|
| 1 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (without taking off shutters from the frame) all as specified and directed. |
| 2 | Taking down Chowkats or frames exceeding 1.5 Sqm each but not exdeeding 4 Sqm each(without taking off shutters from the frame) complete all as specified and as directed. |
| 3 | Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] Note: The unit rate quoted by contractor shall be excluding of provn of glass and includes all other connected accessories. Net opening will be measured for payment purpose complete all as specified and as directed. Glass shall be measured and paid separately. |
| 4 | Providing and fixing factory made uPVC white colour casement (Openable) window n.exceeding 1 Sqm made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. Note: The unit rate quoted by contractor shall be excluding of provn of glass and includes all other connected accessories. Net opening will be measured for payment purpose complete all as specified and as directed. Glass shall be measured and paid separately. |
| 5 | Providing and fixing factory made uPVG white colour Sliding window Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: The unit rate quoted by contractor shall be excluding of provn of glass and includes all other connected accessories. Net opening will be measured for payment purpose complete all as specified and as directed. Glass shall be measured and paid separately. |
| 6 | All as per serial item No. 5.00 here in above but exceeding 2 Sqm each all as specified and directed. |
| 7 | M&L For Figured glass 6mm thick , pin head type and glazing in squares n exc 0.5 sq. m in each pane all as specified and directed. |
| 8 | M&L For Figured glass 6mm thick , pin head type and glazing in squares exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 9 | M&L for applying silicon sealent to UPVC door/ windows wall, frame junctions complete all as specified and directed by Engr in charge. |
| 10 | M&L for cutting holes in brick walls for inserting holdfasts and making good dismantled portion by filling cement mortar (1:3) or concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) exc half brick thick but not exc. one brick complete all as specified and as directed. |
| 11 | M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and as directed. |
| 12 | S&F for MS work of flat iron of size 30mm x 6mm thickness as in hold fast, confirming to Fe-410-0 (Grade-E-250 Quality-A) complete all as specified and as directed. |
| 13 | S & F flush shutters 18-19 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides for cup board and similar work complete all as specified and as directed. |
| 14 | S&F 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. |
| 15 | S & F for glazed and Skelton shutters 30mm thick of 2nd class hardwood,open rebated and prepared to receive glass, guaze etc (Without Sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc;sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); suppplied and fitted to chowkats complete all as specified and as directed. |
| 16 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, and edges will be painted to match with printed sheet fixed in opening as per specification and drawings complete all as spcified and as directed. |
| 17 | Supply and fixed Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed. |
| 18 | S & F MS Helical door spring 300mm long tail pattern conforming to IS-452-1975 complete all as specified and directed. |
| 19 | S&F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 20 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and as directed. |
| 21 | S&F for butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type C-21 complete all as specified and as directed. |
| 22 | S&F MS butt hinges of size 75mm long, medium weight, cold rolled complete all as specified and as directed. |
| 23 | S&F for Aluminium handles of size 150mm, cast type, anodised complete all as specified and as directed. |
| 24 | S&F for 125mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 25 | S&F for 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 26 | S&F for 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 27 | M & L for applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as directed. |
| 28 | Demolition of cement concrete, (reinforced) Roofs, floors (other than ground floors), beams, staircases, Landing, chajjas and similar suspended work of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 29 | Dismantling water tanks exc. 250 litres and not exc. 500 litres capacity and removal from site complete all as specified and as directed. |
| 30 | S&F for 500 litres capacity triple layered (ISI Marked) rotational moulded polyethylene water storage tank (cylindrical/vertical with closed top), hoisted and fixed in position complete all as specified and as directed |
| 31 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 32 | M&L for non skid ceramic designer coloured tiles 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 33 | M&L for glazed ceramic coloured tiles 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick as on vertical surfaces such as dado, skirtings, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick rendering screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 34 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4) 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm tiles center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 35 | Dismantling of stone slabs and tiles of any description or thickness in floors, steps, jambs, pillars, window cills, cooking plat forms,aprons etc including cement mortar bedding and rubbish off the premises complete all as specified and directed by Engr-In-Charge. |
| 36 | S&F 20 mm thick granite slab in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl grinding and polishing over and including 20mm screed bed in CM(1:6) completed all as directed. |
| 37 | S&F as in repairs sink with drainage board, made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, making holes in walls for brackets and fixed in CM (1:3) or PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) including taking down old unserviceable sink complete all as specified and as directed. |
