|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm DSR 15.23.1 |
| 2 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR 13.88 |
| 3 | Providing and laying in position cement concrete in Foundation 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mmnominal size) |
| 4 | 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand)13.1.2 |
| 5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 6 | Distempering with 1st quality acrylic distemper (ready mix) having VOC content less than 50 gram/litre, of approvved manufactiurer and of required shade and colour all complete to achieve even shade and colour 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement prime |
| 7 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR 11.41.2 |
| 8 | Supply and installing of low density polyethylene seamless one peace moulded tank and placing the same in proper position including all taxes labour and T&P etc for proper completion of the work. Tank should be ISI marked (for 500 Liters) DSR 18.48 |
| 9 | 17.3 providing and fixing white viterious china pedestal type water closet(Eropeantype)w.c pan with ISI marked white solid plastic seat and lid 17.3.1 |
| 10 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR 17.31 |
| 11 | 17.7A Wash hand basin 550x400 mm size of white glazed earthen ware |
| 12 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms DSR 17.71, |
| 13 | C.P. Brass towel rail 600 MM LONG mm together with pair of C.P. brass brackets to fit the towel rail. DSR 17.73.2 |
| 14 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15MM Nominal Bore DSR 18.49.1, |
| 15 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore DSR 18.51.1, |
| 16 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore. DSR 18.53.1, |
| 17 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 MM DIA DSR 18.22.1 |
| 18 | providing and fixing gun metal gate valve with C.I wheel of approved quality 20mm dia DSR 18.17.1A |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia .Pipes. DSR 18.8.2 |
| 20 | providing and fixing gun metal gate valve with C.I wheel of approved quality 40mm dia DSR 18.17.3 |
| 21 | Providing and fixing brass stop cock of approved quality : 20 mm Nominal bore DSR 18.16.2 |
| 22 | Providing and fixing brass stop cock of approved quality : 15MM Nominal bore DSR 18.16.1 |
| 23 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter. DSR 12.41.2 |
| 24 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece 10.5.2 Please Enable Macros to View BoQ information |
