Tender For Day To Day Maintenance Works At Judicial Quarters Halla Jammu For The Financial Year( 2026-27) Upto September 2026, Jammu-Jammu And Kashmir

TDR : 55199549

Tender Notice
BOQ

5 Days Left

Jammu , Jammu And Kashmir

Tender Brief : Tender For Day To Day Maintenance Works At Judicial Quarters Halla Jammu For The Financial Year( 2026-27) Upto September 2026

Document Fees
₹ 600 /-

EMD
₹ 30000.0 /-

Tender Value
₹ 15 Lakhs /-

Submission Date
28-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Demolishing cement concrete manually / by mechanical means including disposal of material within 50 meters lead as per direction of Engineer incharge: 1:4:8 or leaner mix (i/c equivalent design mix) (Incl. carriages complete job)
2	Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.
3	Extra for cutting reinforcement bars manually/by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional areas of R.C.C. or R.B. work) as per direction of Engineer-in-charge
4	Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work
5	Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
6	Removing mortar from bricks and cleaning bricks incl. stacking with a lead of 50 Mtrs (Stacks of cleaned bricks shall be measured) from brick work in cement mortar
7	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :
8	Of area of 3 sqm. and below
9	Of area beyond 3 sqm
10	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :
11	Of area of 3 sqm. and below
12	Of area beyond 3 sqm.
13	Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
14	Demolishing mud phaska in terracing and disposal of material within 50 meters lead
15	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
16	Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead. With cement mortar 1:4 (1 cement : 4 fine sand)
17	Renewing glass panes, with putty and nails wherever necessary including raking out old putty : :
18	Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)
19	Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm).
20	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
21	1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
22	1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
23	1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
24	1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
25	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
26	Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
27	Extra for brick work/tile brick/AAC block masonry in superstructure above floor V level for each four floors or part thereof by mechanical means:
28	Half brick masonry with common burnt clay (non modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)
29	Extra for half Brick masonry in superstructure above plinth level upto floor V level.
30	Centering and shuttering including strutting, propping etc. and removal of form for:
31	Suspended floors, roofs, landings, balconies and access platforms
32	Edges of slabs and breaks in floors and walls Under 20 cm wide
33	Foundations, footings, bases of columns etc. for mass concrete.
34	Lintel, beams, plinth beams, girders, bressumers and cantilevers.
35	Columns, pillars, piers, abutments, posts and struts.
36	Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
37	Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
38	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars
39	Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
40	Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
41	Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead.
42	Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re plastering, including disposal of rubbish to the dumping ground within 50 meters lead.
43	White washing with lime to give an even shade :
44	Old work (two or more coats)
45	Old work (one or more coats)
46	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
47	Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
48	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
49	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.
50	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
51	15mm Cement plaster on the rough side of single or half brick wall of mix:
52	1 : 4 ( 1 cement : 4 fine sand)
53	1 : 6 ( 1 cement : 6 fine sand)
54	12mm Cement plaster of mix:
55	1 : 4 ( 1 cement : 4 coarse sand)
56	1 : 6 ( 1 cement : 6 coarse sand)
57	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
58	Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
59	Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat.
60	Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
61	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
62	Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.
63	Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
64	1 mm thick
65	2 mm thick
66	Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
67	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work (Parkash, Suyra Make) or equivalent
68	15 mm dia. nominal bore (Medium)
69	20 mm dia. nominal bore (Medium)
70	25 mm dia. nominal bore (Medium)
71	32 mm dia. nominal bore (Medium)
72	40 mm dia. nominal bore (Medium)
73	50 mm dia. nominal bore (Medium)
74	Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) (Parkash, Suyra Make) or equivalent
75	15 mm dia. nominal bore (Medium)
76	Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion
77	75mm dia pipe
78	110mm dia pipe
79	150mm dia pipe
80	Providing and fixing PVC pipe including / jointing with seal ring (Finolex / Supreme) of pressure @ 5.5 kg/Cm2
81	75mm dia plain bend
82	75mm dia door bend
83	75mm dia cowl
84	110mm dia plain bend
85	110mm dia door bend
86	110mm dia door Tee
87	110mm dia Tee junction
88	Reducer Tee 110 mm dia to 75mm dia
89	Cowl 110 mm dia
90	75mm dia Door Tee
91	150mm dia Plain Bend
92	150mm dia Door Bend
93	Providing and fixing PVC floor trap of Finolex / Supreme make
94	Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.
95	Orissa pattern W.C Pan of size 580x440 mm
96	Providing and fixing white vitrous china pedestal type water closet (Hindware/Cera/Parryware make) (European type W.C Pan) with 100mm PVC P&S trap incl. cutting and making good the walls and floors wherever required
97	Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :
98	White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps
99	White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap
100	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings
101	Providing and fixinground wash basin white vitrous china 450 mm dia complete (Hindware / Cera / Parryware make)
102	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively.
103	Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White
104	PVC connection for flushing cistern, wash basin, sinks etc
105	450 mm long
106	600 mm long
107	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid
108	Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
109	Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge
110	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
111	Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.
112	Providing and fixing of China Ware fittings (Superior Type as per the make and design specified by the Engineer-In-Charge)
113	Wash basin china ware (white) 600x470x160mm
114	Wash basin china ware size 565x435x215mm
115	Round wash basin Counter top size 545x545x185mm
116	Extended wall hung seat complete with cistern size 365x643x770mm
117	EWC with soft clearing seat cover size 360x360x680x755, S-Trap complete with
118	EWC with normal clearing seat cover size 350x480x390
119	Providing and fixing of china ware urinal partition
120	Providing and fixing of china ware urinal size 355x345x535mm
121	Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
122	Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
123	Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
124	Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931
125	Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
126	Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
127	Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth. White Agaria Marble Stone 18mm
128	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:
129	Semi rigid pipe 32 mm dia
130	Flexible pipe 32 mm dia
131	Providing and fixing C.P fittings 15mm nominal bore and fixtures (Superior Type as per the make and design specified by the Engineer-In-Charge)
132	Bib cock weight not less than 690 gms
133	Short nose bib cock
134	Long nose bib cock weight not less than 810 gms
135	Angle valve
136	Mixer for wash basin
137	Mixer for bathing (wall mixer)
138	Swan neck left / right tap
139	C.P gratings 4\\"
140	C.P gratings 6\\"
141	Soap dish
142	C.P. towel rod 2'-0\\"
143	C.P. towel rod 1'-6\\" (20mm dia)
144	Towel ring 200 mm dia
145	Waste coupling for wash basin 32 mm dia
146	Waste coupling for laboratory sink 50 mm dia
147	Shower with arm
148	Conceled stop cock with head
149	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge
150	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
151	610x460mm bowl depth 200mm
152	470x420mm bowl depth 178mm
153	Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete
154	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
155	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
156	Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
157	Extra for depth for manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
158	Demolishing W.C platform cement concrete and disposal of unservicable material upto dumping site at ground floor road side (maximum 3'-0\\"x4'-0\\"x1'-6\\")
159	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)
160	For fixed portion. Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
161	Powder coated aluminum (minimum thickness of powder coated 50 microns)
162	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)
163	For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
164	Powder coated aluminum (minimum thickness of powder coated 50 microns)
165	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.
166	Pre-laminated particle board with decorative lamination on both sides.
167	Repair to aluminium door shutters incl. refixing / fixtures / ACP sheets rubber gasket / aluminium beeding etc complete (Cost of ACP sheet paid separtely)
168	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
169	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness
170	Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
171	Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
172	300x16mm
173	250x16mm
174	Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
175	200x10mm
176	1500x10mm
177	100X10mm
