|
| 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth to a distance up to 50m. Including all lifts with levelling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design & building specification and direction of E / I .(5.1.1. BCD ) |
| 2 | Extra for earth work in hard soil as per specification and direction of E/I (vide classification of soil item) - ( 5.1.2 BCD) |
| 3 | Providing coarse clean sand filling in foundation trenches and plinth including ramming and watering in layers not exceeding 150mm thick with all leads & lifts including the cost of all materials, labour, royality, & taxes all complete as per building specification and direction of E/I (5.1.10 BCD) |
| 4 | Providing designation 75B one brick flat soling joints filled with local sand including the cost of watering taxes royality all complete as per building specification and direction of E/I..(5.6.3 BCD) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to Plinth Level 1:2:4 (1 cement : 2 coarse sand (zone -III) : 4 graded stone aggregate 20 mm nominal size )( B.C.D- 5.3.1.2) |
| 6 | Providing designation 75 B brick work in C.M. (1:6) in Superstructure and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. (5.2.6.BCD) |
| 7 | Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.(5.2.14 BCD) |
| 8 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin-Charge.80mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern.D.S.R. Item No. 16.91.2 |
| 9 | Providing R.C.C. M-200 with nominal mix (1:1.5:3) in foundation with approved quality of stane chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 Excluding screeing, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.(5.3.9.1 BCD) |
| 10 | Providing and laying in position specified grade of reinforced cement concrete in columns ,excluding the cost of centering ,shuttering , finishing and reinforcement -All work above plinth level up to floor five level.1:1.5:3(1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size). (5.3.10 BCD) |
| 11 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheet complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m². (12.1.3 DSR) |
| 12 | Supplying G.I. pipes (TATA Mark) or equivalent as per IS-1239 (Part-01)/2004 ISI Marked / Medium Quality - 65mm. (M-930 K DWSD) |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarsesand(zone-III) : 3 graded stone aggregate 20 mm nominal size).(5.3.11 BCD) |
| 14 | Centering and shuttering including strutting, propping etc and removal of form for Foundations, footings, bases of caloumns etc., for mass concrete.( 5.3.17.1 BCD) |
| 15 | Centering and shuttering including strutting, propping etc and removal of form for Columns.(5.3.17.6 BCD) |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, Beams, Plinth beams, girder, bressumers and cantilevers.(5.3.17.5 BCD) |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors Roof, landing, balcony and access platform .(5.3.17.3 BCD) |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral staircases.(5.3.17.7 BCD) |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, chajjas , corbels etc, including edges.(5.3.17.19 BCD) |
| 20 | Supplying, fitting and fixing 20 guage G.C.I sheet gate fitted on M.S. Angle frame of size 60x60x6 mm including cost of fabrication, providing necessary locking arragement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. (5.5.29 BCD) |
| 21 | Providing Tor steel reinforcement 8mm dia. rod as per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position( excluding carriage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for Tata (Tiscon),Sail.JSPL,Electrosteel steels Ltd.Bokaro and Vizag (RINL)) (5.5.4 BCD) |
| 22 | Providing Tor steel reinforcement 10mm,12mm &16mm dia. rod as per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position( excluding carriage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for Tata (Tiscon),Sail.JSPL,Electrosteel steels Ltd.Bokaro and Vizag (RINL)) (5.5.5 (a) BCD) |
| 23 | Providing Tor steel reinforcement 10mm,12mm &16mm dia. rod as per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position( excluding carriage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for Tata (Tiscon),Sail.JSPL,Electrosteel steels Ltd.Bokaro and Vizag (RINL)) (5.5.5 (b & c) BCD) |
| 24 | Supply Fitting And Fixing MS grill with ms grills made of 20x6 mm ms flat/square bar as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.(where material is not supplied by deppt.) (5.5.12 BCD) |
| 25 | Providing and fixing fan hook of 16 mm dia M.S. bar 1 Meter long bent to required size and shape , placed in position and fixed in R.C.C. slab / beam at the time of casting all complete as per building specification and direction of E/I. (5.5.13 BCD) |
| 26 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement sluryflush pointed with white cement including rubbing, polishing and cost of curing taxes, and all royality complete as per building specification and direction of E/I.With Commercial grade colour tiles (B.C.D 5.6.23.4) |
