|
| 1 | Demolition of brick work built in CM or Cement lime mortar incl all quions arches, pillar etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material and labour for brick work with flyash bricks of class designation 75, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 3 | Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material and labour for Rendering 15 mm thick on surface of any description of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified. |
| 5 | Dismantling of AC corrugated, semi corrugated sheet including ridges etc. in roof covering ccomplete all as specified and directed by Engineer-in-Charge. |
| 6 | Material and labour anchor bolts, cleats, roof, trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed by Engineer-in-Charge. |
| 7 | Supply and fixing steel work in struts, tubular trusses, stanchions including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St-240 complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material and labour for plates (plain and chequered) channels, square cut or notched ( ordinary and counter sunk) forming holes without any attachment of Fe-410W(gde-E-250) quality A complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge. |
| 10 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge. |
| 11 | Demolition of Cement Concrete as in G.F & paving n. exc. 15cm thick (above or below ground level) complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material & labour for painting to steel surfaces of any description not other wise described over 10cm width or girth with two coats of synthetic enamel paint over one coat of red oxide primer incl preparation of new surfaces complete all as specified and directed by Engr-in-charge |
| 13 | Demolition of RCC including roof treatment exc 15cm thick in any position complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material and labour for RCC M-25 design mix (20mm graded stone aggreagte) as in slabs supported on walls etc complete all as specified and directed by Engineer-in-Charge. |
| 15 | Formwork to soffit of suspended slab such as roof slab. floor slab landings & similar work n. exc 200mm thick complete all as specified and directed by Engineer-in-Charge. |
| 16 | Formwork to edges of concrete flats, treads, breaks in floors etc, horizontal & sloping by similar work exe 10cm but n.exc 20cm wide complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply and fixing Mild steel TMT bar 10mm dia and over cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and fixing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material and labour for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material and labour for preparation of new plastered surface of walls & application of three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 21 | Material and labour for preparation of new plastered surface & application of two coats of cement based paint over a coat of alkali resistant primer paint complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material and labour for preparation of old painted surface & application of two coats of cement based paint complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material and labour for preparation of new plastered surface & application of two coats of whitewash on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 24 | Dismantling wrought iron or mild steel work any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge. |
| 25 | NOTE:- Amount of credit of Rs. 1,13,600.00 for retrieved materials is mentioned in Schedule of Credit Page No 21 & 22 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
