Tender For Special Reapair To Sho Building (P-45) At Old Navy Nagar Under Ge (Nw) Navy Nagar Colaba, Mumbai, Mumbai-Maharashtra

TDR : 55226894

Tender Notice
Corrigendum Details
BOQ

Expired

Mumbai , Maharashtra

Tender Brief : Corrigendum : Tender For Special Reapair To Sho Building (P-45) At Old Navy Nagar Under Ge (Nw) Navy Nagar Colaba, Mumbai

Document Fees
₹ 1000 /-

EMD
₹ 160750.0 /-

Tender Value
₹ 90.50 Lakhs /-

Submission Date
01-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	25-05-2026	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	01-06-2026
2	15-05-2026	DATE	Date	25-05-2026
3	15-05-2026	corrigendum	BOQ	25-05-2026

Name of Work:- SPECIAL REAPAIR TO SHO BUILDING (P-45) AT OLD NAVY NAGAR UNDER GE (NW) NAVY NAGAR COLABA, MUMBAI

Sl. No.	Item Description
1	Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER (NAVAL WORKS) MUMBAI Name of Work : SPECIAL REAPAIR TO SHO BUILDING (P-45) AT OLD NAVY NAGAR UNDER GE (NW) NAVY NAGAR COLABA, MUMBAI Contract No: 8290/CWE (NW) MUMBAI/E8 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2	PART \\"A\\" B/R WORKS Relieving structural members such as columns, beams and slabs of superimposed loads either partially or fully by providing adjustable steel props, staging, frames, timber runners, bracing and jacking arrangements, complete, ensuring stability of structure during execution, all as specified and directed by the Engineer-in-Charge. Removal and reinstatement of brickwork, if required, shall be measured and paid separately.
3	Material & Labour for chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure and cleaning and disposal of debris out side the MoD land etc complete as directed by Engr-in-charge. Hard concrete should not be removed by force complete all as specified and directed by Engr-In- Charge.
4	Material and labour for cleaning of exposed reinforcement by approved rust remover, followed by application of anti-corrosive protective coating to reinforcement steel as per manufacturer’s specifications, complete all as specified and directed by the Engineer-in-Charge.
5	Material and labour for providing and applying one coat of polymer bonding agent of approved make on prepared concrete surfaces of slabs, beams, columns and other structural members to ensure proper bond between old and new concrete/mortar, complete all as specified and directed by the Engineer-in-Charge.
6	Material and labour for providing SBR latex modified cement mortar of thickness 25 ± 5 mm on prepared surfaces, including mixing, application, finishing and curing, complete all as specified and directed by the Engineer-in-Charge. The rate shall include necessary scaffolding and no extra payment shall be made on this account.
7	Rebuilding/repair of damaged RCC members by providing and placing micro-concrete of grade not less than M-40, in layers to achieve required thickness (average 50 to 70 mm), including formwork/shuttering, surface preparation, mixing, placing, compaction, curing, removal of formwork and finishing the surface to match existing, including all leads and lifts, complete all as specified and directed by the Engineer-in-Charge.
8	Materials and labour for formwork (use and waste of timber) to sides of pillars, posts, struts, piers, columns and stanchions of square, rectangular or polygonal shape on plan, for rough finished surfaces of concrete, complete all as specified and directed
9	Providing and fixing MS/TMT dowel bars, staple bars or shear connectors of required diameter and length, including drilling holes in concrete using rotary drill of suitable size and depth, cleaning of holes by air blower, fixing of bars with approved polyester/epoxy resin based anchoring grout, complete with all labour, materials, tools and accessories, ensuring proper alignment and bond, complete all as specified and directed by the Engineer-in-Charge.
10	Material and labour for application of water-based wax emulsion curing compound on concrete surfaces at a coverage of 3 to 5 sqm per litre, applied uniformly after completion of repair work, complete all as specified and directed by the Engineer-in-Charge.
11	Material and labour for providing welded wire mesh not exceeding 4 kg/sqm, size 25 mm × 25 mm, including cutting, fixing, tying with binding wire, nails, beading and fillets as required, including dismantling and removal of old unserviceable mesh, complete all as specified and directed by the Engineer-in-Charge.
12	Drilling Holes of 12mm dia, upto 100mm deep holes in structural members at the intervals of 300 to 500mm in staggered manner or along the crack as directed by the Engr-in-charge in RC structural element including Cleaning of the holes by air blower and Inserting 12mm dia. Teflon nozzles compatible with epoxy injector and having machined external end to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing and allow to cure the system for min.8 hrs before grouting including removing nozzle projections, excess putty if any over concrete element grinding, levelling and finishing the external surface, after completion of the work, etc complete all as specified and directed by Engr-In- Charge. Note : Epoxy putty cost are included . Drilling of hole shall be done by authorized applicator
13	Material & Labour for Grouting Injecting low viscosity high molecular weight thermostat polymer Monopol 250 H by pressure and using pressure epoxy injector with accessories till nozzles refused to accept the grout, Including Mixing material components part a and part b in required quantities as per mfg instruction by weigh batching Filling the grouting gun with monopol 250 H and maintaining desired pressure in the gun, air compressor and at exit (minimum 3 to 4 kg/Cm2) by a mechanism to monitor both pressure gauges and controlling the same by release valves and release the grout as per requirement simultaneously to grout the structural element through prefixed nozzles till its refusal. Seal the nozzle with thixotropic epoxy putty after the refusal. Note : leakages through other nozzles or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost.complete all as specified and directed by Engr-In- Charge.
14	Demolition of reinforced cement concrete, any description, in any position, not otherwise specifically provided for, including cutting through reinforcement as required to facilitate demolition, sorting and stacking serviceable materials, complete all as specified and directed.
15	Materials and labour for TMT(CRS) steel bars, 10mm dia and over, cut to length and bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips, conforming to Fe 410-W (Grade E-250) Quality A, complete all as specified and directed
16	Materials and labour for TMT (CRS) steel bars, 6mm to 8mm dia, cut to length and bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips, conforming to Fe 410-W (Grade E-250) Quality A, complete all as specified and directed.
17	Materials and labour for Formwork (use and waste of timber) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping), for fair finished surfaces of concrete, complete all as specified and directed.
18	Materials and labour for formwork (use and waste of timber) to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide, for rough finished surfaces of concrete, complete all as specified and directed.
19	Demolition of concrete, any description, in any position, not otherwise specifically provided for, including sorting and stacking serviceable materials , complete all as specified and directed.
20	Materials and labour for 75mm thick cement concrete type C-2 (1:3:6) using 40mm graded stone aggregate, as in plinth protection, laid in panels and finished even and smooth on the top surfaces, complete all as specified and directed.
21	Providing and laying cement concrete cast-in-situ, type B-1 (1:2:4) using 20mm graded stone aggregate, as in lintels up to 1.5m clear span, cills, seismic and other similar bands, plinth courses, parapets, copings, bed plates and the like, including weathering, slightly rounded or chamfered angles and throating, complete as specified
22	Materials and labour for treatment to vertical sides of sunken floors, including roughening surfaces of old cement concrete by picking, sweeping clean and washing down with water to remove dust rendering 15 mm thick in cement mortar 1:4 mixed with liquid waterproofing compound , and applying two coats of hot bitumen (blown grade) at the rate of 1.50 kg/sqm per coat , complete all as specified and directed.
23	Materials and labour for cement concrete 1:7:12 type F-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete in sunken floors , complete all as specified and directed. .
