|
| 1 | Part A- Extension of SDM Residence PahalgamEarth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 1 meter from cutting edge |
| 2 | Providing & Laying of stone soling (dully hand packed) including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Brick work with FPS bricks of class designation 75 in foundation & plinth in cement mortar 1:6 (1 cement , 6 coarse sand) i/c extra for Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto floor V. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for:a) Foundations, footings, bases of columns etc. for mass concrete. |
| 9 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.A) Bolts ( mm) |
| 10 | B) Flats 75x6mm |
| 11 | C) Gates |
| 12 | Providing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position first class imported wood (KD Wood) |
| 13 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood. 30 mm |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood. 30 mm |
| 15 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood. 30 mm |
| 16 | P/F of 12 mm thick imported wood paneling (newzealand pine or equivalent) of approved pattern overand including base of 10 mm thick plywood with frame work finishing exposed surface with two of more coats of touch wood and polish including cost of nails, adhesive material, cornices etc. and all carriages ( Design of panelling to be approved by EIC) |
| 17 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete 50 mm thick with 20mm nominal size stone aggregate. |
| 18 | Supplying, fitting and fixing 8mm thick AC4 Grade Waterproof Laminated wooden Flooring Work including cornice of required size with plank size not less than 1218 mm x 193 mm)with unilin/ tongue-groove locking arrangement having 0.2mm thick top abrasive layer over a decorative layer followed by a high-density fibreboard (HDF) having density> 850 kg/m3 substrate core over a resin saturated backing layer and installing through unilin or tongue-groove system ( having locking strength not less than 1000 kg/m) over a 2 mm thick underlayer polyurethane foam on polythene sheet 250 microns, over a smooth, flat, hard subfloor free from moisture (<8%), grease etc. complete in all respect with requiste accessories like end profile, transition profile, transition profile, reducer 'T' profile etc. wherever required and prepration of base including all other incidental works as per direction and satisfaction of Engineer in charge |
| 19 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws. 1st class deodar wood |
| 20 | P/F pre color coated CGI sheets incl. fixtures all ( measured for unit of laid area) 0.50mm thick (TATA, JSW Coloron plus or Equivalent) i/c all carriages. Ridges, valleys and Hips included. |
| 21 | Providing and fixing plained eaves boarding.2nd class kail wood 250x32 mm (nominal size ) |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 23 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown |
| 24 | Construction of wardrobes using BWR 19mm thick ply board (ply to ply) for frames, shutters. The job shall include fixing of dunmica of approved shade/ texture on all exposed surface, inner linnings prefebly white (Mica) hardware fittings like hinges, handles, tower bolts, locks , hanger rail etc as per requirements of architectural drawings or as directed by the Engineer-in-charge, complete job (600mm deep) face area to be measured |
| 25 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand )including all necessary carriages complete job. |
| 26 | Supply, installation, testing and commissioning of 1.5 Ton, 3-Star Inverter Type Split Air Conditioner (Hot & Cold), suitable for single phase 230V, 50Hz power supply, equipped with hermetically sealed rotary/inverter compressor using eco-friendly refrigerant R410A/R32, complete with indoor wall-mounted unit and outdoor condensing unit, wireless remote control, factory-charged refrigerant, and necessary mounting hardware. The work includes standard 5 metres of insulated copper refrigerant piping (suction and liquid line), interconnecting 3-core copper power/control cable, PVC condensate drain pipe, MS/GJ wall mounting brackets with nuts, bolts, vibration pads for outdoor unit, drilling/core cutting through wall for passage of pipe and cable with proper sealing and finishing, fixing, alignment, pressure testing, vacuuming, leak testing, refrigerant top-up if required, electrical connections to existing point, test run, commissioning complete |
| 27 | Engagement of Carpenter for door window fittings and other works of similar nature |
| 28 | Engagement of Labours for Grass brush cutting removal of mulba and works of similar nature |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 31 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area 40 sqcm. and above. |
| 32 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :150x10 mm |
| 33 | 100x10 mm |
| 34 | Providing and fixing bright finished brass door latch with necessary screws etc.complete. :200x10 mm |
| 35 | Providing and fixing bright finished brass handles with screws etc. complete125 mm |
| 36 | 75 mm |
| 37 | Providing and fixing one lighting point including wiring for light point in 1.5 Sq. mm PVC insulated copper wire with 2.5 Sq. mm PVC insulated multi- strand copper wire for lighting sub- mains, complete with 6 Amp one- way switch, 2mm thick PVC conduit/ channel with bends, junction boxes, 6 Amp SP MCB, 10 Amp DP MCB, 2- way distribution board (DB) for housing MCBs, hylem sheet with wooden box recessed in wall, and all neccessary accessories, complete in all respects as per site requirements and directions of Engineer-in-charge. |
| 38 | Carriage of material by mechanical transport by an average lead of 50 kmSand/ bajri |
| 39 | Part B - Septic and Soakage pit incl. fittings and fixtures for WashroomEarth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 1 meter from cutting edge |
| 40 | Providing & Laying of stone soling (dully hand packed) including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 41 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 42 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 43 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 44 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 45 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 46 | Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone. Nallah |
