Tender For Construction Of Adivasi Bhawan At Baripada,Baripada, Mayurbhanj., Baripada-Odisha

TDR : 55200781

Tender Notice
BOQ

Expired

Baripada , Odisha

Tender Brief : Tender For Construction Of Adivasi Bhawan At Baripada,Baripada, Mayurbhanj.

Document Fees
₹ 10000 /-

EMD
₹ 293800.0 /-

Tender Value
₹ 2.93 Crore /-

Submission Date
08-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work excavation of foundation in all kind of soil within initial lead of 50m and initial lift of 1.5mm including dressing the sides leveling the bed and depositing the excavated materials away from the work site, shoring etc if required, complete the item of work in all respect as per direction of the Engineer-in-charge.
2	extra for every additional lift of 1.5 m or part there of in excavation/ banking excavated or stacked materials
3	Supplying & Filling foundation trenches , plinth & ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour cess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
4	Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.
5	Supplying , diluting and and preparing chemical emulsion like CHLORPYRIPHOS or other chemicals approved by central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional anti termite treatment and creating a chemical barrier under and around wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, surrounding the pipes and conduits etc. complete at the rate of 7.5 litres ( or as directed by the manufacturer) per sqm on vertical and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center etc. complete.as per IS:6313/1981 (PART-II) and as per the direction of engineer-in-charge including all cost of materials labour, taxes etc. all complete.
6	Providing and laying P.C.C[1:3:6] using 4cm size metal etc in foundation and floors using cement , 40 mm size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry including hoisting ,lowering and laying concrete to the required level, ramming ,watering and curing etc
7	Providing and laying in position ready mixed M25 grade concrete having compressive strength at 28 days test not lessthan 250kg/sq.cm for reinforced cement concrete work using cement content as per approved design mix etc including Rigid & smooth centering and shuttering.
8	For R.C.C foundation, footing bases of column, mass concrete,pre-cast etc.
9	For R.C.C plinth band etc.
10	R.C.C Beam & Coloum
11	Ground Floor
12	First Floor
13	Second Floor
14	Lintel
15	Ground Floor
16	First Floor
17	Second Floor
18	RCC Stair
19	Ground Floor
20	First Floor
21	Chaja
22	Ground Floor
23	First Floor
24	Roof Slab, Landing, Balcony
25	Ground Floor
26	First Floor
27	Second Floor
28	Cutting ,Straightening coiled or bend up HYSD/TMT Reinforcement bars welding or jointing if necessary , bending ,tying the grills as required for R.C.C works etcwinding wire extra
29	Foundation
30	Ground Floor
31	First Floor
32	Terrace Floor
33	Brick Wall Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 11 c.m x 8 c.m in Foundation & Plinth having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
34	Foundation and Plinth
35	Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 11 c.m x 8 c.m in superstructure having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
36	Ground Floor
37	First Floor
38	Terrace Floor
39	Fly Ash Brick masonry in cement mortar of mix [1:4] using Fly Ash bricks of size 25cm12cmx8cm in superstructure having crushing strength not less than 75 kg /m2 etc[Half Brick work]
40	Ground Floor
41	First Floor
42	Plastering & Painting Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost,conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P,sundries and scaffolding required for the work etc. as directed by the Engineer-in- charge.
43	GROUND FLOOR
44	FIRST FLOOR
45	Terrace FLOOR
46	Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary)including watering and curing,rounding of corners etc. complete with cost,conveyance,loading, unloading,royalities and taxes of all materials,cost of all labour,T&P,sundries and scaffolding required for the work etc. as directed by the Engineer-in- charge.
47	GROUND FLOOR
48	FIRST FLOOR
49	SECOND FLOOR
50	Finishing Wall Surface of wall with cement based wall putty two coats (water based )of approved and finished smooth and even surface to received painting including cost of scafolding, stagaing charges with cost of all material and takes labour T&P etc complete..
51	GROUND FLOOR
52	FIRST FLOOR
53	Terrace FLOOR
54	Providing and applying on New surface two coat of primer(water based) of approved make & shade by reputed manufacturer to make an even finished surface over a coat of primer with water bound cement primer in all heights with all scaffolding and staging charges including cost , conveyance, taxes of all materials, cost of all labours , T & P, sundries etc. as required for the work complete.
