|
| 1 | Dismantling of roof brick tiles fixed in cement mortar in single layer ; Complete all as specified and directed |
| 2 | Demolition mud phuska in roofs any thickness including plastering and leeping, removing debris and rubbish from the site Complete all as specified and directed. |
| 3 | Material and Labour for plian Cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof padding (average 40mm thick), roof kerbs or mud stops, rounded or chamfered on edge ; Complete all as specified and directed. |
| 4 | Material and labour for APP based polymeric membrane minimum weighing 3kg / Square Metre and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/Square Metre) laid on primed surface by forced application over a tack coat of industrial bitumen 85/25 at the rate of 1.6 kg per sq.m including cleaning surfaces and including 10 mm thick 1: 4 cement plaster on padding surface ; Complete all as specified and directed. |
| 5 | Material and labour for 40 mm thick brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and flush pointing as work proceed in CM cement mortar 1:3 Complete all as specified and directed. |
| 6 | All as per Srl item 05 above here-in-before but except tiles.Note : (i) Serviceable brick tiles obtained from dismantling shall be reused. |
| 7 | Material and Labour for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in bed blocks for hold fast, Kerb & similar work etc ;in repair Complete all as specified and directed. |
| 8 | Taking down cement plaster on brick, concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. of any description , removing debris and rubbish from the site ; Complete all as specified and directed. |
| 9 | Material and Labour for 12mm thick cement plastering in cement mortar 1:6 on brick or concrete surfaces, finished the surfaces even and smooth without using extra cement ; Complete all as specified and directed. |
| 10 | Material and Labour for 5 mm thick cement plastering in cement mortar 1:3 on ceiling surfaces, finished the surfaces even and fair without using extra cement ; Complete all as specified and directed. |
| 11 | Material and Labour for Rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished fair and even surface without using extra cement using WPC @ 3 % weight of cement etc. complete as per manufacturer instructions all as specified and directed. Note : WPC will be measured and paid separately under appropriate item. |
| 12 | Material and Labour preparation of new plasrered walls surface and applying Acrylic Smooth exterior paint of required shade including priming coat of exterior primer complete all as specified and directed. |
| 13 | Material and Labour for applying Acrylic Smooth exterior paint of required shade including preparation of Old surfaces Complete all as specified and directed |
| 14 | Supply only integral water proofing compound confirming to IS-2645 complete all as specified and directed. |
| 15 | Material and Labour for preparation of new plaster surface and applying two coats of Oil bound distemper of wall over a coat of primer on wall surfaces ; Complete all as specified and directed. |
| 16 | Material and Labour for preparation of new plaster surface and applying two Coats white wash on wall ; Complete all as specified and directed. |
| 17 | Material and Labour for preparation of new plaster surface and applying two coats of white wash on ceiling ; Complete all as specified and directed |
| 18 | Material and Labour for Complete removal of existing treatmnet of plastered surfaces on walls applying two coats of Oil bound distemper over a coat of primer and prepartion with wall care putty ; Complete all as specified and directed. |
| 19 | Material and Labour for one coat of white wash on old treated plastered surface on walls including preparation of old decorated surfaces ; Complete all as specified and directed, |
| 20 | Material and Labour for one coat of white wash on old treated plastered surface on ceiling incl. prepartion of of old decorated surfaces ; Complete all as specified and directed. |
| 21 | Taking down chowkats with shutter n.exc 1.50 Square Metre each (without taking off shutter for the chowkats ) ;and removal Complete all as specified and directed. |
| 22 | Taking down chowkats with shutter exc 1.50Square Metre but n.exc 4 Square Metre (including CB shutters with chowkhat) ; and removal Complete all as specified and directed. |
| 23 | Supply and Fixing of pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges including Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, ; Complete all as specified and directed. |
| 24 | Supply and Fixing of pressed steel frames 1.25mm thick for door size of frame 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges including Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, ; Complete all as specified and directed. |