178	Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
179	125mm
180	100mm
181	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer
182	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).
183	Second class teak wood (30mm thick)
184	Second class teak wood (35mm thick)
185	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
186	Particle Board 12mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked
187	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood 35mm thick
188	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood 30mm thick
189	Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:
190	2nd class teak wood 50 x 12 mm
191	50 x 20 mm
192	Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately).
193	GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
194	12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit
195	12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part-I, of size 595x595 mm, having perforation of9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
196	8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50 mm thick rock wool of 48 kg/cum backing.
197	Providing of water proofing treatment to the roof slab, W.C and bathrooms by Austrian technology using diamond shield and fiber mesh covered with two or more coats of specified chemical or using FOSROC, SIKA of BASF water proofing chemical. A primer coat of specified chemical to be applied before fixing / laying of fiber mesh complete
198	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
199	Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.
200	Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.
201	40mm thick with 20 mm nominal size stone aggregate
202	50 mm thick with 20mm nominal size stone aggregate
203	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.
204	Size of tile 600x600 mm
205	Providing and fixing Anti-skid premium tiles on floor (thickness to be specified by the manufacturers) of Ist quality of RAK, KAJARIA make in any colour laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) incl. pointing the joints with white cement and matching pigment etc complete
206	300x300mm
207	600x600mm
208	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete
209	Size of tile 600x600 mm
210	Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete
211	Disposal of unserviceable dismentled material / waste mulba by mechanical transportation outside Municipal limits incl. cost of loading, unloading, stacking complete (Trolly)
212	Grinding and polishing old terrazo flooring / skirting with floor polish of specified brand for smooth finishing incl. disposal of waste material of griding / polishing from site of work to dumping site at ground floor
213	Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels
214	Granite of any colour or shade (Area of slab over 0.5 sqm) 16mm thick
215	18mm thick
216	Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Grantine work)
217	Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)
218	Providing and fixing M.S wire guage to old wood shutters / steel shutters incl. removing and fitting of shutters complete
219	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.
220	Fixed to steel windows by welding
221	Fixed to openings / wooden frames with rawl plugs screws etc
222	Providing and fixing PVC Panelling in walls 8 to 10 mm thick incl. all fittings and fixtures complete (wall affair or any equivalent make)
223	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
224	15mm nominal bore
225	20mm nominal bore
226	25mm nominal bore
227	Providing 1 ¼ “ wooden moulded beading to the ceiling incl. cost of nails, wastage etc complete
228	Providing and fixing 1\\" wooden gola to the ceiling incl. cost of nails, wastage etc complete
229	Providing fency knoob to the cupboard shutters complete job
230	Providing and fixing 19mm thick wooden board shutters to cabnit incl. M.S hinges and screws complete
231	Providing and fixing hand held jet sprayer
232	Providing and fixing PVC bend 40mm dia (Superior)
233	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood
234	Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge.
235	Providing and fixing Anodized aluminum grill (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminum standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)
236	Aluminium sheet for doors 1mm thick
237	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
238	Hot finished welded type tubes
239	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
240	15mm nominal outer dia pipes
241	20mm nominal outer dia pipes
242	25mm nominal outer dia pipes
243	Providing and fixing 6 mm water proof ply complete job
244	Providing and fixing 12 mm water proof ply complete job
245	Providing and fixing 19 mm water proof ply complete job
246	Providing and fixing of 1.0mm thick sunmica incl. cutting, wastage fevicol, nails carriage etc complete item (Virgo, Amulya or equivalent make)
247	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
248	25 mm nominal bore
249	32 mm nominal bore
250	40 mm nominal bore
251	50 mm nominal bore
252	Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
253	0.63 mm thick with zinc coating not less than 275 gram/m2
254	Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40sq.decimetre for chimney stacks, sky light etc