24	Supplying and fixing in repairs, vitreous China squatting pan, Orissa pattern, size 580 x 440 mm, white, with integral foot rests, including 'P' or 'S' trap, jointing to flush pipe and soil pipe, and making good to floor, complete all as specified and directed.
25	Supplying and fixing in repairs, vitreous China wash down water closet, pedestal pattern, white, including 'P' or 'S' trap, seat and cover, jointing to flush pipe and soil pipe, and fixing to floor, complete all as specified and directed.
26	Supplying and fixing plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices, complete all as specified and directed.
27	Supplying and fixing unplasticised PVC pipes of pressure rating 10 kgf/cm², including all pipe fittings (elbows, tees, sockets, etc.), fixed complete to walls, ceilings or in floors with saddles (snap clips) or hooks, including cutting through walls/floors and making good, 40 mm bore, complete as specified.
28	Supplying and fixing in repairs, 10 litres capacity, low level, syphonic action type, white plastic flushing cistern conforming to IS 7231, with inlet, ball valve, float and handle, including brackets and 32 mm nominal dia polyethylene flush pipe, complete as specified and directed. Note: The SSR specifies 32 mm dia for low level cistern flush pipes
29	Supplying and fixing in repairs, health faucet (ABS body), chromium plated, suitable for 15 mm dia pipe, with 1.25 metre long flexible tube and ABS wall hook, including making connections and fixing in position, complete all as specified.
30	Supplying and fixing vitreous China urinal, half stall type, white, including automatic flushing cistern with brackets, flush pipe, and grating and union for discharge pipe, complete all as specified and directed.
31	Supplying and fixing PTMT or CP brass urinal spreader, any colour/finish, for fixing with 15 mm dia pipe, complete all as specified and directed.
32	Supplying and fixing in repairs, PVC connectors of 15 mm size with PTMT nuts, 600 mm length, complete all as specified and directed.
33	Supplying and fixing in repairs, PVC connectors of 15 mm size with PTMT nuts, 450 mm length, complete all as specified and directed.
34	Supplying and fixing 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood, fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed.
35	Supplying and fixing Towel Ring of PTMT, any colour, fixed with and including chromium-plated brass screws and wooden or plastic cleats (minimum weight 90 gms), complete all as specified and directed.
36	Supply and fixing in repair vitreous china wash basin, white, flat back type, of size 550 mm × 400 mm × 135 mm or nearest standard size, conforming to relevant IS standards, including 32 mm dia CP brass waste fitting, nickel chromium plated, all necessary brackets, painting of brackets, fixing to wall or counter, sealing the gap between basin and wall/table top with approved silicone sealant, including cutting and making good the disturbed surfaces, and connecting to existing water supply and waste pipes complete all as specified and directed by the Engineer-in-Charge.Make: CERA (Model CALBURT Cat No. S2020137) or equivalent in Jaquar / Hindware / Parryware.
37	Supplying and fixing in repairs, 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type, high pressure, with or without lettered 'HOT' or 'COLD', with long screwed shanks and fly nuts, complete all as specified and directed.
38	Supplying and fixing in repairs, sinks with drainage board, made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and waste couplings, including bedding in cement mortar to dwarf walls or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed.
39	Materials and labour for 32mm dia waste fittings, brass, chromium plated, for wash basins, sinks, etc., with long screwed shanks and fly-nuts, including bedding flange end in red lead cement and fixing in position, complete all as specified and directed.
40	Supplying and fixing PVC connections (waste pipe), 32 mm bore, any length, including necessary jointing and fixing complete, all as specified and directed.
41	Taking down rainwater or waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed
42	Supply & Fixing 110mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.
43	Supply and fixing of pipe supporting clamping system for single down-take pipe of 110 mm dia (4\\"), comprising profile brackets maintaining 75 mm wall clearance, continuous slotted C-channel of suitable size, and U-bolt with rubber sleeve suitable for 110 mm dia CI/PVC pipe, including all necessary fasteners such as zinc-coated anchor fasteners, nuts, bolts and washers, complete with proper alignment and fixing to wall, suitable for vertical installation up to 9 storey height, complete all as specified and directed by the Engineer-in-Charge.NOTE:(a)The rate shall include provision of 2 Nos profile brackets, 1 No slotted C-channel (approx. 250 mm length), 1 No U-bolt with rubber lining, and minimum 4 Nos zinc-coated anchor fasteners (6–8 mm dia, approx. 60–65 mm length) per unit, complete.(b) All work shall be carried out in accordance with Chief Engineer Navy Mumbai Technical Drawing No. TD/2023/01 or latest revision.
44	Supply & Fixing 75 mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 75 mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified.
45	Supplying and fixing PVC (SWR) reducers, 110 mm bore, complete all as specified and directed.
46	Supplying and fixing PVC (SWR) bends, any radius, provided with access (inspection) door, 110 mm bore, complete all as specified and directed
47	Supplying and fixing PVC (SWR) bends, any radius, 110 mm bore, complete all as specified and directed.
48	Supplying and fixing PVC (SWR) branch piece, single (single Y), equal or unequal, 110 mm bore, without access door, complete all as specified and directed.
49	Supplying and fixing PVC (SWR) branch piece, double (double Y), equal or unequal, 110 mm bore, without access door, complete all as specified and directed
50	Supplying and fixing PVC (SWR) vent cowl, 110 mm bore, jointed with solvent cement, complete all as specified and directed.Note: SWR fittings are typically jointed with solvent cement or rubber rings rather than \\"cement joints\\".
51	Supplying and fixing PVC (SWR) floor trap, plain with grating, including jointing with solvent cement, 75 mm outlet pipe, complete all as specified and directed.
52	Supplying and fixing 100 mm Stainless Steel trap grating, bedded in white cement in floor trap, complete all as specified and directed.
53	Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing), including sorting and stacking serviceable tiles and removing rubbish off the premises, complete as specified
54	Materials and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate), as in sub-floors, sub-bases, floors and pavings, complete all as specified and directed.
55	Materials and labour for non-skid ceramic digital tiles, 7 to 8 mm thick, of size 400x400 mm or 300x300 mm (area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm), in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
56	Materials and labour for digital coloured glazed ceramic tiles, size 300 x 450 mm, 7 to 8 mm thick, in vertical surfaces such as skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match, including designed borders (the rate for which is deemed to be included in the item), over and including 10 mm thick rendering (backing) coat on fair faces of brickwork in cement mortar 1:4, complete all as specified and directed.
57	Materials and labour for non-skid rectified ceramic floor tiles, size 600 x 600 mm, 9 to 10 mm thick (area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm), in floors or skirting, of approved colour, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick cement screed bed in cement mortar 1:6, complete all as specified and directed.
58	Materials and labour for glazed coloured vitrified tiles, size 600 x 600 mm, 9 to 10 mm thick (area of each tile not exceeding 0.36 sqm), in floors or skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick cement screed bed in cement mortar 1:4, complete all as specified and directed.
59	Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, including sorting and stacking serviceable materials and complete all as specified
60	Materials and labour for Udaipur green/Baroda green marble slab, 18-20 mm thick, on vertical surfaces (veneering), machine cut, table rubbed and polished, bedded and jointed in white cement (1:2) using marble dust with admixture of pigment to match the shade of marble, over and including 15 mm thick rendering (backing) coat in cement mortar 1:4, including all grinding and polishing, complete all as specified.
