|
| 1 | Providing and fixing Canopy-tensile shed as per approved design by direction of engineer in charge. 15ft x 15ft. both side PVDF Coated Lacquered (M2/B1), 900 GSM Tensile Fabric having Breaking Strength (Warp/Weft) 4000/5cm&TearStrength (Warp/Weft) or more than 600N & 500 N. |
| 2 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 3 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. |
| 4 | Providing and fixing MS laser cut sheet including complete fixing at site with frame of MS tube (excluding MS tube) square as per approved design by direction of engineer in charge. Laser cut MS sheet 16 gauge |
| 5 | Providing and fixing hinges with necessary screws etc. complete : Hydraulic hinges |
| 6 | Providing and fixing fancy wardrobe handles (L) with necessary screws etc. complete |
| 7 | Providing and fixing SS grating 100 mm dia of approved quality, complete as per the directions of EIC. |
| 8 | Providing and fixing cuttlery tray for Kitchen Drawer/cutlery storage |
| 9 | Providing and fixing plain lining with necessary screw/nuts & bolt/nail, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid separately). 18mm thick commercial ply conforming to S: 1328 BWR type. |
| 10 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040mm bowl depth 200mm. |
| 11 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour or shade(area of slab over 0.5 sqm)16/18mm |
| 12 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 23 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. Extruded section profile size 48x40 mm. |
| 13 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 14 | Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality 1mm thick. |
| 15 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications. Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture. |
| 16 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 17 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 18 | Providing and fixing Wooden plastic composite panel with necessary screws/ nails on one face, and fixed on wooden frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately)23 mm thick WPC Panel. |
| 19 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position: Budloo / Fir wood. |
| 20 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 21 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 22 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc.20mm nominal outer dia pipes. |
| 24 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 26 | Providing and fixing 12 mm thick frameless toughened glass of approved brand and manufacture. Please Enable Macros to View BoQ information |
