Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down existing theatre/auditorium chairs including removal of seat and back cushions, armrests and anchoring bolts, carefully dismantling from the floor without damage to the structure; cleaning of fixing area; storing chairs to nearby store and re-fixing the same in original or new alignment including drilling, providing new anchor fasteners/bolts as required, leveling, alignment, tightening, and making good the floor finish around anchor points complete all as specified and directed by Engineer-in-Charge. |
| 2 | Dismantling old unsv corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings, complete all as specified. |
| 3 | M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl ridge all as specified and directed . |
| 4 | M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in ridge of roof covering/ cladding to wall, fixed with self tapping screws incl ridge all as specified and directed . |
| 5 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 6 | S&F structural steel work as in roof trusses, purlins, rafter, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-290-W (Gde-E-165) quality B complete all as specified. |
| 7 | Demolition of wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets,all as specified. |
| 8 | Supply and fixing 30mm thick ACOUSTIC PERFORATED PRELAM PVC WALL PANELLING consisting of PVC Perforated panels having wall thickness of 5mm ( ±0.25 ) PVC sheet of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, and the desired thickness of Glasswool/ Rockwool pasted with perforated sheet with suitable adhesive.The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. the wall using screws of adequate length. The screws shall be placed at a distance of 150mm and shall be 25mm from the edge of the insulated panel on all four sides of the panel. The PVC Strips of 5mm ( ± 0.25 ) thick PVC Sheet of width 75mm feathered at the edges shall be stuck using solvent cement adhesive at the places where two panels are joined, so as to cover the screw of both the panels, using solvent cement. 900 heat bent strips of 5mm thick PVC sheets of width 75mm x 75mm feathered at the edges shall be stuck at wall joints / pillars etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. |
| 9 | Supply and fixing30mm thick Prelam Perforated PVC False Ceiling made of 5mm wall thickness PVC perforated sheet of size 600mm x 600mm. On 25mm Glasswool/ Rockwool 5.0mm (±0.25) Prelam perforated PVC sheet of Density 600 Kg /Cbm manufactured by an ISO-9001 - 2015 certified company, is stuck with glasswool on one side with suitable adhesive. The panel is inserted in a frame made of anodised Aluminum or GI 'T' section of size 1''x1'' (25mm x 25mm) in square type grid of size 2' x 2' (600mm x 600mm). The aluminium/ GI framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level. The aluminium/GI framework is supported on side wall with the help of aluminium/GI \\"L\\" section of size 1\\"x1\\" (25x25mm) angles. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. |
| 10 | Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar. |
| 11 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust for laying tiles in flooring, complete all as specified and directed. |
| 12 | M & L for 25 mm thick cement concrete in flooring type Bo, 1:2:4 (12.5mm graded aggregate) with liquid water proofing compound as per manufacturers instructions for laying floor tiles. Note (WPC will be measured and paid separately). |
| 13 | M&L for Virified Ceramic tiles 9-10 mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,as in floors etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile color including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:4 (Tile pattern and decoration may be as suggested by Engineer-in-charge). |
| 14 | M&L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in vertical surface like skirting /dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:3 |
| 15 | M&L for Granite (of any type) tiles 18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15 mm thick screed bed with CM 1:4 including necessary adhesive complete all as specified. |
| 16 | M & L for 18 to 20 mm thick machine cut green marbel stone in single piece as in steps and risers, landings, jambs, pillars, window cills, and like laid over cement screed and jointed with base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm thick plastering with cement mortar 1 : 3 including necessary adhesive complete all as specified |
| 17 | M&L for Solid PVC Wall Lining consisting of thickness not less than 5mm Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as directed by Engr-in-Charge. |
| 18 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each |
| 19 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each |
| 20 | M&L for framed work in (Fe 290 Gde E 165 )as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete. |
| 21 | M&L for 40 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE. |
| 22 | Demolition of cement Concrete jalies of any thickness fixed in vertical surface and disposing of unserviceable materials/debris outside the site premises as per instructions to low laying areas as directed by the Engr-in-Charge. |
| 23 | Dismantling existing aluminium door frames, shutters, fixed/ sliding components, partition including glass panels, hardware fittings, and supports, stacking the serviceable materials as directed, and disposing of unserviceable materials/debris outside the site premises as per instructions, all complete as directed by the Engineer-in-Charge. |
