|
| 1 | Taking down existing water proofing treatment of any description incl PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and prepairing it for further treatment incl make good necessary dubbing out wherever required and removing rubbish from site complete all as specified and directed. |
| 2 | M & L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532: 2017 over a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using Butane Torch and sealing all joints, overlapping etc. as per Annex D of IS 16532: 2017 complete all as specified and as directed. |
| 3 | M & L for ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the complete Roof slab at least for 72 hrs complete all as specified and directed. |
| 4 | M & L for cement concrete type B0 1:2:4 (12.5mm graded aggregate ) benching/ angle filleting at the junction of parapet and RCC roof complete all as specified and as directed. |
| 5 | M & L for cutting grooves or chase in brick wall, 75 mm wide and 65 mm deep and including filling with cement mortar 1:4 mixed with water proofing as mentioned in Annex D of IS 16532: 2017, IS 16540: 2017 compound complete all as specified and as directed. |
| 6 | Material & labour for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with liquid water proofing compound @ 250 ml per Bag or as per manufacture's Instructions, by weight of cement or manufacturer instruction all as specified. (Note;- water proofing compound shall be measured and paid separately as supply only) |
| 7 | M & L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate mixed with water proofing compound as levelling course of roof padding finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid for separately. |
| 8 | M&L for grout of permanent bonding of strutural damage/crack, porosity of concrete to attend leakage/seepage with pressure grouting with 15mm bore GI Pipe Nozzle under the pressure of 5 kg/sqcm using cement based grout, treatment to be made as per instruction complete all as specified |
| 9 | M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and diretced |
| 10 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement motar bedding (but not backing), removing serviceable tiles to stores and rubbish of the premisses |
| 12 | M & L for Vitrified Ceramic tiles of Dark Shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.38 Sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incliding screed bed 15cm in CM (1:6) complete all as specified and directed. |
| 13 | Ditto as in Item 12.00 Above but on Skirting with 10mm thick CM (1:4) as in backing coat complete all as specified and directed. |
| 14 | M&L Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over 10mm thick CM (1:4) as in backing coat complete all as specified and directed. |
| 15 | M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding 10mm thick CM (1:4) as in backing coat complete all as specified and directed. |
| 16 | Demolition of Brickwork or Stone Boulder Masonary, Bulit in Cement Mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engr-in-Charge |
| 17 | M & L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge |
| 18 | M & L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge |
| 19 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons or Platforms laid bedded in any type of mortar complete all as specified and as directed by Engnr-in-Charge etc. |
| 20 | M&L Granite of 20 mm thick (of any type and colour) work (table rubbed/grinding/ moulding and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin counter and like over and including 20 mm screed bed in CM 1:3 all as specified and directed. |
| 21 | Complete all as specified in Item 20.00 above but except stone complete all as specified and as directed by Engineer-inCharge |
| 22 | Providing edge moulding to 18-20mm thick Granite Stone of any Type stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. |
| 23 | S & F in Repair, Table top Ceramic Wash Basin Wash Basin of Make Cera (Cat No S2020176) of size 600 x 400 x 160 mm or equivalent including Supply and Fix in Repair Bottle Trap of PTMT bottle traps of Dia 32 mm, for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, Including PVC connections 15 mm size with PTMT nuts of length 600 mm, including waste pipe complete all as specified and as specified and as directed by Engnr-in-Charge |
| 24 | S & F in Repair, Waste coupling chromium plated (half or full threaded) (Minimum weight 32 mm 45 gms/40 mm-60 gms), Bore dia of only fixed in discharge pipe (mm) |
| 25 | S&F in repair 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed by engr in charge. |
| 26 | S & F in Repair ISI marked 15mm bore stop valves/angle valve cast copper alloy fancy type chromium plated , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 27 | S & F in repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed by the Engineer-in-Charge. |
| 28 | Supply and Fixing in repairs for 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern, PVC flushing pipe of suitable length and PVC connection 450mm long. complete all as specified and as directed by the Engineer-in-Charge |
| 29 | Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern |
| 30 | Supply and fixing for ISI marked 15mm bore, fancy type bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outer outlet dia of 75 mm, complete all as specified and as directed by Engnr-in-Charge. |
