|
| 1 | M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge. |
| 2 | M & L for preparing old plastered or unplastered surfaces on ceilings including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge. |
| 3 | M & L for preparing old plastered or unplastered surfaces on ceilings and applying one coat of distemper oil emulsion all as specified and directed by Engineer-in-Charge. |
| 4 | M & L for preparing old plastered or unplastered surfaces of walls including cornices and applying one coat of distemper oil emulsion all as specified and directed by Engineer-in-Charge. |
| 5 | M&L for complete removal of existing treatment of any description and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 6 | M & L for preparing old painted wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in- charge. |
| 7 | M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in- charge. |
| 8 | Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc complete all as specified and as directed. |
| 9 | Taking down cement plaster in wall/ceilling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 10 | M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed. |
| 11 | M&L for plastering in internal wall surfaces of 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge. |
| 12 | M & L for two coats of oil bound distemper on newly plastered surface of walls over a coat of alkali resistant primer including preparation of surfaces complete all as specified and directed by Engr -in- charge. |
| 13 | Taking down shutter of any description exc 1 Sqm and n.exc 2 sqm each complete all as specified and as directed |
| 14 | Taking down shutter of any description n exc 1 Sqm each complete all as specified and as directed |
| 15 | Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame exc 1.5 sq. m but n exc 4 sq. m complete all as specified and as directed |
| 16 | Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame n.exc 1.5 sq. m complete all as specified and as directed |
| 17 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm and refixing in the same opening after necessary easing & adjusting/resizing complete all as specified. |
| 18 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directionsof Engineer-in-Chief. |
| 19 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for type of shutters(hung/sliding) of doors, windows, ventilators, including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of aproved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws, all complete as per architctural drawigs and the directions of Engineer-in-charge. |
| 20 | S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick channel fixed with steel screws complete all as specified and directed. |
| 21 | S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed |
| 22 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete. |
| 23 | S&F pressed steel frames (size 105x60mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed. |
| 24 | S&F pressed steel frames (size 125x60mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed. |
| 25 | M&L for providing plain cement concrete 1:3:6 Type C-0 (using 12.5mm graded stone aggregate) as in filling hollow of pressed steel frame. |
| 26 | S & F 35 mm thick second class hard wood, Flush shutters, solid core construction, with block board core and plywoodface panels, commercialmtype on both sides complete all as specified and directed. |
| 27 | S& F 35mm thick glazed and Skelton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/ gauze etc. edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass/ gauze. Note: glazing/ gauzing will be measured separately |
| 28 | S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified. |
| 29 | S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed. |
| 30 | S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified. |
| 31 | S&F of butt hinges, medium weight, cold rolled mild steel of 100 mm long. |
| 32 | Material and labour PCC 1:2:4 type B1 using 20 mm graded aggregate for bed blocks for securing hold fast and the like including weathering, sligtly rounded or chamfered angles and throating, with necessary formwork complete all as specified and as directed. |
| 33 | S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate and complete all as specified. |
| 34 | S&F 150 mm long floordoor stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified |
| 35 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame, glazed with putty complete all as specified and as directed. |
| 36 | S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 37 | S&F frosted or ground/obscured type sheet glass, 3mm thick and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed |
| 38 | S & F sheet glass of 5.50mm thick selected quality in square and exceding 0.5 Sqm in each pane. |
| 39 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 40 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 41 | M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. |
| 42 | M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed. |
| 43 | Dismantling boarding of any description, fixed in any position fixed with nails |
| 44 | M&L block boards 18/19mm thick, grade 2 quality, interior grade, fixed with screws to timber rame work all as specified. |
| 45 | M&L block boards 12 mm thick, grade 2 quality, interior grade, fixed with screws to timber rame work all as specified. |
| 46 | M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive all as specified. |
| 47 | S&F of 100mm brass Hasp and staple, safty type, with hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed. |
| 48 | M&L in repair 2nd class hardwood Plain fillets (50x50) Exc 13 & n.exc 25 Sq.cm, square, rectangular or triangular in section, clean sawn, secured with screws or nails or brads complete all as specified and directed. |
| 49 | S/F of 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished |
| 50 | S/F of Stainless steel butt hinges 75 mm long wih screw |
| 51 | M&L 18mm thick Marine plywood of First Grade (A) , fixed with screws as in cupboards, sides of shelves, partitions and in simillar works, etc all as specified and as directed.. |
| 52 | M&L 12mm thick Marine plywood of First Grade , fixed with screws as in cupboards, sides of shelves, partitions and in simillar works, etc all as specified and as directed.. |
| 53 | S&F Stainless steel wire (6mm) modular kitchen basket set (6 trolley) with corrosion resistance, durable and seamless glossy finish used in modular kitchen cabinets & drawers.Make: Steel gold or equivalent approved by GE.Set Content:-a) 21\\"x20\\"x4\\" (Perforated Cutlery) - 1nosb) 21\\"x20\\"x4\\" (Saucer basket) - 1 nosc) 21\\"x20\\"x4\\" (plian/cutlery Basket) - 1 nosd) 21\\"x20\\"x6\\" (plian/cutlery Basket) - 2 nosd) 21\\"x20\\"x8\\" ( Perfortred cutlery) - 2 nose) 21\\"x20\\"x8\\" (modern Thali Basket) - 2 nosf) 20\\" Telescopic Channel (Heavy) - 9 Sets Note indipendent item will not be counted, total number of items mentioned above will be counted as complete set and will be paid in Each as A/U |
| 54 | S&F Auto concealed Cabinet Hinges, full overlay of size 103 x 64mm etc all as specified and as dierected. |
| 55 | S&F Fancy 'D' Type Drawer / Cabinet handles of Size 100mm, etc all as specified and as dierected. |
| 56 | S&F Magnetic catcher with plate, glosy finish for Drawer / Cabinet of Size not less than 50mm, etc all as specified and as dierected. |
| 57 | S&F in repairs 25mm thick curtain rod stainless steel fancy type complete all as specified and as directed |
| 58 | S&F in repairs fancy type brackets with knobs suitable for 25mm dia stainless steel curtain rod including stay & side clamp as reqd at site complete all as specified and as directed |
| 59 | S&F in repairs Door seal (Snake guard) with Aluminium frame complete all specified |
| 60 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engr -in- charge. |
| 61 | S&F in repairs of 600x450 mm bevelled adge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wdn plug with cromium plated brass screws and cup washers atc complete all as specified and directed by Engr -in- charge. |
| 62 | S&F in repairs glass corner/ mirror shelves size 300/450 mm of each fixed with necessary screws, bolts , and supporting L type angles with drilling in walls complete all as specified and directed. |
| 63 | S&F in repairs PVC Cabinet of size 600mm x450mm with necessary fittings and hinges complete all as specified and directed. |
| 64 | Dismantling floor, heath or wall tiling including cement sand mortar bedding and removing rubbish of the premises complete all as specified and directed. |
| 65 | S&F of Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including Screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and directed by Engr -in- charge.complete all as specified and as directed. |
| 66 | /M&L light dark shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm and n exc 1.00 sqm in floors etc. set and ointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and directed by Engr -in- charge. complete all as specified and directed by Engr -in- charge. |
| 67 | S&F llight/dark shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.42sqm but not exceeding 1.00 Sqm in skirting including 10 mm thick plastering in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 68 | M&L for glazed ceramic tiles coloured of size 300x450x7 mm thick as on walls over jointing in neet slurry and pointing in coloured cement to match the inside of tiles including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engr -in- charge. |
| 69 | Demolition of reinforced cement concrete chimneys, roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 70 | M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in kitchen flatform and selfs in kitchen slabs, etc including necessary form work , complete all as specified and as directed. Set in CM 1:6 |
| 71 | M&L for MS TMT bars 8 to 10 mm dia cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed. |
| 72 | Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar . |
| 73 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over 20 mm thick screed bed or bedding layer in cement mortar (1:6), including pointingin white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 74 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 75 | Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. |
| 76 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. |
| 77 | Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed by Engr-in-Charge. NOTE for Item Nos 75 to 77 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates. |
| 78 | M & L for surface / concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade), ISI marked with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) & incl fixing of normal sunken boxes / modular metal flush boxes, bakelite laminated sheet / Modular White Cover Plates with frames etc. of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases (if required at site) for conduits & sinkings for normal sunken / modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex/KEI, Make of Conduit : Precision/Finolex/Polycab/Modi |
| 79 | (a) One Light/E/Fan/C/Fan/Bell etc. point controlled by one switch 5/6 Amps. |
| 80 | (b) One switch socket outlet point 5/6 Amps on independent board. |
| 81 | (c) One switch socket outlet point 5/6 Amps on same board. Please Enable Macros to View BoQ information 333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333.0 3333.0 3333333.0 3.33333333333333e+98 33333333333333.0 3.33333333333333e+52 |
| 82 | (c) One switch socket outlet point 5/6 Amps on same board. Please Enable Macros to View BoQ information 333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333.0 3333.0 3333333.0 3.33333333333333e+98 33333333333333.0 3.33333333333333e+52 |