55	GROUND FLOOR
56	FIRST FLOOR
57	Terrace FLOOR
58	Supplying and painting of internal walls and ceiling with two or more coats of plastic emulsion paint on New surface which includes a coat of primer (water based)all complete. The shade and brand to be of approved brand & shade over the surfaces including preparation of surface, with cost of all materials, labour, conveyance taxes of all materials,scaffolding etc., as per the direction of the Engineer-in-charge.
59	GROUND FLOOR
60	FIRST FLOOR
61	Terrace FLOOR
62	Painting with synthetic enamel paint over a coat of primer of approved colour, shade and brand on New wood work /steel work in two or more coats as required to give an even shade including an under coat of suitable primer of approved brand and manufacturer including cost of all materials with taxes and transportation, loading, unloading, scaffolding, all labour, Labour cess, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge including filling gaps with putties, scrapping, sand papering and cleaning the surface to make free from rusts, dusts and oily substances before applying primer etc. complete.
63	GROUND FLOOR
64	FIRST FLOOR
65	FLOORING Supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of approved make conforming to I.S 13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 sand )and filling joints with white cement of approved quality including cost of all materials, labour T&P etc.required for the work all complete as per direction of engineer in charge.
66	GROUND FLOOR
67	FIRST FLOOR
68	Fixing vitrified tiles (600mm x 600mm) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete as per direction of engineer in charge.
69	GROUND FLOOR
70	FIRST FLOOR
71	Fixing Granite tiles (19MM thk) in floors treads or steps and landing on 25mm thick bed of cement mortar 1 :1 (1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete as per direction of engineer in charge.
72	GROUND FLOOR
73	FIRST FLOOR
74	DOOR & WINDOW Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).( Ref :-WPC Frame DSR Page No - 341 cl.26.86.)
75	Providing and fixing fiber rainforced plastic (FRP) door in cluding all fittings and cost, conveyance of all materials, labours and T&P required for the work etc, all complete as per direction of engineer in charge.
76	Tata Pravesh General Steel Finish/ wood finish Doors:Supply and fixing of 46mm thick GI doors and frame conforming to IS 277 galvanised plain skin passed sheets of 0.8mm in shutter and 12mm in frame with minimum 120 gsm zinc coating with profile dimension of 100mm x 58mm. Frame filled with Polyurethane foam and shutter duly filled with Honeycomb and both coated with minimum 60 microns of RAL powder coating. Accessories will be provided with doors.
77	Supplying, fitting and fixing of window (sliding type) made up Aluminium section 9778 as window frame, section no. 4095,4096 and 9777,3994 as shutter frame with 5mm thick glasss as panel fitted with rubber beading including locking arrangement including all fitting including cost of all material, taxes labour T&P including cost of glass etc. complete as per direction of Engineer-in-charge.
78	STEEL WORK Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing including cost, conveyance, loading, unloading, stacking, royalties and taxes of all materials, cost of all Labour, Labour cess ,Sundries, T&P required for the work etc.complete as per the direction of Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)
79	Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90mtr.C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification ,buffing, polishing etc with cost,conveyance,taxes of all materials, labour, T & P etc. requird for the complete in all respect.
80	2.0cm thick grading Plaster (1:4) on roof slab work as per the specification approved by the department & direction of E.I.C
81	Classilite , microlook M15, Armstrong false ceiling : Providing andfixing of CL-1 Exposed Tee Grid T-Bar Modular Ceiling 600x600mm.Armstrong ultimavector with peakform prelude 15/16\\"Installation shall be as per Manufacturers specifications(Armstrong).Comprises of 16 mm thk Texture of tile- Classiclite, edge oftile-Microlook, framing with suprafine M15 midrange Armstrong #main andcross tee T-3215 1.5 mm ( heightflange width of TEEthickness)galvanized section ,exposed tee will be powder coated and with ARMSTRONGmake suspension system i.e.anchor fastener,vertical hanger,hook clip etcas described.To be laid at all heights cut to all shapes and sizes andin the required grid pattern with necessary support from the civilceiling as per architects design, details and specifications. Includingnecessary light points / AC grills and other opening cuttings in theceiling tiles with all necessary scaffolding labour and other materialscomplete. The work shall include wastages, labour, all lead and lifts atall levels,loading and un loading, transportation and other incidentalcharges etc.,complete as directed bythe Engineer-in-charge.
