|
| 1 | Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings coomplete all as specified as directed by Engr-in-Charge. |
| 2 | S&F Pre painted galvanised aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screw complete all as specified and as directed by Engr-in-Charge. |
| 3 | S&F Pre painted galvanised aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screw complete all as specified and as directed by Engr-in-Charge. |
| 4 | Dismantling timber scantling 40 Sqcm and over in section, in any position of framed work complete all as specified and as directed by Engr-in-Charge. |
| 5 | Material and labour for rolled mild steel work as in roof truss, purlins, rails and fastenings and similar work including distance pieces, cleats etc conforming to Fe-410-W (Gde-E 250) including cutting and welding as required complete all as specified and as directed by Engr-in-Charge. |
| 6 | M&L for preparation of new surfaces of steel and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge. |
| 7 | Excavating in post holes in soft/ loose soil (or similar holes) each n exc. 0.5 cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed by Engr-in-Charge. |
| 8 | Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundation , filling, mass concrete works complete all as specified and directed. |
| 9 | Taking down frames (wiithout taking offf shutters from the frame) area exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed. |
| 10 | Taking down frames (wiithout taking offf shutters from the frame) area n.exc 1.50 sqm complete all as specified and directed.. |
| 11 | Taking down shutters for any description exc 1 sqm but n.exc 2 sqm complete all as specified and directed. |
| 12 | Taking down shutters for any description n.exc 1 sqm complete all as specified and directed. |
| 13 | S&F 125mmX60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 14 | S&F 105mmX60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed. |
| 15 | M&L for plain cement concrete type B-0 (1:2:4) 12.50mm graded stone aggregate in as in filling of press steel Chowkats complete all as specified and as directed. |
| 16 | M&L 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed including tarring back of chowkhats with tar or coal tar black paint complete all as specified and directed. |
| 17 | M&L for 30 mm thick glazed and skeleton shutters for door shutters of 1st class soft wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a); supplied and fitted to chowkats kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 18 | M&L for 30 mm thick glazed and skeleton shutters for window shutters of 1st class soft wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a); supplied and fitted to chowkats kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 19 | S&F 300mm long Mild steel sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge. |
| 20 | Supply and fixing Flush shutters in doors, 30 mm thick solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 21 | S&F 125 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-Charge. |
| 22 | S&F 100 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-Charge. |
| 23 | Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed, 200 mm length of bolt complete all as specified.on and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge |
| 24 | Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified.on and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge. |
| 25 | S&F for Mild steel butt hinges of size 100mm medium weight cold rolled complete all as specified and directed. |
| 26 | S&F for Mild steel butt hinges of size 75 mm medium weight cold rolled complete all as specified and directed. |
| 27 | M&L for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, with a coat of pink primer complete all as specified and as directed by Engr-in-Charge. |
| 28 | S&F of 3 mm thick plain glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed. |
| 29 | S&F Stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 30 | S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening, complete all as specified and as directed. |
| 31 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail, lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joint together with solvent cement, complete all as specified and as directed. |
| 32 | S&F in repair 20mm dia curtain rails, mild steel, chromium plated with fixing bracket stops, rollers etc, complete all as specified and as directed. |
| 33 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and as directed. |
| 34 | M&L for preparing surfaces of wood and wood based material, new or old of any description and girth and treated with creosote oil complete all as specified and as directed. |
| 35 | S & F for suspended false ceiling using anodised GI exposed ceiling suspension system of grid size 60 cm x 60 cm width main runner 'T' size 24 mm x 24 mm x 0.3 mm thickness and coress Tee of size 24 mm x 24 mm x 0.43 mm thick (using 60 cm x 60 cm E board classic 4 mm thick ceiling board) to be placed in grid of GI sytem duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing position for light fixtures, air conditioning dufuser and ducks, sprinkler, smoke detector etc. The main runner to be secured to structural soffit by hanger @ 1220 mm maximum C/C. The last hanger at the end of each runner should not be placed at more than 450 mm from the adjacent wall. Flush fitting 1200 mm cross 'T' to be inter locked between amin runner @ 610 mm C/C so as to form 600 mm x 600 mm grid complete all as specified directed. |
| 36 | S&F 4mm thick asbestos cement plain building board, fixed in ceiling flat or sloping to timber frame work with screws complete all as specified and as directed. |
| 37 | S&F wooden cover fillets square or rectangular and sectional area exc 3 sqcm & n.exc 6 Sqcm of second class hard wood secured with nails complete all as specified and as directed. |
| 38 | S&F IInd class hard wood exc 13 sqcm & not exc 25 sqcm plain, fillets, square, rectangular or triangular in section, clean swan, secured with nails or brads complete all as specified and as directed. |
| 39 | Preparation of new wooden surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed. Please Enable Macros to View BoQ information |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed. Please Enable Macros to View BoQ information |