61	Materials and labour for Granite (of any type) work, 18 to 20 mm thick, table rubbed and polished, as in steps, jambs, pillars, window-cills, cooking platforms, and the like, laid in cement mortar 1:4, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified
62	Materials and labour for machine-cut pre-polished Kota stone slab flooring, 20-25 mm thick, over and including 15 mm thick cement screed base (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing, complete as specified
63	Rounding to edges of stone slabs (such as Kota or Granite), one edge, as in steps, cooking platforms, and other similar situations, complete as specified.
64	Extra for forming grooves (square, hollowed, or dovetailed) in face work of stone slabs, as in staircase treads or similar situations, complete all as specified
65	Taking down chowkhats or frames (without taking off shutters from the frames), not exceeding 1.50 sqm each, including removal to store or stacking for re-use as directed
66	Supply & fixing in repairs powder coated aluminium sections for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, cleats etc including all accessories such as glazing clips, handles, tower bolts, rollers rubber beadings for fixing glass panes in frame including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specifiedNote: - (i) Glass panes will be measured & paid separately. (ii) The rate quoted shall be inclusive of neoprene beading, glazing clips, screws, etc. as required but shall not be measured for arriving of weight.(iii) Minimum thickness of powder coating shall be 25 micron. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel around contacting surface of aluminium work with matching existing area.(v) The size of aluminium sections shall be as per HQ CE(N) MZ TD drawing No TD/2021/01 to 05 and sill to be provided as per HQ CE(N) MZ TD of sill type 'A' and 'B' respectively if directed.
67	M&L aluminium grill with suitable aluminium anodized frame section of F section of size 23.4x15.3x4 mm thick manufactured by M/S Deco grill pattern DG-102(7.50 mm width and aperture 50 mm ) Complete all as specified and as directed by Engr-in-Charge (upto 09 storey).
68	Supplying and fixing aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with aluminium wire staples or beads, complete as specified
69	Supplying and fixing 4.0 mm thick plain sheet glass, ordinary quality, in panes not exceeding 0.5 sqm each, including glazing with aluminium and neoprene beads, complete all as specified
70	Supplying and fixing 4.0 mm thick frosted (obscured) glass, ordinary quality, in panes not exceeding 0.50 sqm each, fixed to aluminium window frames with beads or putty, complete all as specified
71	Supplying and fixing in repairs, 12 mm thick toughened glass (frosted) for door shutters, fixed to aluminium frames or walls, including all necessary stainless steel fittings (hinges, handles, locks), floor stoppers, and rubber beading, complete all as specified and directed
72	Supplying and fixing in repairs, 8 mm thick toughened glass for showcase shutters, fixed to frames or walls, including all necessary stainless steel fittings (hinges, handles, locks), floor stoppers, and rubber beading, complete all as specified and directed
73	S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with SS dash fasteners of required dia and lengthcomplete all as specified and directed by Engr-In- Charge.
74	S&F factory made single extruded WPC solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges shall be paid separately complete all as specified and directed by Engr-In- Charge.
75	Taking down shutters of any description, exceeding 1 sqm but not exceeding 2 sqm each, including removing to store or stacking for re-use as directed, complete all as specified
76	Materials and labour for 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, covered with decorative face veneer on one face and commercial type on the other face, including lipping/frame to match, complete all as specified and directed.
77	Resecuring or easing and adjusting wooden door shutters of any description, without taking down, exceeding 1 sqm but not exceeding 2 sqm each, including painting one coat on edges as required, complete all as specified and directed.
78	Supplying and fixing in repairs, 100 mm size stainless steel butt hinges, medium weight, including taking off old hinges and removing to store, and fixing with stainless steel screws to match, complete all as specified and directed.
79	Supplying and fixing 100 mm size stainless steel butt hinges, medium weight, fixed with stainless steel screws to match, complete all as specified and directed.
80	Supplying and fixing 150 mm long aluminium anodised barrel tower bolts of extruded section, fixed complete with matching screws, all as specified and directed.
81	Supplying and fixing 150 mm long extruded aluminium alloy handles, fabricated type, anodised, fixed complete with matching screws, all as specified and directed.
82	S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodized complete all as specified and directed by Engr-In- Charge.
83	Supplying and fixing in repairs, 150 mm long extruded aluminium alloy handles, fabricated type, anodised, including taking off old handles and removing to store, and fixing with matching screws, complete all as specified and directed.
84	S & F 300 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed by Engr-In- Charge.
85	S & F 200 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed by Engr-In- Charge.
86	Supplying and fixing in repairs, 300 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections, and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, including taking off old bolts and removing to store, complete all as specified and directed.
87	Supplying and fixing stainless steel two-legged floor door stopper, 100 mm size, including vulcanised rubber piece, fixed with and including matching stainless steel screws, complete all as specified and directed.
88	Supply and fixing factory made almirah/kitchen cabinet shutters using 18 mm thick marine plywood (BWP grade) conforming to IS 710, finished with 1.0 mm thick high gloss laminate on front face and 0.8 mm laminate on rear face, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instructions, including PVC edge banding on all edges with rounded corners, matching finish, and including all necessary fittings, fixtures and fastening for fixing to frame/steel racks, complete all as specified and directed by the Engineer-in-Charge.
89	Supply and fixing factory made kitchen partition using 18 mm thick marine plywood (BWP grade, type BB) finished on both sides with 0.9 mm thick decorative laminate, colour and pattern as approved, fixed with approved adhesive, including edge lipping, fixing to timber/metal framework with screws, complete all as specified and directed by the Engineer-in-Charge.
90	Supply and fixing stainless steel soft closing hinges, suitable for cabinet shutters, opening angle 90° to 110°, including screws and fixing complete all as specified and directed by the Engineer-in-Charge.
91	Supply and fixing stainless steel handles, decorative type, 100 mm size, suitable for kitchen cabinet shutters, including necessary screws and fixing complete all as specified and directed by the Engineer-in-Charge.
92	Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed by Engr-In- Charge.
93	Providing and applying dubbing coat plaster average 20 mm thick using ready mix prepacked dry mix mortar blended with PP fibres, applied on uneven/rough surfaces of brickwork or concrete on external faces by guniting or suitable mechanical method, including surface preparation, material handling, mixing, application, curing and finishing complete all as specified and directed by the Engineer-in-Charge.
94	Providing and applying sand faced plaster 10 mm thick using ready mix prepacked dry mix mortar blended with PP fibres and liquid waterproofing compound, on external surfaces of brickwork or concrete, including surface preparation, mixing, application, curing and finishing complete all as specified and directed by the Engineer-in-Charge.
95	Providing and applying internal plaster 15 mm thick (fair finish) using ready mix prepacked dry mix mortar, on fair faces of brickwork or concrete surfaces, including surface preparation, mixing, application, curing and smooth finishing complete all as specified and directed by the Engineer-in-Charge.
96	Providing and applying ceiling plaster 10 mm thick using ready mix prepacked dry mix mortar blended with PP fibres, on fair faces of concrete surfaces, including proper surface preparation, mixing, application, curing and finishing complete all as specified and directed by the Engineer-in-Charge.
97	Materials and labour for complete removal of existing treatment on wall and ceiling surfaces, including preparing surfaces (plastered or unplastered) by scrapping, cleaning, and removing all loose materials to receive new treatment, complete all as specified and directed.
98	Materials and labour for 1 mm to 2 mm thick wall care putty on wall surfaces, applied over plastered surfaces to make them even and smooth, including all necessary surface preparation, complete all as specified and directed.
99	Materials and labour for 1 mm to 2 mm thick wall care putty on ceiling surfaces, applied over plastered surfaces to make them even and smooth, including all necessary surface preparation, complete all as specified and directed.
