|
| 1 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade, ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches , modular socket outlets,modular fan regulators etc. for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed by Engineer-in-Charge. Note :- a) All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid for separately . |
| 3 | Description all as per serial item No.02 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch on independent board, complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Description all as per serial item No.02 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch on same board, complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Description all as per serial item No.02 here-in-before but for one socket outlet 16 Amp with 2.50 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade, ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly, complete all as specified and as directed by the Engineer-in-Charge.Note : (i) Point wiring shall be done in a manner that not more than 02 socket point executed in one circuit.(ii) Each socket point will be measured and paid as per point. |
| 6 | Description all as per srl item No 02 here-in-before but for one socket outlet 16 Amp with 4.00 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 4.00 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly, complete all as specified and as directed by the Engineer-in-Charge.Note : (i) Point wiring shall be done in a manner that not more than 01 socket point executed in one circuit.(ii) Each socket point will be measured and paid as per point. |
| 7 | Supply and fixing of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts, complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Supply and fixing of modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts, complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Supply and fixing of modular bell push 6 Amp, 1 way, 1 module, 230 volts, complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | Supply and fixing of modular socket outlet multipin combined, 6 Amp, one way, two module, 230 volts, complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Supply and fixing of modular socket outlet multipin combined, (6pin), 6/16 Amp, one way, two module, 230 volts, complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Supply and fixing as in repair electronic Fan regulator, modular 100 watts, 1 module, 230 volts, 50 Hz, AC supply suitable for ceiling fan any type/make/sweep, complete, all as specified and as directed by the Engineer-in-Charge. |
| 13 | Supply and fixing in repair calling bell, ding dong, 230 volt, complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | Supply and fixing ceiling rose surface type 2/3 terminal polycarbonate, isolated body, complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Supply and fixing in replacement LED lamp 9 watt threaded/pin end, warm/cool lamp type as per site requirement suitable for fixing on existing batten/angular holders, complete all as specified and as directed by the Engineer-in-Charge. Cat part No. BL029WB22 of Make Benlo or equivalent make given in Appx 'B'. |
| 17 | Supply and fixing in replacement LED lamp 12 watt threaded/pin end, warm/cool lamp type as per site requirement suitable for fixing on existing batten/angular holders, complete all as specified and as directed by the Engineer-in-Charge. Cat part No. BL0212WB22 of Make Benlo or equivalent make given in Appx 'B'. |
| 18 | Supply and fixing in repair LED batten fitting 10 watt, 2 feet, polycarbonate housing with electronic driver cool/warm type, connecting with copper conductor flexible cable from ceiling rose to connector of the light, complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LBLN-10-C-SQ of make Orient or equivalent make given in Appx 'B'. |
| 19 | Supply and fixing in repair LED batten fitting 20 watt, 4 feet, polycarbonate housing with electronic driver cool/warm type, connecting with copper conductor flexible cable from ceiling rose to connector of the light, complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LBLN-20-C-SQ of make Orient or equivalent make given in Appx 'B'. |
| 20 | Supply and fixing in repair, LED surface mounted bulk head luminaries 8-10 watt with min 800 lumen, IP 65, aluminium housing, surge protection including driver and LED lamp, etc. complete with all accessories, connecting with copper conductor flexible cable from ceiling rose to connector of the light, complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LIBH-10-C-P of make Orient or equivalent make given in Appx 'B'. |
| 21 | Supply and fixing in repair, 9/12 watt thermoplastic wall mounting fixture (sketch type) with B-22 LED lamp and including connecting with copper conductor flexible cable from ceiling rose to connector of the light complete and removing unserviceable light fittings, complete all as specified and as directed by the Engineer-in-Charge. Cat part No.DECO WALL LIGHT FROSTED of make Orient or LHFOGBE1TZ1W035 of make Havells or equivalent make given in Appx 'B'. |