| 38 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern) white with ‘P’ or ‘S” trap, plastic seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device including connection to outgoing pipe & to flushing pipe, anti-syphonage pipe etc as in repairs (excuding flushing cistern and flush pipe) complete all as specified and as directed. |
| 39 | S&F as in repairs 10 litres capacity PVC valveless symphonic action type low level flushing cistern including 32mm dia PVC flush pipe connected to WC with inlet, ball valve, float and handle lever and fixing on walls with bracket including 15mm pvc connection pipe complete all as specified and as directed. |
| 40 | S&F as in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm including a pair of cast iron cantilever brackets of size 40x40x5mm with and including 32mm dia PVC waste pipe and 32mm dia waste coupling, chromium plated brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 41 | S&F as in repairs PVC connection 450mm long suitable for 15mm bore GI pipe including PTMT nuts on both sides complete all as specified and as directed. |
| 42 | S&F as in repairs 15mm dia pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 43 | S&F as in repairs grating square 150 mm size of PTMT (Minimum weight 100gms) and fixed complete all as specified and as directed. |
| 44 | Taking out old existing treatment of any thick and any position of RCC roof by scrapping, scrubbing, brooming down, etc. complete all as specified and as directed. |
| 45 | M&L for 40mm average thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in roof padding, etc finished surface even and fair without using extra cement complete all as specified and as directed. |
| 46 | M&L for preparation and cleaned to plastered/ concrete surfaces of roof and applying the under mentioned course of roof treatment as given below :-(a) Applying evenly compatable primer @ 0.4 litre per Sq.m over concrete/plastered roof surface(b) Applying a tack coat of industrial bitumen 85/25 grade (ISI marked) @ 1.2kg/Sqm(c) Laying of 3mm thick membrane sheet of weight not less than 3.6 kg/Sq.m with minimum longitudinal end over laps of 100mm and horizontal side laps of 75mm and joints finally thermo-fused with help of LPG flames. Membrane sheet laid over a tack of industrial bitumen 85/25 as specified here-in before. |
| 47 | Taking down cement plaster or cement lime plaster on PCC/stone surfaces or brick surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 48 | M&L for 15mm thick rendering in cement mortar (1:6) on faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified and as directed. |
| 49 | M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar (1:4), mixed with WPC @ 3% by weight of cement consumed or as per manufacturer's instruction and finished the surface even and smooth without using extra cement for sunken slab, etc. complete all as specified and as directed.Note : WPC shall be mesured and paid separately here-in-after. |
| 50 | M&L for 5 mm thick rendering on ceilings in cement mortar 1:4 and finishing the surface even and smooth without using extra cement complete all as specified. |
| 51 | Supply only Integral waterproofing compound (ISI marked), best quality complete all as specified and as directed. |
| 52 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over and including one coat of alkali resistant primer complete all as specified and as directed. |
| 53 | M&L for applying 3mm thick water proof wall care putty complete all as specified and as directed. |
| 54 | M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 55 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots, etc. on walls complete all as specified and as directed. |
| 56 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 57 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulsion distemper (OBD) of approved shade/tint complete all as specified and as directed. |
| 58 | Taking down carefully old point wiring (light, fan, socket, bell point or power point) complete including unserviceable fixtures like switches sockets, holders, ceiling roses etc removing from site and keeping in safe custody for taking credit and making good disturbed surfaces of wall /ceiling with cement plaster in cement mortar (1:6) and distempering / white washing to match the existing surface complete all as specified & directed. |
| 59 | Taking down carefully old u/s fittings like FTL, PL, CFL, LED luminaires removing from site and keeping the unserviceable fixtures etc in safe custody for taking credit and making good disturbed surfaces of wall /ceiling with cement plaster in cement mortar (1:6) and distempering / white washing to match the existing surface complete all as specified & directed. |
| 60 | Taking down old u/s Empty Box / Bus Bar Chamber / DB’s of any capacity with MCCB's or MCB fixed on wall and making good disturbed surfaces of wall / floor with cement plaster in cement mortar (1:6) and distempering / white washing to match the existing surface complete all as specified & directed. |
| 61 | M&L for point wiring for light point with 1.5 Sqmm PVC FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC Casing & Caping of size not less than 25 x 12mm / 32 x 12mm suitable as per site reqmt, ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, screws, gutti / roul plugs PVC all as per site requirements including plastic terminal boxes for mounting of switches/ sockets/regulator etc and PVC FRLS insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase - Red/Yellow/Blue, Neutral – Black, and Earth – Green including testig on completion complete all as specified and directed by Engr-in-Charge |
| 62 | One light point point controlled by one no one way 6 Amps switch complete. |
| 63 | One fan/exhaust fan point controlled by one no one way 6 Amps switch complete. |
| 64 | One calling bell point controlled by one no 5 Amps bell push switch complete. |
| 65 | One 6 Amps socket outlet point on the same board with other switches complete |
| 66 | One 6 Amps switch socket combination point on independent board complete |