100	Materials and labour for preparation of newly plastered or putty wall surfaces and applying one coat of alkali-resistant priming paint and two coats of oil-emulsion distemper of approved brand and tint, complete all as specified and directed.
101	Materials and labour for preparation of newly plastered or putty ceiling surfaces and applying one coat of alkali-resistant priming paint and two coats of oil-emulsion distemper of approved brand and tint, complete all as specified and directed.
102	Providing and applying anti-algal, water-based elastomeric exterior wall finish on old or newly plastered surfaces, including thorough surface preparation such as cleaning, removal of loose material, dirt, algae, and cracks, wherever required.Applying one coat of suitable wall primer / seal primer as per manufacturer’s specifications, followed by application of two coats of elastomeric paint (base coat and top coat) with coverage strictly as per manufacturer’s instructions, using roller/brush/spray as required, complete in all respects and as directed by the Engineer-in-Charge. Notes:(a) The work shall be executed only through an authorized applicator of the approved manufacturer.(b) Each coat shall be inspected and approved by GE before application of the subsequent coat.(c) The buildings (constructed in 1985) are structurally sound, and work shall be carried out accordingly.(d) The contractor shall submit a minimum 03 (three) years warranty certificate from the manufacturer/company.
103	Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-In- Charge.
104	Materials and labour for brickwork with sub-class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.
105	Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundations, etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exceeding 10 sqm on plan and not exceeding 1.5m in depth, getting out in hard or dense soil, including dressing or trimming sides and levelling or ramming of bottoms, complete all as specified and directed.
106	Demolition and breaking up drain pipes (salt-glazed stoneware, asbestos cement or reinforced concrete), set in cement mortar, including sorting and stacking serviceable materials and removing rubbish to a distance not exceeding 100m, complete all as specified and directed.
107	Materials and labour for concrete bed to drain pipes, including forming cradles, in cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate), for 150 mm bore pipe, complete all as specified and directed.
108	Materials and labour for reinforced concrete pipes, class NP2, 150mm bore, laid in trenches and jointed with collars, including testing, complete all as specified and directed.
109	Removing excavated (soil) materials and deposited out of MD land up to a distance of 15 Km directed by BMC complete all as specified and directed by Engr-In- Charge.
110	Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm hard/dense soil complete all as specified and directed by Engr-In- Charge.
111	Removal of existing water proofing treatment of the roof, cleaning with wire brushes etc including removing demolished materials outside MD land complete all as specified and directed by Engr-In- Charge.
112	Materials and labour for cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) in roof kerbs or mud stops, including weathering, slightly rounded or chamfered angles, complete all as specified and directed
113	Material and labour for preparation of RCC/PCC/plastered surface including cleaning, making the surface dry and free from dust, oil and loose particles, and applying bituminous primer conforming to IS 3384 @ 0.30 kg/sqm or as per manufacturer’s recommendation to achieve proper impregnation, followed by providing and laying APP modified bituminous waterproofing membrane 3 mm thick having weight not less than 3.0 kg/sqm, laid by torch application with minimum 100 mm side laps and 150 mm end laps, complete with sealing of joints, finishing and all as per manufacturer’s instructions and as directed by the Engineer-in-Charge.
114	Material and labour for applying two coats of aluminium paint over the APP membrane as protective finish, complete all as specified and directed by the Engineer-in-Charge.
115	Dismantling wrought iron or mild steel work of any description not otherwise provided for, including sorting and stacking serviceable materials and removing rubbish to a distance not exceeding 100m, complete as specified
116	Supplying and fixing rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters, and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe 410-W (Grade E-250) quality B, complete as specified
117	Materials and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe 290 (Grade E-165), complete as specified
118	Materials and labour for framed work such as gates and the like, ornamental and intricate design, conforming to Fe 290 (Grade E-165), including pintle hinges, stops, and hand-made sliding bolts, complete all as specified and directed
119	Materials and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete as specified
120	Materials and labour for preparation of new steel surfaces of any description and applying one coat of red oxide zinc chrome primer and two coats of synthetic enamel paint (ordinary tint), complete as specified and directed
121	Materials and labour for preparation of old steel surfaces over 10 cm width or girth of any description (previously painted) and applying one coat of synthetic enamel paint (ordinary tint), complete all as specified
122	Supplying and fixing in repairs, fancy type drapery rods, powder coated aluminium (minimum thickness 50 micron) of 25 mm size, including end brackets and hanging arrangements, complete as specified and directed
123	Dismantling plain or corrugated steel sheeting, any gauge or thickness, including Nainital or similar pattern roof coverings or chajjas (FRP or any other pattern), including sorting and stacking serviceable materials , complete as specified
124	S&F pre-painted hot- dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.5 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.
125	Dismantling of paver blocks or concrete tiles, any description or thickness, in floors, pavings, or aprons, laid, bedded and pointed in any mortar, including sorting and stacking serviceable materials , complete all as specified and directed.
126	Materials and labour for coloured glazed machine pressed chequered cement concrete tiles, size 300 x 300 x 25 mm (or standard size 200 x 200 x 25 mm), set, jointed and pointed in neat cement slurry, over and including 20 mm thick screed bed in cement mortar 1:6, including all cutting and polishing, complete all as specified and directed
127	Materials and labour for cement concrete type B-2, 1:2:4 (using 40 mm graded stone aggregate) as in hardstanding, filling and mass concrete in foundations, including use and waste of formwork/screed strips, finished even and fair (or rough to receive topping as directed), complete all as specified and directed.
128	Materials and labour for sand filling under floors or in foundations, including watering and consolidation, complete all as specified and directed.
129	M&L for 60 mm thick glazed coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment incl dismantling old u/s one complete all as specified and directed by Engr-In- Charge.
130	Supply only approved SBR Latex polymer complete all as specified and directed..
131	Supply only liquid water proofing compound complete all as specified and directed..
132	Supply and fixing of 4 to 6 mm thick plywood/plyboard in window openings or similar locations for carrying out guniting work, including proper cutting, fixing, sealing of edges to prevent leakage of mortar, and subsequent removal after completion of guniting, making good the disturbed surfaces to match the existing finish, complete all as specified and directed by the Engineer-in-Charge.
133	PART \\"B\\" INTERNAL WATER SUPPLY Taking up or down steel tubing (GI tubing) and connections, including cleaning for re-fixing or removal to store (or off the premises as directed), including disconnection of fittings from tubing, sorting and stacking serviceable materials, a complete all as specified and directed.
134	40/50 mm bore
135	25 mm bore
136	20 mm bore
137	15 mm bore
138	Supply and Fixing of steel water tubing 40 mm bore , galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends, fixed to wall including necessary & capacity up to 15 th floor in high rise buildings in short piece/length, including breaking the existing brick wall for replacement of corroded GI pipe in/on wall and making good the disturbed surfaces complete all as specified and directed by Engineer-in-charge. Note Work to be carried out in high rise buildings plain wall or in shafts or in terraces or inside the flats for cutting the existing GI pipe line and replace the same with new GI pipe in short piece of full length complete all as specified and directed by Engineer-in-Charge. Note :- Supply & Fixing of one GI Union in raising main, one in delivery lines
139	Materials and labour for supplying and laying Chlorinated Polyvinyl Chloride (CPVC) pipes, 32 mm outer dia, SDR 11, conforming to IS 15778, including all plain CPVC SDR 11 fittings (such as elbows, tees, sockets, reducers, bushings, step-over bends, end caps, and plugs), jointed with one-step CPVC solvent cement, including testing, fixed complete to walls/ceilings or laid in floors or trenches, as specified.
