|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Dismantling old plaster or skirting, raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping groundwithin 50 meters lead |
| 3 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 5 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | Providing and fixing stainless steel kitchen sink of size 450mm x 450mm with C.I brackets and stainless steel plug 40 mm including painting complete job |
| 7 | Providing and fixing kitchen sink mixer of approved make including all accessories complete |
| 8 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. Thisincludes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 25mm OD(SDR-7.4) |
| 9 | Providing and fixing stainless steel heavy duty 15 mm nominal bore angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 10 | Providing and fixing of 25 Litre Geyser of approved brand with all fittings and fixtures complete job |
| 11 | Providing/Fixing of exhaust fan of approved brand including wiring complete job |
| 12 | Engagement of carpenters for repairs of damaged doors and windows and fixing of ceiling etc and as directed by EIC |
| 13 | Providing and fixing water closet squatting pan (Indian type W.C. pan)with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C.flushing cistern, including flush pipe (of approved make) with manuallycontrolled device (handle lever) conforming to IS: 7231, with all fittingsand fixtures complete, including cutting and making good the walls andfloors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 14 | Providing and fixing stainless steel heavy duty Long nose bib cock of 15 mm nominal bore of approved make. |
| 15 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 16 | Providing and fixing white vitreous china pedestal for wash basincompletely recessed at the back for the reception of pipes and fittings. |
| 17 | Proividing and fixing of walll mixer of approved make including all accessories complete |
| 18 | Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixedto wooden cleats with C.P. brass screws and washers complete. |
| 19 | Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms |
| 20 | Providing and fixing of CP Soap case of approved make including all accessories complete |
| 21 | Providing and fixing of PVC fittings of approved brand |
| 22 | 100 mm dia pipe |
| 23 | 75 mm dia pipe |
| 24 | Bend 100 mm dia |
| 25 | Bend 75 mm dia |
| 26 | Floor Trap 75 mm |
| 27 | Ball valve |
| 28 | Gate valve |
| 29 | Tanky nipple |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank Please Enable Macros to View BoQ information |
