|
| 1 | BALANCE WORKS OF GIS 300 EXTN (IN SCOPE) |
| 2 | Excavation in ordinary soil / debris including Clay black cotton soil , murum , sand icluding pickshovels, front loader (as defined in IS:1200) etc. for all types of foundations/ footings, plinth beams pile caps or any other substructure,including soring, shuttring, dewatering and disposal of surplus earth up to a distance of 200 M from the nearest edge of excavation area, The rate shall include all tools, tackles, supervision, transport andincidental expense, overhead & profit, etc. as per Tech Specification and up to a depth of 2M below existing level. |
| 3 | Providing and Filling gravel of size 40 to 75 mm as soling under foundazion, and in other areas including mechenical compaction and voidfillings with down graded metal and to required level and grades all as per technical specifications. |
| 4 | Providing, mixing, placing in position, Plain Cement Concrete M20 GRADE as per IS:456 under foundations, floors, plinth beams etc. includingcompaction by vibration, curing, using 40 mm down aggregate all per tech-spec. but excluding form work and reinforcement. |
| 5 | Supply and place 0.25 mm thick polythene sheet below grade slab confirming to ASTMD 2103 or equivalent. |
| 6 | Providing, mixing, placing in position Reinforced Cement Concrete of grade M30 using 20 mm down coarse aggregate as per IS:456 in foundations ,beams, plinth beams, columns, portals, slabs, walls, curved walls ,retaining walls, pedestals etc, including compaction, vibration, curing and finishing all as per techincal specification but excluding form work andreinforcement. All from foundation level (of any depth below EGL) to plinth level. |
| 7 | Providing, mixing, placing in position Reinforced Cement Concrete of grade M30 using 20 mm down coarse aggregate as per IS:456 in foundations ,beams, plinth beams, columns, portals, slabs, walls, curved walls ,retaining walls, pedestals etc, including compaction, vibration, curing and finishing all as per techincal specification but excluding form work andreinforcement - all works above plinth level |
| 8 | Form work for concrete elements at all level with required slopes as per drawing and specifications including materials, making, fixing, supportlng and after concreting stripping at appropriate time, all as per tech-spec and drawings. |
| 9 | Non-shrink grout with minimum compressive strength of 650 kg/cm2 using, Conbextra -GP2 of M/s.Fosroc OR equivalent, as per manufacturers specification. |
| 10 | Providing and constructing 1st class brick work in cement mortar 1:6in Substructures: Foundations, walls, pillars chambers, etc.includingin location including all tools and tackele, mason /labour / scaffolding etc complete. |
| 11 | Providing and constructing 1st class brick work in cement mortar 1:6in Superstructures: Walls, pillars, chambers, etc.includingin location including all tools and tackele, mason /labour / scaffolding etc complete. |
| 12 | Providing and applying external plaster in Cement mortar 1:4 20 mm thick ,in two layers with surface textured coating including Scaffolding , tools and tackles. curing etc complete. |
| 13 | Providing Reinforcement steel in RCC works as per drawing andspecifications including , straightening, recoiling, removing milscalesand rust, cutting, bending to required shape, placing, binding inposition, welding wherever required, supply of approved type of bindingwire etc. all as per technical specifications and for reinforcement bars conforming High Yield strength Deformed bars (HYSD)conforming to IS:1786, produced by the thermo-mechanical treatmentprocess and with enhanced specified minimum percentage elongation(>14.5%) as per IS13920 of grade Fe500D |
| 14 | Filling in excavations, pits, trenches with selected sand in layers of150 mm including compaction as per Technical Spec. |
| 15 | Providing and finishing existing or newly laid concrete floor with ironite finishing consisting of 38 mm thick M-20 grade concrete with 12mm thick ironite topping consisting of cement mortor 1:3 made withscreened sand and mixed with ironite powder or flakes not more than 1 to2 mm in length and 0.25 mm in lateral dimensions, in proportion of 12.5kg per 50 kg of cement, including finishing as specified. |
| 16 | Providing and fixing of SS Hand railling consisting of top rail, mid rail, toe guard and verticale post etc with Decorative SS pipes (Conforming toSS-304). |
| 17 | Providing and fixing M.S. Hand railing consisting of top rail, mid rail, toe guard, vertical post, etc. Railsshall be 32NB MS pipe. (Handrail Grade E250B) Toe Plate shall be 100mm x 6mm flat. Work shall be executed as per Drawing and technical specifications (Surface cleaning and painting included) |
| 18 | Providing and instaling removable type suspended acoustic tile system for ceiling all as per manufacturers specifications, drawings, technical specifications and engineer in-charge |
| 19 | Dismantling of existing structures or part, brickwork, pavings etc at all levels including alltools, tackles, compressed air, labour, crane, consumables and disposalof debris as directed within a lead of 1000 M from site. |
| 20 | Supplying fabricating, erecting and aligning structural steel at alll evels as per drawing including tools, tackles, cutting, welding ,consumables, erection and assembly bolts, sag rods, permanent GALVANISED bolts of grade 8.8 (turned and fitted), including preparation of fabrication drawings for all types of structures in buildings, pipe racks, platforms and towers, cable tray supports &technological structures with standard steel sections as per IS / BS /Euro tandards. Structural Steel shall be of Grade E250B ( Fe410W) quality BR/BO in accordance with IS 2062 and IS 800 and Jindal section like UB, UC shall be of Grade S275 JR/JO conforming to BS EN 10025. (NOTE: Structural Steel shall be supplied by contractor. No free issue by IOCL)\\" |
| 21 | Providing and fixing Hot Dip Galvanized Chequered Plates for 6 mm thk as per requirement. |