| 25 | Supply and Fixing of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, including necessary fittings , MS steel hinges and screws , supply & fixing in opening as per specification & drawing ; Complete all as specified and directed. |
| 26 | Supply and Fixing of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supply & fixing in the frame at site as per specification & drawing including including necessary fittings , MS steel hinges and screws etc . ; Complete all as specified and directed. |
| 27 | Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 28 | Supply and Fixing of factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels. Commercial type on both side ; Complete all as specified and directed. |
| 29 | Supply and Fixing of factory made IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats ; Complete all as specified and directed |
| 30 | Supply and Fixing of mild steel work Fe 410-W(Gde-E- 250) quality-A Fe in framed work as in door frame, shutter or gates of angle iron or other section with gusset plates,rails,braces etc complete drilled for fixing of steel sheeting or orther covering doors etc to be prepared for hanging or sliding with and including either sheet, hooks and hinges or steel hanging door fittings and hanging also fastening ; Complete all as specified and directed.l |
| 31 | Supply and Fixing of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; Complete all as specified and directed. |
| 32 | Supply and fixing in repair 18 mm thick PVC board as in cupboard shelves, in kitchen cabinet etc ; Complete all as specified and directed. |
| 33 | Supply and Fixing aluminium anodised barel tower bolt of extrud sec 150mm long ISI marked. ; Complete all as specified and directed |
| 34 | Supply and Fixing extruded aluminium alloy handle fabricated type anodized of size 150 mm long ISI marked. ; Complete all as specified and directed |
| 35 | Supply and Fixing 300mm long aluminium alloy,anodised ,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded sectionsor cast aluminium alloy ; Complete all as specified and directed |
| 36 | Supply and Fixing 300mm, mild steel ordinary rat tail rod pattern springs,including roller and roller plate ; including necessary repair to milg steel frame and welding Complete all as specified and directed |
| 37 | Supply & fixing in repair Steel window 1.25mm thick box type ERW hollow P section of each frame size 60mmx25mm double rebated comprises of glazed & gaused Skelton shutter ERW section 50mmx20mm & 1mm thick with one openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) pintol hinges 12 x 75 mm - 2 Nos each leaf |
| 38 | Supply & fixing in repair mild steel box type ventilator fixed type with glazing bar with mesh & glass primer coated complete all as specified. |
| 39 | Supply & fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed on steel frame, in squares not exc 0.50 Square Metre in each panes complete all as specified. |
| 40 | Supply and Fixing mild steel framed work such as grills,grating ,etc with ends of bars , just as in doors, ventilators, and as in hold fast,ladders,railings,Framed Guard bar ,railings etc with ends of bars shouldered and/or riveted complete welded hinged and similar work Conforming to Fe-290 Gde-E-165 ; Complete all as specified and directed |
| 41 | Supply and Fixing figured glass pin head type, 3mm thick ordinary quality, in any shape, not exceeding 0.50 Square Metre in each pane including and glazing with oil putty ; Complete all as specified and directed |
| 42 | Supply and Fixing in repair rotational moulded polytheylene triple layered white water storage tanks of capacity 500 Litres (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank and 20mm dia brass float valve with brass rod ; and removal Complete all as specified and directed |
| 43 | Supply and Fixing in repairs of stop value 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc ; Complete all as specified and directed |
| 44 | Taking up and down GI pipe 15mm bore including fittings, connection, including cleaning for refixing in any position ; Complete all as specified and directed |
| 45 | Taking up and down GI pipe 20mm bore including fittings, connection, including cleaning for refixing in any position ; Complete all as specified and directed |
| 46 | Supply and Fixing GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked including cutting chases in walls, floors, etc. and their making good in the case of concealed pipe work ; Complete all as specified and directed |
| 47 | Supply and Fixing GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked including cutting chases in walls, floors, etc. and their making good in the case of concealed pipe work ; Complete all as specified and directed |