82	Supplying, fitting,fixing Texture Paint characterized by a partially smoothed and partially textured appearance.
83	Modular Toilet Cubicle
84	GROUND FLOOR
85	FIRST FLOOR
86	Internal PH & Sanitary Works Supplying all materials, labour and T&P for fitting and fixing white glazed vitreous china porcelain Indian Pan water closet of size 23\\" of approved make confirming to IS-2556 and top inlet for sinking into floor with 100mm PVC 'P' trap etc. including supply of necessary cement concrete for fitting the closet etc. complete in all respect in all floors including cost, conveyance and taxes of all materials etc. complete and as per PH specification and direction of Engineer-in-charge.
87	Supplying all materials, labour, T&P and fixing standard sized shower (bath shower) of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge..
88	Supplying all materials, labour and T&P for fitting and fixing white glazed vitreous china porcelain wash basin of size 450mm x 300mmof approved make confirming to IS-2556 and top inlet for sinking into floor with 100mm PVC 'P' trap etc. including supply of necessary cement concrete for fitting the closet etc. complete in all respect in all floors including cost, conveyance and taxes of all materials etc. complete and as per PH specification and direction of Engineer-in- charge.
89	Supplying all materials, labour, T&P and fixing standard sized CP Bib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
90	Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge.
91	Supplying all materials, labour, T&P and fixing standard 15mm sized pillar cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
92	Supplying all materials, labour, T&P and fixing standard sized Long body 15mm dia CP Bib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge.
93	Supplying all materials, labour, T&P and fixing standard sized two way CP Bib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge.
94	Supplying all materials, labour, T&P and fixing standard sized shower (Health Faucet) of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge.
95	Supplying all materials, labour, T&P and fixing standard sized CP soap Dish holder of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
96	Supplying all materials, labour, T&P and fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge
97	Supplying all material, labour T&P and fixtures for providing and fixing of stain less steel sink of size600x450x225mm of approved make with its components like 40mm CP waste of cat no ALD 709, 40mm waste pipe etc, including all requisite fixing materials complete as per the PH specification and direction of Engineer-in-charge
98	Supplying all materials, labour, T&P and fixing standard sized sink cock of florentine single lever quaterturn of approved make complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in- charge.
99	Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge
100	Fixing 600x450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with Chromium Plated brass screws and washers complete as per specification and direction of the Engineer in charge
101	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge
102	Supplying all materials, labour, T&P and fittings and fixing of Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately)
103	Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge.
104	15 mm dia
105	20 mm dia
106	25 mm dia
107	32 mm dia
108	40mm dia
109	50 mm dia
110	Providing all materials, labour, Fitting & fixing of CPVC Ball Valve with CTS socket. Make : Prince)
111	25 mm dia
112	32 mm dia
113	40mm dia
114	50 mm dia
115	Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
116	Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
117	Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size300mm x 300mm with CI gulley trap, by Fly ash brick masonry in CM (1:4), CP (1:6) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:4:8) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge.
118	Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of all materials, curing, conveyance of all materials etc. all complete excluding GST as per specification & direction of Engineer-in-charge.
119	External PH Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge.
120	50mm dia
121	Supplying all materials & labour, T&P and constructing brick masonary chamber for water sluice valve, single air valve & non return valve with Fly ash brick masonary in cement mortar (1:4) as per approved drawing and specification CC (1:4:8) with 4cm size hard granite metal on the bed, 12mm cement plaster (1:6) to inside and cement flush pointing (1:6) to outside surface with 100mm thick RCC M20 cover slab with 20mm hg chips using required quantity of tor steel, centring and shuttering to the slab and dismantling it after 31 days of casting, filling the outside cavity with excavated materials, watering, curing including cost, conveyance, taxes of all materials, labour charges for cutting, bending, binding and tying the grills in proper position etc all complete as per drawing, design and direction of Engineer-in- charge.
122	Chamber (0.75x0.75x0.7mtr)
123	Septic Tank Earth work in excavation in Hard rock by mechanical means (Hydraullic excavator)/ manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) inculding disposal of excavated earth up to 50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, T & P required for the work complete as directed by the Engineer- in- charge.
124	Earth work excavation beyond 1.50mtr depth
125	Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.