255	0.80 mm/0.63 mm/0.50 mm thick
256	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
257	With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (35mm thick)
258	Supply and installation of Armstrong Medintech Plus PUR homogenous vinyl sheet flooring , Inc, 2 metre wide and overall thickness of 2mm. The thickness of wear layer would be 2mm. The product should be homogeneous and single layered. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC with TRUESHILED technology, Plasticizers without DOP, Urethane, colour pigments and filler calendered to from a sheet, colour and pattern details shall be dispersed throughout the thickness of the wear layer, Medintech Plus shall conform to group \\"I\\" wear resistance as per EN 649. Clean room certified with class 'A' as per ASTMF5100. Flammability resistance of class BA-sl as per GB8624-2006, Dynamic coeffcient of friction of class DS as per EN 13893, Thermal resistance of 0.072m2K/W as per EN 12667, Thermal conductivity of 0.071W/mK as per EN12524, impact sound reduction of 3dB as per ISO 10140. Slip resistance of class R9 as peDIN 51130. Residual indentation of 0.03mm as per GB/T 4085-2005. Color fastness rating of 6 as per ISO 105-B02, total weight being 2.8kg/m2 as per EN430. The product shall be suitable for applications in class 23/34/43 areas as per EN685. Product shall exhibit antistatic behaviour, resistance to bacteria, resistance to chemical, resistance to staining suitablity to castor chair. The product shall be floor score certified with no SVHC content published by European Chemicals Agency (REACH), Product shall contribute to LEED points under Indoor environment quality (LEED EQ) and material and resource (LEED MR) category
259	Providing and fixing of brass phase for taps / pillar cocks (heavy duty)
260	Providing and fixing of door mats of standard make
261	Providing and fixing cupboards incl. frame of 2nd class deodar wood 19mm thick partical board with decorative shutters incl. internal box of 19mm partical board complete with paiting with all fittings and fixtures
262	Providing and fixing wallpaper of required colour, shade and design of standard make as directed by the Engineer -In-Charge
263	Providing and fixing acrylic name plate (writing on both sides)
264	Supply of Labour (Mazdoor) for various day to day works as per directions of engineer in charge
265	Supply of CARPANTER for various day to day works as per directions of engineer in charge
266	Supply of PLUMBER for various day to day works as per directions of engineer in charge
267	Supply of SWEEPER for various day to day works as per directions of engineer in charge
268	Supply of technican
269	Supply of mason 1st class
270	Supply of welder
271	Supply of portable welding machine and for repair to various steel works incl. carriage
272	Supply of portable generator set incl. carriage
273	Cleaning of PVC overhead water tanks by engaging Machines as per directions of engineer in charge
274	Providing & fixing of Multi Locks to Cup-boards (Godrej)
275	Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete
276	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
277	Providing and fixing ball bearing for rolling shutters.
278	Providing and fixing of PVC sheet (2mm thick)
279	Providing and fixing of 19mm thick pre-laminated board in paneling over wooden frame including removing of old damaged paneling and anti-termiting the same (complete job) laminated 8mm thick AC4 water resistant
280	Providing and fixing painting wire gauge shutters, comprising as per window frame of built up MS sections 12mm x 50mm rectangular tube with wire guage shutter made of Z-section including hinges, riveted with frame of 20mm x 3mm flat iron complete job (sample window available at High Court building) including priming and painting as per directions of engineer in charge.
281	Providing and fixing of wooden flooring of specified shade and brand as per directions of engineer in charge including base coat of foam complete job.
282	Providing and fixing wooden profile Grade A to wooden flooring of specified brand as per direction of enigneer in charge
283	Grinding and polishing old Kota Stone / Chips flooring surface with floor polish of specified brand.
284	Providing / fixing polycorbonate sheet including wastage of 02mm thick (50 Micron) complete job
285	Providing / fixing polycorbonate sheet including wastage of 10mm thick (50 Micron) complete job
286	Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat
287	Providing and fixing Brass Name Plate written on both side of Hon'ble Justices. (complete) letters on Both sides
288	Proving / fixing of pre-laminated board partition fixed on both sides, fixed over wooden frame of Ist class kail wood complete job including painting of cupboards etc.