| 24 | S&F of Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 25 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 26 | S&F 4.00mm thick sheet glass, selected ordinary quality and glazing with rubber beading or with glazing clips not exc 0.5 sqm in each pane including solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, all as specified and directed. |
| 27 | S&F 5.50mm thick sheet glass, selected ordinary quality and glazing with rubber beading or with glazing clips exc 0.5 sq. m in each pane including solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, all as specified and directed. |
| 28 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 29 | Supply and fixing double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complate all as specified and directed. |
| 30 | M & L Cement concrete type B1, 1:2:4 (20 mm graded aggregate) as in coping, bed plate for hold fast etc. |
| 31 | M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed. |
| 32 | S & F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed |
| 33 | S & F 150 mm size extruded aluminium alloy handles, febricated type anodised |
| 34 | S & F 300 mm aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) not less than 12mm dia with and and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium and fixed to wooden door shutters |
| 35 | S&F floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. |
| 36 | S&F brass 4 lever type Mortice lock, vertical type, size 100 mm all as specified and directed. |
| 37 | S & F tubular curtain rails 25mm dia stainless steel 202 grade drapery type complete all as specified directed |
| 38 | S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by Engr-in-Charge at the time of execution) as directed |
| 39 | M & L in repair for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework (caging) of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 40 | M & L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 41 | M & L for preparing new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 42 | M& L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete as specified and directed by Engr-in - charge |
| 43 | Providing and laying an epoxy based colour flooring system of minimum thickness 3mm including surface preparation, primer coat, base coat, colour coat and finishing top coat with approved shade/pigment, complete all as per manufacture's specifications and direction of Engr-in-Charge. |
| 44 | Taking down cement plaster on brick/concrete surface including racking out joints hacking for key scrubbing down with water etc. |
| 45 | Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, |
| 46 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 |
| 47 | M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished fair complete all as specified and directed. |
| 48 | M&L Rendering in two layer on fair faces of brick work or concrete sur-faces of wall 5 mm thick in CM 1:4 mixed with WPC as per manufacturers instructiion for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 (WPC will be measured and paid separately). |
| 49 | M&L Rendering 5 mm thick on fair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement) |
| 50 | M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed. |
| 51 | M & L for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resitant primer all as specified and as directed. |
| 52 | M& L for preparing and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 53 | M & L for Complete removal of exiting treatment from wall and preparation of old surfaces of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of alkali resitant primer all as specified and as directed. |
| 54 | M& L for Complete removal of exiting treatment from wall and preparation of old surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 55 | M & L for complete removal of all existing treatment and providing two coats of OBD over a coat of alkali resitant primer as in ceiling all as specified and directed. |
| 56 | M & L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia, roof bands etc and making good with PCC (1:11/2; :3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required complete and applying three coat of white wash/two coat of cement base pint to match with the existing surface as directed by the Engr- in -Charge .(Reiforcement will be measured and paid saperately under respective item. |
| 57 | M&L for Providing precast cement concrete Type B1, 1:2:4 (using 20 mm Aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to matchcomplete all as specified and directed. (reinforcement shall be measured and paid separately) |
| 58 | M & L for complete removal of existing water proofing treatment including PCC tiles, plaster and concrete padding, roughening of concrete surface, cleaning and washing down the surface with water and removing debris/rubbish out side MD land complete all as specified and directed by Engr-In-Charge |
| 59 | M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 60 | M & L for brushing with neat cement slurry @ 3Kg/Sqm mixed with water proofing compound as per manufacturer instruction, and as directed by Engr-in-Charge |
| 61 | M&L for 40 mm avg thick PCC padding in cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggr mixed with WPC as per manufacturer's instructions of cement finished surface even and fair without using extra cement for laying of WPT all as specified and directed. (WPC will be measured and paid separately). |