126	Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
127	Providing and laying P.C.C[1:3:6] using 4cm size metal etc in foundation and floors using cement , 40 mm size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry including hoisting ,lowering and laying concrete to the required level, ramming ,watering and curing etc
128	Providing and laying in position ready mixed M25 grade concrete having compressive strength at 28 days test not lessthan 250kg/sq.cm for reinforced cement concrete work using cement content as per approved design mix etc
129	Foundation
130	RCC Wall
131	Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding,tying the grills as etc
132	Providing 12mm. thick cement plaster with cement mortar of mix (1:4) in all floors cement and with screened and washed sharp sand for mortar with neat cement punning finished smooth to brick/RCC walls after racking out the joints including watering and curing complete with cost, etc
133	Finishing walls with water proofing cement paint of approved shade on new work Two coat to give an even shade
134	Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.
135	Soak Pit Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge.
136	Providing and laying P.C.C[1:3:6] using 4cm size metal etc in foundation and floors using cement , 40 mm size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry including hoisting ,lowering and laying concrete to the required level, ramming ,watering and curing etc
137	Providing and laying in position ready mixed M25 grade concrete having compressive strength at 28 days test not lessthan 250kg/sq.cm for reinforced cement concrete work using cement content as per approved design mix etc
138	Providing 12mm. thick cement plaster with cement mortar of mix (1:4) in all floors cement and with screened and washed sharp sand for mortar with neat cement punning finished smooth to brick/RCC walls after racking out the joints including watering and curing complete with cost, etc
139	Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 12 c.m x 8 c.m in Foundation & Plinth having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
140	Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B)(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including transportation & scaffolding etc. all complete as per specification excluding GST & direction of the Engineer-in-charge.
141	110mmx110mm 'P' Trap (Make:Astral)
142	110mmx110mm 'P' Trap (Make:Astral)
143	110mmx87.5º Plain bend
144	110mmx87.5º Door bend
145	110mmx45º Plain bend
146	110mm dia single 'Y' withoutdoor
147	110mm WC connector/Bend with lip ring
148	110mm Socket plug
149	110mm Pushfit Coupler
150	Upvc Tee (150 x 150 x 150)mm
151	Upvc Elbow
152	TOTAL External PH WORK[I] Supplying, fitting and fixing of Antiskid Ceramic Floor Tiles in flooring using special plain / printed series Ceramic Floor Tile of premium grade ( having minimum thickness 7 mm to 8 mm & size 300 mm x 300 mm OR 600 mm x600 mm, confirming toI.S 13755 of approved quality and shade in floors, treads on steps and landings on 25 m.m thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened & washed sharp etc
153	Ground floor
154	First Floor
155	Supplying, fitting and fixing of ceramic glazed wall Tiles in skirting dado,risers of step and wall using special plain / printed series Ceramic wall Tile of premium grade ( having minimum thickness 6.5 mm to 6.7 mm & size 300 mm x 300 mm OR 600mm x300 mm,
156	Ground floor
157	First Floor
158	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cementcompound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
159	Internal Electrification Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. Make Conduit:Norepack/Precision/AKGWire-KEI/Havells/FinolexSwitch/socket-Legrand (myrius)/Panasonic(vision)/schneider(zencelo)
160	Group A
161	Group B
162	Group C
163	Subsequent point of group control
164	Supplying and fixing two module steeped type electronic fan regulator with proper modular plate switch box including connections etc. as required.Switch/socket-Legrand (myrius)/Panasonic(vision)/schneider(zencelo)
165	Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing board.
166	Supplying and fixing including testing and commissioning of 6A modular socket outlet with 6 Amp switch including providing GI modular box with faceplate etc as required. 1 nos 6 Amp 3-pin socket with 6 Amp switch.
167	Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.
168	Supplying, installation, testing & commissioning of 20 amp modular socket outlet on surface or in recess, on 1 Nos two module GI box with plate for socket point and one nos two module GI Box with face plate for switch etc. complete as direction of Engineer-in-charge. As per Crabtree(cat no-ACT0202504) or equivalent of Legrand/Schneider.
169	AC STARTER
170	Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLSH / LSZH insulated, copper conductor, single core cable Make- Finolex / Anchor / Polycab / HAVELLS / RR KABLE / KEI in recessed PVC conduit Heavy duty FRLS of mentioned size Make-AKG / BEC / Precision/Norpak as required as per direction of Engg.-in-Charge.