| 22 | Supply and fixing Surface/Recess mounting LED 15/18 watt cool/warm type circular down lighter/ COB panel with PVC housing, 240 volt, 50HZ, AC supply complete with all accessories internally pre wired including connecting with 3 core flexible copper conductor from ceiling rose to connector of the light, including disconnecting and taking down existing old unserviceable fitting, complete all as specified and as directed by the Engineer-in-Charge. Cat part No.LDRDZ-15-C of make Orient or equivalent make given in Appx 'B'. |
| 23 | Supply and fixing Surface/Recess mounting LED 5/8 watt cool/warm type circular down lighter/ COB panel with PVC housing, 240 volt, 50HZ, AC supply complete with all accessories internally pre wired including connecting with 3 core flexible copper conductor from ceiling rose to connector of the light, including disconnecting and taking down existing old unserviceable fitting, complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LDRDZ-05-C of make Orient or equivalent make given in Appx 'B'. |
| 24 | Supply and fixing in repair, LED Bldg Security Light Fittings of capacity 40-45 watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including electronic driver and making electrical connection, complete all as specified and as directed by the Engineer-in-Charge. Cat part No.LSFS-45-CF-PC of make Orient or HLSLD-14-40-CWDL-R01 of make Halonix or equivalent make given in Appx 'B'. |
| 25 | Supply and fixing inverter LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with 3 to 4 hours battery back up, auto on off all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position, complete all as specified and directed. Cat part NoLED SL 30W HLSLD-ML04-30-CWL-INV-RTC-R of make Halonix or equivalent in make given in Appx 'B'. |
| 26 | Supply and fixing in repair, service bracket of mild steel pipe 25 mm bore medium grade of length 0.70 mtr fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts and washer and suitable reducer for connecting fitting to GI pipe as required at site including two coats of synthetic enamel paint over one coat of red oxide primer on mild steel work, complete all as specified and as directed by the Engineer-in-Charge. |
| 27 | Supply and fixing LED flat panel 2' x 2' size fully difused surface/ recess mounted fitting (grid/ gypsum type) 36-40 watt , 5700K, warm/cool white with powder coating and CRCA front cover including frame with provision of PVC flexible copper conductor cable from ceiling rose to light fitting as in repair, complete all as specified and as directed by the Engineer-in-Charge. Cat part No.LTRAQ-36-C-FC of make Orient or equivalent in make given in Appx 'B'. |
| 28 | Supply and fixing recess mounted direct-indirect circular LED luminaire 2'X2', 34 watt (26+8 watt) warm /cool day light with uniform light distribution, white colour powder coated deep drawn housing unique floating spherical high effeciency translucent PMMA diffuser for direct lighting with high effeciency LEDs, constant current, costant voltage driver with effeciency of min 85% suitable for grid / POP ceiling, complete all as specified and as directed by Engineer-in-Charge. Make : Wipro cat part No : LM38-461-XXX-57-XX or equivalent in make given in Appx 'B'. |
| 29 | Supply & fixing LED Flood lights, 50 watt, IP-66, aluminum die cast housing with unique lens system and toughened glass with gasket 240 volt, 50Hz, AC supply complete with all accessories internally pre wired including connecting with flexible copper conductor to connector of the light with necessary fixing arrangements, including disconnecting and taking down existing old unserviceable fitting, complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LFSM-050-C-V3 of make Orient or equivalent in make given in Appx 'B'. |
| 30 | Supply & fixing LED Flood lights, 100 watt, IP-66, aluminum die cast housing with unique lens system and toughened glass with gasket 240 volt, 50Hz, AC supply complete with all accessories internally pre wired including connecting with flexible copper conductor to connector of the light with necessary fixing arrangements, including disconnecting and taking down existing old unserviceable fitting, complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LFSM-100-C-V3 of make Orient or equivalent in make given in Appx 'B'. |
| 31 | Supply and fixing LED Bollard 8-10 watt, IP-65 , 6500 K luminaire made of pressure die cast aluminium housing and clear glass , 240 volt, 50HZ, AC supply , complete with all accessories including electronic driver, internally pre wired including connecting with three core flexible copper conductor cable from Electric Supply Source to connector of the light as in repair, complete all as specified and as directed by the Engineer-in-Charge Cat No. HLOB-02-10-CW of make .Halonix or equivalent in make given in Appx 'B'. |
| 32 | Suply and fixing flexible IP -65 LED strips light in cool / warm white not less than 8 watt per meter along with drivers of suitable size for converting AC into DC, 230 vots, including connecting up with two core 1.5 sqmm flexible copper conductor cable, complete all as specified and directed by Engineer-in-Charge. Cat part No. LSTRIP-45-C-120 of make Orient or equivalent make given in Appx 'B'. |
