|
| 1 | PART - A (CIVIL WORKS)Clearing jungle including uprooting of rank vegetation, grass, bush etc., and removal of rubbish and disposing outside the periphery of the work area. complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 2 | PART - A (CIVIL WORKS)Cutting and felling of trees of girth(measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material inside project campus within the boundary at places shown etc. complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 3 | Girth from 300 mm to 600 mm |
| 4 | Girth from 600 mm to 900 mm |
| 5 | Girth from 900 mm to 1800 mm |
| 6 | Girth above 1800 mm |
| 7 | PART - A (CIVIL WORKS)Earth work excavation for Foundation by mechanical means for all works & depth as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 2km and at required lead and lift including Cost of labour, tools, usage of machinery & other appurtenaces required to complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 8 | Depth upto 3 m |
| 9 | Depth exceeding 3m, but not exceeding 6 m |
| 10 | PART - A (CIVIL WORKS)Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water as per the recommendation of manufacturer labour, usage charges of machinery,complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 11 | PART - A (CIVIL WORKS)Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 50cm in depth, consolidating each deposited layer by ramming and watering, at all lead and lifts. complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 12 | PART - A (CIVIL WORKS)Filling approved earth From borrow pit(excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 50cm in depth, consolidating each deposited layer by ramming and watering, at all lead and lifts. complete as per specification and as directed by Engineer-in-Charge. |
| 13 | PART - A (CIVIL WORKS)Providing and laying Rubble Stone Soling using hard granite stones below floor, for consolidated thickness of 300 mm with stones vertically hand set, interstices packed with smaller stone chips, binding with murrum, watering, consolidating and finish to level etc. complete as per specifications and as directed by Engineer-in-Charge. |
| 14 | PART - A (CIVIL WORKS)Providing and laying in position Cement Concrete(.Mix 1:3:6 Using 20 mm and down size graded crushed coarse aggregates) for levelling course for all works in foundation. Or any otherThe granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications , drawing and direction of engineer in charge. |
| 15 | PART - A (CIVIL WORKS)Providing and laying in position Cement Concrete grade of approved design mix using 20 mm nominal size graded crushed coarse aggregates for all Foundation works including plinth. The crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications , drawing and direction of engineer in charge. |
| 16 | M30 Design Mix using 20 mm nominal size |
| 17 | M35 Design Mix using 20 mm nominal size |
| 18 | M40 Design Mix using 20 mm nominal size |
| 19 | PART - A (CIVIL WORKS)Providing formwork for Foundations, footings, bases of columns, lift pits,plinth beams etc. for work upto plinth level including removal,staging,cleaning etc complete as per technical specification and as directed by Engineer-in-Charge. |
| 20 | PART - A (CIVIL WORKS)Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement for foundation work,columns,lift walls and for all other works sub structure including plinth beam including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire of 1.6mm dia,cover blocks of equivalent grade and other ancilary operations complete as per drawing and technical specification and as directed by Engineer-in-Charge. |
| 21 | PART - A (CIVIL WORKS)Providing Solid Cement Concrete Block having strength 5Mpa & above and water absorption not more than 10 percent according to IS 2185 PART 1 below plinth level in all shapes and sizes with Cement mortar 1:5 (1 cement : 5 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machineries & other incidental charges complete as per the drawing technical specification and direction of engineer incharge of work. |
| 22 | PART - A (CIVIL WORKS)Providing and laying in position Reinforced Cement Concrete for all Super structure work of building. The crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications, drawing and direction of engineer incharge. |
| 23 | M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates |
| 24 | M35Design Mix Using 20 mm nominal size graded crushed coarse aggregates |
| 25 | M40 Design Mix Using 20 mm nominal size graded crushed coarse aggregates |
| 26 | PART - A (CIVIL WORKS)Providing centering and shuttering for all RCC works of beams, slab,column,lintels,staircase,roofs,balconies etc for super structure [excluding plinth beam] works including removal of the same for in-situ reinforced concrete using approved formwork including sturting propping etc at all levels, heights & floors and removal of the same for in-situ reinforced concrete. Complete as per specifications, relevant IS and as directed by Engineer-in-Charge. |
| 27 | PART - A (CIVIL WORKS)Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement for super structure work [ excluding plinth beam] like columns,beams,slabs,roofs,staircase,lintel beam,landings etc., including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire of dia 1.6 mm , cover blocks of equivalent grade and other ancilary operations complete as per drawing and technical specification and as directed by Engineer. |
| 28 | PART - A (CIVIL WORKS)Providing Solid Cement Concrete Block having strength 5Mpa & above and water absorption not more than 10 percent or according to IS 2185 PART 1 for superstructure above plinth level in all shapes and sizes with Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machineries & other incidental charges complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 29 | PART - A (CIVIL WORKS)Providing 15 mm cement internal plaster in two coats on masonry work for walls, internal passage,staircase,litf walls etc for all internal works of building of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 30 | PART - A (CIVIL WORKS)Providing 18 mm external cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) to brick masonry including adding of water proofing compound as per the manufacturer recommendation, rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 31 | PART - A (CIVIL WORKS)Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof including cost of material, labour, scaffolding etc ascomplete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 32 | PART - A (CIVIL WORKS)Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 33 | PART - A (CIVIL WORKS)Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services,junction between RCC and brick walls including cost of materials, labour for fixingcomplete in all respect as per drawing,specifications and direction of Engineer in Charge (Length of mesh only be measured for payment) |