| 67 | All as per item No. 61.00 here in above but with One light point controlled by two 2 - way switches , with cables 1.5 sq. mm size all as directed. |
| 68 | All as per item No. 61.00 here-in-before but with two single core PVC insulated unsheathed multi stranded copper conductor cable (FRLSH) of size 4 Sqmm 1100 volts grade and one single core PVC insulated unsheathed multistranded copper conductor (FRLSH) of size 4 Sqmm 1100 Volts grade as earth continuity conductor (as per colour code) including PVC concealed conduit (medium grade) including cutting of chases as required of suitable size with all accessories such as bend, elbow, tee etc for 15 Amps switch socket combination point on independent board complete all as specified and directed. |
| 69 | S&F switch piano flush type single pole one way (ISI Marked), 6 Amp, AC,230 V all as specified and directed. |
| 70 | S&F switch piano flush type single pole two way (ISI Marked), 6 Amp, AC,230 V all as specified and directed. |
| 71 | S&F bell push flush type (ISI Marked), 6 Amp, AC,230 V all as specified and directed. |
| 72 | S&F socket outlet flush type 2 in 1, 6A, AC, 230V complete all as specified and directed. |
| 73 | S&F switch & socket combination flush type 2 in 1, 6A, AC, 230V complete all as specified and directed. |
| 74 | S&F switch socket combination flush type 5 in 1, 6 Pin, 6A/16 Amp, AC, 230V with four fixing holes complete all as specified and directed. |
| 75 | S&F rotary step deluxe electronic fan regulator flush type 2 module, 100 W, 230 V AC complete all as specified and directed. |
| 76 | S&F Calling Bell Ding Dong Type AC, 230V complete all as specified and directed. |
| 77 | Supply and fixing of surface mounted batten type, slim LED luminaires 10 W, 220 - 240 V AC, 50 Hz, IP 20 with aluminium extruded housing, polycarbonate diffuser & end caps, minimum efficacy 100 lumens/watt with 120 degree viewing angle, CCT 6500, CRI ≥ 80, power factor ≥0.9, IP 20, surge protection 4.0 KV, THD < 20% integral electronic driver with short circuit protection and open circuit protection, surge voltage protection complete all as specified and directed. |
| 78 | Supply & fixing of surface mounted batten type, slim LED luminaires 20 W, 220 - 240 V AC, 50 Hz, IP 20 with aluminium extruded housing, polycarbonate diffuser & end caps, minimum efficacy 100 lumens/watt with 120 degree viewing angle, CCT 6500, CRI ≥ 80, power factor ≥0.9, IP 20, surge protection 4.0 KV, THD < 20% integral electronic driver with short circuit protection and open circuit protection, surge voltage protection complete all as specified and directed. |
| 79 | Supply and fixing 10 watt LED Bulk Head IP 66 fitting Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs including connecting up with three core flexible copper conductor cable of suitable size complete.Make Havells HEXA 10 W - IP66 Cat No HEXAFT10WLED857SSYMBOPC or equivalent of Philips/ C&G or as approved. |
| 80 | Supply and fixing in repair Street Lights 50W LED Fitting with best in class design & Robust heat sink along with class leading IP, IK & Surge protections for long lasting performance comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 40 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed. |
| 81 | S&F of ceiling rose 3 pin PVC polycarbonate, isolated body complete all as specified and directed |
| 82 | S&F MCB DB made of sheet steel , powder painted with NUTRAL Copper bus bar 100 A, neutral link, earth bar and Din rail ,240Volts SPN with 8 way Double door , IP-54-IK09 protection grade all as directed. |
| 83 | S&F MCCB DB VERTCLE TYPE made of sheet steel , powder painted with NUTRAL bus bar 250 A, neutral link, IP-54 IK09 protection grade , 415Volts TPN with 4 way Double door all as specified and directed. |
| 84 | BLANK |
| 85 | Supply & fix in repair of MCBs SPN 32 Amps with 10 KA breaking capacity of 'C' series confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and directed. |
| 86 | Supply & fix in repair of MCBs SP 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and directed. |
| 87 | Supply & fix in repair of MCBs SP 40 Amps with 10 KA breaking capacity of 'C' series in distribution boards confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and directed. |
| 88 | Supply and fixing MCCB TPN 100 Amps , 415Volts, 25KA ,4 POLE LEGRAND CAT NO-420055 / equivalent of L&T/ABB |
| 89 | Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces all as directed. |
| 90 | M&L for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC CASING CAPING not less then 32 mm dia medium Grade fixed on walls/ roof/ floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 6 sqmm for phase and neutral and one wire of 6 sqmm for eatrh continuty and one run of PVC casing/caping shall be measured as one unit. |
| 91 | Supply and fix electric water heater, storage type steel body with heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, 15A 3 Pin Top Plug including 24\\" 02 Nos connection pipe made out of SS 304 grade, leak proof, heat resistant type, including fixing of geyer on wall with the help of 02 Nos anchor fasteners of suitable size and testing on completion complete all as specified and directed by Engr-in-Charge. |
| 92 | S&F galvanized steel tubes of 15 mm bore medium grade including all fittings (such as bends, elbows, tees, short pieces, connectors,tank connectors, backnuts, diminishing pieces, plugs, unions & flanges etc.) and fixed complete to surfaces through MS clamp complete (as required) all as specified and directed by Engr-in-Charge. |
| 93 | S & F Bib tap of 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed by Engr-in-Charge |
| 94 | M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. Note: The rate quoted shall inclusive of excavation, GI wire 4mm dia with GI pipe protection 15 mm, light grade up to 7.5mm) |
| 95 | Taking down carefully ceiling/exhaust fan of any sweep complete with all accessories, dismantling blades and kept in safe custody and refixing, the same rehanging and connecting with provn of 3 core copper flexible cable of size 1.5 Sqmm from ceiling rose to fan complete all as specified & directed by Engr-in-Charge. Note : The work is required to facilitate for painting work in buildings Please Enable Macros to View BoQ information |