289	Providing and Laying 80mm thick factory made antiskid, anti glazed PCC interlocking paver blocks of M-40 design mix as per IS: 15658: 2006 (Avg. compressive strength of 8 paver blocks shall be minimum 47.2 N/mm2 minimum thickness of wearing layer is 6mm, max abrasion resistance 2mm, maximum water absorption of 3 units is 6% by mass) made by high quality paver blocks making machine with high level of compaction and vibration and of approved size and shape laid in required colour and pattern (pigment used shall not be more than 10% of weight of cement used in wearing course layer) and including 50mm (+5mm) thick compacted bed of naturally occuring, clean, well graded, sharp coarse sand (passing 4.75mm sieve) of uniform moisture content 4% to 8% at the time of spreading. Paver units should be placed with the help of spacer (2mm, 3mm wide) of uncompacted sand cutting machine, filling the spaces between 25mm and 50mm wide concrete having minimum 1:1:2 cement : sand : 20mm crushed stone aggregate mix. After laying paver blocks they shall be compacted with high frequency, low amplitude mechanical flat plate vibrator having plate area sufficient to cover a minimum of 12 paving units, after compaction joint filling by sand shall be spread over the pavement (Joint filling sand shall pass a 2.36 mm No. 8 sleve) an complete as per direction of Engineer-in-charge
290	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (12\\"x18\\")
291	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
292	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
293	Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Medium shade using 50% white cement and 50% ordinary cement.
294	Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
295	Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm
296	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
297	Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of tile 600x600 mm
298	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
299	Providing and fixing of PVC covers for PVC water storage tanks
300	Providing and fixing of blind for windows incl. all fixtures and fittings and necessary arrangements etc complete job (superior quality)
301	Vertical blind
302	Roller blind
303	Zebra blind
304	Repairs to existing blinds
305	Providing and fixing of curtains of standard size incl. stitching, rings etc complete job (superior quality) 3'-0\\"x8'-0\\"
306	Providing and fixing flex board complete with hollow section M.S pipe frame work complete job
307	Buttiny / grinding of stainless steel railing by way of buffing machine
308	Providing and fixing of honour board made of wooden board / ply / acrylic sheet incl. writing with stickers
309	Providing and fixing of S/S side steel brackets
310	Providing and fixing of S/S side finners
311	10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation 10.0
312	Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion
313	75 mm diametre
314	110 mm diametre
315	Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete:
316	40 mm
317	50 mm
318	Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm
319	With 2nd class teak wood beading 62x19 mm
320	With 12 mm mild steel U beading
321	Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete
322	125 mm
323	Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete
324	Twin rubber stopper
325	Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete
326	Triple strip (Vertical type)
327	Providing and fixing of telescopic channel 16\\" complete set with necessary screws / arrangement (Godrej, Link)
328	Providing and fixing of door seat with necessary screws etc complete
329	Providing and fixing of Door lock handle
330	Providing and fixing of ACP sheet incl. cutting, wastage with necessary nails etc complete (Bettech / VIT / Interia) make
331	Providing and fixing of S/S curtain rod pipe with side brackets and finners complete
332	Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete
333	20 mm dia
334	25 mm dia
335	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
336	Providing and fixing of S/S Honour board / Name Plate incl. writing, engraving, painting etc complete item as per direction of engineer incharge.
337	Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed byEngineer-in-Charge.
338	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected:
339	Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures
340	French spirit polishing, Two or more coats on new works including a coatof wood filler
341	Polishing on wood work with ready mixed wax polish of approved brandand manufacture on New work
342	Finishing walls with Acrylic smooth exterior paint of required shade:13.119.1 Old work (two or more coats applied @ 1.67 liters/10sqm onexisting cement paint surface)
343	Old work (one or more coats applied @ 0.90 liters/ 10sqm)
344	Renewal of old putty of glass panes (length)
345	Re-lettering with black Japan paint of approved brand and manufacture.
346	Disposal of mulba by way of carriagethrough tipper/ trolley
347	Repair to sensor door glss including sensor
348	Providing and fixing of sun board including writing the matter complete job
349	Providing and fixing casement handle made of zinc alloyed (white powdercoated) for UPVC casement window with necessary screws etc. complete.
350	Providing and fixing zinc alloyed (white powder coated) touch lock for UPVCsliding window with necessary screws etc. complete
351	Providing and fixing steel roller for UPVC sliding window with necessaryscrews etc. complete
352	Providing and fixing steel roller for UPVC sliding door with necessary screwsetc. complete
353	Providing and fixing steel (white powder coated) crescent lock for UPVCsliding window/ door with necessary screws etc. complete
354	Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge
355	Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal ofsilt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tankincluding marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as perdirection of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made@ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothingextra will be paid on this account)
356	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge
357	Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete
358	125x65x2.12 mm
359	100x58x1.90 mm
360	75x47x1.70 mm
361	50x37x1.50 mm
362	Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Fixing with carbon steel galvanized dash fastener of required dia and size (to be paid for separately)
363	washing of Dirty curtains including removing from the existing rings and re fixing the same after ironing all complete
364	Providing and fixing WPC pannels as per the direction of engineer incharge .
365	Providing and fixing of CP pillar cock on wash basins
366	Providing and fixing toilet paper holder C.P. brass
367	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
368	40 mm nominal bore
369	50 mm nominal bore
370	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)
371	15 mm nominal bore
372	20 mm nominal bore
373	25 mm nominal bore
374	40 mm nominal bore
375	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks)
376	Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
377	Finishing walls with Acrylic smooth exterior paint of required shade:13.119.1 Old work (two or more coats applied @ 1.67 liters/10sqm onexisting cement paint surface)
378	Old work (one or more coats applied @ 0.90 liters/ 10sqm)
379	Providing and fixing glazed shutters for doors, windows and clerestory windowsusing 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws. (35 mm thick ) Second class Deodar Wood
380	Providing and fixing glazed shutters for doors, windows and clerestory windowsusing 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws. (30 mm thick ) Second class Deodar Wood
381	Centering and shuttering including strutting, propping etc. and removal of form work for:4.6.1 Foundations, footings, bases for columns
382	Retaining walls, return walls, walls (any thickness) including attached pilastersbuttresses, plinth and string course fillets, kerbs andsteps etc.
383	Lintel, beams, plinth beams, girders, bressumers and cantilevers
384	Repair of Mechanical Barrier for Traffic Control
385	Providing and fixing of Barbed wire in different locations on water tanks and pipes.
386	Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mmwith ½” BSP thread and shapes, weighing not less than 60 gms
387	Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required.
388	P/F of films Black/Frosted or asper the necessity of site on glass panes or wherever necessary.
389	P/F of MS welded wire mesh for windows or different openings wherever required.
390	P/F of crystal white quartz single bowl kitchen sink (24 x 18 x 9 inches) including waste coupling,waste pipe complete job.
391	P/F of 15mm CP spreader two way
392	Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
393	Providing and fixing of sensor door fully Glazed complete job as per the necessity of site and direction of HON'BLE High Court Authorities with 12 mm thick tuffen glass with Doorma Make sensor equipments with all necessary fittings
394	Providing and fixing 12mm thick of Tuffrn glass as per requirement of site and directions of enginner Incharge
395	Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.13.89.1 One coat
396	Two coats
397	Distempering with 1st quality Acrylic/oil bound washable distemper(ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as permanufacturers’ specifications, one or more coats on old work
398	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.).
399	Flooring with marble stone of specified thickness as per sample ofmarble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with:Makrana White Second quality
400	Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class teak wood
401	Engaging JCB for various day to day works
402	Providing and fixing Micro Ribbed contineous line puf wall pannel 50 mm thick with inner and outer skin 0.50mm , puff density 40+- 2 Kg/M3 RAL 9002 (sheet make - Jindal/ Tata/ Lloyd equivelent.) Pannel make BANAL/Jindal/lloyd or equivelent
403	Providing and fixing nyloon make cricket net as per requirement of Durable Strength
404	Carriage of material by mechanical transport incl. loading / unloading, stacking at site of work:-
405	Stone Aggregate above 40mm nominal size (average lead 15.00 kms)
406	Stone Aggregate below 40mm nominal size (average lead 15.00 kms)
407	Sand (average lead 15.00 kms)
408	Bricks (average lead 15.00 kms) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jammu And Kashmir Tenders

Services Tenders

Hospitality Related Services Tenders

Housekeeping Services Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Day To Day Maintenance Works At Judicial Quarters Halla Jammu For The Financial Year( 2026-27) Upto September 2026, Jammu-Jammu And Kashmir

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Day To Day Maintenance Works At Judicial Quarters Halla Jammu For The Financial Year( 2026-27) Upto September 2026, Jammu-Jammu And Kashmir

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us