| 27 | Providing and laying doublecharge vitrified floor tiles in different size ( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622/ISO 13006 of approved make in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc, size of tiles 600mm X 600mm.(5.6.28 BCD) |
| 28 | Providing 12 mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 1.5 mm cement punning including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. (5.7.1 BCD) |
| 29 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building soecification and direction of E/I. (5.7.11 BCD) |
| 30 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.( 5.7.6 BCD) |
| 31 | Provinding 12 mm thick water proof cement plaster (1:6) with clean sand of F.M 1.4 including, screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. (5.7.3 BCD) |
| 32 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding , washing of floors and taxes all complete as per specification and direction of E/I.(B.C.D. 5.8.18) |
| 33 | Providing primer one coat of red lead paint painting with ready mixed paint of approved shade and make new steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all comple as per building specification and direction of E/I. (5.8.41 BCD) |
| 34 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, Area of slab over 0.50 sqm. (D.S.R. 8.2.2.2) |
| 35 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper,applying putty wherever required,scaffolding including washing, cleaning and preparing the walls,scaffolding , washing of floors and taxes all complete as per specification and direction of E/I.(B.C.D. 5.8.21) |
| 36 | Finishing walls with Acrylic smooth exterior paint of required shade new work (two or more coat applied @ 1.67ltr/10sqm over and including priming coat of exterior primer applied @0.90kg/10sqm) .(13.46.1 D.S.R) |
| 37 | Providing two coats of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all comple as per building specification and direction of E/I. (5.8.43 BCD ) |
| 38 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all comple as per building specification and direction of E/I. (5.8.45 BCD ) |
| 39 | Welder Grade-I . (P.NO-49, S.NO-41 BCD) |
| 40 | Providind two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and preparring the walls,scafolding,washing of floor and taxes all complete as per building specification and direction of E/I.(5.8.20 BCD) |
| 41 | Providing Angle as per IS 226 75X75X8 mm (Gr A). BCD (M- 195 3 (b) (iii)) |
| 42 | Providing Barbed wire for fencing - 4 point, 2ply, 12 SWG, 150mm Apart (M 215 BCD) |
| 43 | Labour for fitting and fixing barbed wire fencning in 4 rows horizontal upto a height of 1.25m and two diagonals including fixing of post in cement concrete at 2.5m centres including cost of staples(but excluding the cost of cement concrete angle iron post, its cutting and making holes, nuts and bolts) all complete as per building specification and direction of E/I.(5.5.21 BCD) |
| 44 | Providing and fixing concentina coil fencening with punched tape concentina coil 600mm dia 10m openable length ( total length 90m) having 50 nos. rounds per six metre length upto 3m height of wall with existing angle iron Y shaped placed 2.4 m or 3m appart and with 9m horizontal R.B.T reinforced barbed wire stud tied with GI staples and clips to retain horizontal, including necessary bolts or GI barbed wire tied to angle iron, all complete as per direction of Eengineer in charge with reinforced barbed tape(R.B.T )/spring core(2.5mm thick) wire of high tensile strength of 165kg/sqmm with tape(0.52 mm thick) and weight 43.478gm/m(cost of MS angle, C.C blocks shall be paid saperatly)(DSR 16.53) |
| 45 | Labour (P.no 47 BCD) |
| 46 | Taking down old door and window shutters including stacking serviceable material within 15m lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. (BCD 5.10.10) |
| 47 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. (BCD 5.10.1) |
| 48 | Dismantling R.C.C work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. (BCD 5.10.3) |
| 49 | Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. (BCD 5.10.2) |
| 50 | Painter class-ll.(P.NO-47 BCD) |
| 51 | Paint (M-64, P.NO-53 BCD) |
| 52 | Providing and applying Thermoflex P-111 /Sika Coolcoat or any other Equivalent compound on Roofs of Slab as per following procedure- (i) Surface prepration :- Surface of roof slab should be cleaned with wire brush. Dust particles should be removed and surface should be washed with high water pressure and should be get dried. (ii) Primer Coat :- Thermoflex P-111 should be dilluted with portable water in 1:1 ratio and this solution should be applied on cleaned and dry surface with soft brush/ roller. (iii) 1st coat of p-111 :- After 3 hours of primer coat first coat of P-111 (without any dilution ) should be applied with soft brushor roller. (iv) When the first coat is partially dry an acrylic fibremess 80 GSM mat should be laid over it and pressed with roller. (v) Second /Final coat :- 2nd coat of P-111 ( without any dilution) should be applied after 3 hours of 1st coat of application. It should be allowed to dry for 4 hours. (5.12.10 BCD) |