| 62 | M & L Rendering 10 mm thick on green concrete surface of wall in cement mortar 1:4 for finished even and smooth without using extra cement complete all as specified and directed. |
| 63 | M & L for applying a layer of 3 mm thick APP modified polymeric membrane of 100 micron HMDPE outer film 20 micron having minimum weight 2.80 to 3.00 kg/sqm with 75 mm sides overlap & end overlap 100 mm over a coat of blow type bitumen confirming to IS 702-1988 grade S-35 (30/40) applied @ 1.2 Kg/Sqm over a coat of bitumen primer conforming to IS-3384 @ 0.40 ltr per sqm including one coat of alluminium paint over membrane complete all as specified and directed. |
| 64 | Supply only Internal water proofing compound (Liquid type) all as specified and directed (Dr Fixit Pidiffin/Sika or equivalent) |
| 65 | Demolition of cement concrete of any description and in any position not otherwise specifically provided. |
| 66 | M & L for 75 mm thick PCC 1:3:6 mix type C2 using 40mm graded stone aggregate as in paving finishing cone surface (plinth protection) even and smooth without using extra cement. |
| 67 | M& L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 68 | Supply and fixing 8mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specifie and directed. |
| 69 | Supply and fixing Steel rolling shutters 1.25mm thickness of laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, with gear operated type with chain wheel and hand chain, complete all as specified and directed. |
| 70 | Supply and fixing Safety lever locks mild steel with 4 levers for rollingshutters all as specified and directed. |
| 71 | Supply and fixing Ball bearing for rolling shutters |
| 72 | M&L for followings complete all as specified and directed :-(A) Surface Preparation and Concrete Removal:- (i)Removal of plaster and finishes from all sides of columns (full height), three sides of beams (full span), and bottom of slabs over specified areas, as directed by the Engineer-in-Charge.(ii) Removal of cover concrete around reinforcement (using pneumatic or electric chippers or other approved tools) until reinforcement is fully visible.(iii)Undercutting of concrete up to 20mm beyond reinforcement around the full circumference of columns and full length of reinforcement in beams/slabs as directed.(iv) Cleaning of exposed concrete surface using water jet.(v) Manual removal of rust from exposed reinforcement using hand tools.(B) Anti-Corrosive Treatment to Reinforcement:(i) Cleaning of exposed reinforcement bars (old and new) around all sides.(ii) Application of one coat of alkaline rust-converting primer as per manufacturer's recommendation.(iii) Application of two coats of epoxy phenolic anti-corrosive protective coating on all exposed reinforcement bars, including rear portions close to the concrete substrate.(C) Application of Polymer Modified Cementitious Mortar (PMM):(i) Preparation of the substrate surface (dry and free of debris).(ii) Application of epoxy bond coat using approved spray equipment, ensuring no pin holes. If pin holes are visible, apply a second coat.(iii) Application of PMM in layers totaling 30mm thickness (preferably 10mm coats), completing the work within 30 minutes.(iv) PMM shall be pre-packed and ready-to-use as per the manufacturer’s instructions.(v) Moist curing of PMM for 3 days, followed by air curing under recommended conditions.Notes:-(i) All work to be carried out in accordance with the specifications and as directed by the Engineer-in-Charge.(ii) The rates shall include all labor, materials, tools, machinery, transportation, and incidental costs.(iii) Any wastage or additional work required will be at the contractor’s expense unless otherwise directed by the Engineer. |
| 73 | M&L for use & waste of form work using steel/Hard Plywood sheets, steel bracing, propping etc around sides of columns and other structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed. |
| 74 | M&L for Providing & Pouring Micro concreting M-40 grade :-(i) Dry concrete substrate surface and free of debris & dustii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, Make : MasterEmaco S46T of BAS or equivalent in FOSROC/SIKA using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer's recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed including M&L for use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed.Note: Form work shall be 100% leak proof. The cost of micro concrete M-40 grade & Epoxy bond coat is included in this item. |
| 75 | S&F mild steel TMT bars of any dia, cut to length, bent to shape required for stengthening existing reinforcement, including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 76 | M&L for Hard drawn steel wire fabric made up of wire having min dia 2 mm weight per square meter not exc 4.0 kg, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt, complete all as specified and directed. |
| 77 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).property of being ermite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/SS dash fasteners of required dia and length all as specified and directed. |
| 78 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter with decorative laminate of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)SS screws complete all as specified and directed. |
| 79 | S & F in repairs 20mm dia brass chromium plated tubular towel rail complete. |
| 80 | S & F soap dish disc (oval) type, stainless steel chromium plated of approx size 100*50*10mm complete all as specified and directed. |
