|
| 1 | Supplying , Erection , testing and commissioning of Electrically driven horizontal split casing pumps for delivering 91 LPS each (328 m3/ hour) raw water against a Head of 12 meter along with suitable size driving motor ( 25 HP ) for delievering the above mentioned discharge and head , including cost of foundation bolts, flexible coupling & coupling guard, tappers & other contingent material fixed in position complete in all respects. Make of Pumps : Mather & Platt (WILO)/ Kirloskar / KSB/BHEL / Grundfos OR Equivalent make. Make of Motor: Crompton/ABB/ Kirloskar / Siemens/BHEL/Marathon OR Equivalent make (2W+1SB) complete in all respect as per satisfaction of Engineer in-charge |
| 2 | Supplying, Installing, Testing, commissioning of 3 phase 4 wire main incomer panel and fuse unit, 250 A, 4 pole , 35 KA microprocessor based MCCB having IP 54 protection with indicating lamps , voltmeter, ammeter , suitable size capacity of CT s with digital MFM ( V,I, Pf , KW , KWHr , Frequency etc. complete in all respects with soft starters at item no 2.1 ). Make ABB/Crompton /SCHNIEDER/L& T/Siemens/C&s/ Kirloskar OR Equivalent make complete in all respect as per satisfaction of Engineer in-charge |
| 3 | Supplying, Installing, Testing, commissioning of 3 nos. distribution boxes comprising of soft starter ,100 Amp , 3Pole , 25 KA with adjustable overload protection , control MCB 2A thermal overload and under voltage relay ,short circuit and Single phase / phase unbalance relay (SPPR) , earth fault relay for precise motor start , stop , monitor and control protection and dry run pump protection. Make: ABB/Essen/ SCHNIEDER/L& T/Siemens/Kirloskar/Crompton OR Equivalent make . complete in all respect as per satisfaction of Engineer in-charge |
| 4 | Supplying, Installing, Testing, commissioning of 1 no. distribution boxes comprising of LT distribution panel having provision for outgoing connections for lighting and other miscellaneous loads as per site requirements with suitable protections. Make: ABB/Crompton/SCHNIEDER/L &T/Siemens/C&S/Kirloskar OR Equivalent make . complete in all respect as per satisfaction ofEngineer in-charge |
| 5 | Supply, erection, testing & commissioning of Shunt Capacitor of suitable size for raw water pump and motor of 25 HP mentioned in item 1 for improving power upto 0.95 lagging & as per I.S. specifications Make: ABB/Areva/Schneider/ L&T/CAPCO OR Equivalent make complete in all respect as per satisfaction of Engineer in-charge |
| 6 | Supply, erection, testing & commissioning of 3.5Core 70mm2 LT XLPE Aluminium cable from Main supply meter to Incomer Make: CCL/ ICL/ FGL/ Havells/ Finolex OR Equivalent make complete in all respect as per satisfaction of Engineer in-charge |
| 7 | Supply, erection, testing & commissioning of 3 Core 16mm2 LT XLPE Copper cable from incomer to motor panel Make: CCL/ ICL/ FGL/ Havells/ Finolex OR Equivalent make complete in all respect as per satisfaction of Engineerin-charge |
| 8 | Control system power cable (3 core, 2.5mm2) flexible copper armoured cable |
| 9 | Supplying, erection, of GI earthing strips of suitable size for the above equipments and panels complete in all respects as per relevant IS standards. |
| 10 | (a)P/F GI pipe earthing of 1\\" dia pipe upto 4 meter legnth complete i/c required quantity charcoal and salt upto earthing station as per electrical rules. |
| 11 | Supply and erection of 10W/15W LED lights including Exhaust fans for Ventilation along with fitting on the pole including the cost of petty material required for complete indoor and outdoor lighting complete in all respect. |
| 12 | Construction of RCC M25 foundations for panels and motors. |
| 13 | (i) Electrically driven pumping sets. |
| 14 | (ii) Diesel Genset |
| 15 | (iii) LT Panel |
| 16 | Supplying and fixing of nominal 2.5mm ±10% thick fire retardant mats for class A up to 3.3 KV installations. |
| 17 | Providing and Fixing of 4 No. Fire Extinguishers each of 5 kg. capacity CO2 type ISI mark fire extinguisher complete with pressure gauge cylinder and 4 no. sand buckets including M.S. stand complete in all respects including painting with red paint. Make: Life guard/Unitex/Alpha/ Fire bird OR Equivalent make . complete in all respect as per satisfaction of Engineer in-charge |
| 18 | Providing and Fixing of Danger Board plate 440 volts. |
| 19 | Supply and fixing shock treatment charts in Hindi and English language in electrical panel rooms |
| 20 | Supply of first AID BOX complete with first fill of medicines as per IE rules. |
| 21 | Provision of LT rubber gloves. |
| 22 | Earthing for elecric motors & panels etc complete in all respects as per electricity rules & the completejob shall consist of followingcomponents : |
| 23 | (i) P/F copper earthing with 50 cm x 5 mm copper strip & 60cm x 60cm copper plate 3mm thick in3.65m deep pit complete i/c required quantity charcoal and salt upto earthing station asper electrical rules. |
| 24 | (ii) Supply and erection suitable size under ground GI pipe 2\\" dia B-Class for protection of G.I. earthing strips. As per IS Code 3043 of 2018 Make: Jindal/Tata/Surya OR Equivalent make complete in all respect as per satisfaction of Engineer in-charge |