| 22 | Providing and laying flooring, skirting and dados with approved tilesand in specified bedding and jointing mortor including machinepolishing and finishing as specified in section of technicalspecifications with decorative, matt/mirror finish homogeneous doublecharge VITRIFIED porcelain tiles of minimum size 600 mm x600 mm x 10 mmthk of approved quality, colour, make, design/pattern. |
| 23 | Providing, making and fixing aluminium ventilators with anodised aluminium fittings, top hung shutters fully glazed with 4mm thickordinary glass sheet. |
| 24 | Provide, install and test white glazed sanitary wares of approved makeand type including filling of joints wherever required with cement orany other approved sealant complete in all respects as per technical specifications and for Western style commodes as perIS-2556 including PVC seat covers and top including C.P. brass 25 mmdia. flush cock of Prince or equivalent, painting of all exposedmetallic surfaces with 2 coats of approved shade and quality Syntheticenamel paint over a primer coat of red oxide zinc chromate, cuttingwalls, floors and making good of same, making inlet and outletconnections, finishing, all complete. |
| 25 | Provide, install and test Large flat back urinal of size 610 mm x 400 mmx 380 mm conforming to IS-2556 including providing C.P. brass 15 mm stopcock of Prince or approved equivalent, painting all exposed surfaces with 2 coats of approved shade of Synthetic enamel paint over a primercoat of red oxide zinc chromate, making inlet and outlet connections,fixing C.P. brass screws finishing, all complete. |
| 26 | Provide install and test white Wash Basin of size 510*400 including mounting brackets filling of joints etc complete. All as per tech spec and drawings |
| 27 | Provide and install Toilet paper holder. All as per tech spec and drawings |
| 28 | Provide and install soap dish in wall. All as per tech spec and drawings |
| 29 | Provide and fix 25 mm thick marble stone partition of size 1200 mm x 600mm between two urinals including C.I. brackets at bottom, cementjointing etc. complete in all respects. |
| 30 | Providing and fixing Waste water piping and fittings for waste water including laying, jointing, testing etc complete for 100mm dia. round stoneware glazed pipes of spigot and socket type. |
| 31 | Provide and install waste water piping and fittings for drainage ofwaste water including laying, jointing, testing etc. complete for 200 mm dia. PVC type. |
| 32 | Provide and install C.I. gully trap / chamber including providing brick chamber and C.I. cover of size 300mm x 230mm. All as per tech spec and drawings |
| 33 | Provide and instal CI floor trap with cp brass gratings. All as per tech spec and drawings |
| 34 | Provide and fixing CP bottle trap for wash basin & urinal. All as per tech spec and drawings |
| 35 | Provide, install and test valves and taps of C.P. brass gun metal as specified, for 12 mm dia. C.P. pillar tap on wash basins. |
| 36 | Providing, installing, jointing, testing, pipes, pipe fittings, valves, flexible connections, as specified for water supply inside and outside buildings, all as per drawing and technical specifications for 25 mm bore G.I. piping of Class 'C' including all necessary fittings. |
| 37 | Providing, installing, jointing, testing, pipes, pipe fittings, valves, flexible connections, as specified for water supply inside and outside buildings, all as per drawing and technical specifications for 50 mm bore G.I. piping of Class 'C' including all necessary fittings. |
| 38 | Providing, installing, jointing, testing, pipes, pipe fittings, valves, flexible connections, as specified for water supply inside and outsidebuildings, all as per drawing and technical specifications for 12 mm dia C.P. bib cocks of Class 'C' including all necessary fittings. |
| 39 | Provide and fixing flexible PVC Connector pipe 12mm dia 450 mm long. All as per tech spec and drawings |
| 40 | Provide and install 600 mm x 450 mm size mirrors of approved make and as specified. All as per tech spec and drawings |
| 41 | Providing and fixing rain water pipe 150mm dia. Including all fittings, jointing and fixing with 50x6 mm clamps and bolts etc all complete |
| 42 | Providing and applying external paint with base coat of primer and 2 coats of external emulsion paint including all tools, tackles, scaffolding, consumables, lifting equipment, manpower, supervision, PPE's etc. all complete |
| 43 | Providing and fixing Cage ladder as per requirement all as per drawing and technical specifications. |
| 44 | Providing and fixing Anchor fastener mechenical of hilti or equivalent including all tools , tackles , manpower , drilling etc complete. |
| 45 | Providing fixing and testing PVC Water TanK of sintex make or equivalnet of 2000 ltr capacity including all fittings. |
| 46 | Providing, fabricating and fixing in position MS single shutter door as per specification drawings including MS hold fast, oxidisedbrass fittings and one coat of red oxide primer all as per drawing and technical specifications. |
| 47 | Providing, making and fixing PVC doors of sintex make or equivalent with single glazing of 4 mm thick ordinary glass with elastomeric gaskets in grooves for sealing air, gas and dust, oxidised brass hingesto fillings, min thickness of section 2.8 mm, all as per manufactures specifications complete. |
| 48 | Providing fabricating and fixing aluminium doors with standard extrudedsections having min 3mm wall thickness, swinging shutters with floor springs and pivots or Aluminium hinges, opening both ways and withfully glazed panels using 6mm thick ordinary sheet glass / frosted glass (if required) with anodised aluminium fittings. |
| 49 | WORKS OF GIS 300 |
| 50 | Providing and fixing colour coated sheets on roof , cladding , ridge, gutter etc including all tools and tackels with all required ppes. Please Enable Macros to View BoQ information |
