Name of Work:- KASHIPUR NAGAR WARD KE MANAPUR ME RAMLILA STHAL KA SAUNDARYEEKARAN AND VISHRAMALAYA HAAL KA NIRMAN KARYA.
Sl. No.
Item Description
1
E/w cutting & filling including cartage 3.0 KM work done distance all compt.
2
E/W Excavation by machanical means (Hydrolic excavatory manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) all compt. as per DSR no. 2.6.1 in trench for foundation in ordinary soil (loam clay or sandy) including lift upto 1.5 mtr. As per SI 251. SI no. 258A and SI no. 254
3
P/L PCC 1:4:8 (1cement:4 Coarse Sand derived form natural sources:8 graded stone aggregate 40 mm nominal size. As per DSR no. 4.1.8
4
Brick work with common burnt clay F.P.S. (non mudular) bricks of class desidnation 7.5 in foundation and plinth in cement mortor 1:4 (1 cement:4 coarse sand) as per DSR no. 6.1.1
5
RCC work in wall (any thickness) including attached pilasters, columns piers abutments pillars .. Excluding the cost of centering, shuttering and finishing and reinforcement in 1:1.5:3 cement:C.sand stone aggregate of 20 mm all complete as per DSR 5.2.2 for RCC pit cover
6
Steel reinforcement for RCC work including staightening cutting bending placing in position and binding all complete upto plinth level ad per DSR 5.22.6
7
Steel reinforcement for RCC work including staightening cutting bending placing in position and binding all complete above plinth level ad per DSR 5.22A.6
8
Brick work with common burnt clay F.P.S. (non mudular) bricks of class desidnation 7.5 inSuperStructure above plinth level upto floor V level in all shape and sizes in 1:4 (1 cement:4 coarse sand) as per DSR no. 6.4.1
9
Steel work welded in built up sections/framed work, including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc as required.
10
P/F of angle iron frames for door, windows and ventilators of mild steel angel sections of size 35x35x5 mm joints mitred and welded by angle iron 35x35x5 mm fram …. All complete as per DSr no. 10.31
11
12mm thick plaster of mix in 1:4 (1cement:4C.sand mortar) all complete as per DSR 13.4.1
12
Providing and applying white cement based putty of average thickness 1 mm o fapproved brand and manufactrure over the plastered wall surface … all complete as per DSR no. 13.80
13
Finishing of walls with premium acrylic smooth exterior paint with silicone additives of required shade as per DSR 13.47. New work (two or more coats applied as per DSR no. 13.47.1
14
P/L PCC 1:2:4 (1cement:2 Coarse Sand (Zone III) derived form natural sources:4 graded stone aggregate 20 mm nominal size. As per DSR no. 4.2.3
15
Supply and fixing of sign board at site. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