| 25 | Supplying, Erection, Testing, Commissioning of outdoor type 45 KVA capacity silent type Diesel Gen set CPCB approved with AMF panel including cost of suitable capacity inbuilt diesel tank, AVM pad with industrial silencer, exhaust pipe etc. complete in all respects Make: Cummins/Volvo/Kirloskar/Cate rpillar OR Equivalent make complete in all respect of Engineer in-charge |
| 26 | Engineer in-charge |
| 27 | WATER SUPPLY |
| 28 | (27) Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). |
| 29 | (B) Class PN-1.6 as per ISI |
| 30 | ((i)) 450mm i/d Sluice Valves flanged |
| 31 | ((e)) 250mm i/d Sluice Valves flanged |
| 32 | ((f)) 300mm i/d Sluice Valves flanged |
| 33 | (31) Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra. |
| 34 | (B) Class PN-1.6 as per ISI with gun metal flap |
| 35 | ((f)) 250mm i/d Non-return valve |
| 36 | Providing and fixing DI Air valves of PN 1.6 of 200mmD.I. Double acting chamber suitable for sizes i/d M.S. pipe line with body and cover in ductile cast iron of grade GGG 40, all internal parts such as float, shell etc. & all cover bolts of austenitic alloy steel and gaskets and seals of EPDM of grade W 270 with Electrostatic epoxy powder coating (EP-P) inside and outside colour blue RAL 5005.with body and cover in ductile cast iron of gradealong with manual operatedgate valve. Make of Sluice Valve: DVD/Kirloskar / VAG /AVK/ IVC(150 MM) OREquivalent make complete in all respect as per satisfactionof Engineer in-charge |
| 37 | Providing and fixing M.S. pipe made out of 8mm thick MS sheet of reputed manufacture like TATA / SAIL / RASTRIYAISPAT OR Equivalent make including painting with two coats anti corrosive paint complete in all respects.(300MM DIA) |
| 38 | Providing and fixing M.S. pipe made out of 8mm thick MS sheet of reputed manufacture like TATA / SAIL / RASTRIYAISPAT OR Equivalent make including painting with two coats anti corrosive paint complete in all respects.(250MM) |
| 39 | Providing and fixing M.S. pipe made out of 12mm thick MS sheet of reputed manufacture like TATA / SAIL / RASTRIYAISPAT OR Equivalent make including painting with two coats anti corrosive paint complete in all respects.(500MM) |
| 40 | Providing and fixing M.S. SPECIALS made out of 8mm thick MS sheet of reputed manufacture like TATA/ SAIL / RASTRIYA ISPATOREquivalent make including painting with two coats anti corrosive paint complete in all respects.MS tee500mmx500mmx500mm i/d |
| 41 | Providing and fixing M.S. SPECIALS made out of 8mm thick MS sheet of reputed manufacture like TATA/ SAIL / RASTRIYA ISPAT OREquivalent make including painting with two coats anti corrosive paint complete in all respects.MS increaser 500mm x 450 mm i/d |
| 42 | Slipon flanges with rubber insertion and nut bolts etc. complete for 500mm(20\\")i/d |
| 43 | Slipon flanges with rubber insertion and nut bolts etc complete for 300mm (12\\") i/d |
| 44 | Slipon flanges with rubber insertion and nut bolts etc complete for for 250mm (10\\") i/d |
| 45 | Slipon flanges with rubber insertion and nut bolts etc complete for for 100mm (4\\") i/d |
| 46 | Slipon flanges with rubber insertion and nut bolts etc complete for for 80mm (3\\") i/d |
| 47 | MS eccentric reducer 300x 250 |
| 48 | MS concentric reducer 500x 300 |
| 49 | MS concentric reducer 500x 250 |
| 50 | MS bend 300mm 45-90 degree |
| 51 | MS Blind flange 500mm |
| 52 | MS Blind flange 400mm ( for Inspection Chamber) |
| 53 | Providing and fixing of puddle collar size i/d MS pipe line suitable for PN 16 suitable thicknesscomplete in all respects of following sizes of MS pipelines :(300M ) |
| 54 | Providing and fixing of puddle collar size i/d MS pipe line suitable for PN 16 suitable thicknesscomplete in all respects of following sizes of MS pipelines :(100MM) |
| 55 | Providing and fixing of full bore/insertion type compact electromagnetic flow meter of 250 mm dia alongwith tapers comprising of flow censor, flowtransmitter-cum-computing unit, UPS power supply/ instrumentation cables and other contingent materialrequired for fixing the meter complete in all respects. Make : ABB/ SIEMENS/ KROHNEMARSHALL/EUROMET/Schnied er OR Equivalent makecomplete in all respects |
| 56 | Providing and fixing of dewatering submersible pumping set 3HP, 500LPM Head @ 13 mtr. capacity including piping such as suction, delivery, peet valve & other accessories up to disposal point complete in all respects of Kirloskar/WPIL OR Equivalent make and auto scouring arrangement. |
| 57 | Providing and fixing of gylcerin filled 150 mm SS pressure gauge of reputed make on delivery of all pump sets /delivery header make: Bombarider/ Warree/ Feibig/ OR Equivalent make of 0-7 kg/cm2 withh suitable needle valve of 3/4 inch piped and llied accessories omplete in all respects. |
| 58 | Providing ,Laying, testing and commissioning, cables in perforated /ms ladder type tray, the laying work involves, clamping the cable tray with fasteners and metallic clamps as following. Cable tray : 300mm/50 mm/1.5mm |
| 59 | Providing ,Laying, testing and commissioning, cables in perforated/ms ladder type tray, the laying work involves, clamping the cable tray with fasteners and metallic clamps asfollowing Cable tray : 150mm/50 mm/1.5mm |
| 60 | Providing and fixing of MS work required for fabrication of ms grating, Grills, frame work cable supports etc |
| 61 | any other item Please Enable Macros to View BoQ information |