| 32 | Supply and Fix Shelf chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed by Engineer in Charge. |
| 33 | S & F Aluminium Anodised Tubular towel rail, 20 mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge |
| 34 | S & F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe), |
| 35 | Supply and Fix in repair Push tap, suitable for urinals, any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms) 15 mm bore dia of pipe in, |
| 36 | Supply and Fix in Repairs, Waste coupling chromium plated suitable for urinals and 32 mm bore dia of discharge pipes (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms |
| 37 | Supply and Fix in Repair, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 38 | Supply and Fix in Repair Bottle trap chromium plated having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and as directed. |
| 39 | Supply & fixing in repair PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls including clamps complete all as specified and directed. of the following bore of pipe:- |
| 40 | (a) 110mm |
| 41 | (b) 75mm |
| 42 | Supply & fixing in repair PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed. of the following bore of pipe:- |
| 43 | (a) 110mm |
| 44 | (b) 75mm |
| 45 | Supply & fixing PVC (SWR) junction single (single `T') equal or unequal with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 46 | (a) 75mm |
| 47 | (b) 110mm |
| 48 | Supply & fixing PVC (SWR) PVC (SWR) vent cowl inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 49 | (a) 75mm |
| 50 | Supply & fixing PVC (SWR) double (double Y) equal or unequal with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 51 | (a) 75mm |
| 52 | (b) 110mm |
| 53 | Supply & fixing in repair PVC (SWR) pipe bend with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 54 | (a) 75mm |
| 55 | (b) 110mm |
| 56 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 57 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 58 | Material and Labour for Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 59 | Ditto As in Item No. 47.00 above but of Ditto but of Frame size 65x 125 mm |
| 60 | M&L for cement concrete type B0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frame of pressed Steel or as in Jambs and bed blocks or as in coping as desired by executives and like etc complete all as specifed and directed |
| 61 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 62 | Factory made single extruded WPC (Wood Polymer Composite) wire mesh door shutter of 35 mm size glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 63 | S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge. |
| 64 | S&F for 150 mm aluminium handles, cast type, anodised complete all as specified. |
| 65 | S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified. |
| 66 | S&F 300mm long aluminium allooy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 67 | S&F for 100mm Mild steel butt hinge complete all as specified and directed. |
| 68 | S&F Veneered decorative plywood of 18 mm Thickness, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber/Plywood frame work complete all as specified and as directed by Engineer-in-Charge |
| 69 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps 30 mm/40 mm when opened complete all as specified and as directed by Engineer-inCharge |
| 70 | S&F for 75 mm aluminium handles, cast type, anodised complete all as specified. |
| 71 | Rim latch with two leversof 100 mm size and of mild steel body. stove enamelled finish; with brass knob or lever handle and fixed |
| 72 | S&F Curtain Rods (Minimum Outer Dia 25 mm) anodised aluminium alloy along with supply and fixing brackets (Fancy Type) on Windows Doors and Cupvoards etc complete all as specified and as directed by Engineer In Charge |
| 73 | Providing and fixing factory made uPVC white colour Sliding window Three track (Area may exceed 2.00 Sqm) made of extruded profiles with wall thickness of 2.3mm (+ 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 74 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T pofile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)(A) Area not exceeding 1.00 sqm each |
| 75 | Material and Labour for Supply and Fix Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge |
| 76 | S&F Sheet glass 4 mm thick or any suitable thickness in Windows fixed in aluminium/wooden/uPVC frame using oil putty or any suitable and acceptable meanscomplete all as specified and directed by Engr in charge. |
| 77 | Ditto As in Item No. 65.00 Above but glass is ground or obscured or frosted, on one side |
| 78 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified & directed. |
| 79 | M & L for preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying Two coat of synthetic enamel paint over one coat of pink primer complete all as specified & directed. |
| 80 | M & L for preparation of old or new painted steel surfaces of any description, not otherwise described over 10 cm width or girth and applying Two coat of synthetic enamel paint (On new surfaces over one coat of Primer) complete all as specified & directed. |
| 81 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 82 | Supplying and laying of CPVC pipes SDR 11 of outer diameter 20 mm & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors all inclding concealed pipes whereven necessary complete all as specified. |