171	a) 2 x 2.5mm2 for inverter wiring
172	b) 2 x 1.5mm2 + 1 x 1.5mm2
173	c) 2 x 2.5mm2 + 1 x 1.5mm2
174	d) 2 x 4mm 2 + 1 x 1.5mm2
175	e) 4 x 6mm2 + 2 x 2.5mm2
176	f) 4 x 10mm2 + 2 x 4 mm2
177	Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge.
178	Supply and fixing of 15 Watt LED Tube light fitting.( Make: Havells / Bajaj/ Wipro/Philips/Crompton/Panasonic/Eq)
179	Supply and fixing of 18 Watt LED Bulb/Lamp fitting.( Make: Havells / Bajaj/ Wipro/Philips/Crompton/Panasonic/Eq)
180	Ceiling/ Wall mounted type BULK HEAD Luminaire with 10W LED Lamp.
181	Ceiling mounted 600mm X 600mm 36W Surface/recessed LED fixture
182	Supply and fixing of 1200mm sweep 5 Star BLDC Ceiling Fan (Make:Havells Efficiencia Neo /Bajaj/Crompton/Usha/Eq.) 1200 mm sweep
183	Supply and fixing of 230mm sweep metal exhaust Fan (Make:Havells Ventil Air DS/Usha/Orient/ Crompton /Eq)
184	Providing and fixing extra conduit down rod of 20 mm dia, 2 x 10 cm length wirng with 2 x 1.5 sq. mm FR PVC insulated single core multistrand copper conductor including painting etc. as erequired. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
185	Supplying and fixing of 3 pin, 5 amp ceiling rose ISI marked on the existing junction box / wooden block including connection etc. as required.
186	Supplying and fixing following way, TP and neutral, sheet steel, MCB distribution board, IP-43,IK09 with metal door ,415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBOs/ISOLATORS)Make-Legrand(Ekinoxe3/siemens(Betaguard)/Schneider Acti9 6 way, Double door
187	6 way, Double door
188	Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as requiredMake-Legrand/L&T/ABB
189	63 Amps4P MCB
190	40 Amps4P MCB
191	40 amp,30mA 4P RCCB
192	40amp,100mA 4P RCCB
193	6 Amp to 32 Amp, 10 KA SP MCB (C-Curve)
194	Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
195	20 mm
196	25 mm
197	250A 4P MCCB 25KA -1 No as incomer, 250A 4P Onlaod Changeover-01 No.,63A 4P MCCB 16KA- 10Nos,63A 4P MCB- 04Nos.& 40A DP MCB-04 Nos. with E.C Busbars Make: Legrand/ Hager/Schneider/Siemens
198	Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required
199	Providing and fixing 25 mm X 5mm GI strip on surface or in recess for connection etc as required.
200	Supply of 50 sq.mm 3 & 1/2 core XLPE Al.Armoured Cable of ISI marked.(Make -Polycab / Havells / KEI / RR Kable / Finolex / Gloster)
201	Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.
202	Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required.
203	Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. (3.5C x 35 sq.mm)
204	Supply and installation of Rubber Mats 8 mm thick
205	Fire Extinguishers Supplying installation testing and commissioning of ABC type fire extinguishers of 6 kg capacity confirming to IS:14609 & ABC powder confirming IS:13849 presurized with Nitrozen Gas marked.including cost of all material & labour for all floors & service building etc. all complete. Make-KANEX/FIRE SHILD /SAFEX or equivalent
206	Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket for all floors & service building etc. as per direction of Engineer-in-charge.Make-KANEX/FIRE SHILD /SAFEX or equivalentor equivalent
207	Provding and fixing brass ball valve with lever and screwed female ends for all floors & service building etc. as per direction of Engineer-in-charge.Make-ZOLOTO/KARTAT or equivalentor equivalent
208	Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.
209	32 Amp TPN 10 KA MCB, with DOL starter suitable for 5 KW rating motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp with Digital VoltMeter & Ameter(MCB+ Digital Voltmeter Ammeter+ Phase Indication lamp+Contactor+Starter@1295+890+890+600+6910+4185)
210	Supply, laying, connecting, testing & commissioning of following size of 1.1 kv grade multicore aluminium/ copper conductor XLPE insulated PVC sheathed armoured cable as per IS: 7098:1988 (Part-I) with upto date amendments etc. complete as required. Tagging on both the ends will be done with aluminium tags etc. complete as required.(Quantities as per site requirement shall be finally estimated & executed accordingly with prior approval.)
