|
| 1 | [B&R PORTION]Demolition of brick work built in CM or cement lime mortor incl all quions arches, pillar etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material and labour for brick work with flyash bricks of class designation 75, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material and labour for flyash Brickwork having class designation 75, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and directed by Engineer-in-Charge. |
| 4 | Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material and labour for Rendering 15 mm thick on surface of any description of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on walls in cement mortar 1:4, using water proofing compound complete all as specified and directed by Engineer-in-Charge. Note: WPC will be measured and paid for separately. |
| 7 | Material and labour for washed stone grit plaster on exterior walls in two layers ,under layer 12mm cement plaster 1:4 (1 cement & 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on under layer @ 3 kg of cement per sqm , top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size ) in panels with groove all around as per approved pattern including scrubbing and washing , the top layer with brushes and water to expose the stone chippings complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material and labour for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens , nailed to under layer including removal of wooden battens, repair to edges of panels and finishing the groove complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply only integral water proofing comound complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material and labour for preparation of new plastered surface of walls & applicataion of two or more coats of 100% premium acrylic emulsion paint with fully automatic airless spray machine & paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance , dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 lit/10 sqm over & including priming coat of exterior primer applied @2.20kg/10 Sqm complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material and labour for preparation of old plastered surface of walls including removal of existing treatment by mechanical dry wall sander machine & applicataion of two or more coats of 100% premium acrylic emulsion paint with fully automatic airless spray machine & paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance , dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 lit/10 sqm over & including priming coat of exterior primer applied @2.20kg/10 Sqm complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with fully automatic airless spray machine ,over a coat of alkaline resistant primer & a coat of birla wall care putty surface having minimum thickness 1.50mm complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material and labour for complete removal of existing treatment on surface of walls by using mechanical dry wall sander machine for complete removal of all layers of treatment and reaching upto old plastered surface and applying a coat of wall care putty not less than 1.5mm thick as per manufacture instructions and applying two coats of oil emulsion paint with fully automatic airless spray machine over a coat of alkaline resistant primer complete all as specified and directed by Engineer-in-Charge. |
| 14 | Dismantling of AC corrugated, semi corrugated sheet including ridges etc. in roof covering complete all as specified and directed by Engineer-in-Charge. |
| 15 | Dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs/ blankets, any thickness, including cover fillets, false ceilings etc complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material and labour Roof Trusses (framed) , trussed , purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material and labour for plates (plain and chequered) channels, square cut or notched ( ordinary and counter sunk) forming holes without any attachment of Fe-410W(gde-E-250) quality A complete all as specified and directed by Engineer-in-Charge. |
| 18 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-charge. |
| 19 | Supply and fixing mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces,cooler stands etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe 410 W (GDE-E-250) quality-A complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of thick any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge. |
| 21 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, jhallars as per approved design fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge. |
| 22 | Supply and fixing mild steel sheet 1.25mm thick eaves gutters 150mm diameter, galvanised class 3 half rounded with rounded edges complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply and fixing angles (internal or external) or nozzle pieces outlet of 150mm dia & 1.25mm thick galvanised sheet complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply and fixing stop ends (for spigot or socket ends) of 150mm dia & 1.25mm thick galvanised sheet complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material and labour for false ceiling with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles at all heights with glass fibre reinforced gypsum false ceiling tiles of size 595x595 mm of approved texture, design & patterns having moisture content less than 2%, humidity resistance of 99% , NRCO 0.50 to 0.75 as per IS 8225:1987, noncombustible as per BS 476 (part 4)- 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120 gms per sqm on both sides) comprising of main T runners of size 15x32mm of length 3000mm, cross T of size 15x32mm of length 1200mm & secondary intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600x600mm , suspended from ceiling using galvanised mild steel 3mm wire upto 1250mm length and L shape level adjuster of size 85x25x2mm . Galvanised iron perimeter wall angle of size 24x24x0.4mm of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm centre to centre & 40mm long dry wall wood screws . The work shall be carried out as per specification , drawings & direction of Engineer-in-Charge |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr in Charge. |
| 27 | Demolition of Cement Concrete as in G.F & paving n. exc. 15cm thick (above or below ground level) complete all as specified and directed by Engineer-in-Charge. |
| 28 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge. |