| 83 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 84 | Supplying and laying of CPVC pipes SDR 11 of outer diameter 25 mm & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors all inclding concealed pipes whereven necessary complete all as specified. |
| 85 | S&F 20mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 86 | Taking down cement plaster of any description incl Tezzao finish as in dado/ skirting of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 87 | M&L for 10 mm thick rendering in CM 1:6 on fair face of brick/ concrete surfaces finished fair and even without using extra cement complete all as specified and directed. |
| 88 | M&L 15 mm (5mm in CM 1:4 with WPC +10mm in CM 1:6 ) thick in two layers rendering in cm 1:4 on fair aces of bricks walls surface finished even and smooth without using extra cement including water proofing compound all as specified and directed. (water proofing compound measured and paid seperately) |
| 89 | M&L 10 mm thick rendering in CM 1:3 in ceiling on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement. |
| 90 | M&L complete removal of old decorated surface of wall or even on newly plastered surfaces of wall or ceiling and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty 1 mm thick all as specified and directed by Engr-in-Charge. |
| 91 | M & L Preparation of new plastered surface wall and applying two coat of Exterior weather proof water base emulsion paint over a coat of white cement based putty complete all as specified and directed Make : Shalimar (Shaktiman)/ Asian (ACE) /Burger (Wall Menta) or equivalent in approved make by GE. |
| 92 | Ditto as in item No. 80.00above for external surfaces but on old surfaces all including Preparation of old surfaces Two coats of similar specifications Paint including white cement based Putty all as described above. |
| 93 | Supply andFix 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed By Engnr-in Charge. |
| 94 | M & L PCC (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed |
| 95 | Dismantling of Existing Water tank of 500/1000 Ltr Capacity all inclding removal to the store and Supply and fix Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) of capacity 500 Ltr, hoisted and fixed in position all as specified in SSR Part I |
| 96 | Excavating in trenches n exc 1.5m wide and not exc 1.5m in depth and getting out in any type of soil by using of mechincal plant or chisel cutting for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 SQM on plan complete all as specified and directed. |
| 97 | Demolition and breaking up drain pipes, soil , waste and pipes etc (RCC/ SWG/CI etc) PCC bed concrete of any description in trenches or floors, including connections and fittings all as specified and as directed of following bore size . |
| 98 | (b) 150mm |
| 99 | (C ) 200mm |
| 100 | Demolition of cement concrete in any floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes complete all as specified and directed. |
| 101 | Material & labour for concrete bed of PCC 1:4:8 type C2 using 40 mm graded stone aggregate for including packing under and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed. Note:-Thickness of bed below the barrel of pipes: 10cm for pipes 100 mm and 150mm dia &15cm for pipes 200mm dia and over. |
| 102 | (b) 150mm |
| 103 | (c) 200mm |
| 104 | S& F 200mm internal dia reinforced concrete pipes class NP-2 laid and jointed complete with collars complete all as specified and directed. |
| 105 | Material & labour PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching ,kerbs complete all as specified and directed. |
| 106 | Material & labour for PCC (1:4:8) type D-2 using 40 mm graded aggregate as in foundation filling & mass concrete complete all as specified and directed. |
| 107 | Material & labour for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping for manhole including slightly rounded or chamfered angles and including necessary foRM work finishing exposed surface complete all as specified and directed. |
| 108 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including foRMs, moulds,stopped ends complete all as specified and directed. |
| 109 | Demolition of Reinforced Cement Concrete of any description and in Cooking Platforms cupboards and other not otherwise specifically provided for complete all as specified and as directed by Engineer-inCharge |
| 110 | Material and Labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base of 15 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge |
| 111 | Ditto as in Item above but in Skirting with 10 mm thick CM 1:4 Complete all as specified and as directed by Engineer-inCharge |
| 112 | S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. |
| 113 | S&F in repir Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified including Health faucet fixing in pipe etc. complete all as specified and as directed. |
| 114 | S&F in repair of Toilet paper holder chromium plated recessed type fixing complete all as specified and directed by engr in charge. Make: Prayag or equivalent |
| 115 | Material and Labor in Repairs for Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including diameter of outelet 75 mm, complete all as specified and all as directed by Engnr-in-Charge |
| 116 | Material and Labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-inCharge |
