Tender For Construction Of Library Building At Rehan, Tehsil Fatehpur, District Kangra (Hp) (Sh:- Construction Of Building Portion Including Water Supply And Sanitary Installation, Rain Water Harvesting, Saptic Tank, And Boundary Wall With Gate) Esti, Fatehpur-Himachal Pradesh

TDR : 55198587

Tender Notice
BOQ

7 Days Left

Fatehpur , Himachal Pradesh

Tender Brief : Tender For Construction Of Library Building At Rehan, Tehsil Fatehpur, District Kangra (Hp) (Sh:- Construction Of Building Portion Including Water Supply And Sanitary Installation, Rain Water Harvesting, Saptic Tank, And Boundary Wall With Gate) Esti

Document Fees
₹ 7000 /-

EMD
₹ 775100.0 /-

Tender Value
₹ 3.87 Crore /-

Submission Date
30-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation in earth work by mechanical means (Hydraulic excavator)/manual means in foundation trenches etcetra in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, pick jumper work, pick jumper blasting work, jumper blasting work, soft and hard blasting and doing work in wedging out rocks where blasting work is prohibited or any other mixed variety of soil including shoring, strutting, dewatering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the serviceable and unserviceable material clear from the edge of excavation within all leads and lifts as directed by the Engineer-in-charge and then returing the stacked soil in 15cm. (fifteen centimeters) layers, when required into plinths and side of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge, within all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads, lifts and other incidentals charges. The rate including royality charges, octroi, malkana, sale tax, Toll tax, GST. and any other taxes imposed by the Government.
2	Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights/ depths below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetera and mass concrete as per approved drawing, design or as directed by the Engineer-in-charge including carriage of materias within all leads, lifts and other incidental. The rate including royality charges, octroi, malkana, sale tax, toll tax G.S.T. and all other taxes as imposed by the Government.
3	Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights / depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetera upto any thickness upto all floor level as per approved drawing, design or as directed by the Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
4	Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights / depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, sides and soffits of beams, haunchings, cantilevers, girders, bressumers and lintels upto any height/depth/thickness upto all floor level as per approved drawing, design or as directed by the Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkana, sale tax, toll tax G.S.T. and all other taxes as imposed by the Government.
5	Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights / depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in columns, pillars, posts and struts, (square, rectangular or polygonal in plan) in any height/thickness/depth upto all floor level as per approved drawing, design or as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkana, sale tax, toll tax G.S.T. and all other taxes as imposed by the Government.
6	Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights / depth below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in stair cases with slopping or stepped soffits excluding landings upto all floor level as per approved drawing , design or as directed by the Engineer -in-charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkana, sale tax,toll tax G.S.T. and all other taxes as imposed by the Government.
7	Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width etcetera upto all floor level as per approved drawing , design or as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkana, sale tax, toll tax,G.S.T. and all other taxes as imposed by the Government.
8	Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in weather shade , Chajjas, corbels etcetera including edges as per approved drawing, design or as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkana, sale tax, toll tex G.S.T. and all other taxes as imposed by the Government.
9	Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in lintels exceeding any span moulding as in window sills, cornices, string courses, bands, copings, bed plates, anchor blocks and the like upto all floor level complete as per H.P.P.W.D. specification or as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
10	Providing form work with steel plates 3.15mm(three point one five millimeter)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeter),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling upto any height and removal of the same for in situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like etcetera upto all floor levels as per approved drawing , design or as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkana, sale tax, toll tax,G.S.T. and all other taxes as imposed by the Government.
11	Providing and laying in position mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded broken /crushed stone aggregate 40mm(forty millimeters) nominal size) and curing complete excluding the cost of form work in all works upto plinth level in all depths including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing ,design specification, and as directed by Engineer in charge. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
12	Stone filling tightly hand packed with hard stone of approved quality under floor including watering, ramming ,consolidating and dressing complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
