|
| 1 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of all colour and texture except black, Cherry/Ruby red. |
| 2 | Area of slab upto 0.50 sqm |
| 3 | Area of slab over 0.50 sqm |
| 4 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: |
| 5 | 100x75x4 mm |
| 6 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 7 | 100x10 mm |
| 8 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 9 | 100 mm |
| 10 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. |
| 11 | Double strip (horizontal type) |
| 12 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 13 | GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 14 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : |
| 15 | New work (two or more coats) |
| 16 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 17 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 18 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 19 | Of area 3 sq. metres and below |
| 20 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 21 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion |
| 22 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 23 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 24 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 25 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 26 | Providing and fixing 4 mm ACP sheet in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 27 | Providing & fixing Roller Blind of approved make as approved by Engineer-in-charge made with 0.4mm thick polyster material having weight of 375gm/sqm to 450gm/sqm in all and for all height including Rollar Track/ frame with rolling device of approved quality as required at site as per direction of Engineer-in-charge The rates included all materials, fixing, transformation at site etc. Nothing extra shall be paid. |
| 28 | Providing, fabricating and fixing of Fastrack curtain system of aluminium section of size 1.70x20x25 mm with 60 micron powder coating. The track bendable at a radius of 300mm at a 90 degree with side wheel type and providing ceiling fixing aluminium plate with every track. Net made of good quality of nylon fibers up to height 18\\" to 24\\" etc. complete as per direction of engineer-in- charge as per following specification:- i) Cubical track: Made of Aluminium section of size1.70x20x25mmwith50-60micronthick powder coating in white color finishing. ii) Tracks should be able to a radius of 300mm at 90 degree to cover the whole bed. iii) Curtain: Made of hospital grade premium quality stain retardant fabric with good quality nylon net of 18\\" or 24\\" on top. iv)The supporting system for the track consists of the following materials: i) wall bracket - Made of CRC steel with white powder coating finish. ii) Bridge clamp - Made of CRC steel with powder coating finish. iii) Roof suspender of 12.5 mm mm diameter. These are with powder coating finish and are of variable height fixed with ceiling with anchors, bolts, screws etc.v) Curtain removal point: Made of SS for simple loading and unloading of curtains (Also serve as a end hook retainer). vi) Runners: Comprises of wheel type runners made of Teflon for easy and smooth sliding of curtain. |
| 29 | Providing & Fixing Frosted film of approved brand and quality with high density protective surface layer & reverse side with pre adhesive bonding on existing glass panes including cost of adhesive of approved quality and cleaning of surface over which film to be fixed all complete as per direction of engineer - in - charge. |
| 30 | Fixing of PU Grouting Packers /Epoxy grouting packers/ Ports - Surfaces adjacent to cracks or other areas of application shall be cleaned of dirt, dust, oil, efflorescence, paint or other foreign material which may be detrimental to establishing a bond of the s ealing material before PU injection. Drilling and fixing of NRV nozzles 12mm in diameter to a depth of minimum 75mm in staggered manner at 45° all along the periphery of the Construction and Critical Joints and cracks. The packers should be placed at a distance of 0.500mm C/C. The depth of the bore should be approximately half of the thickness of the concrete. As a rule of thumb the distance of the drill point from the crack is 1/2 the wall thickness. Insert the correctly sized packer into the hole up to 2/3 of its length. Tighten with a wrench or spanner by turning clockwise until sufficient tension has been reached to keep the packer in place during injection. Flush the crack with water before injecting with resin. This will flush out dust, debris and prime the crack for the injection resin and improve penetration of the product into the crack. Water in the crack will activate the resin. |
| 31 | PU grout based on MDI chemistry shall begin at the lowest entry port and continue until the adhesive emerges from the next adjacent port. Grout material is to be 100% solvent-free and 100% solids and Non-toxic The gel time of the product is adjustable by adding a certain percentage of accelerator per the manufacturer’s recommendations. Grout material shall not shrink. Grout material shall cure to a semi-flexible foam structure which is not affected by water or dryness. As soon as the grout emerges from the adjacent port, the injection shall be stopped, the port sealed and the injection transferred to the adjacent port. The process of injection, waiting for the emergence of grout from the next adjacent port, sealing of the injection port and continuation of injection in the adjacent port shall continue until all the cracks are filled. Pressures may vary from 14 bars to 200 bars depending on the size of the crack, the thickness of the concrete and the general condition of the concrete. The injection packer can then be removed by striking them with a trowel or hammer and the area levelled with Epoxy mortar to make the surface levelled. The PU grouting material should have a Viscosity: of 180- 250 Cps as per ASTM D 2196, Tensile adhesion strength > 65 psi ( ASTM D 638 ), and a Density of Approx. 1.12g/lt, Expansion 0f 2000 % - 4000%. Shear Strength >15 psi ASTM C 273, Elongation - 10-20% as per ASTM D 368, Should be non-corrosive, Shrinkage < 4% as per ASTM D 1042 LIST OF MAKES– Con Repair CHY 500/VELOSIT/SIKA/ALCHIMICA/BASF |
| 32 | Plugging of existing holes of PVC sleeves/GI Nipples in RCC Walls provided for Cement Grouting etc by using crystalline plug cement PC-221 or PC 222 of VELOSIT or equivalent after breaking GI Nipples to make the holes leak proof and to stop seeping of water etc for waterproofing treatment complete as per manufacturer specification and direction of Engineer-in-Charge Please Enable Macros to View BoQ information |