| 117 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed by Engineer-in Charge |
| 118 | Supply and Fix Stainless Steel Kitchen Equipment /Furniture made using Grade SS 304 and Sheet thickness of minimum 1.2 mm, For Table Top & Burners Top For Kitchen Rack, For Legs, for Sink Etc with the size and description as follows :- 1. Single Bulk Range (24x24x20” ) (Qty 01 No)2. Two Burner Bulk Range (24x60x20”) (Qty 03 No)3. Working Table (24x48x32”) (Qty 01 No)4. Single Sink (18x24x32” +4 ) (Qty 01 No)5. Working Table (24x41x32” +4) (Qty 01 No)6. Chapati Range (24x48x32” +4 ) (Qty 02 No)7. Working Table (24x48x32”) (Qty 01 No)8. Roti Prep Table (24x66x32” +4) (Qty 01 No)9. Veg Pre Counter with Storage (24x72x32” ) (Qty 02 No)10. Vertical Four door (1000 Litre Capacity Volume) (Qty 01 No)11. Storage Rack (21x45x72”) (Qty 06 No)12. Three Sink unit (24x72x32”+4 ) (Qty 01 No) 13. Dish landing (24x48x32”+4) (Qty 01 No) 14. Crockery Rack 18x60x72” (Qty 01 No) |
| 119 | Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc) and making good disturbed surfaces of walls, floor etc complete all as directed by EIC. |
| 120 | Taking down old DBs including existing MCCBs and connected items of any make and type from the site and making good surface complete all as specified and directed by EIC. |
| 121 | Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed by EIC. |
| 122 | Taking down old unsv light fitting,Security light ,bulb of any size and make from the site and making good surface complete all as specified and directed by EIC. |
| 123 | M&L for point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and its also including various sizes of module plates in gray colour also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly complete all as speccified and as directed by EIC. |
| 124 | One light/Ceiling fan/Exhaust fan point controlled by one switch. |
| 125 | One 3 pin socket outlet on same board. |
| 126 | One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately. |
| 127 | -ditto- as above item No 112.03 but copper conductor 2.5 sqmm for 15 amp socket outlet. |
| 128 | One power point with insulated stranded copper conductor cable 4 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm stranded conductor as earth wire connected to dolly complete all as dircted by EIC. (socket and switches to be measured and paid separately) |
| 129 | S & F in repair of modular switch single pole one way 6 Amps, 1 module ISI marked complete all as specified and directed by EIC. |
| 130 | S & F in repair of modular socket single pole one way 6 Amp-2/3 pin, 2 module ISI marked complete all as specified and directed by EIC. |
| 131 | S & F in repair of modular switch single pole one way 16 Amps, 1 module ISI marked complete all as specified and directed by Engr-in-charge. |
| 132 | S & F in repair of modular socket single pole one way 16 Amp-2/3 PIN, 2 module ISI marked complete all as specified and directed by Engr-in-charge. |
| 133 | S & F in repair incl making existing surface good sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 20 Amp.(A/C Box) complete all as specified and directed by EIC. |
| 134 | Supplying, installing, testing & commissioning, storage water heater (geyser), 25 litres capacity, as per IS 2082 (five-star rated as per BEE), reheating time less than 60 minutes, mixing factor less than 20%, shock proof high density PUF insulation body material, glass lined inner tank material having warranty 7 years on tank material, 3 years on heating element and 2 years on other spares parts comprising following fittings and 2 year product warranty with temerature control knob (a) glass coated incoloy element (b) capillary type thermostat (c) Pressure saftey valve (d) thermal cutout (e) multifunction valve (f) earth leakage circuit breaker (g) magnesium anode rod cathodic protection (h) flexible cable of suitable length with 3-pin plug of 16 A capacity (i) drain plug (j) fusible plug fitted on the crown of water heater with max temprature 75 and 8 bar pressure including fixing by grouting and fastener complete all as specified and as directed by EIC. |
| 135 | Taking down any type of Ext fan, ceiling fan cable end, dismantling blades and removing fan and blades to E/M store |
| 136 | S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM with service value not less than 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all specified and directed by EIC. |
| 137 | S & F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all specified and directed by EIC. |
| 138 | S & F exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers complete all as specified and directred by EIC. |
| 139 | S & F in replacement LED batten luminaire surface/wall mounted ,4 feet 20 Watts comprise of aluminium extruded with anodised with powder coated in white colour with decorative end cap. The luminare is pre-wired with high efficiency electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-40 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed by EIC. |
| 140 | S & F in replacement LED batten luminaire surface/wall mounted, 2 feet 10 Watts comprise of aluminium extruded with anodised thermally conductive material with powder coated in white colour with decorative end cap. The luminare is pre wired with high efficacy electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed by EIC. |