| 29 | Material and labour for 50 mm thick PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection finish the surface fair and even without using extra cement complete all as specified and directed by Engineer-in-charge. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.00 m all as directed 6mm joints filled with 85/25 grade bituman and sand in the ratio (1:3) shall be provided, complete all as specified and directed by Engineer-in-Charge. |
| 30 | Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 31 | Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, 7 to 8 mm thick as in brushing vertical surfaces such as dado, skirting, set and jointed in brushing neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 32 | Material and labour for premium quality coloured glazed ceramic tiles (350 x 250 x 7 mm thick / 450 x 300 x 7 mm thick) and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match including rendering 10 mm thick in cement plaster 1:4 as in vertical surfaces complete all as specified and directed by Engineer-in-Charge. |
| 33 | Material and labour for 18 to 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick cement mortar (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, polishing, rounding and moulding of stone slabs on edges, complete all as specified and directed by Engineer-in-Charge. |
| 34 | Material and labour for 75mm PCC type D-2 , (usimg 40 mm graded stone aggregate) 1:4:8 in subbase complete all as specified and directed by Engineer-in-Charge. |
| 35 | Taking down chowkaths or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc, complete all as specified and directed by Engineer-in-Charge. |
| 36 | Taking down chowkaths or frames exc 1.5 sqm but n exc 4.0 Sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc, complete all as specified and directed by Engineer-in-Charge. |
| 37 | Material and labour for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed. Note : Quantity will be measured perimeter of wall x depth of penetration, complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made, complete all as specified and directed by Engineer-in-Charge. Note: Material Test Certificate & Authentication should be provided by the manufacturing company. |
| 39 | All as per item No 38.00 here in before but chowkhat size 65x 100mm, complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply & fixing of stainless steel butt hinges 100 mm long medium weight complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and directed by Engineer-in-Charge. Note: Material Test Certificate & Authentication should be provided by the manufacturing company. |
| 42 | Material and labour 30 mm thick Factory Made 100% Solid WPC ( Wood polymer Composite ) gauzed and skeleton Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ),alcium Carbonate andnatural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheetSingle Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 -2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. rate inslusive for Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws incl Aluminum Jali and Stainless wiremess as per required. complete all as specified and directed by Engineer-in-Charge. Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company |
| 43 | Supply & fixing aluminium anodised extruded fabricated type handle 100mm long complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply and fixing 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply & fixing aluminium anodised extruded fabricated type handle 150 mm long complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply and fixing 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply & fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet, cast or extruded section and fixing bolts. sliding bolts extruded sections complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply and fixing windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2 Nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes.complete all as specified and directed by Engineer-in-Charge. (Make: A2Z Infra Solutions/ Elixir Metform Pvt Ltd./ Lakshmi Fabrications) |
| 49 | Supply and fixing ventilators made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished with suitable provision as in ventilator in toilet/bathroom/staircase, complete all as specified and directed by Engineer-in-Charge. (Make: A2Z Infra Solutions/ Elixir Metform Pvt Ltd./ Lakshmi Fabrications) |
| 50 | Material and labour for painting to steel surfaces of any description not other wise described over 10cm width or girth with two coats of synthetic enamel paint over one coat of red oxide primer incl preparation of new surfaces complete all as specified and directed by Engr-in-charge |
| 51 | Supply and fixing stainless steel curtain rod 25mm dia having wall thickness 1.6mm fixed with and including stainless steel decorative brackets, two lotto for each road length at both end etc as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 52 | Supply and fixing in repair SS peg set of 5 size 300x20x2.5mm complete all as specified and directed by Engineer-in-Charge. |
| 53 | Taking down of Eaves gutter/rain water pipe( AC rain water pipe /SWG pipe line of any size or pattern), incl all fittings, heads, shoes, bends, swannecks etc including cleaning or reflxing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 54 | Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site, complete all as specified and directed by Engineer-in-Charge. |
| 55 | Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site, complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supplying and laying of CPVC pipes 16mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-Charge. |
| 58 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends of edges of landings, steps, cills etc., and cutting chases for concealed water tubing or concaled conduct wiring and making good cutting not exc 10cm girth complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply and fixing in repairs,Vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe, P or S trap,) complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply and fixing in repairs for PVC water closet seat, cover for pedestal pan , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply & fixed in repairs vitreous China squatting pan of “Orissa Pattern” of size 580x440mm coloured with integral footrest complete including making good floors complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply and fixing in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe complete all as specified and directed by Engineer-in-Charge. |
