rendering of uneven surfaces with 10mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/ seepage is noticed, nozzles shall be fixed and grouting carried out. (WPC shall be measured and paid separately). (d) All junctions points of side wall spout where CI/ GI pipes are passing through shall be sealed with epoxy putty.(e) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