| 141 | S&F in repair of LED Building security light fitting 30 W new generation energy saving and environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover in the front and lens for batwing likght distribution or having TOP opening seprate driver compartment with IP 66 protection and impact resistance of IK07 for mounting existing bracket complete including all accessories pre-wired with 3 X 1.5 sqmm single core mutistrand copper conductor cable up to celing rose/ terminal box and proper earthing connection must be provided, all as specified and directed by Engr-in-Charge. |
| 142 | S & F in replacement Surface mounting as suitable in existing fitting ultra slim 36 W LED 2x2 edge-lit tile in Aluminium Extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as specified and directed by EIC. |
| 143 | S & F in repair Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body complete all as specified and directed by EIC |
| 144 | Supplying laying in trenches and fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing LT Cross Linked Polythene Insulated(XLPE insulated) galvanized steel strip armored electric cable 1100 volt grade heavy duty ISI marked with aluminium conductor and overall served with an outer sheath of PVC, of cross sectional area including cable glands made out of finned brass double compression type of size 16 Sqmm 4 Core. Note :- Excavation/road cutting, earthwork, Sand Cushioning, Cable covers, Pipe for cable protection to be measured and paid for separately. |
| 145 | Excavation or road cutting in trenches not exc 1.5m wide and not exc 1.5M depth for laying of cable, getting out including forming bottom surface to required level and gradient in hard/dense soil.complete all as specified and directed. |
| 146 | M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil. complete all as specified and directed. |
| 147 | Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed. |
| 148 | M & L for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.Note : Punned thickness only shall be measured and paid. |
| 149 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with peak, size 250mm x 150mm x 40mm complete all as specified and directed by EIC. |
| 150 | M & L for sub main wiring with three run of 10 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 10 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in surface/ recessed steel/ PVC conduit of required size complete all as directed by EIC. |
| 151 | M & L for sub main wiring with two run of 6 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 6 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge. |
| 152 | M & L for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in surface/ recessed steel/ PVC conduit of required size complete all as directed by EIC. |
| 153 | S & F SS hood with baffle filter & LED light and panel indicatorof 5 ft, the 202 1 mm thickness is used for SS hood and GI sheet no 60 is used for ducting complete all as directed by EIC. |
| 154 | S & F SS hood with baffle filter & LED light and panel indicatorof 4 ft, the 202 1 mm thickness is used for SS hood and GI sheet no 60 is used for ducting complete all as directed by EIC. |
| 155 | supply installtion and testing of Ducting of GI Sheet of 60 no is used for ducting material complete all as directed by EIC. |
| 156 | Supply, installtion and testing of 5 hp Blower machine for removing the hot fume of kitchen having 415 volt , pf .8, frequency 50 Hz, air flow rate 200 -600 CFM suitable for ventilation system, cooling process, dust collection etc incl all connected items complete all as specified and directed by eic. |
| 157 | S&F sheet metal enclosure for VTPN MCCB DB 4 way, with 200 A rated bus bar, double door with 100 Amp, 25 KA, 4P MCCB (Ics=100% Icu) as incomer (Vertical type double door,100 Amps MCCB rate inclusive) 200 Amp rated bus-bar and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole MCCB* as incomer and SP/TP MCB's as outgoingscomplete all as specified and directed. |
| 158 | S&F in repair of SPN DB 8 way with 200 Amp rated bus bar, IP 43, ISI marked acrylic double door complete all as directed by EIC. Note: - Contractor must provides IP43 certificate. |
| 159 | S&F in repair of SPN DB 12 way with 200 Amp rated bus bar, IP 43, ISI marked acrylic double door complete all as directed by EIC. Note: - Contractor must provides IP43 certificate. |
| 160 | S & F in repair MCB SPN 32-40 A 240 V 10 KA 'B' curve and connection with suitable thimbles testing and commissioing complete all as specified and directed by EIC |
| 161 | S & F in repair of MCB single pole 6 to 32 Amps 240 V with thimble suitable for wires complete all as directed by EIC. |
| 162 | Earthing complete with galvanised iron earth plate electrode 60cmx60cmx6mm thick , burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised steel wire 4 mm dia by means of galvanised nuts, bolts, check nuts and washers including excavation and earth work, with precast PCC 1:3:6 type C-2 pit, PCC pit cover 1:2:4 type B-1 with handle, GI protection pipe 15 mm bore light grade and 20mm medium grade GI watering pipe, Funnel , wire mesh etc complete as shown in electrical Plate No.3 of SSR Part-I connected to earthing test point and metal part all as specified including testing on completion complete all as directed by EIC. Please Enable Macros to View BoQ information |