| 63 | Supply and fixed in repair counter top wash hand basin vitreous china of size 520x410x150mm including SS bottle trap complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply and fixing in repair pillars taps fancy type chromium plated screwed down high pressure with or without plattered cast copper alloy with capston head long screwed shanks of 15mm bore dia pipe complete all as specified and directed by Engineer-in-Charge. |
| 65 | Supply and fixing in repair health faucet ABS body with 1 metre long stainless steel tube and wall hook, complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply and fixing in repair Chromium plated toilet paper holder, complete all as specified and directed by Engineer-in-Charge. |
| 67 | Supply and fixing in repair Two way angle cock with flange chromium plated of bore 15 mm complete all as specified and directed by Engineer-in-Charge. |
| 68 | Supply and fixing in repair Bib tap, cast copper alloy, with crutch or butterfly handle chromium plated, fancy type, screwed down, screwed for iron pipe (or for brass ferrule and fixed) high pressure, suitable for 15 mm bore pipe, complete all as specified and directed by Engineer-in-Charge. |
| 69 | Supply & fixed in repairs stainless steel grating openable 100mm size of PTMT (min weight 25gms) with/without hole including fixing with white cement complete all as specified and directed by Engineer-in-Charge. |
| 70 | Supply and fixing in repair Stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified and directed by Engineer-in-charge. |
| 71 | Supply and fixing in repair 20mm bore Gun-Metal, globe or gate valves , with iron wheel head,screwed down both end for iron pipe and fixed all as specified and directed by Engineer-in-Charge. |
| 72 | Supply and fixing in repair sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long, complete all as specified and directed by Engineer-in-Charge. |
| 73 | Supply & fixing Soap dish vitreous china white, app size 160x160x90mm any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engineer-in-Charge. |
| 74 | Supply and fixing in repair brass chromium plated, towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge. |
| 75 | Supply and fixing in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge. |
| 76 | Material and labour for 75mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge. |
| 77 | Supply and fixing in repair 600x450 mm size bevelled edge looking mirror of selected quality glass mounted on 12mm thick on AC building boards marine plywood with powder coated aluminium frame alround and fixed with wooden plugs, CP screws, cup and washers, complete all as specified and directed by Engineer-in-Charge. |
| 78 | Supply and fixing of water storage tank of 1000 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank & removing from site complete all as specified and directed by Engineer-in-Charge.Note:- Tank shall be white and make of tank shall be engraved on the tank. |
| 79 | Supply and fixing for 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 80 | Supply and fixing PVC (SWR) 75 mm pipe type A single socket in any length with rubber ring joints laid in floors or trenches complete all as specified and directed by Engineer-in-Charge. |
| 81 | Supply and fixing of PVC (SWR) bends 110 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 82 | Supply and fixing of PVC (SWR) bends 75 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 83 | Supply and fixing of 110 mm bore PVC (SWR) junction single T (equal or unequal), including jointing with solvent cement, complete all as specified and directed by Engineer-in-Charge. |
| 84 | Supply and fixing of 75 mm bore PVC (SWR) junction single T (equal or unequal), including jointing with solvent cement, complete all as specified and directed by Engineer-in-Charge. |
| 85 | Supply and fixing in repair of PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outer dia metre outlet of 75 mm complete all as specified and directed by Engineer-in-Charge. |
| 86 | Demolition and breaking up 150 mm bore drain pipes (salt glazed stone ware pipes) set in cement mortar complete all as specified and directed by Engineer-in-Charge. |
| 87 | Material and labour for Concrete bed to drain pipes of 100mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 complete all as specified and directed by Engineer-in-Charge. |
| 88 | Material and labour for salt-glazed stoneware gully traps,150x150 square or round mouthed, type \\"P\\" setting and jointing to drains with cm 1:1, complete all as specified and directed by Engineer-in-Charge. |
| 89 | Supply and fixing Mild steel TMT bar 10mm dia and over cut to length bent to shape required, including cranking bending spirally for hooping for colunms hooking ends and binding with and including mild steel sire (annealed) not less than 0.9mm dia (or securiy with clips) complete all as specified and directed by Engineer-in-Charge. |
| 90 | Demolition of RCC n exc 15cm thick in any position below or above ground level (below or abobe ground level) complete all as specified and directed by Engineer-in-Charge. |
| 91 | Material and labour for RCC (Nominal Mix) type B-0 1:2:4 (using 12.5 mm graded aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply and fixing red/yellow coloured Machine pressed precast conctete interlocking paver block approved any shape and size by Engr-in-Charge confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with Grey cement & pigment, complete all as specified and directed by Engineer-in-Charge. |
| 93 | Material and labour for Sand filling under floors or in foundation including watering & consolidation 25mm thick complete all as specified and directed by Engineer-in-Charge. |
| 94 | Material and labour for precast cement concrete Type B1 1:2:4 (20mm graded aggregate) as in kerb stones with solid blocks exc 10cm in width & setting in mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 95 | Formwork to soffits of suspended slab such as roof slab, floor slab, landing & similar work n. exc 200mm thick complete all as specified and directed by Engineer-in-Charge. |
| 96 | [E&M PORTION]Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling rosees, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings floors etc, complete all as specified and directed by Engineer-in-Charge. |