211	Supplying and making indoor end termination with brass compression gland (Heavy duty) and suitable copper / aluminium lugs for following size of XLPE insulated PVC sheathed copper/ aluminium conductor armoured/ unarmoured cable of 1.1 KV grade including cost of ferrules, cable sockets, insulation tape & other accessories etc. complete as required.
212	Providing and fixing following size of GI strips/ GI wire etc. on surface or in recess for connections, including GI clamps etc. as required.
213	Providing, laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to lS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc.,fixing the pipe on the wall/ceiling with proper core cutting & filling with treatment, providing proper supports, using clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required. Make:- SAIL/TATA/JINDAL or equivalent
214	Providing, fitting & fixing of following size cast iron double flanged slim seal wafer type Butterfly valves with EPDM rubber lined with lever operated as per IS-13095 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure for all floors etc. all complete as per specification & direction of E.I.C. Make-KIRLOSKAR/IVC/ZOLOTO/KARTAR/HONEYWELL or equivalent
215	Providing, fixing, testing and commissioning of following size cast iron double flanged type Non Return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C. Make-KIRLOSKAR/IVC/ZOLOTO/KARTAR/HONEYWELL or equivalent
216	Providing, fixing, testing and commissioning of 25 MM C.I. single Air Relief Valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of EIC. Make-KIRLOSKAR/IVC/ZOLOTO/VENUS/HONEYWELL or equivalent
217	Providing, fixing, testing and commissioning of 25MM SS Ball Valve suitable for test pressure of not less than 15kg/sqcm with nuts, bolts, gaskets, necessary accessories etc. all complete as per approved specification & direction of EIC. Make-KIRLOSKAR/IVC/ZOLOTO/VENUS/HONEYWELL or equivalent
218	Providing, fixing, testing and commissioning of 2 Way Fire Brigade inlet 63MM dia of CI body with 2 No. Gun Metal male instantaneous inlet couplings complete with cap and chain as required. For 100 mm dia M.S. Pipe connection conforming to lS : 904 as required With brick platform & duly painted with Post office red externally and white internally with synthetic enamel paint cornplete in all respect, for external hydrant, as required. (Fire Brigade inlet) Make:- KARTAR/NEWAGE or equivalent
219	Supply, Installation, Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves below of suitable size with all accessories as per direction of Engineer-in-charge. Make:- H-GURU/ALTRON or equivalent
220	Providing and fixing first aid fire hose reel drum wall mounting,swinging type fitted with 20mm dia.B129 30m long high pressure rubber hose type-II to IS.5132 or nylone braiieded polypropelene hose of approve make with 5mm outlet S.S nozzle with shut off valve(IS.884-1696
221	Suppy and fixing of wall mountaing type Auto glow sinage of different type ,fire exist with one side arrow/do not use lift incase of fire/Emergency Exit/Staircase Indicating Arrow etc.Sizes:300x150mm.Type
222	Buket Stand to Store 10 nos of Buket also having Aluminium sheet above the to prevent the stand from rain/sunst.
223	MISCELLANEOUS WORK : Sand Buket as per IS Specicification
224	Buket Stand to Store 10 nos of Buket also having Aluminium sheet above the to prevent the stand from rain/sunst.
225	Lightning Arrester Supply, Installation ,Testing & Commisioning of ESE Lightening Air Terminal early steamer emmision with OPR 60 with Radius of protection of 60 mtr in Level-1 in accoradance to NFC-17-102 standard as per the direction of E-I-C.
226	Supply, Installation ,Testing & Commisioning of Mounting Mast of Length - 2mtr 30mm dia as per the direction of E-I-C.
227	Supply, Installation ,Testing & Commisioning of GI Mounting mast of Length - 3mth with guy wire and base plate as per the direction of E-I-C.
228	Supply, Installation ,Testing & Commisioning of Lightening Flash Counter as per the direction of E-I-C.
229	Supply, Installation ,Testing & Commisioning of providing maintenance free chemical earthing furse 25 kg black fill compound for lighting arrester with all cost of copper bounded rod with earth pit as per the direction of E-I-C.
230	Supply, Installation ,Testing & Commisioning of 1C 70sqmm Copper Conductor as per the direction of E-I-C. Please Enable Macros to View BoQ information

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Adivasi Bhawan At Baripada,Baripada, Mayurbhanj., Baripada-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Adivasi Bhawan At Baripada,Baripada, Mayurbhanj., Baripada-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us