| 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per dirction of Engineer In charge. concealed work,including cutting chases and making good the walls etc. 15mm nominal dia pipes. (18.8.1 DSR) |
| 54 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per dirction of Engineer In charge. concealed work,including cutting chases and making good the walls etc. 20mm nominal dia pipes. (18.8.2 DSR) |
| 55 | Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I brakets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required.(610x510 mm bowl depth 200mm).(17.10.2.1 DSR) |
| 56 | Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts fasteners etc). (10.28 DSR) |
| 57 | Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I \\"p\\" trap 15 liters C.I. or C. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings. C.I or C.C brackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.(C)450mm long withI.W.C (c)12.50 litre low level P.V.C. cistern (DWSD 3.2.1) |
| 58 | Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. (DWSD 3.2.5 ) |
| 59 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (weight not less than 350 gms.) with extra socket all complete as per specification and direction of E/l. (DWSD 3.1.5.1) |
| 60 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size PVC/M.S. etc as required. Group A (1.1.1 Energy) |
| 61 | Wiring for ckt /submain wiring along with earth wire with the following size of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit As requied.(2x 1.5 sq mm + 1 x 1.5 sq mm earth wire) (1.7.1 Energy) |
| 62 | Wiring for ckt /submain wiring along with earth wire with the following size of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit As requied. (2X 10 sq mm + 1x6 sq mm earth wire). (1.7.5 Energy) |
| 63 | Supplying and fixing 2 pin , 5 amp ceiling rose on the existing junction box/ wooden block including connection etc. as required. (1.33 Energy) |
| 64 | Supplying and fixing brass batten/ angle holder including etc as required. (1.34 Energy) |
| 65 | Providing and fixing following capacity TP&N disconnector fuse switch unit in existing metal board with rewireable type fuse, including drilling holes in metal board making connections. etc as required. 63 amp Double pole. (2.1.3 Energy) |
| 66 | Earthing with G.I. pipe 4.5 metre long 40 mm dia including accessories, and providing masonry enclosure with cover plate having arrangement and watering pipe etc. with charcoal and salt as required. (3.2 Energy) |
| 67 | Providing and fixing 25mm x 5mm G.I strip in 40 mm dia. G.I pipe from earth elctrode,including connection with G.I nut,bolts, spring,washer, excavation and re-filling etc. as required (3.9 Energy) |
| 68 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75mm x 75mm x 50mm deep/ (4\\"x4\\") (Energy 1.22.1) |
| 69 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.121mm x 173mm x 48mm deep/ (6\\"x8\\") (Energy 1.22.6) |
| 70 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.170mm x 221mm x 48mm deep/ (8\\"x10\\") (Energy 1.22.8) |
| 71 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.210mm x 206mm x 48mm deep/ (10\\"x12\\") (Energy 1.22.9) |
| 72 | Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 amps one way switch (1.24.1 Energy) |
| 73 | Supplying and fixing following rating , double pole,240 voltss, isolate in the existing MCB DB complete with connection, testing and commissioning etc as required. 63 amps (2.14.2 Energy) |
| 74 | Supplying and fixing of following size of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit are required. (25 mm) (1.21.2 Energy) |
| 75 | Supplying and fixing steped type electronic fan regulator on the existing modular plate and switch box including connections but excluding modular plate etc as required. (1.25 Energy) |
| 76 | Supplying and fixing following modular switch/socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 amps 3 pin socket outlet (1.24.4 Energy) |
| 77 | Electrician Grade 1.(P.NO-49,S.NO-58 ENERGY) |
| 78 | 200AH tubular lead acid baterry with 36 month replacement guaranty. IS 1652:1991.( M-1536 Energy) |
| 79 | Trolly for single tubular battery.( M-1531 Energy) |
| 80 | 1100-1200 VA sine wave inverter input AC range-100 - 300V AC, wide - 90V-300V AC, standard -180V- 260V AC, DC range -10.5 to 14.2, efficiency - 80%, protection - Overload, short-circuit.(M-1525 Energy) |
| 81 | LED Flood Light 120 W.(M-849 ENERGY) |
| 82 | Supplying and fixing of ceiling fan - 48\\" (1200mm BLDC 5 star IS 374: 2019 )dia.(M-779 Energy) |
| 83 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.(1.44 Energy) |
| 84 | 1 X 28 watt T5 tubelight fitting.(M-865 Energy) |
| 85 | Supplying, filling, spreading & leveling stone boulder of size range 5 cm to 20cm , in recharge pit, in the required thickness, for all leads & lifts all complete as per direcction of E/I(23.5 DSR) |
