|
| 1 | DESCRIPTION OF ITEMS |
| 2 | Taking down chowkhats or Frames with shutter (without taking off shutter from frames) of any description n. exc. 1.50 Sqm each complete. |
| 3 | Taking down chowkhats or Frames with shutter (without taking off shutter from frames) of any description exc. 1.50 but n. exc. 4.00 Sqm each complete. |
| 4 | Taking down shutter of any description exc. 1.00 but n. exc. 2.00 Sqm each complete. |
| 5 | Taking down shutter of any description n. exc. 1.00 Sqm each complete. |
| 6 | S & F 30 mm thick Flush shutters , solid core construction, with block board core and plywood face panels one face is covered with decorative face veneer with lipping/ frame to match fixed to chowkats complete all as specified and directed. |
| 7 | S & F 35 mm Factory made plain framed, panelled shutter (two panel) of 2nd HW rails and styles with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 8 | S & F 2 nd class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive wiremesh, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wiremesh sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed.Note: wire mesh shall be measured and paid separately in respective supply only item. |
| 9 | S & F 2 nd class hard wood 35 mm thick Glazed and skeleton shutters, but divided into squares, with plain,chamfered or rounded, mitred and rebated sash bars any numbers to recieve glass, gauge, mesh etc sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item. |
| 10 | supply only Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm complete as specified and directed. Note- steel wire cloth can be fixed in any type of window, ventilators or doors i.e. aluminium ,steel windows or glazed doors. |
| 11 | M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed. |
| 12 | M & L for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 13 | S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 14 | S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be following specification complete all as specified and as directed by Engr-in-charge.(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick.(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(iv) 4 mm thick tinted glass superior quality.(v) IDPE Rubber guasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos.(vii) Sliding rollers per shutter - 02 Nos.(viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. |
| 15 | S & F powder coated aluminum door with the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a) Cross section of chowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick.(e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) 4mm thick tinted glass make Modi, float . (g) Aluminum handle eisc type -02 Nos per shutter ( inside & out side). (h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j) Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter. |
| 16 | M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed. |
| 17 | S&F for PVC door frames of sizes 50 x 47 mm made out of 5 mm plain PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed. |
| 18 | S&F Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded plain PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of plain PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 19 | M & L for Pressed steel frames for doors of size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 20 | M&L for PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as in filling of pressed steel frame complete all as specified and directed. |
| 21 | S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed. |
| 22 | S & F for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified |
| 23 | S & F for 125 mm long Aluminium handles, cast type, anodised complete all as specified |
| 24 | S & F for 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified |
| 25 | S & F stainless steel butt hinges 100mm size x 14 gauge, 2mm thick for shutters complete all as specified and directed. |
| 26 | S&F in repairs 18 mm thick factory made PVC celuka ply sheet one side pre-laminated sheet for kitchen cabinet shutter, Almirah shutters having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. The 18mm thick sheet shutter should bent at 90 degree and should be finished at all edges with edge bonding tape 0.5 mm thick PVC sheet lapping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge. |
| 27 | S&F in repairs 18 mm thick factory made PVC celuka ply sheet both side white for kitchen cabinet shelf, Almirah shelf having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. The 18mm thick sheet shutter should bent at 90 degree and should be finished at all edges with edge bonding tape 0.5 mm thick PVC sheet lapping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge. |
| 28 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with size of flaps 30mm (when open) complete all as specified and directed. |
| 29 | S & F stainless steel Door handles 100mm size for wardrobe, cabinet shutters complete all as specified and directed. |
| 30 | S & F stainless steel tower bolts 150mm size for wardrobe, cabinet shutters complete all as specified and directed. |
| 31 | S & F of door catcher magnet for wardrobe, cabinet shutters complete all as specified and directed. |
| 32 | S & F Hasp and staple 100mm, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 33 | S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed |
| 34 | S & F in repair brass Mortice lock vertical type of size 100mm with 2 levers including escutcheon plate and two keys complete all as specified and directed. |
| 35 | S & F in repair of Galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mmin Aluminium/wooden/steel windows, doors, ventilators and fixed with and including necessary fixing arrangement including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified and directed. |
| 36 | M & L in repair for Prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specfied. |
| 37 | S & F teakwood lipping 6mm thick fixed to edges with nails complete. |
| 38 | M & L in repair for Beads of first class hardwood, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.. and removing old beads to Store |
| 39 | S & F in repair Mild steel barrel tower bolts 100mm , stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 40 | S&F in repairs of Mild steel pressed handles 150 mm, oval type, stove enamelled black complete all as specified |
| 41 | S & F in repair of mild steel door closer 300mm, ordinary rat tail rod pattern springs including roller and roller plate completecomplete all as specified and as directed |
| 42 | S & F in repairs of aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed. |
| 43 | S & F in repair of Mild steel sliding door bolts of length 300mm , plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 44 | S & F in repair of Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 45 | S & F in repair of Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed. |
| 46 | Dismanling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 47 | M & L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:6, complete all as specified and directed. |
| 48 | M&L glazed ceramic coloured tiles size 300mm x 450 mm 6-7 mm thick (Colour and design of tiles as approved) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 49 | M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed in cement mortar 1:6, complete all as specified and directed. |