| 33 | Suply and fixing aluminium channel of size 25X12 mm along with diffuser cover concealed / surface type including necessary arrangement for fixing in wall / ceiling, suitable for fixing flexible LED strips light, complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply and fixing LED Decorative,wall mounting picture light 10-12 Watt, metal body with Opal Glass diffuser including connecting up with driver two core flexible copper conductor, complete all as specified and directed by Engineer-in-Charge. Cat Part No. Metal 12 W Muziris Picture light of Make Philips or equivalent in make given in Appx 'B'. |
| 35 | Supply and fixing LED post top luminaire 20W- 25W, 5700K, IP-65 made of pressure die-cast aluminium housing & clear glass 240 volt, 50HZ, AC supply complete with all accessories, including electronic driver, internally pre wired including provision of 3 core PVC flexible copper conductor from electric supply source to connector of the light, including disconnecting and taking down existing light fitting and removing old unserviceable fitting, complete all as specified and as directed by the Engineer-in-Charge. Cat Part No. HLPT-S04-20-CW of Make Halonix or equivalent in make given in Appx 'B'. |
| 36 | Supply and fixing LED post top luminaire 40W- 45W, 5700K, IP-65 made of pressure die-cast aluminium housing & clear glass 240 volt, 50HZ, AC supply complete with all accessories, including electronic driver, internally pre wired including provision of 3 core PVC flexible copper conductor from electric supply source to connector of the light, including disconnecting and taking down existing light fitting and removing old unserviceable fitting, complete all as specified and as directed by the Engineer-in-Charge. Cat Part No. HLPT-04-45CW of Make Halonix or equivalent in make given in Appx 'B'. |
| 37 | Supply and fixing LED high bay/medium bay luminaire 80-90 watt, IP-65,indoor type input voltage range 120-270 volts including electronic driver, provision of 3 core copper conductor cable 1.5 Sqmm size from connector/ceiling rose to fitting with fixing arrangement as per site requirement/conditions and including removing old unserviceable fitting, complete all as specified and as directed by the Engineer-in-Charge. Cat Part No. HLBL-ML-11-80-CWL of Make Halonix or equivalent in make given in Appx 'B'. |
| 38 | Supply and fixing LED 22 watt integrated batten fitting with inbuilt lithium ion battery with minimum 4 hour back up including removing of unservicable light fitting, complete all as specified and as directed by the Engineer-in-Charge. Cat part No.LED INVERTER BATTENHLB-08-22-CW-INV of make Halonix or equivalent in make given in Appx 'B'. |
| 39 | Supply and fixing LED lamp Invertor technology 9 watt with 4 hour power back up with efficiency more than 100 lumen per watt,Lithium ion battery, complete all as specified and as directed by the Engineer-in-Charge. Cat part No.LED INVERTER LIGHT 10 W B22 CW IP of make Halonix or equivalent in make given in Appx 'B'. |
| 40 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB.20 Amp, 10 KA 'B' curve including removing old unserviceable enclosure, complete all as specified and as directed by the Engineer-in-Charge. Cat part No. 811955 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 41 | Supply and fixing as in repair PCB unit suitable for BLDC ceiling fan of 1200mm sweep single phase, 240 volts of make crompton, Halonix, Havells etc., complete all as specified and as directed by the Engineer-in-Charge. |
| 42 | Supply and fixing as in repair modular PVC sheet/cover plate with Plastic surface box 3 way suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed by the Engineer-in-charge. Cat part No.800063 & 800183 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 43 | All as per above item No. 42 but new 4 module cover plate with Plastic surface box , complete all as specified and as directed by the Engineer-in-charge. Cat part No.800064 &800184 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 44 | All as per above item No. 42 but new 6 module cover plate with Plastic surface box, complete all as specified and as directed by the Engineer-in-charge. Cat part No.800066 & 800186 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 45 | All as per above item No. 42 but new 8 module cover plate with Plastic surface box, complete all as specified and as directed by the Engineer-in-charge. Cat part No.800067/800068 & 800187/800188 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 46 | All as per above item No. 42 but new 12 module cover plate with Plastic surface box, complete all as specified and as directed by the Engineer-in-charge. Cat part No.800065 & 800185 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 47 | Supply and fixing GI 'D' clamp heavy duty superior quality and nut and bolts with locking arrangement for hanging ceiling fan, complete all as specified and as directed by the Engineer-in-charge. |
| 48 | Supply and fixing GI fan rod 600mm long heavy duty with superior quality and nut and bolts with locking arrangement , complete all as specified and as directed by the Engineer-in-charge. |