| 86 | Supplying, filling, spreading & leveling stone boulder of size range 5 cm to 20cm , in recharge pit, in the required thickness, for all leads & lifts all complete as per direcction of E/I.(23.6 DSR) |
| 87 | Supplying, filling, spreading & leveling coarge sand of size range 1.5 mm to 2mm , in recharge pit, in the required thickness, for all leads & lifts all complete as per direcction of E/I.(23.7 DSR) |
| 88 | Cost of drilling 200mm x 165mmx100mm deep bore well in all kinds of soil and rock in rural area for installation of pump set with DTH rig all complete including supplying all materials labours,tools,drilling rig, air compressor and equipment as well as fuel, lubricant for making boring and cost of transporting/chargees ofrig machine & other vehicles up to site of the work as per specification and direction ofE/I.UP to 50 m below G.L.(M-1035 DWSD) |
| 89 | Cost of drilling 200mm x 165mmx100mm deep bore well in all kinds of soil and rock in rural area for installation of pump set with DTH rig all complete including supplying all materials labours,tools,drilling rig, air compressor and equipment as well as fuel, lubricant for making boring and cost of transporting/chargees ofrig machine & other vehicles up to site of the work as per specification and direction ofE/I.50 M TO 125 M (M-1035 DWSD) |
| 90 | Supplying all tools, tackles & lowering of 200mm dia M.S. ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job (Basic rates).(1036 DWSD) |
| 91 | Supplying fitting and fixing flat back or angular lipped front vitreous white glazed earthen ware urinal of \\"Hindustan \\"Parrry\\" or any other approved I.S.S make with 5 liters capacity C.I automatic fulsing cistern of reliance for any other I.S.S approved make with all fitting with C.I or R.S brackets,standard size G.I flush pipe with fitting clamps, 15 mm C.I body brass spindle stop cock of approved quality weight not less than 400 grams, 15m P.V.C/ Allthene pipe 450 mm longwith brass coupling at both ends and doing piumber joints including painting of exposed part with two coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/I.(a) Flat back or standing corner (600mm x 350 mm).(3.2.3.(a) DWSD) |
| 92 | Supplying fitting and fixing the following items complete with all materials as per specification and direction of E/I. (b) Mirrors of 6 mm thick plate glass bevelled edge mirror including C.P. brass revolving fitting 3 mm ply wood board and C.P hinges to fix with mirror. (i) 600 mm x 450 mm size. (3.1.21 (b)(i) DWSD) |
| 93 | Supplying fitting and fixing the following items complete with all materials as per specification and direction of E/I. (c)(ii)C.P brass dish container medium quality with screw and hings etc. (3.1.21 (c)(ii) DWSD) |
| 94 | Polythene water storage tank of mark with cover and suitable locking system in double layer confirming to IS:12701-1996 with latest revision.(M079 P.No-103 DWSD) |
| 95 | Supplying, assembling, lowering and fixing in vertical Position in bore well, unplasticized PVC medium well Casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as perdirection of Engineer-in-charge. 200mm nominal size dia 200 mm (DSR 23.3.3) |
| 96 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189 to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor, rinning the compressor for required time till well fully developed, measuring yield of well by\\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disunfection of tubewell, all complete including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of engineer-in-charge.(DSR 23.12) |
| 97 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of borewell housing /casing pipe, removable as per requirements, all complete for borewell of 200mm dia.(DSR 23.13.3) |
| 98 | Providing and fixing M.S clamp of required dia to the top of casing/ housing pipe of tubewell as per IS:2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp(23.14.3) |
| 99 | Supplying submersible pump sets confirming toIS 8034 and motor confirming to IS 9283.Pumo shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415 + 10%.3PH, 50Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufactures design. Anti thrust sytrem lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double rin shall be provided with each pump. Submersible pump set 100 mm dia ( with Polypropylene/ Noryl Impeller) up to 20 stages .1.5 H.P(DWSD M 1055) |
| 100 | D.O.L starter with SS Enclosure with 380/415 Volt coil . 5 to 10 H.P.(DWSD M 1065) |
| 101 | Supplying and fixing of holder type LED 9/10 wat t ( ENERGY M-855) |
| 102 | 3 core 2.5 sqmm FR pvc insulated copper wire.( M-1906 P.No-54 Energy) |
| 103 | Providing and fixing G.I pipes complete with G.I fittings including trenching and refilling etc.External work 32mm dia nominal bore (18.12.14 DSR) |
| 104 | CARRIAGE OF MATERIAL CEMENT |
| 105 | Sand - |
| 106 | Stone Chips - |
| 107 | Bricks - |
| 108 | Goods & Services Tax (G.S.T.) - 18% |
| 109 | Labour Cess - 1% Please Enable Macros to View BoQ information |