| 81 | Taking up or down 40mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 82 | S & F 40mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed. |
| 83 | S & F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed. |
| 84 | S & F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed. |
| 85 | S & F in repairs 110mm bore PVC (SWR) bends any radius all as specified and as directed. |
| 86 | S & F in repairs 110mm bore PVC (SWR) bends any radius with oval access doors all as specified and as directed. |
| 87 | S & F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed. |
| 88 | S & F in repairs 75mm bore PVC (SWR) bends any radius all as specified and as directed. |
| 89 | S & F in repairs 75mm bore PVC (SWR) bends any radius with oval access doors all as specified and as directed. |
| 90 | S & F in repair 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent all as specified and as directed. |
| 91 | S & F in repairs 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door all as specified and as directed |
| 92 | S & F in repairs 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door all as specified and as directed |
| 93 | S & F 75mm PVC (SWR) vent cowl all as specified and as directed |
| 94 | S & F in repairs 15mm bore chromium plated fancy type bib tap long body, screwed down, high pressure for iron pipe or for brass ferrule |
| 95 | S & F in repair pillar taps fancy type, cast copper alloy with casptan heads chromium plated screwed down high pressure with or without lettered Hot or Cord with long screwed shanks and fly nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and directed. |
| 96 | S & F in repairs stop valves/Angle valve15mm bore fancy type chromium plated screwed both ends for iron pipe or for unions and fixed |
| 97 | S & F in repairs stop valves/Angle valve15mm bore two way fancy type chromium plated screwed both ends for iron pipe or for unions and fixed |
| 98 | S & F in repairs 25mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed |
| 99 | S & F in repairs 20mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed |
| 100 | S & F in repairs 40mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed |
| 101 | S&F 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgf/cm2 as in waste pipe |
| 102 | Dismantling of water storage tank of 500 ltrs to 1000 ltrs capacity. |
| 103 | S & F in repair rotational moulded PVC water storage tank 1000 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type Four-layered, white coloured with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I, including S&F Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 104 | S&F in repair Vitreous china premium/ 1st quality wash down water closet Wash down water closet wall hung type EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified etc. complete including making good to floor. complete all as specified and as directed. |
| 105 | S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 106 | S&F in repairs PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC band (flush pipe) 32mm complete all as specified. |
| 107 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 108 | S & F 110mm PVC (SWR) WC connector with lip ring all as specified and as directed. |
| 109 | S & F 110mm PVC (SWR) WC connector bent type to fit WC outlet all as specified and as directed. |
| 110 | S&F in repair vitreous china counter sunk Wash hand basin, white , size 550x400 mm oval type below counter basin except taps, CP waste coupling but incl brackets all as specified. Make cera/Hindware |
| 111 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base 20mm thick in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 112 | M&L for kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar jointed with ditto as like in cement mortar (1:4) including pointing in white cement (1:2) using stone dust with admixture of pigment to match complete all as specified and directed. |
| 113 | M&L Granite 20mm thick colour as approved by Engr-in-Charge (table rubbed and polished) in platforms including cutting and nisking hole for oval wash hand basin and like in cement mortar (1:4) including pointing in white cement (1:2) using markie rusi with admixture of pigment to match with shade of granite over 15mm thick screed bed in cement mortar 1:6) complete all as specified and directed. |
| 114 | M&L for Granite 18 to 20mm thick colour as approved by Engr-in-Charge (table rubbed and polished) for wall lining veneering to wall; 12mm thick in cement mortar (1:3) including isinting in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 115 | S & F 32 mm dia stainless steel waste coupling for wash hand basin all as specified and directed. |
| 116 | S&F 40mm bore UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe |
| 117 | S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed. |
| 118 | M&L for providing and fixing 5mm thick looking mirror, fancy type, with beveled edges, of approved make, mounted on 12 mm thick commercial plywood backing, fixed to wall with suitable brass/SS screws, washers and CP dome caps, including providing chromium plated fancy type corner clamps/supports as required, complete all as specified and directed.” |
| 119 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 120 | Supply and fixing 10mm thick toughned glass as in railing, hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required all as specified and directred |
