|
| 1 | SITC of 4.5 mm thick M.S traffic post with outer dia. 114.3mm, medium class and confirming to IS:1239 (P-1) 6 Mtr. Long (0.8 Mtr. Below ground level) suitable for mounting the signal head assembly with weather proof fiber cap and M.S base plate 300 mm x 6 mm including excavation of pit and grounding with P.C.C of ratio 1:3:6 from bottom of the pole and up to 30 cm above the ground level and 40 cm dia. Including painting with rubber paint below ground level and red oxide on exposed surface and finishing with traffic yellow enamel paint two coats complete as required. |
| 2 | P/Laying P.V.C/XLPEE insulated & P.V.C sheathed cable of 1.1 KV grade with Copper conductor of IS: 1554 P-I/IS: 7098 P-I of Group 1 of approved make in ground as per IS: 1255 including excavation of 30cm x 75cm size trench, 25cm thick under layer of sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 2.5sq mm. Armored 4 core |
| 3 | SITC of Cutting back up surface up to 2 Mtr. Depth by digging by Bogie including all layers of crust for laying pipe line etc. and making good to original condition (excluding cost bitumen) |
| 4 | S.I.T.C. of following colour retrofit LED matrices traffic light of modular size 300 mm dia, Covered with front clear acrylic sheet and back with aluminum body, InP/InGaN based 5mm dia. Coloured LEDs of ultra bright. Super intensity (visible clearly at day time up to distance 300-600 meter, viewing angle of 30 degree). The unit shall be suitable for working on A.C. supply (160-240 V) and life cycle approx. 10 yrs with power consumption below 24 watts, suitable for fast switching. Red/Amber Round (unit of 200-220 Nos LEDs) |
| 5 | Green Arrow (Unit of 120-130 Nos LEDs) |
| 6 | Add extra for SITC of M.S. housing for LED matrices |
| 7 | S.I.T.C. of programmable three digit digital count down timer with 5mm dia. Red colored LEDs of high intensity (visible clearly at day time) of reputed make with digit size 150mm x 300mm approx. and quantity of LEDs be approx. 800 no.s including interconnection with traffic signal controller and housing the LED assembly in sheet metal box of size approx. 750mm x 550mm with detachable pole arms clamps etc. as required or 2 in 1 New updated version digital count down timer with 5mm dia. Red & Green colored LEDs of high intensity. |
| 8 | SITC or microprocessor based UTCS type automatic electronic controller conforming to IS: 7537for traffic signals complete with electronic timer, G.P.S. based control board, blinker unit for night operation and slip lane, day time peak hour’s operation. Compatible with new LED Retrofit system and trigger unit. ATCS connectivity features. The controller shall have 32 signal phases, 25 Signal Plan,24 Cycle Plan, 32 Signal Split Plan, 32 Cycle conditions, 32 signal line, solid state relay switching R.S 485 communication and 4 hurry call inter phase, manual override facility up gradable vehicle actuated system, also have method of traffic control with fixed time isolated intersection and cable less/cabled interlinking for synchronized operation. The unit shall be totally enclosed in 2.00mm thick metal sheet box size 99 cm x 61.5 cm x35.5 cm including making connection. Labour Only |
| 9 | Supply & Fixing of Spare cards for UTCS microprocessor controller Microprocessor C.P.U Card |
| 10 | Microprocessor Lamp Driver Card |
| 11 | Microprocessor mother board Card-Bottom |
| 12 | Microprocessor mother board Card-Top |
| 13 | SITC of SMPS input 100-250 V 1.6A AC 50/60 Hz or DC 120-300V 1Amp output + 5V/8V +12V/0.7A-12V/0.7 Amp Maximum output power 40V connection cooling 55 Watt with 30CFM forced Air LPT 43 Model |
| 14 | Painting of exiting traffic post/ cantilever pole/ signal head assembly/ controller box including removing of old rusted surface and applying red oxide finishing two coats of enamel paints as required. Traffic post |
| 15 | Cantilever pole |
| 16 | Controller box |
| 17 | Signal head assembly 300mm dia. |
| 18 | P / L of Double wall corrugated HDPE pipe confirming to IS : 16205 P-24, Stiffness Class 750 N, Externally corrugated and having smooth surface inside with HDPE Coupler, Elbow, Tee at required Depth below the ground for laying cable of following Nominal Outer dia. MFR Test report from NABL accrediated is to be submitted.(Excavation of Earth & Back filling with compaction is to be Paid Extra)All as per pre approved by Engineer in-charge.90mm |
| 19 | P &F in position frame made out of M.S. angle (riveted or welded) finished with two coat of red oxide and enamel paint including cutting, welding, holes etc. of following sizes as required. 40mm X 40mm X 5mm |
| 20 | Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty Copper lugs duly crimped with crimping tool, PVC tape etc. for following size of armored PVC insulated & PVC sheathed/ XLPE aluminum conductor cable of 1100 Volt grade as required of size. 4 X 2.5 sq.mm. |
| 21 | SITC or microprocessor based UTCS type automatic electronic controller conforming to IS: 7537for traffic signals complete with electronic timer, G.P.S. based control board, blinker unit for night operation and slip lane, day time peak hour’s operation. Compatible with new LED Retrofit system and trigger unit. ATCS connectivity features. The controller shall have 32 signal phases, 25 Signal Plan,24 Cycle Plan, 32 Signal Split Plan, 32 Cycle conditions, 32 signal line, solid state relay switching R.S 485 communication and 4 hurry call inter phase, manual override facility up gradable vehicle actuated system, also have method of traffic control with fixed time isolated intersection and cable less/cabled interlinking for synchronized operation. The unit shall be totally enclosed in 2.00mm thick metal sheet box size 99 cm x 61.5 cm x35.5 cm including making connection (C-DAC make). Please Enable Macros to View BoQ information |