| 49 | Supply and fixing heating element cup or triangle type of 2 KW as required at site for geyser of any make and any descriptions including taking out old unserviceable heating elements , complete all as specified and as directed by the Engineer-in-charge. |
| 50 | Supply and fixing thermostat copper switch for geyser of any type ISI marked including taking out old unserviceable thermostat switch, complete all as specified and as directed by the Engineer-in-charge. |
| 51 | Supply and fixing geyser inner tank assembly made of steel suitable for geyser capacity of 25 Ltr including taking out old unserviceable tank assembly , complete all as specified and as directed by the Engineer-in-charge. |
| 52 | Supply and fixing in repair, heating element, 2 KW, having inbuilt thermostat as required at site for geyser of any make and descriptions , complete, all as specified and as directed by the Engineer-in-Charge. |
| 53 | Supply and fixing brass chromium plated non return valve 15mm bore with air lock release arrangement including taking out old unserviceable non return valve, , complete all as specified and as directed by the Engineer-in-charge. |
| 54 | Supply and replacing metal clad socket & top as per existing socket and top including taking out old unserviceable metal clad socket top, complete all as specified and as directed by the Engineer-in-charge. Cat part No 811955 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 55 | Supply and fixing in replacement flexible cable PVC insulated and sheathed, 3 core, circular multi stranded copper conductor of 1.50 Sqmm including removing unserviceable cable, complete all as specified and as directed by the Engineer-in-charge. |
| 56 | Supply and fixing brass connection pipe 600 mm long having wire mesh coating over it with brass nuts and washers suitable for connecting geysers inlet and outlet with GI tubings including taking out old unserviceable connections of any description all as specified and as directed by Engineer-in-charge. |
| 57 | Supply and fixing top plug 15 Amp, 3 pin including taking out old unserviceable plug top , complete all as specified and as directed by the Engineer-in-charge. |
| 58 | Supply and fixing top plug 5 Amp, 3 pin including taking out old unserviceable plug top , complete all as specified and as directed by the Engineer-in-charge. |
| 59 | Supply only flexible cable PVC flat insulated and sheathed, 2 core, multi stranded copper conductor of 23/0.76 Sqmm including removing unserviceable cable, complete all as specified and as directed by the Engineer-in-charge. |
| 60 | Supply and fixing MCB SP, 6-32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB , complete all as specified and as directed by the Engineer-in-Charge. Cat Part No 811008 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 61 | Supply and fixing MCB SPN 32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB , complete all as specified and as directed by the Engineer-in-Charge. Cat Part No 811034 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 62 | Supply and fixing MCB SPN, 63 Amps, 240 volt,10 KA , 'C' curve as per site requirement including removing old unserviceable MCB , complete all as specified and as directed by the Engineer-in-Charge. Cat Part No 811154 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 63 | Supply and fixing in repair MCB three pole and neutral 415 Volts, 63-100 Amps, 16 KA, 50 Hz thermal adjustable type , complete all as specified and directed by the Eng-in-charge. Cat Part No 811220 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 64 | Supply and fixing MCB SP, 40-63 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB , complete all as specified and as directed by the Engineer-in-Charge. Cat Part No 811018 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 65 | Material and labour for opening the stator & rotor of the 1200mm sweep ceiling fan, cutting the existing worn winding and rewinding the fan with superior quality copper wire and filling the varnish as insulation between each winds & covering each loops of winding by sleeves and paper & reassembling of , complete fan by fixing serviceable old and new parts of fans i.e. rubber bush, condenser and shackle housing , gun metal bushes, ball bearings, twin twisted copper cable, down rod assembly & canopy ,split pins , complete all as per manufacturers design air delivery including greasing, oiling & testing of fans all as per manufacturers design & speed , complete all as directed & approved for 1200mm sweep.Notes for item NO (i) to (vii) :- (i). The quoted unit rate shall be deemed to be inclusive of taking out defective parts and fixing of new parts. All new parts shall be measured and paid wide relevant items of the schedule. (ii). The rates for refixing and taking out serviceable parts shall be deemed to be included of quoted unit rates.(iii). New parts shall be of respective makes of fans.(iv). The quoted unit rates shall also include writing of MES No on fans(v). Unserviceable /defective retrieved parts shall be credited under sch of credit.(vi). After assembling all fans shall be tested for the speed as directed.(vii). All the fans shall be repaired/rewind at AGE E/M store yard only. |