| 121 | Material and labour for removing old existing carpet flooring, cleaning the surface and fixing new fabric carpet flooring of approved make, colour and pattern, manufactured from polypropylene / nylon / polyester fibres, of thickness 6–10 mm (as specified), having anti-skid backing. Carpet shall be supplied in rolls/tiles as approved. Surface shall be cleaned, levelled and prepared before laying. Carpet to be fixed using approved grade adhesive (synthetic resin-based) including cutting, trimming, jointing to line and level, and finishing neatly at edges, doorways, and corners. Complete all as specified and directed by Engineer-in-Charge |
| 122 | Taking down existing theatre/auditorium chairs including removal of seat and back cushions, armrests and anchoring bolts, carefully dismantling from the floor without damage to the structure; cleaning of fixing area and shifting the old chairs to BSO yard. |
| 123 | Supply only theatre/auditorium chair of standard fixed type, with the following specifications:a) Seat and back made of high-density moulded PU foam (density not less than 45 ±2 kg/m³),b) Foam covered with fire-retardant upholstery fabric conforming to relevant IS standards. Chair frame made of MS tubular steel section, minimum 14–16 gauge, duly powder-coated (coating thickness not less than 50 microns). Chair supported on floor-mounted pedestal legs, fixed to floor using galvanized anchor bolts,c) Back cover and seat tray made of injection-moulded polypropylene (PP),d) Armrests made of ABS moulded plastic, smooth finish,e) Tip-up mechanism (if provided) shall be counterweight/spring auto-return type, noise-free, fasteners, alignment of rows, drilling, fixing, cutting and making good the disturbed surfaces. Complete all as specified and as directed by Engineer-in-Charge. |
| 124 | Supply and fixing in motorized recliner chair made of heavy-duty steel frame structure, fully upholstered with high-density polyurethane foam (min. 40–45 kg/m³) and premium fabric/artificial leather finish. Chair shall be equipped with quiet-operating electric motor (Noise level < 55 dB) for smooth reclining function upto 160°. Recliner to include independent footrest, armrest with cup holder, and USB charging port (5V, 2A) on one side. Chair must operate on 230V AC supply with concealed wiring and integrated control switch/panel. Seat width: 550–600 mm, overall width: 800–900 mm, seat height: 450–480 mm, with load capacity minimum 120–150 kg. Chair base to be fixed on floor using metal anchor plates, ensuring complete stability. All materials fire-retardant as per IS 15061 / ISO 8191. |
| 125 | Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, etc ( except tube light fittings), removing materials for taking credit and making good disturbed surface of wall, floors, etc complete all as directed by Eng-in-Charge. |
| 126 | M & L Point wiring complete with 1.5 sqmm single core PVC insulated (FRLS) and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC Conduit and all accessories Concealed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, withmodular white cover plate with frame for housing the switches, socket outlets, fan regulators and blank cover etc complete including cutting of chases where as required and making good all disturbed work to match the existing all as specified and as directed for the following:-(a) One light point controlled by one switch. |
| 127 | (b) One Wall fan point controlled by one switch . |
| 128 | (c) One 3 pin socket outlet 5 Amps independent board. |
| 129 | (d) One 3 pin socket outlet 5 Amps on the same board with other switch. |
| 130 | All as per above item No. 2 here-inbefore but with 2.5 sqmm PVC insulated multistranded flexible unsheathed copper conductor inclusive of 2.5 sqmm PVC insulated multistranded flexible copper conductor for one independent 6 pin 16 Amp socket. |
| 131 | S&F Modular switch, one way, 6 Amp 230, 1 module all as specified and directed by Engr in charge. |
| 132 | S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt |
| 133 | S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt . |
| 134 | S&F socket Modular 6 Amp-2/3 pin combined 2 module |
| 135 | S & F ceiling rose surface polycarbonate body three terminal. |
| 136 | S&F Modular lamp holder Polycarbonate type with back plate suitable for Batten fitting Suitable for B22 type bulb. |
| 137 | S&F EDGEPRO ROUND 22 watt natural white Slim-Fit low profile downlights are engineered to driver superior light output and uniformity utilising the latest edge-lit LED technoogy all as specified and directed. |
| 138 | Supply and fix of LED light fitting 1X20Watt, 220 Volt AC decorative box type with drivers, holders and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old unserviceable existing light fitting complete all as specified and directed. |
| 139 | Supply and fix of LED EXIT light fitting complete including taking down old unserviceable existing light fitting complete all as specified and directed. |
| 140 | Supply and fix of LED Step light fitting 1X2 Watt,220 Volt AC Flush Type complete including taking down old unserviceable existing light fitting complete all as specified and directed. |
| 141 | S&F LED bulb B22 9 watt inverter bulb ,lumin efficency 900 lumin/watt in normal mode and 350 lumin/watt in power backup mode,CRI ≥80,CCT-6500K ,surge protection upto 4KV,Voltage Protection upto 400 volt,PF ≥ 0.9 suitable for batten holder fitting complete all as specified and directed by Engr in charge.Note Warrenty on light should be of minimum 02 Years. |