| 48 | Supply and Fixing, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm ; Complete all as specified and directed |
| 49 | Supply and Fixing in repairs bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs ; Complete all as specified and directed |
| 50 | Supply and Fixing in repairs stop valves(Concealed cock) 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc ; Complete all as specified and directed |
| 51 | Supply and Fixing in repairs stop valve/angel valves 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc ; Complete all as specified and directed |
| 52 | Supply and Fixing in repairs CP shower rose 125 mm size with swivel joint fancy type including fixing to steel pipe or union ; Complete all as specified and directed |
| 53 | Supply and Fixing in repairs vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc including lime concrete in lime mortor 1:3 usisng broken bricks 40mm graded coarse aggregate ; Complete all as specified and directed |
| 54 | Supply and Fixing in repairs PVC low level flushing cistern 10 ltr capacity, with syphonic action PVC float valve, brackets and 32mm bore PVC flush pipe etc ; Complete all as specified and directed |
| 55 | Supply and Fixing in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm ; Complete all as specified and directed |
| 56 | Supply and Fixing in repairs Vitreous china wash basin(with pedastal),white flat back,size 550x400mm excluding taps but including brackets,32 mm waste pipe and 32mm brass(CP) waste coupling ; Complete all as specified and directed |
| 57 | Supply and Fixing as in repairs looking mirror 600mm X 450mm(min size) with PVC frame of selected quality glass fancy type as approved by GE and fixed to wooden plugs with chromium plated brass screws and cup washers ; Complete all as specified and directed |
| 58 | Supply and Fixing as in repairs Pillar taps 15m m bore, cast copper alloy but fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed ; Complete all as specified and directed |
| 59 | Supply and Fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long embedded in the wall ; Complete all as specified and directed |
| 60 | Supply and Fixing in repair brass chromium plated towel rail `D’ type 60 cm long fixed to wall ; Complete all as specified and directed |
| 61 | Dismantling of cast iron ,PVC or SGSW drain pipes with fitting , jointed in cement mortar and taking out of trenches , if required ; Complete all as specified and directed |
| 62 | Supply and Fixing 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor ; Complete all as specified and directed |
| 63 | Supply and Fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor ; Complete all as specified and directed |
| 64 | Supply and Fixing PVC (SWR ) bends with access door 75 mm bore any radius ; Complete all as specified and directed |
| 65 | Supply and Fixing PVC (SWR ) bends with access door 110 mm bore any radius ; Complete all as specified and directed |
| 66 | Supply and Fixing PVC (SWR ) vent cowl 110 mm bore ; Complete all as specified and directed |
| 67 | Material and Labour for PVC (SWR ) floor trap 75 mm plain with grating including jointing with solvent cement as per site requirement ; Complete all as specified and directed |
| 68 | Material and Labour for PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement with grating as per site requirement ; Complete all as specified and directed |
| 69 | Material and Labour for preparation of new wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of primer ; Complete all as specified and directed |
| 70 | Supply & fixing in reapair 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc. |
| 71 | Demolition of brick work built in cement mortar or cement lime mortar as cutting, opening of exsiting wall including disposal of unserviceable material,debris and rubbish ; Complete all as specified and directed |
| 72 | Material and Labour for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 ; Complete all as specified and directed. |
| 73 | Material and Labour for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in cement mortar 1:4 ; Complete all as specified and directed |
| 74 | Demolition of Stone slabs and tiles of laid, beded and pointed of any mortar in any description or thickness in floors, aprons etc. including disposal of unserviceable material,debris and rubbish ; Complete all as specified and directed |
| 75 | Material and Labour for Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or beding in cement mortar 1:4 ; Complete all as specified and directed. Please Enable Macros to View BoQ information |
| 76 | Material and Labour for Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or beding in cement mortar 1:4 ; Complete all as specified and directed. Please Enable Macros to View BoQ information |