140	ditto as item No 3.00 but of size 25 mm
141	ditto as item No 3.00 but of size 20 mm
142	Supply and fix in replacement in existing line, gun metal gate valve with iron wheel head screwed both ends for iron pipe including fittings i.e. union, socket etc complete all as specified and directed by Engineer-in-Charge with following sizes :-
143	15 mm bore
144	25 mm bore
145	40 mm bore
146	Supply and fixing in replacement of stop valve 15 mm nominal bore, concealed type, chromium plated, made of cast copper alloy, screwed down, high pressure, with long shank and metal cup, complete with crutch or butterfly handle, suitable for connection to GI pipe or union, including taking down old valve, making necessary connections and making good complete all as specified and directed by the Engineer-in-Charge.
147	Supply and fixing in replacement of bib tap 15 mm nominal bore, fancy type, chromium plated, made of cast copper alloy, surface mounted, screwed down type with crutch or butterfly handle, suitable for connection to GI pipe or brass ferrule, including taking down old tap, making necessary connections and making good complete all as specified and directed by the Engineer-in-Charge.
148	Supply and fixing in replacement of bib tap 15 mm nominal bore, two-way type, fancy type, chromium plated, made of cast copper alloy, surface mounted, screwed down type with crutch or butterfly handle, suitable for connection to GI pipe or brass ferrule, including taking down old tap, making necessary connections and making good complete all as specified and directed by the Engineer-in-Charge.
149	S& F in repairs Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, of size Fe 410-W(GdeE- 250) quality B or all as specified and directed by Engineer-in-Charge. (ii) Cost of making necessary holes in wall making good the disturb surfaces using cement and sand mortar for fixing iron section is deemed to be including in the rate quoted.
150	Supply and fixing in replacement of overhead shower 15 mm nominal bore, 250 mm dia, single flow type, ABS body with chrome plated finish and grey face plate, with self-cleaning (rubit) system, including shower arm 240 mm long, suitable wall flange, complete including taking down old unit, making necessary connections and making good complete all as specified and directed by the Engineer-in-Charge.
151	Supply, installation, testing and commissioning in replacement of motorised butterfly valve 50 mm dia, comprising butterfly valve with single phase electric actuator, complete with suitable mounting arrangement, brackets, two limit switches for open and closed position indication, splash proof enclosure, necessary wiring and connections, complete all as specified and directed by the Engineer-in-Charge.
152	Supply, installation, testing and commissioning in replacement of float type point level sensor, magnetic type with ring magnet and epoxy sealed reed switch, complete with Teflon insulated connecting cable, suitable mounting arrangement, wiring and connections, complete all as specified and directed by the Engineer-in-Charge.
153	Supply and fixing in replacement of 6 core x 1.5 sq mm FRLS PVC insulated and PVC sheathed armoured copper cable, laid on wall surface or in trench as required, including clamps, saddles, excavation, sand cushioning, protective covering, backfilling, making connections at both ends with glands and lugs, complete all as specified and directed by the Engineer-in-Charge.
154	Supply and fixing in replacement of 5 pair x 0.5 sq mm FRLS PVC insulated and PVC sheathed armoured copper cable, laid on wall surface or in trench as required, including clamps, saddles, excavation, sand cushioning, protective covering, backfilling, termination, testing and commissioning, complete all as specified and directed by the Engineer-in-Charge.
155	Supply, fixing in replacement, installation, testing and commissioning (SITC) of indoor type PLC-based Valve Automation and Communication Panel, suitable for control and/or monitoring of:18 Nos. motorized valves28 Nos. magnetic sensorsThe panel shall be fabricated from 2.0 mm thick CRCA sheet, duly powder-coated, of adequate size, complete in all respects as specified and directed by the Engineer-in-Charge.2. Panel Features & Components2.1 Functional Requirement(a) Automatic operation and control of motor-actuated valves.2.2 Electrical Components(b) SMPS01 No., 5A ratingMake: Schneider / NHP
156	(c) Interposing Relays24V DC coil4 pole, 2A contact ratingMake: OEN / Omron / IDEC / Allen Bradley(d) MCB10A, SP/DP as required – 01 No.(e) Selector SwitchesAs requiredMake: Schneider / EsbeeTo make the system fully functional. all panels shall be consisting of the following :-(a) Rack mountable Web Smart Switch with 28 ports and POE for CPE hardware and following specifications:-(i) Number of Ports 24 10/100Base-TX Ethernet ports 2, 10/100/1000BASE-T 2 Combo 10/100/1000BASE-T/SFP.(ii) Port Standard Supply and fixing functions • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper) • IEEE 802.3x Flow Control • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) • IEEE 802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3 • IEEE 802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3 Switching Capacity • 12.8 Gbps Make : Siemens, Dlink, Ubiquiti, Cisco(b) Hot pluggable 1310 nm multimode/Single mode SFP (mini-GBIC) transceiver, supporting full duplex, Gigabit speeds on multimode/Single mode fiber for distances of up to 550m/550m/10km on 62.5µm/50µm/9µm respectively in a metal housing to reduce EMI and to increase durabilityMake : Dlink, Ubiquiti, Cisco, Siemens, HP
157	(c) Rack Mountable LIU with the following specifications:-(i) Rack Mountable 12 Port Unloaded LIU (ii) Aluminium Base Material(iii) Slim 1 U mounting height (iv) Metal Shelf Aluminium 1.2 mm thick(v) Splice tray Aluminium 0.6mm (vi) Winding Panel – Plastic (vii) Cable Plug – Rubber for minimum 2 cable entries (viii) Adaptor Panel Aluminium 1.5 mm thick(ix) 2 fiber spools built in for 900 um tight buffered fibre storing(x) Capable of storing upto 3 mts of 900 um tight buffered fibre per adaptorMake : Dlink, Ubiquiti, Cisco(d) SC-LC Duplex SM Patch Cord 0.9 mm dia of suitable length (i) Size 0.9mm dia (ii) Insertion Loss <=0.2 db, max 0.3 db(iii) Return Loss PC>=45dB, UPC>=50dB, APC>=60dB (iv) Connector Ferrule Ceramic(v) Apex Offset <50um (vi) Fiber Height +-100nm (vii) End Face Radius of Curvature 7mm
158	(e) SC Simplex Coupler/Adaptor (i) Insertion Loss <=0.2 dB for Zirconia Sleeve (ii) Sleeve/Ferrule Withdrawl Force 2.0N to 5.9NMake : Dlink, Ubiquiti, Cisco(f) Adaptor Panel (i) 6 port adaptor Panel for SC AdaptorsMake : Dlink, Ubiquiti, Cisco(g) SC-SM-Simplex Pigtail of suitable length(i) Insertion Loss <=0.2 db, max 0.3 db (ii) Return Loss PC>=45dB, UPC>=50dB, APC>=60dB(iii) Connector Ferrule Ceramic (iv) Apex Offset <50um (v) Fiber Height +-100nm(vi) End Face Radius of Curvature 7mm
159	Seamless Integration of the above PLC Panels into the Existing SCADA System incorporating (a) Development:(i) SCADA Screens for new Updated Panel configuration(ii) Layout for App new Updated Panel configuration(iii) Report Format new Updated Panel configuration(b) On-site development:(i) Modifications in SCADA Screens (ii) Modifications in reporting format(iii) Modifications in App layout
160	The quoted cost shall deem to be included the cost of communication for 12 months from the date of completion. Above All automation panel should connected to existing SCADA server and any other leftout devices and accessories require to commissioning should be consider and same should be include in quoted rates and department will not pay extra cost for the same.Make of Control Panel: Cimcon Software Pvt Ltd/ Reckronic Devices and Systems / Sombansi Schneider/UniversalSwitchgear. Note :- Cost for Synchronising of panel in to existing SCADA system is in contractors scope only and no extra payment shall be given to the contractor by the department.