| 142 | Supply and fix of LED strip light fo 50 mtr length , warm white/Natural White 25 Watt,220 Volt AC with driver Non-integral flexible LED strip light with high brightness for indoor applications complete including taking down old unserviceable existing light fitting complete all as specified and directed. |
| 143 | S & F decrotive crystal LED Jhumar 8 x 5 Watt LED Dimension (mm) Ф 1066 X 381 X 304 suspended from the ceiling and typically feature multiple light sources arranged on branches or tier with fittings complete all as specified and directed. |
| 144 | S&F Indoor Architectural LED Light 10 watt ,lumin efficency 900 lumin/watt ,CRI ≥80,CCT-6500K ,surge protection upto 4KV,Voltage Protection upto 400 volt,PF ≥ 0.9 complete all as specified and directed by Engr in charge.Note Warrenty on light should be of minimum 02 Years. |
| 145 | Taking down andsupply and fixing wall Mounted Fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, 50Hz, RPM 1200, copper winding of sweep 300mm including cutting of suitable size holes on existing wall and making good disturbed work to match the existing surfaces and exhaust fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 146 | Supply and fix 100 Watt LED flood light new generation energy saving and environmental friendly, long life, exclusive innovative die-cast aluminium IP65 protection and IK07 with 10KV Built-in-Surge Protection Device ,lumens should be ≥ 120 lm/w ,OEM driver ,PF 0.9,CCT 5700K flood light,suitable for highlighting architectural facade and general purpose lighting Note :- The warranty on light should be of minnimum 2 Years . |
| 147 | Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.Note : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length. |
| 148 | Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.Note : Two runs of single core 6.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length. |
| 149 | S&F double door metallic sheet metal enclosure VTPN DB with provision for housing 63 amp MCCB as incomer 4 Way with 200 Amps rated bus bars. |
| 150 | Taking down and Supplied & fixed MCBs DB TPN 4 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V complete all as directed by Engr-incharge. |
| 151 | S & F sheet metal enclosures (double door) for DBs where MCBs to be used single pole and neutral 8 way 240 V with 200 amps rated bus bar fixed on wall complete with all acessories including taking down old unserviceable MCB DB with MCBs complete all as specified and directed |
| 152 | S & F sheet metal enclosures (double door) for DBs where MCBs to be used single pole and neutral 4 way 240 V with 200 amps rated bus bar fixed on wall complete with all acessories including taking down old unserviceable MCB DB with MCBs complete all as specified and directed |
| 153 | S&F MCCB 63 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs all as specified and directed. . |
| 154 | S & F MCB Triple pole (TP), having rupturing 10KA, 240/415 V 25 to 63 amps as ordered. |
| 155 | S & F MCB single pole, having rupturing 10KA, 6 amps to 32 amps as ordered 240 Volts |
| 156 | S & F MCB Single pole and neutral (SPN), having rupturing 10KA, 240 V 63 amps as ordered. |
| 157 | S & F MCB Triple pole and neutral (TPN), having rupturing 10KA, 240/415 V 63 amps as ordered. |
| 158 | M&L for duct insulation with resin bonded fibre glass wool roll of density 24 kg/Cum, withfactory laminated aluminium vapour barrier, thickness of 25 mm insulation as specified and including the following:- (a) M&L for cleaning the duct surface (to be nsulated ) by scrapping carefully with wire brush etc. to make the surface completely free of millscale, dirt, dust, grease and other foreign materials, taking special care so that all duct joints are sealed against any leakage. (b) M&L for applying rubber based adhesive CPRX compound. (c) M&L for sealing of all longitudinal joints and circular overlaps with and including Aluminium foil tape 50 mm wide, to make the insulation leakproof. (d) M & L for securing the insulation with and including mechanically fastened nylon/steel straps of size 12 mm/50 mm at maximum intervals of 1.2 mtr |
| 159 | Supply, Assembly and Erection of GI sheet with TDF flange rectangular/square duct made out of L shaped hallowed profile, duly factory boxed, incl all accessories such as corner, cleat, carriage bolt gasket and appropriate sealant on longitudinal joints etc complete of size 22 guage. |
| 160 | S & F of LED street light fitting 35 Watt 230 V AC CCT 5700K Lumens ≥100 lm/watt outdoor type with high pressure die cast Aluminium housing high power led as lighting source and lens embedded pc cover having top opening seperate driver compantment and impact resistance of IK 07 WITH 10KV,OEM driver,PF 0.9, built in surge protection device heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection . including bracket made out of GI pipe light grade 32mm bore not less than 1.20m long bent to shape required fixed to pole with suitable size 2 Nos clamps made out of 25X3mm flat iron with nut, bolts and washers complete complete all as specified and directed.Note :- The warranty on light should be minnimum of 2 Years . |
| 161 | Taking down existing earthing and M & L Earthing complete with galvanised steel earth plate electrode, 60x60cmx 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level,connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 162 | NOTE : SCHEDULE OF CREDIT (Amount on page No 51 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance.) Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