| 34 | PART - A (CIVIL WORKS)Providing and rendering smooth finish; using Birla White Putty in One Coat to have even finish over internal plastered surfaces of wall; concrete & ceiling including rubbed perfectly so as to obtain smooth & even finish, providing; fixing & removing necessary staging / platform, preparation of base properly by cleaning & washing, Base shall be fully neat, clean & dry before application of putty, cleaning the work area & disposing the debris / waste materials / unwanted materials / things etc., upto a lead of 2000 meters outside the pheriphery of work premises etc. complete all as per specification and as directed by the Engineer-in-charge at all locations and at all lifts / heights. |
| 35 | PART - A (CIVIL WORKS)PART - A (CIVIL WORKS)Providing and laying Double charged vitrified floor tiles with thickness 9-10 mm size of Tile 600x600 mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 36 | Flooring |
| 37 | Skirting |
| 38 | PART - A (CIVIL WORKS)Providing and laying Double charged vitrified tiles Matt Finish with thickness 9-10 mm, 600 x 600 mm size with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting.complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 39 | Flooring |
| 40 | Skirting |
| 41 | PART - A (CIVIL WORKS)Providing and laying Polished Glazed Vitrified tiles with thickness 8-10 mm on walls of kitchen/bathroom or wherever required of sizes 600 x 1200 mm with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477 / epoxy based adhesive, in average 6 mm thickness, including grouting of joints complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 42 | PART - A (CIVIL WORKS)Providing and laying 20mm thick Kota stone for flooring and skirting using machine cut slabs in single piece or as directed over a bed of 12mm thick in cement mortar 1:3, close jointed and pointed with matching pigmented cement slurry including rounding off the nosing, curing , polishing etc. complete all as per specification, as per drawing and as directed by engineer-in-charge at all floors and heights. |
| 43 | PART - A (CIVIL WORKS)Providing and laying Vitrified tiles for risers,treads of staircase with thickness 12mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622,of approved brand & manufacturer, in all colours and shade, in skirting,riser, treads of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints as complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 44 | PART - A (CIVIL WORKS)Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, nosing, curing edge moulding to 18mm thick Granite stone counters, vanities etc. Including machine polishing to edge to give high gloss finish etc. complete in all respect as per drawing,specifications and direction of Engineer in Charge NOTE:-Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. |
| 45 | PART - A (CIVIL WORKS)Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 46 | PART - A (CIVIL WORKS)Providing and laying 20 to 25 mm thick polished Cuddappa Slabs of approved colour & shade for Kitchen Store ,wardrobe & Below Platform using machine cut pre-polished on one face, slabs in single piece or as directed laid over 20mm thick cement morter 1:6, close jointed and pointed with matching pigmented cement slurry finished to levels, slope as required & curing, rubbing, nosing rounded off etc. complete as per specifications drawing and as directed by the Engineer in-charge. |
| 47 | PART - A (CIVIL WORKS)Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1,including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.complete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 48 | PART - A (CIVIL WORKS)Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curingcomplete in all respect as per drawing,specifications and direction of Engineer in Charge |
| 49 | PART - A (CIVIL WORKS)Providing, Fabricating & erection of all structural steel work for purlins, rafters, horizontal / vertical / cross members, columns, beams, trusses, window grills with fasterning, gates, rollers etc. and all other fabrication works including providing standard MS Steel Sections which are required for executing the work as directed by engineer and fixing / erecting with site welding the same in position to true line, level & plumb along with preparation of base, providing & painting One Coat of approved Zinc Phospate Primer / Red Oxide Primer of 1st quality & of standard make and two coats of first quality synthetic enamel paint, of standard make, of shade / colour [as per site requirement & as selected by engineer-in-charge], all including and providing, fixing, & removing necessary staging / platform wherever required, cleaning the work area, disposing of waste materials / debris etc. outside the periphery of work premises, at all locations & lifts /heights etc. complete in all respect as per drawing,specifications and direction of Engineer in Charge Note: All materials shall be conforming to relevant BIS specification of latest edition. Please Enable Macros to View BoQ information |
| 50 | PART - A (CIVIL WORKS)Providing, Fabricating & erection of all structural steel work for purlins, rafters, horizontal / vertical / cross members, columns, beams, trusses, window grills with fasterning, gates, rollers etc. and all other fabrication works including providing standard MS Steel Sections which are required for executing the work as directed by engineer and fixing / erecting with site welding the same in position to true line, level & plumb along with preparation of base, providing & painting One Coat of approved Zinc Phospate Primer / Red Oxide Primer of 1st quality & of standard make and two coats of first quality synthetic enamel paint, of standard make, of shade / colour [as per site requirement & as selected by engineer-in-charge], all including and providing, fixing, & removing necessary staging / platform wherever required, cleaning the work area, disposing of waste materials / debris etc. outside the periphery of work premises, at all locations & lifts /heights etc. complete in all respect as per drawing,specifications and direction of Engineer in Charge Note: All materials shall be conforming to relevant BIS specification of latest edition. Please Enable Macros to View BoQ information |