| 50 | All as per item No 48 above but in skirting over & including 10mm thick screed in CM 1:4 complete all as specified and directed. |
| 51 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete. |
| 52 | S & F of suspended ceiling system of grid/section of size 600x600mm comprising of interlocking GI powder coated main T-runners of size 24x38x0.33mm thick of length 3000mm, cross-T of size 24X32X0.33mm thick of length 1200mm and secondary intermediate cross-T of size 24X32X0.33mm thick of length 600mm and perimeter wall angle of size 24x24x0.40mm thick of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs @ 450mm center to center and 40mm long dry wall S.S. screws with and including 4 mm thick E-board false ceiling tiles of size 595x595mm of approved texture, design and pattern to be placed in the grid system duly suspended with 6 mm dia GI wire hangers fixed with steel dash fasteners or from purlin of the roof with clip complete all as specified and directed. |
| 53 | Dismantling timber scantling 40 Sq. cm. and over framed work in any position. |
| 54 | S & F II classs hard wood timber scantling clean sawn framed and fixed in any position and direction complete all as specified and directed. |
| 55 | S & F of rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides fixed with angle cleats or other connecting plates conforming to Gde Fe-410 W complete all as specified and as directed. |
| 56 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 57 | Dismantling of AC corrugated, semi-corrugated sheets in roof coverings & ridges. |
| 58 | S & F of pre-painted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick wave tile pattern of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws/L-type or J-type or cranked hook bolts complete all as specified and directed. |
| 59 | S & F of pre-painted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge of roof covering / cladding to wall, fixed with self tapping screws/L-type or J-type or cranked hook bolts complete all as specified and directed. |
| 60 | S & F of PVC wall panelling over existing tile/plastered surfaces with high quality PVC wall panel/sheets (7-9mm thickness) of approved texture, design and patterns complete with all fittings like cleats, nails, screws etc & all other necessary fittings complete all as specified and directed. |
| 61 | S & F in repair of vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding ccomplete all as specified and directed. |
| 62 | S & F in repairs vitreous china wash hand basin with padestal white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete. |
| 63 | S&F in repair Table/counter top wash hand basins, vitreous china,of standerd size (480mm x 550mm) having any shape (ractangular, oval, square, circular etc) including 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete. |
| 64 | S & F in repairs of padestal pattern Vitreous china wash down water closet pan white including trap,PVC seat cover white, connection to drain (or out going pipe ) and to flushing pipe antisyphone pipe etc complete. |
| 65 | S & F in repair of Vitreous China Urinal, Half stall type,\ white (excluding flushing cistern, flush pipe and waste pipe)Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe |
| 66 | S&F in repair 15 mm bore basin mixer (swan neck) Fancy Type brass chromium plated with capstan heads screwed down high pressure with or without letter ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed. |
| 67 | S&F in repair of 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed. |
| 68 | S & F in repair of 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and directed. |
| 69 | S & F in repair of CP fancy type angle valves,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed. |
| 70 | S&F in repairs of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and as directed. |
| 71 | S&F in repairs of fancy type chromium plated two way bib cock of 15mm bore ,screwed for iron pipe or brass ferrule etc complete all as specified and as directed. |
| 72 | S& F in repairs of sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 60mm wide with chromium plated bracket guard and railing 500mm long complete all as specified & directed. |
| 73 | S&F in repairs corner glass shelf 5.5mm thick with aluminium bracket and railing as per sample, complete all as specified and as directed. |
| 74 | S&F in repairs of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 75 | S & F in repair of PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 550 x 450mm complete all as specified and directed. |
| 76 | S&F in repairs of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and as directed. |
| 77 | S&Fin repair of PVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs complete all as specified and directed. |
| 78 | Supplying and laying of CPVC pipes 15mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified. |
| 79 | S&F in repair of 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed. |
| 80 | S&F in repair of 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed.. |
| 81 | S&F in repair of PVC ( SWR) bends any radius bore of 110 mm all as specified and directed. |
| 82 | S&F in repair of PVC ( SWR) bends any radius bore of 75 mm all as specified and directed. |
| 83 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc. |
| 84 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour ( Glossy finish), design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 85 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed. |
| 86 | M & L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base for pavement , path, floor etc, complete all as specified and directed. |
| 87 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection Finishing surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed. |
| 88 | M&L brick work with Sub Class 'B' bricks straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed. |
| 89 | Taking down cement plaster of any description on brick or stone walls, ceiling etc including rakking out joints , hacking for key , scrubbing down with water at any height etc all as specified and as directed. |
| 90 | M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and fair without using extra cement complete, etc. all as specified and as directed. |
| 91 | M & L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and fair without using extra cement complete all as specified and directed.. |
| 92 | M & L rendering 15 mm thick in cement mortar 1:4 in two layers WPC as per manufactures instruction, surfaces, surfaces finished even and fair using extra cement complete all as specified and directed.Note:- WPC will be measured and paid separately. |
| 93 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 94 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer over a coat of putty complete all as specified and directed. |
| 95 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 96 | M & L for cutting holes in brick walls built in cement mortor at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM 1:3 and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete as directed and specified. |
| 97 | M & L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixingapproved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. Please Enable Macros to View BoQ information |
