|
| 1 | Excavation for roadway in earth,soil of all sorts,sand,gravel or soft murum including dressing section to the required grade,camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. |
| 2 | Item No. 2 :- Providing & Laying Cast in Situ / Ready Mix Cement Concrete in M - 10 of Trap / Granite / Quartzite / Gneiss Metal for Foundation & Bedding including Bailing Out Water, Steel Centering, Formwork, Laying / Pumping, Compacting, Roughening them if Special Finish is to be Provided, Finishing if required & Curing complete, with Fully Automatic Micro Processor based PLC with SCADA enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant (Pan Mixer) etc. complete. With Fine Aggregate (Natural Sand / Crushed Sand V. S. I. Grade Finely Washed etc.) |
| 3 | Item No. 3 :- Providing & Laying in Situ / Ready Mix Cement Concrete M - 20 of Trap / Granite / Quartzite / Gneiss Metal for R. C. C. Work in Foundations like Raft, Strip Foundations, Grillage & Footings of R. C. C. Columns & Steel Stanchions etc. including Bailing Out Water, Steel Centering, Formwork, Laying / Pumping, Cover Blocks, Compaction & Curing, Roughening the surface if Special Finish is to be Provided (Excluding Reinforcement & Structural Steel) etc. complete, with Fully Automatic Micro Processor based PLC with SCADA enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant (Pan Mixer) etc. complete. With Fine Aggregate (Natural Sand / Crushed Sand V. S. I. Grade Finely Washed etc.) |
| 4 | Item No. 4 :- Providing & Laying Cast in Situ / Ready Mix Cement Concrete M - 20 of Trap / Granite / Quartzite / Gneiss Metal for R. C. C. Columns as per Detailed Designs & Drawings or as Directed including Steel Centering, Formwork, Cover Blocks, Laying / Pumping, Compaction, Finishing the formed surface with Cement Mortar 1:3 of sufficient minimum thickness to give a smooth & even surface or Roughening if Special Finish is to be Provided & Curing etc. complete. (Excluding Reinforcement & Structural Steel), with Fully Automatic Micro Processor based PLC with SCADA enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant (Pan Mixer) With Fine Aggregate (Natural Sand / Crushed Sand V. S. I. Grade Finely Washed etc.) |
| 5 | Item No. 5 :- Providing & Laying Cast in Situ / Ready Mix Cement Concrete M - 20 of Trap / Granite / Quartzite / Gneiss Metal for R. C. C. Beams & Lintels as per Detailed Designs & Drawings or as Directed including Steel Centering, Formwork, Cover Blocks, Laying / Pumping, Compaction & Roughening the surface if Special Finish is to be Provided & Curing etc. complete. (Excluding Reinforcement & Structural Steel), with Fully Automatic Micro Processor based PLC with SCADA enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant (Pan Mixer) etc. complete. With Fine Aggregate (Natural Sand / Crushed Sand V. S. I. Grade Finely Washed etc.) |
| 6 | Item No. 6:-Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap / quartzite / granite / gneiss metal for R.C.C. Waist slab ,and steps of staircases as per detailed design and drawings or as directed including steel centering ,plywood / steel form work,steel props ,laying / pumping,compaction,finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc.complete.( Excluding reinforcement ,including cover block ).( Newly laid concrete shall be covered by gunny bag,plastic,tar paulin etc.)with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 7 | Item No. 7:- Providing & Laying Cast in Situ / Ready Mix Cement Concrete M - 20 of Trap / Granite / Quartzite / Gneiss Metal for R. C. C. Pardi of required thickness including Steel Centering, Formwork, Cover Blocks, Laying / Pumping, Compacting, Finishing & Roughening them if Special Finish is to be Provided & Curing etc. complete. (Excluding Reinforcement & Structural Steel), with Fully Automatic Micro Processor based PLC with SCADA enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant (Pan Mixer) etc. complete. With Fine Aggregate (Natural Sand / Crushed Sand V. S. I. Grade Finely Washed etc.) |
| 8 | Item No. 8 :- Providing & Fixing in Position TMT - FE - 500 Bar Reinforcement of Various Diameters for R.C.C. Pile Caps, Footings, Foundations, Slabs, Beams, Columns, Canopies, Staircase, Newels, Chajjas, Lintels, Pardis, Copings, Fins, Arches etc. as per Detailed Designs, Drawings & Schedules including Cutting, Bending, Hooking the Bars, Binding with Wires or Tack Welding & Supporting as required complete. |
| 9 | Item No. 9 :- Providing & Fabricating Structural Steel Work in Rolled Sections like Joists, Channels, Angles, Tees etc. as per Detailed Design & Drawings or as Directed including Cutting, Fabricating, Hoisting, Erecting, Fixing in Position Making Riveted / Bolted / Welded Connections without Connecting Plates, Braces etc. & including One Coat of Anticorrosive Paint & Over it Two Coats of Oil Painting of Approved Quality & Shade etc. complete. |
| 10 | Item No. 10 :- Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 60 mm thickness of having a strength of 400 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand) |
| 11 | Item No 11:- Providing and fixing in position. (as per I.S.1868 / 1982)Aluminium sliding window of two tracks with rectangular pipeavingoverall\dimension 63.50 x 38.10 x 1.02 mm at weight0.547 kg/Rmt. and window frame om track section 61.85 x31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side tracksection 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The utter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary minium sections fixtures andfastenings such as roller bearing in nylon casting and locking catch fitted in vertical section of shutter including 5 mmthick plain glass with all required screws and nuts etccomplete. With colour Anodising with box. |
| 12 | Item No-12 Providing and fixing Name Board of approved size including lettering and painting on M S Board |
| 13 | item no-13 material testing charges |
| 14 | 1) Steel |
| 15 | 1) Tensile Strength, % Elongation, Yield Stress, Weight Per Meter, Bend / Rebend Test, Proof Stress etc. Group Test |
| 16 | 2) Concrete |
| 17 | 1) Compressive Strength of C. C. Cube (Set of 3 Cubes) Please Enable Macros to View BoQ information |
