|
| 1 | Item No.1 : Excavation in all kinds of Soils & Soft murum including boulders up to 0.6 m diameter (0.113cum) for foundation and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile with all lead and lift. including 1 % Cess for labour welfare etc. Complete . |
| 2 | Item No.2 : Excavation in Hard Murum including boulders up to 0.6 m diameter (0.113 cum) for foundation and placing the excavated material neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile with all lead and lift. including 1 % Cess for labour welfare etc. Complete . |
| 3 | Item No. 3 : Excavation in Soft Rock without blasting including boulders up to 0.6 m diameter (0.113 cum) for foundation , and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile with all lead and lift. including 1 % Cess for labour welfare etc. Complete . |
| 4 | Item No.4 : Dewatering of foundation during excavation with Pump including diversion including 1 % Cess For Labour Welfare etc. complete ( 1 % Of Amount of work up to NBL ) |
| 5 | Item No 5 : Providing and fixing in position TMT - FE -500 bar reinforcement of various diameters for RCC works as per detailed designs and drawing ,including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed with all lead & lift including 1 % Cess For Labour Welfare etc complete. |
| 6 | Up To NBL |
| 7 | Above NBL |
| 8 | Item No. 6 : Providing and laying in situ cement concrete of grade M-15 1:2:4 (40 MSA) , for Main Weir ,key wall , wing wall,end weir , of trap / granite / gneiss / quartzite /graded metal for PCC wirth or without surface reinforceent / RCC Concreting with Concrete Mixer with shuttering and scaffolding including placing, compacting, curing including 1 % Cess on labour welfare excluding royalty of material, etc complete . |
| 9 | A ) Up to Nala Bed Level |
| 10 | B ) Above Nala Bed Level |
| 11 | Item No. 7 : Providing and Laying of Quarry Spalls of approved trap stone quality of specified thickness including hand packing etc. complete as per specifications & approved drawing as directed with all lead and Lift etc. complete. for water cushion & apron ( With Available / borrow material ) Excluding royalty charges of material including 1 % Cess For Labour Welfare etc. complete . |
| 12 | With Borrowe Material |
| 13 | Item No.8 : Providing and constructing 230 mm thick dry rubble stone pitching using stones and stone chips from approved source from borrow area including cost of all materials, labour, hand packing / wedging stone chips, finishing etc., complete with all lead and all lifts excluding royalty of material. including 1 % Cess for labour welfare etc. complete . |
| 14 | With Borrowe Material |
| 15 | Item No.9 :- Providing & Fixing M.S.Chanells Of Size 100*100*6 mm As Per Design & Drawing Including Cutting Welding painting in two coats & Fixing in Position as directed For Smooth Working of FRP Needle / Mild steel Needle with all lead & lift etc.complete. |
| 16 | Item No. 10 :- Providing and fixing at site Straight Needle K.T. Weir Gate with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron |
| 17 | Item No 11 : Providing and fixing information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal-able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge including 1 % Cess for labour welfare etc. Complete . |
| 18 | Item No.12 : Royalty Charges For Construction Material |
| 19 | For Sand |
| 20 | For Other Minerals |
| 21 | Item No.13 : Testing Charges ( Quality Control ) |
| 22 | E) Compressive strength of cement concrete M-15 40 MSA ( Conventioal Curing Tank ) |
| 23 | F ) Steel weight / meter ,Tensile Strength & Elongation of steel |
| 24 | G )Stone - Water Absorption & Specific Gravity |
| 25 | Item No.14 : Insurance 1 % |
| 26 | Item No.15 : CGST 9 % |
| 27 | Item No.16 : SGST 9 % Please Enable Macros to View BoQ information |