161	S&F SMC PANEL TANK in replacemet of PVC water storage tank confirming to Panel must be ISI Marked and have ISI Logo with CML and Batch Number along with ISI Code.(ISI 14399 Part-1 & Part-11-2006) of the under mentioned size (3mt x 2mt x 2mt) and capacity (12 KL.) Made out of HOT PRESS MOULDED SHEET MOULDING COMPOUND (SMC) Panels of size 1005mm X 1005 mm. The flange should be perpendicular to the main surface. The shape should be Trunk Type for extra strength and 90 degree flanges predrilled for bolting. All the Flanges of the Panel should have maximum 13 Nos. holes for fastening/joining the panels to one another. Hot Pressed Moulded SMC Pre Drilled Corner Pieces with built-in ribs of the size 75mm X 75 mm should be provided for 90 degree joints of tank walls or wall to base or wall to roof joints complete Hot Dipped Galvanized (HDG) hardware nuts, bolts and washers. Special sealant having excellent UV Resistance as well as suitable for portable water, complete with Top Covered construction having Man-Hole with Cover of Dia 600mm and internal FRP Ladder. The tank after erection and assembled as per Manufacturer Specification's shall be filled with water upto overflow level, which will be placed near the roof of the tank and test for leakages rectified any leakage found during the testing should be rectified to make it 100% leak proof complete as per direction of Engineer-in-Charge. (ISI Logo & CML number must be printed on all Panels). Make : Sintex Code No GS-PT-010-S2.5 or equivalent model of make in M/s BT composite Ltd / M/s Mahindra composite Ltd.NOTE: (i) Rate quoted shall deemed to be inclusive of internal and external ladder made out of GRP/ Pultruted Section and necessary modifications or demolition to RCC foundation if required. MS supporting channels and necessary PVC profile including FOUNDATION, GRILLAGE, UNLOADING, SHIFTING & OTHER CIVIL COMPONENT IN CLIENT SCOPE Deduction for dismantled material received after dismantling of old pipes/structures.
162	Supply and laying in replacement of spigot and socket ductile iron water tubing 100 mm size ,class K-9, cement mortar lining on inner surface and one coat of bituminous paint over exposed surface ISI marked, IS No. 8329: 2000, including rubber joint of suitable size laid on roof/floor/trenches with proper alignment as per site requirement and carryout testing against leakage before filling the trenches etc complete all as specified and directed.
163	Excavation in trenches not exceeding 1.5 mtr wide not exceeding 1.5 mtr in depth and getting out in soft/loose soil all as specified.
164	Removing excavated material exc 250 M but n.exc 500 M and depositing where directed all as specified.
165	Supply and fixing , Installation, Testing and Commissioning in repairs of OFC Cable to be pulled over head and duly fastened/attached to a PVC coated messenger wire / stay wire of gauge either with the required clamps of suitable size not more than 3 feet apart or with a web between the OFC and messenger wire along with endplates at both ends of the suspended cable complete all as specified and directed.i) 6F Single mode OFC suitable for outdoor networking applications(1) 6 Fibers type single mode, wavelength 1310, Attenuation 0.38/km(2) Outer jacket of HDPE sheath(3) Jelly Filled Core(4) Wrapped with Corrugated Steel Tape(5) Armoured with a pair of Steel Wire for rigidity(6) Anti Termite and rodent repellent(7) Water Proof and moisture resistantMake Finolex, Dlink
166	Supply and fixing in repair of PVC coated GI messenger/stay wire of suitable diameter, for supporting OFC cable, including fixing with suitable clamps at spacing not exceeding 1.0 metre or by providing suitable lashing/webbing arrangement between OFC cable and messenger wire, complete with end plates/anchoring arrangements at both ends. The rate includes proper tensioning, alignment, all accessories and making good, complete all as specified and directed by the Engineer-in-Charge.
167	Supply and fixing in replacement of brass float valve 40 mm nominal bore, ISI marked, high pressure type, complete with polyethylene float (ball/flat type) and fly nut, suitable for connection to GI pipe, including necessary GI fittings such as elbows, reducers, nipples, etc., taking down old valve, making necessary connections and making good, complete all as specified and directed by the Engineer-in-Charge.
168	Supply and fixing in replacement of angle cock 15 mm nominal bore for GI pipe or suitable for 20 mm OD CPVC pipe, chromium plated, made of brass/cast copper alloy, complete with necessary fittings, clamps and saddles, including taking down old fitting, making connections and making good, complete all as specified and directed by the Engineer-in-Charge.
169	PART \\"C \\" FIRE FIGHTING Supply and replacement, installation, testing & commissioning of addressable micro processor based 2 wire fault tolerant loop, required loop net workable type Single loop (each loop accessing maximum 99 detectors and 99 modules) fire alarm/detection control panel. The panel shall be able to give location of all fire/fault signal with address. The panel shall have rectifier, loop cards, LCD display unit to indicate Fire/Fault signal with address. The panel shall have a built in power supply and battery charger alongwith maintenance free SMF lead acid batteries as per manufacturers design with battery charger complete as required and as per specifications duly approved by EN 54 complete including 5 amp switch socket combination with suitable point wiring making connections all as specified and directed by Engr-in-Charge.Make : Morley-IAS by Honeywell model Name/Number DXc2/714-001-225 or Bosch model NO FPA-1000-V2/Schneider cat No FFSULH1002 Model No ESM, ULTIMA.
170	Supply & fix in replacement single headed outlet hydrant valve 100mm having 63mm outlet with lock pin wheel conforming to IS 5290 complete all as specified and directed
171	Supply & fix in replacement double headed outlet hydrant valve 100mm having 63mm outlet with lock pin wheel conforming to IS 5290 complete all as specified and directed
172	Supply and fix in replacement 63 mm dia 15 meter long canvas hose pipe conforming to IS 636 complete with Stainless steel male and female coupling conforming to IS 903 complete all as specified and directed.Make: Minimax / Safex / Dunlop or equivalent.
173	Supply & fix in replacement Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle complete all as specified and directed. Make: Minimax / Safex / Dunlop or equivalent.
174	Material and labour factory fabricated Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard fixed on wall with necessary nuts/bolts or welding to existing MS pipe by supporting angle complete all as specified and directed by Engr-in-Charge. Make: Minimax / Safex / Dunlop or equivalent.
175	Supply & fix in replacement hose Reel drum swivel type with mounting base plate company made along with 30 mtrs X 20 mm dia rubber hose pipe with shutoff nozzle complete all as specified and directed. Make: Minimax / Safex / Dunlop or equivalent.
176	Supplying and fixing in replacement, hand-operated butterfly valve, 100 mm bore, PN 1.6 (pressure rating approximately 16 kg/sqcm), complete all as specified and directed.
177	Supply and fix in replacement of Gun metal fire brigade in let connection for connecting to external fire hydrant ring main consisting of two nos 63 mm dia instantaneous type male coupling with built in check valves and 80 mm dia, flanged outlet complete with all accessories.