| 66 | Description all as per serial item No 65 here-in-before but for Exhaust fans of 250/300mm sweep, complete all as specified and as directed by the Engineer-in-Charge. |
| 67 | Description all as per serial item No 65 here-in-before but for Exhaust fans of 450 sweep, complete all as specified and as directed by the Engineer-in-Charge. |
| 68 | Supply and fixing as in repair heavy duty wall mounting fan 400 mm sweep with corrosion resistant PVC body, minimum noise, operation and maintenance free design, totally enclosed, highly efficient, heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings, aerodynamically contoured blades, rigid frame, PVC blades and testing , complete all as specified and as directed by Engineer-in-Charge. SKU Code 250552 of make Bajaj or equivalent in make given in Appx 'B'. |
| 69 | Supply and fixing as in repair heavy duty exhaust fan 450 mm sweep with corrosion resistant metallic body, minimum noise, operation and maintenance free design, totally enclosed, highly efficient, heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings, aerodynamically contoured blades, metallic base frame with rubber mountings for silent operation, 6 pole, maximum watt input not more than 90 watt, 1400 RPM, minimum air delivery 1710 cum/hr with metal blades and shutter type louvers self-openable/ closeble for protecting the entrance of birds as per IS :2132-1967 and testing , complete all as specified and as directed by Engineer-in-Charge. SKU Code 70064 of make Bajaj or equivalent in make given in Appx 'B'. |
| 70 | Supply and fixing of heavy duty exhaust fan 300mm sweep with corrosion resistant metal body, minimum noise, operation and maintenance free design, totally enclosed, highly efficient, heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings, aerodynamically contoured blades, PVC base frame with rubber mountings for silent operation, maximum watt input not more than 50 watt, 1400 RPM, minimum air delivery 750 cum/hr,metal blades testing as in repair , complete all as specified and as directed by Engineer-in-Charge. SKU code - 70003 of make Bajaj or equivalent in make given in Appx 'B'. |
| 71 | Supply and fixing ball bearing No 6201 for 1200/1400mm sweep ceiling fans , complete all as specified and as directed by the Engineer-in-charge. |
| 72 | Supply and fixing ball bearing for 250 to 450 mm sweep Exhaust fans, complete all as specified and as directed by the Engineer-in-charge. |
| 73 | Supply and fixing rubber clamp of suitable size for hanging of 1200-1400 mm ceiling fans in 40/50 mm GI pipe, as in repair , complete all as specified and as directed by the Engineer-in-charge. |
| 74 | Supply and fixing gun metal bush suitable for 1200/1400mm sweep ceiling fan ,complete all as specified and as directed by the Engineer-in-charge. |
| 75 | Supply and fixing in repair fan capacitor 2.5 MFD suitable for 1200/1400 mm ceiling fan\, complete all as specified and as directed by the Engineer-in-charge. |
| 76 | Supply and fixing sheet metal enclosure Vertical triple pole & neutral(VTPN) IP-43 including MCCB 100 Amp, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface including removing old unserviceable enclosure , complete all as specified and as directed by the Engineer-in-charge. Cat part No.811888 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 77 | Supply and fixing sheet metal enclosure triple pole & neutral(TPN) 4 way IP-43 with MCB TPN 63 Amp, 16 KA, 415 volts, flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface including removing old unserviceable enclosure , complete all as specified and as directed by the Engineer-in-charge. Cat part No.811840 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 78 | Supply and fixing sheet metal MCB DB SPN 4 way with 200 Amps rated bus bar single pole and neutral with double door IP-43 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure , complete all as specified and as directed by the Engineer-in-charge. Cat part No.811805 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 79 | Supply and fixing sheet metal MCB DB SPN 8 way with 200 Amps rated bus bar single pole and neutral with double door IP-43 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure , complete all as specified and as directed by the Engineer-in-charge. Cat part No.811807 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 80 | Supply and fixing sheet metal MCB DB SPN 12 way with 200 Amps rated bus bar single pole and neutral with double door IP-43 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure , complete all as specified and as directed by the Engineer-in-charge. Cat part No.811808 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 81 | Supply and fixing as in repair, MCCB, 4 pole, 100 Amp, 415 Volts, 16 KA , fixed type including fixing arrangement, complete all as specified and as directed by the Engineer-in-Charge. Cat part No.830022 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 82 | Supply and laying as in repair sub main wiring with two run of 4 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires, complete all as specified and as directed by the Engineer-in-Charge.