|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: all kinds of soils |
| 2 | Providing & Laying of stone soling (dully hand packed) including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 3 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 4 | P/L in position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size |
| 5 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:2:4 coarse sand 20mm nominal size crushed stone agg.) |
| 6 | Reinforced cement conc. Work in beams, suspended floors roofs having slope upto 15 deg. Landing balconies, shelves, lintels upto floor 5 level excld. Centring, shuttering in 1:1.5:3 20mm stone agg. Nominal size |
| 7 | RCC work in walls, incld. attchd pilasters, buttresses plinth & string courses, columns, pilars, abts, posts and sturts etc upto floor 5 level excld. Cost of cntring, shuttering, finishing and reinforcement 1:1.5:3 graded crshd stne agg. 20mm nominal size. |
| 8 | Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (TMT bars of grade Fe-500D or more.) |
| 9 | Brick work with FPS bricks of class designation 75 in foundtion & plinth in cement mortar 1:6 (1 cement, 6 coarse sand) |
| 10 | Extra for brick work in super structure above plinth level upto floor V Level(by manual means) |
| 11 | Providing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position Imported wood |
| 12 | Providing & fixing panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISI marked black enamelled M.S Butt hingeswith necessary screws excluding panelling Imported wood 30mm thick |
| 13 | Providing and fixing decorative plywood B/S decorative veneer (Type 1) conforming to IS1328BWR type |
| 14 | Providing & fixing 3.5 mm Thick Glass panes i/c necessary beading and nails complete as directed. |
| 15 | 12mm Cement Plaster of mix 1:6(1 cement:6 coarse sand) |
| 16 | 6 mm cement plaster to ceiling of mix 1:3(1 cement: 3 fine sand) |
| 17 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 18 | Distempring with 1st quality acrylic washable distemper (ready made) of approvedd manufacture & of required shade/ colour compleate as per manufacture's specifications Two or more coats on New Work |
| 19 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 20 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work(hard and soft wood) |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 22 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, with all leads and lifts complete |
| 23 | Providing & fixing of 40x5mm flat iron hold fast 40cm long including fixing to frameswith 10mm dia bolts nuts & wooden plugs and embedding in cement concrete block 30x10x5cm 1:3:6mix (1cement:3coarse sand:6 graded st agg)20mm nominal size. |
| 24 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm |
| 25 | Centring and shuttering incld. Strutting, proping etc & removal of form work for Founadtions, footings, bases of columns for mass concrete. |
| 26 | Centring and shuttering incld. Strutting, proping etc & removal of form work for suspended floors, roofs, landings, balconies & access plateform |
| 27 | Centring and shuttering incld. Strutting, proping etc & removal of form work for Lintel, Beams etc |
| 28 | Centring and shuttering incld. Strutting, proping etc & removal of form work for colums, pillars, piers, abts, posts and strats |
| 29 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. i/c soffits / eaves board Welded |
| 30 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 31 | Providing ridges of hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks bolts & nuts 8mm dia GI limpet & bitumen washers complete 0.50mm thick with zinc coating not less than 275g/sqm |
| 32 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm |
| 33 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm |
| 34 | Providing and Fixing of L Drop of Standard make i/c Locking system complete |
| 35 | Provding & fixing 04 layer 18 gauge (304)plain stainless steel railing of approved make Like Jindal i/c master pillar and boster on alternate steps or equlant i/c welding, polishing as per directions of engineer incharge complete |
| 36 | Supplying and fixing of medium class PVC Conduit/duct of approved make with accessories incl. cutting the wall and make good the same with cement plaster,wall putty,point, complete,25mm |
| 37 | Providing and fixing deep junction for light points of approved make |
| 38 | Providing and fixing Fan Box of approved make |
| 39 | Carriage of materails By Mech.Transport, from source to site of work |
| 40 | Stone Agg. For an Average lead of10 Km |
| 41 | Sand . For an Average lead of 5 Km |
| 42 | Bricks For an Average lead of10 Km Please Enable Macros to View BoQ information |