178	Supply, replacement, installation, testing and commissioning of addressable manual call point, resettable type, suitable for fire alarm system, complete with all necessary accessories, mounting arrangements, wiring connections and integration with existing system, complete in all respects as specified and directed by the Engineer-in-Charge. Make: Schneider / Honeywell / Bosch / Siemens or equivalent.
179	Supply and fixing in replacement of addressable sounder with strobe, having minimum sound output of 90 dB, suitable for fire alarm system, complete with all necessary mounting accessories, wiring connections and integration with existing system, complete in all respects as specified and directed by the Engineer-in-Charge. Make: Schneider / Honeywell / Bosch / Siemens or equivalent.
180	Supply and fixing in replacement detectors Complying with and type certified to EN - 45 Addressable type optical multi Sensor detector heat and smoke combination Photoelectric /Optical with base with self built intelligence as per IS: 11360 complete all as specified and directed.
181	Supply and fixing in replacement red colour PVC insulated PVC sheathed armoured copper conductor cable of size 2 Core x 1.5 Sqmm with casing capping including fixing on walls with saddles not more than 60 cm intervals complete all as specified and directed.
182	Supply and fix in replacement Fe-410-W(Gde E-250) quality B for Compound girders and stanchions, lattice girders, aerial masts,staging for water tanks , ladders, and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, nuts, bolts, washers etc. including necessary fabrication work with hinges, handle and applying two coats of synthetic enamel paint over one coat of metal primer complete all as specified.(ii) Cost of making necessary holes in wall making good the disturb surfaces using cement and sand mortar for fixing iron section is deemed to be including in the rate quoted.
183	M& L for Disconnecting all the cable, suction and discharge line from the existing booster pump of capacity 5 to 10 HP of Make kirloskar and after servicing, winding repairing refitted the same on existing foundation making good disturb surfaces testing and commissioning complete all as specified and directed by Engr-in-charge.Note :- The item rate also includes PCC foundation, Fibre sheet, angle iron frames, Pump base frame, vibration pads, grouting of nut bolts.
184	Supply and Fix in replacement of Automatic Star Delta starter control panel for 3 phase, 10 to 15 HP (7.5 to 11.5 KW) motor which includes contactors, relays range 7.5-16A, control wiring, Selector switches, Ammeter, Voltmeter, LED Phase indicating lamps complete in sheet metal enclosure company made including connecting and testing, fixing on walls with grouting and providing out side box for to protect from weather and rain complete including configuration with existing panel with authorised rep all as specified and directed.
185	Supply and fix in replacement MS ERW flanged pipe 100mm NB heavy duty including all fittings such as elbow, bend, socket, tee, tail piece with welding work, threading & earth work etc for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer.Note : Rate deemed to be inclusive of bituminous wrapping and coating as per IS 15337:2003 for 100 mm NB pipes if required to be laid under ground
186	Supply and fix in replacement hose drum adopter connection (shank reducer) all as specified and directed Make: Schneider / Honeywell / Bosch / Siemens or equivalent.
187	Supply and Fix in replacement MCCBs 40 Amp 3 pole 415 volts, 16KA, 50 HZ including factory made SS enclosure fixed on wall and making connections complete all as specified and directed
188	Supply and fixing in replacement MCB double pole 16 Amps, 10 KA, 'C' series with factory made SS enclosure fixed on wall and making connections complete all as specified and directed.
189	S&F in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 3 core fixed on wall with steel saddles as approved by Engineer-in-Charge.
190	Supply & fix in repair sluice valve 100mm size both ends flanged with high tensile stainless brass spindle, I body as per IS-14846, ISI Marked,PN-1.6 including all joints with rubber or fibre board, nuts, bolts, washers complete all as specified and directed.
191	Supply & fix in repair Non return valve 100mm size both ends flayed with high tensile stainless steel spindle, I body including all joints with rubber or fibre board, nuts, bolts, washers complete all as specified and directed.)
192	Supply and installation in replacement of Pressure gauge 4\\" dial 0-14 kgs rating oil filled type complete all as specified and directed
193	M & L for Pressure switch Universal type with suitable pressure range in replacement having die cast aluminium construction and SS sensing element with ball valve, fittings viz. unions, collars, reducers etc.existing header for fire pumpsets, wiring up to Motor Control Centre complete all as specified and directed by the engineer-in-charge.
194	Construction of brick masonry valve chamber in replacement of internal size 1.20 m × 1.20 m × 1.20 m with top of chamber 0.30 m above ground level (GL), suitable for fixing of sluice valves, comprising 150 mm thick hardcore of broken stone, well compacted, 150 mm thick PCC in 1:4:8 (Type D-2) as foundation, 230 mm thick brick masonry in cement mortar 1:4, 15 mm thick internal and external plaster including floor/top in cement mortar 1:3 finished smooth and even without extra cement slurry, providing and fixing 8 mm thick MS cover plate on 50 mm × 50 mm × 6 mm MS angle frame embedded in PCC 1:2:4 (Type B-1 coping), with rectangular hinged opening of size 150 mm × 100 mm complete with locking arrangement, holdfasts and all necessary fittings, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces, including earthwork in any type of soil, excavation, dressing, backfilling and disposal of surplus excavated material outside MD land, complete all as specified and directed by the Engineer-in-Charge.
195	Taking down copper or aluminium point wiring (light, fan, socket, or power point) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, etc., including removing materials to store for safe custody or for taking credit as directed, and making good all disturbed surfaces of walls, ceilings, floors, etc., to match existing complete all as specified.
196	M & L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, passing through PVC casing caping including accessories and provision of PVC box for mounting of modular Switchs & Sockets as required at site as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following:-NOTE : Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm.
197	One light/Exhaust/Ceiling fan point controlled by one switch.
198	One 3 pin switch socket combination 5 Amps on the same board with other switches.
199	One 3 pin switch socket combination 5 Amps, independent.
200	Ditto all as per Item No. 192.00 here-in-before, but using 2.5 sq mm copper conductor for phase and neutral and 2.5 sq mm copper conductor for earth, for providing one 3-pin 15 Amp socket outlet controlled by one switch. The socket outlet shall be wired on an independent circuit directly from the distribution board (MCB). No tapping shall be permitted from the lighting circuit. Complete all as specified and directed by the Engineer-in-Charge.
201	Supplying and fixing in replacement, modular switch, 1 module, single pole one way, 6 Amp, complete all as specified
202	Supplying and fixing in replacement, modular switch, 1 module, single pole one way, 16 Amp, complete all as specified
203	Supplying and fixing in replacement, modular socket outlet, 2 module, 6 Amp (2/3 pin combined), ISI marked, 230 volts, complete all as specified
204	Supplying and fixing in replacement, modular socket outlet, 2 module, 6/16 Amp (6 pin combined), ISI marked, 240 volts, complete all as specified
205	supplying and fixing in replacement, modular stepped type electronic fan regulator, 120W, 2 module, 230 volts, ISI marked, and connecting up complete all as specified
206	Supplying and fixing ceiling rose, surface type, PVC/polycarbonate (bakelite type), isolated body, 230V, with 3 terminals, complete all as specified and directed
207	Taking down existing wooden or PVC board, including disconnecting all electrical connections and removing materials to store for safe custody supplying and fixing modular metal flush box (8 module) and modular blank plate for mounting switches, including making good all disturbed surfaces of walls to match existing, complete all as specified
208	Ditto all as per Item No- 196.00 above but of modular metal flush box, 6 module.
209	Ditto all as per Item No- 196.00 above but of modular metal flush box, 4 module.
210	Ditto all as per Item No- 196.00 above but of modular metal flush box, 3 module.
211	Ditto all as per Item No- 196.00 above but of modular metal flush box, 2 module.
212	Supplying and fixing modular white cover plate with frame, 8 module, complete all as specified and directed
213	Supplying and fixing modular white cover plate with frame, 6 module, complete all as specified and directed
214	Supplying and fixing modular white cover plate with frame, 4 module, complete all as specified and directed
215	Supplying and fixing modular white cover plate with frame, 3 module, complete all as specified and directed
216	Supplying and fixing modular white cover plate with frame, 2 module, complete all as specified and directed
217	Supplying and fixing LED luminaire, size 600 mm x 600 mm (2x2), 35/36 watt, 220 V AC, surface mounting type, comprising white powder-coated CRCA housing, seamless front frame with flat white high transmission acrylic cover, complete with driver, holders, and LED lamp, including making all electrical connections, complete all as specified and directed.