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 83 | Supply and laying as in repair sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires, complete all as specified and as directed by the Engineer-in-Charge.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 84 | Supply and laying as in repair sub main wiring with four run of 10 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 10 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires, complete all as specified and as directed by the Engineer-in-Charge.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Four runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 85 | Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty 2 core, 6 sq mm nominal cross section cable with PVC insulated aluminium conductor multistranded served with an inner sheathing of PVC tape and overall PVC sheathed in service connection, including disconnecting and taking down old U/S existing cable, complete all as specified and as directed by the Engineer-in-Charge. |
| 86 | Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty 2 core, 10 sq mm nominal cross section cable with PVC insulated aluminium conductor multistranded served with an inner sheathing of PVC tape and overall PVC sheathed in service connection, including disconnecting and taking down old U/S existing cable, complete all as specified and as directed by the Engineer-in-Charge. |
| 87 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth strip 25 x 3mm thick by means of bolts, nuts, check nuts and washers of galvanised iron.Earth strip protected by GI pipe 32mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing as in repair, complete all as directed by Engineer-in-Charge and earth testing on completion . |
| 88 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing as in repair, complete all as directed by Engineer-in-Charge and earth testing on completion . |
| 89 | Supply and fixing GI/MS rectangular block for mounting, switches, sockets, fan regulators etc. with 3 mm thick plastic laminated sheet cover of size upto 300 x 250mm, complete all as specified and as directed by Engineer-in-charge. |
| 90 | Supply and fixing Switch Paino flush type single pole 6 Amps, complete all as specified and directed by Engineer-in-charge. |
| 91 | Supply and fixing Switch Paino flush type single pole 16 Amps complete all as specified and directed by Engineer-in-charge. |
| 92 | Supply and fixing Socket outlet 2 in 1, 3 pin 6 Amps, complete all as specified and directed by Engineer-in-charge. |
| 93 | Supply and fixing Socket outlet 6/16Amps 6 Pin, complete all as specified and directed by Engineer-in-charge. |
| 94 | Supply and fixing stepped type electronic fan regulator flush type on the existing laminated sheet etc., complete all as specified and directed by Engineer-in-charge. |
| 95 | Supply and fixing as in repair, MCCB, 4 pole, 125 Amp, 415 Volts, 16 KA , fixed type including fixing arrangement, complete all as specified and as directed by the Engineer-in-Charge. Cat part No.830023 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 96 | Supply and laying as in repair sub main wiring with two run of 2.5 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 2.5 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires, complete all as specified and as directed by the Engineer-in-Charge.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 97 | Supply and laying as in repair sub main wiring with two run of 1.5 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 1.5 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires, complete all as specified and as directed by the Engineer-in-Charge.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 98 | Supply and fixing as in repair, PVC White Freshner Exhaust Fan 250mm sweep, 1400 RPM, Aerodynamically designed blanced blades, Rust proof body, Low power consumption, 5 blades complete with Louvers easy to mount, complete all as specified and as directed by Engineer-in-charge. SKU Code 70049 of make Bajaj or equivalent in make given in Appx 'B'. |
| 99 | Supply and fixing as in repair, PVC White Freshner Exhaust Fan 300mm sweep, 1400 RPM, Aerodynamically designed blanced blades, Rust proof body, Low power consumption, 5 blades complete with Louvers easy to mount, complete all as specified and as directed by Engineer-in-charge. SKU Code 70062 of make Bajaj or equivalent in make given in Appx 'B'. |
| 100 | Material and labour for 4 sqmm 3 core PVC indulated and PVC round sheathed, copper conductor 1100 volts grade, complete all as specified and directed by Engr-in-charge. |
| 101 | Material and labour for 2.5 sqmm 3 core PVC indulated and PVC round sheathed, copper conductor 1100 volts grade, complete all as specified and directed by Engr-in-charge. |
| 102 | Supply and fixing in repair, electronic meters temperproof LCD display with polycarbonate cover 230 V, 10-60 Amps, accuracy class-I 50 Hz, conforming to IS 13779, IP-54 with parameters to show data, time, current reading, load, PF, voltage and kWH, complete all as specified and as directed by Engineer-in-charge. |
| 103 | Note:- Amount of credit of Rs.1,83,611.00 for retrieved materials is mentioned in Schedule of Credit Page No…………………. of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