| 47 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 48 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate. |
| 49 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 Coarse sand) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) complete as per standard design inside size 45x 45 cm and 45 cm and 45 cm deep including cover with frame high duty) with common burnt clay F.P.S (non- modular) bricks of class designation 7.5 Complete Job |
| 50 | Providing and fixing of RCC Manhole cover with frame of size 450 mm x 450mm of approved quality and make complete |
| 51 | Carriage of material by mechanical transport by an average lead of 50 kmSand/ bajri |
| 52 | Bricks |
| 53 | Providing and fixing water closet (European type) with P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting |
| 54 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 55 | Providing & Fixing C.P. wall mixer of approved make jaguar/hindware/cera including cutting and making good the walls wherever required. |
| 56 | Providing & Fixing health faucet of approved make jaguar/hindware/cera including cutting and making good the walls wherever required. |
| 57 | Providing & Fixing C.P. tubes of approved make 450mm to 600mm longh |
| 58 | Providing and fixing of soap case of standard quality and make. |
| 59 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 60 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality Jaguar/hindware/cera make conforming to IS : 8931 |
| 61 | Providing and fixing of cockrach type CP grating of standard quality and make 100mm |
| 62 | Providing and fixing angle value for all points of jaguar/Hindware/cera standard quality and make including all accessories complete job |
| 63 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 64 | Providing and fixing PPR pipes incl. making good walls all complete.15mm Nominal Bore |
| 65 | Providing and fixing P.V.C. pipe and pipe fittings of the following nominal dia to P.V.C. Soil/Waste/Ventilating pipes, i) P/F PVC Door Tee 100mm dia of approved make type B |
| 66 | P/F PVC bend 100mm dia of approved make type B |
| 67 | P/F PVC Collar 100mm dia of approved make type B |
| 68 | P/F PVC bend 75mm dia of approved make type B |
| 69 | P/F PVC Collar 75mm dia of approved make type B |
| 70 | P/F PVC pipe 100mm dia of approved make Type B |
| 71 | P/F PVC pipe 75mm dia of approved make Type B |
| 72 | P/F PVC pipe 40 mm dia of approved make Type B |
| 73 | P/F PVC cowel over vent pipe of approved quality type B |
| 74 | P/F PVC Reducer 100x75 mm of approved quality type B |
| 75 | P/F Ms stays and clamps for PVC pipe. |
| 76 | P/F PVC floor traps 100 mm complete job |
| 77 | P/F gun metal ball valve of approved quality 25mm nominal dia |
| 78 | P/F 50 L hot water Geyser incl all fittings of approved make as direceted by EIC |
| 79 | Repair of PSO Quarter at SDM Residence Pahalgam.P/F pre color coated CGI Sheets incl. fixtures all . (measured for unit of laid area)0.50mm THICK (TATA, JSW COLORON PLUS OR EQ) I/C ALL CARRIAGES.Ridges,Valleys and Hips included |
| 80 | Providing wood work in frames of doors,windows,Clerestory windows and frames, wrought framed and fixed in position with hold fasts or lugs or with fasteners of required dia and length (Hold fast lugs or with dash fasteners shall be paid separately). KD Wood |
| 81 | P/F of 12mm thick plywood including fixing and carriages all job complete. |
| 82 | P/F of 3.5 mm thick glazing in windows all complete including beading as directed by EIC. |
| 83 | Part C- Furniture & furnishingProviding and supplying of Queen Size Bed (approx. 1980 mm × 1525 mm) made of approved quality seasoned hardwood/teak wood or engineered wood, including headboard and side panels of standard design. The bed shall be sturdy in construction with proper supports, slats/ply base (12 mm thick commercial ply or better), and finished with melamine/French polish/laminate as approved. The item includes cost of all materials, labour, fittings, fixtures, carriage, loading/unloading, taxes, and complete installation at site as directed by the Engineer-in-Charge. |
| 84 | Providing and supplying of Dining Table Set comprising 01 No. dining table with 06 No. chairs, made of approved quality seasoned hardwood/teak wood (or engineered wood as per requirement), including all necessary fittings and fixtures. The dining table shall be of standard size (approx. 1800 mm × 900 mm × 750 mm height) with smooth finished top, properly polished with melamine/French polish of approved shade. The chairs shall be ergonomically designed with proper back support and cushioned seats (foam with rexine/fabric upholstery of approved quality), complete in all respects. The item includes cost of all materials, labour, carriage, loading/unloading, taxes, and installation at site as directed by the Engineer-in-Charge. |
| 85 | Providing and supplying furnishing for Queen Size Bed (approx. 1980 mm × 1525 mm) including spring type mattress of standard make (minimum 5–6 inch thick) with high-density foam support and fabric covering of approved quality. The item also includes pillows (02 Nos.) with covers, bed sheet (02 Nos.) of standard cotton quality, and minor refurbishing of existing bed such as tightening of joints, minor repairs, and surface polishing wherever required. The work includes cost of all materials, labour, carriage, loading/unloading, and complete placement at site as directed by the Engineer-in-Charge. |
| 86 | Supply, installation, testing and commissioning of 5 Star Fully Automatic Top Load Washing Machine of reputed make, having capacity 6.5–7.5 kg, with all standard accessories, inlet/outlet pipes, including transportation, loading/unloading, complete in all respects as per site requirements and directions of Engineer-in-Charge. (approved make Whirlpool / LG/ Godrej) |
| 87 | Supply and placing of Wooden 5-Seater Sofa Set (3+1+1 configuration) made of seasoned hardwood (teak/deodar or equivalent) frame, upholstered with high-density foam (40 density or above) and superior quality fabric, including armrests, proper back support, and smooth polished/laminated finish, complete with all fittings and accessoriess.3-Seater: approx. 1800 mm (L) × 750 mm (D) × 800 mm (H)Single Seater (each): approx. 750 mm (L) × 750 mm (D) × 800 mm (H) Please Enable Macros to View BoQ information |