218	Supplying and fixing in replacement, Slim LED integrated batten, 20 watt (4 feet), cool day light, with powder-coated CRCA decorative patti, prewired, complete with two Nos. of PVC rectangular blocks (size 75 x 75 x 20 mm) for mounting. The rate includes taking out the old fitting (including any accessories), removal to store, and making good all work disturbed at fixing, complete all as specified and directed.
219	Supplying and fixing in replacement, Slim LED integrated batten, 10 watt (2 feet), cool day light, with powder-coated CRCA decorative patti, prewired, complete with two Nos. of PVC rectangular blocks (size 75 x 75 x 20 mm) for mounting. The rate includes taking out the old fitting (including any accessories), removal to store, and making good all work disturbed at fixing, complete all as specified and directed
220	Supplying and fixing in replacement, sheet metal enclosure for Distribution Board (DB), SPN (Single Pole and Neutral), 8-way, with rated bus bar, confirming to IP 43-IK 09 with acrylic door, complete with DIN rail, Neutral and Earthing bar complete all as specified and directed
221	Supplying and fixing in replacement, Miniature Circuit Breaker (MCB), SPN (Single Pole and Neutral), 240V, 10 KA 'C' curve, 10 to 25 Amp rating, complete all as specified
222	Supplying and fixing in replacement, Miniature Circuit Breaker (MCB), single pole (SP), 240V, 10 KA 'C' curve, up to 20 Amp rating, complete all as specified
223	S&F in relplacement with submain wiring in PVC conduit using 2 runs of 6 sqmm PVC insulated stranded copper conductor, single core, FRLS incl single run of 6 sqmm stranded conductor as earth wire all as specified and as directed by Engr- in-Charge.
224	S&F 10W LED batten with inbuilt smart motion sensor, 230 Volt , 50 Hz , 2 feet, polycarbonate extruded channel, with diffuser for glare free light, Inbuilt motion sensor prewired with 25% dimmer illuminous in ideal time with all accessories including connecting up with twisted twin core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings complete all as specified and directed.
225	Taking out unserviceable ceiling fan and deposit to MES Store, supply and fixing in replacement with ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified.
226	Taking out unserviceable Exhaust fan and deposit to MES Store,S & F Exhaust fan steel body, AC single Phase. 230V 50 Hz, RPM 1200, Copper winding of size 300 mm sweep with louvers fixed type made out of 16SWG GI sheet with horizontal ventilation machine pressed cutted ventilation, including connection as required at site with three core flexible copper cable all as per specified and directed.
227	S&F DB TPN confirming to IP 43-IK 09 with acrylic double door, 04 way complete with din rail, Neutral and Earthing bar complete and making good the disturbed surfaces.
228	Supplying and fixing miniature circuit breaker (MCB), SPN (Single Pole and Neutral), 240V, 10 KA 'C' curve, 32 Amp capacity, in the MCB distribution board, complete with connection, testing and commissioning, all as specified and directed.
229	Supplying and fixing Moulded Case Circuit Breaker (MCCB), 4 Pole, 415V, 16 KA breaking capacity, 63 Amp rating, with thermal magnetic release and Ics=100% Icu, complete with all necessary connections, testing and commissioning.
230	Providing and laying plate earthing with galvanised steel earth plate electrode of size 600 mm × 600 mm × 6 mm thick, buried in ground at a depth not less than 2.25 m below ground level with top edge of plate not less than 1.5 m below ground level, complete with GI earth lead wire 4 mm dia connected to plate by means of bolts, nuts, washers and check nuts. The earthing system shall include earthing test point, watering arrangement (if required), protection pipe, funnel with mesh, and all accessories as per standard practice, complete including testing of earth resistance and making good complete all as specified and directed by the Engineer-in-Charge.
231	Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp, 240 volts complete all as specified and directed.
232	Taking down unsv sub main and M&L for submain wiring in PVC conduit using 2 core 4 sqmm PVC insulated stranded copper conductor, single core, FRLS incl single run of 4 sqmm stranded conductor as earth wire all as specified and as directed by Engr- in-Charge.
233	Supply, Installation, Testing & Commissioning (SITC) of LT panel, cubical indoor type, suitable for 415V, 3 phase, 4 wire system, fabricated out of 2 mm thick CRCA sheet steel, dust, vermin & weather proof, CPRI approved, complete as specified and as directed.Panel shall be mounted on MS angle iron frame (40×40×5 mm) duly grouted in PCC (1:2:4, Type B-1) on floor, with front open hinged doors, locking arrangement, powder coated finish, and segregated compartments for incoming/outgoing feeders.Panel shall include:(a) 200 Amps rated copper bus bars (R, Y, B & N of equal size)(b) Top & bottom cable entry with suitable glands(c) Provision for thimbles/lugs, vision glass for meters(d) One spare MCCB compartment(e) Dismantling of existing meter cabin panel, shifting & reconnection of cables/meters to new panel(f)Making good disturbed surfaces after installationComplete all as specified and directed by Engineer-in-Charge.
234	Components Included(a) MCCB, 100A, 4 Pole, 415V, thermal magnetic release type,breaking capacity Ics = 100% Icu, 25 kA – 01 No(b) MCCB, 63A, 4 Pole, 415V, thermal magnetic release type,breaking capacity Ics = 100% Icu, 25 kA – 02 Nos(c) MCB, SPN, 40 Amps – 10 Nos(d) Digital Multifunction Meter (LCD type) complete with CT/PT,capable of measuring parameters such as Voltage, Current, Frequency, Power Factor, kW, kVAR, kWh etc. – 01 Set(e) Phase Indication Lamps (R, Y, B) – 01 Set (3 Nos)(f) Copper Bus Bar, 200 Amps rated – R, Y, B & N (01 Set of 4 Nos)(g) Reconnection of sub-main cable(2 core, 4/6 sqmm copper conductor) including termination with energy meter – 01 Job(h) Making good damages to meter room/cabin during shifting of panel – 01 Job
235	Taking down existing lightning protection system carefully, keeping the same in safe custody, and refixing/reinstalling the same after completion of roof work, complete all as specified and as directed by the Engineer-in-Charge.Note:The quoted rate shall be deemed to include the cost of all fixing accessories such as nuts, bolts, washers, insulators, and other sundries required for proper installation at site. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Maharashtra Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Reapair To Sho Building (P-45) At Old Navy Nagar Under Ge (Nw) Navy Nagar Colaba, Mumbai, Mumbai-Maharashtra

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Reapair To Sho Building (P-45) At Old Navy Nagar Under Ge (Nw) Navy Nagar Colaba, Mumbai, Mumbai-Maharashtra

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us