| 97 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed/surface type on wall/ceiling and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including pressed steel terminal boxes suitable for modular covered plate over sunken box for housing the modular switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing, complete all as specified and directed by Engineer-in-Charge for the following :- (a) One light point /fan point/Exhaust fan point/bell point controlled by one, one way switch and fan regulator(b) Metal flush/sunken Box, modular switch/socket cover plate & sheet are inclusive in the item rate quoted. (c) Only switches, socketes and fan regulators to be measured and paid seperately. |
| 98 | Description all as per item No 97.00 here in before but for one 3 pin socket out let point 6 Amps on same board, complete all as specified and directed by Engineer-in-Charge. |
| 99 | Description all as per item No 97.00 here in before but for one 3 pin socket out let point 6 Amps on independent board, complete all as specified and directed by Engineer-in-Charge. |
| 100 | All as per srl item No 97.00 above but point wiring for one socket out let 16 & 6 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor, complete all as specified and directed by Engineer-in-Charge. |
| 101 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal , PVC, Polycarponate, Iso lated body complete all as specified and directed by Engineer-in-Charge. |
| 102 | Supply and fixing modular switches, one way, 6 amps one module, 230V, 50 Hz supply, ISI Marked complete all as specified and directed by Engineer-in-Charge. |
| 103 | Supply and fixing modular switches, one way, 16/20 Amps, one module, 230 volt , AC supply, complete all as specified and directed by Engineer-in-Charge. |
| 104 | Supply and fix modular socket outlet 6 amps, 2/3 pin combined 2 module, 230 volt,complete all as specified and directed by Engineer-in-Charge. |
| 105 | Supply and fix modular socket outlet 6/20 amps, 2/3 pin, 2 module, ISI Marked complete all as specified and directed by Engineer-in-Charge. |
| 106 | Supply and fix modular fan regulator step type one module / 2 module, 120 W 230 Volts, 50 Hz, AC Supply,ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 107 | Supply and fixing in repair of LED light fitting 1x20W , 220V, AC with Aluminium housing with batten type with driver , holder including 20W LED tube light, duly marked with relevent IS, PF not less than 0.9,lumen efiicacy not less than 100 lumen/watt for connecting up with three core flexible copper conductor cable of suitablae size from celing rose to connector complete all as specified and directed by Engineer-in-Charge. |
| 108 | Supply and fixing surface mounted LED tube light fitting with high efficient diffuser 2 feet mirror light, aluminium housing in CRCA body suitable and including 10 watt LED tube high efficient, AC 220-240 volts, 50 Hz, PF not less than 0.9,lumen efiicacy not less than 100 lumen/watt and connecting with 3 core copper conductor flexible cable from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed by Engineer-in-Charge. |
| 109 | Supply and fixing in repair Bulk Head light Fitting 10 Watt ,PF not less than 0.9 and connected with 3 core copper conductor cable of size 1.50 Sqmm, for fixing the light fitting complete all as specified and directed by Engineer-in-Charge. |
| 110 | Supply and fix in repair recess mounted LED flat panel 2' x 2' with high efficient LEDs and glare free full decorative light fitting, 36 watt, energy efficient provided with including LED 36 watt ,PF not less than 0.9, lumen efficacy not less than 100 lumen/watt ,CCT 6500 K with provision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting complete all as specified and directed by Engineer-in-Charge. |
| 111 | Supply and fixing bracket for security light made up of 25mm dia,0 9m long GI pipe, light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed by Engineer-in-Charge. |
| 112 | Supply and fixing LED security light luminaire 30/35 watt 230 volt AC outdoor tyoe with high pressure die cast aluminum housing, toughened heat resistant glass, IP65 protection, better optics for uniform distribution with multiplte LEDs not less than 2 W eachand having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed by Engineer-in-Charge. |
| 113 | Supply and fixing sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole thermal release type ,125 AMPS ,25 KA as incomer and MCBs as out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed by Engineer-in-Charge. |
| 114 | Supply and fixing in repair SPN distibution board 8 way, double door, IP 43, as per IS 8623 including fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles complete all as specified and directed by Engineer-in-Charge. |
| 115 | Supply and fixing 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed by Engineer-in-Charge. |
| 116 | Supply and fixing 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 to 63 Amp, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed by Engineer-in-Charge. |
| 117 | Supply and fixing 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of SP and current carrying capacity 40 to 63 Amp, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed by Engineer-in-Charge. |
| 118 | Material and labour for sub main wiring with two single core FRLSH, PVC insulated unsheathed copper conductor 2 cable 6.0 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6.0 sqmm,green colour for earth continuity conductor including including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed by Engineer-in-Charge. |
| 119 | Material and labour for taking down ceiling fan any type, taking in safe costudy and refix the same after completion of repair work including servicing, provision of cable from ceiling rose and painting with synthetic enamel paint by sparying including filling cavities with filler, one coat after cleaning all dust complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 120 | Material and labour for taking down ceiling fan any type, taking in safe costudy and refix the same after completion of repair work including servicing, provision of cable from ceiling rose and painting with synthetic enamel paint by sparying including filling cavities with filler, one coat after cleaning all dust complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