13	Supplying and filling in plinth with sand under floors including watering, ramming ,consolidating and dressing complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
14	Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (twenty newton per square millimetre) for reinforced cement concrete work using cement content not less than @ 330 kg/cum. (at the rate of three hundred thirty kilogramme perb cubic meter) or as per approved design mix. All works upto plinth level to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera as per specification, approved drawing, design and as per direction of Engineer-in-charge including carriage of material with in all leads, lifts and other incidental. The rate including royality charges, octroi, malkana, sale tax, toll tax,G.S.T. and all other taxes as imposed by the Government.
15	Providing and laying in position machine batched and machine mixed cement concrete of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (twenty newton per square meter) for reinforced cement concrete using cement content not less than @ 330 kg/cum. (at the rate of three hundred thirty kilogramme per cubic meter) or as per approved design mix. All works above plinth level upto all floor level to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetra as per specification, approved drawing, design and as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
16	Coursed rubble masonry (first sort) with hard stone of approved quality in foundation and plinth with Cement mortar 1:6 (one cement isto six coarse sand) upto all height/depth including pumping or bailing out water/dewatering and curing complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
17	Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D (five hundred D) of TATA,Tiscon/ Sail for R.C.C. (reinforced cement concrete) work including straightening, cutting, bending, placing in position and binding all complete upto all floor level as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
18	Providing and laying damp proof course 100mm ( one hundred millimeters ) thick with cement concrete 1:2:4 (one cement isto two coarse sand isto four graded /crushed stone aggregate 20mm (twenty millimeter) nominal size) and curing complete including form work as required at site and carriage of material within all leads, lifts and other incidental charges as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
19	Providing and applying a coat of residual petroleum bitumen of Grade of VG-10 (Viscosity Ten) of approved quality using 1.70 Kg. (one point seven zero kilogram) per square meter on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly socked in kerosene oil complete including carriage of materials with in all leads,lifts and other incidential as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
20	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level upto floor all level with cement mortar 1:4 (one cement isto four coarse sand) and curing complete including carriage of materials with in all leads,lifts and other incidential as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
21	Brick work with common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5 (seven decimal five) in super structure above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
22	Brick work with common burnt clay F.P.S. (Non modular) bricks of class designation 7.5 (seven decimal five) in super structure above plinth level upto all floor level in cement mortar 1:4 (one cement isto four sand) and curing complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
23	Providing 2nd (second class) deodar wood work in frames of doors, windows, clerestory windows and other frames, wrought, framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately) as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
24	Random rubble masonry/polygonal rubble masonry (uncoarsed/brought to coarses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement isto six coarse sand isto twelve graded stone aggregate 20 mm (twenty millimeter) nominal size) upto plinth level with Cement mortar 1:6 (one cement isto six coarse sand) as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
25	Providing and fixing 40mm (forty millimeter) thick first class deodar wood panelled or panelled and glazed shutters for doors having top rail 100x40mm (one hundred into forty millimeter), middle rail 150x40mm (one hundred fifty into forty millimeter) panel of 12mm (twelve millimeter) thick both side prelaminated and bottom rail shall be 200x40mm (two hundred into forty millimeter) infill water proof particle board panel of Action / Tesa / Century / Kitlam below lock rail and 6mm (six millimeter) thick glass panes of Modigaurd/Saint gobain/KT series above lock rail including black enamelled iron butt hinges with necessary screws as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
26	Providing and fixing wood polymer composite (WPC) frame of SV woods or equivalent as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, sale tax, GST or any other taxes imposed by the Government
27	Providing and fixing to existing door frames 30mm (thirty millimeter) thick factory made panel PVC flush door shutter consisting of frame made out of M.S. tubes of 19 (nineteen) gauge thickness and size of 19 mm x 19 mm (nineteen millimeter into nineteen millimeter) for styles and 15x15 mm (fifteen into fifteen millimeter) for top and bottom rails of Rajshri. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm (five millimeter) thick heat moulded PVC 'C' channel of size 30 mm (thirty millimeter) thickness, 70 mm (seventy millimeter) width out of which 50 mm (fifty millimeter) shall be flat and 20 mm (twenty millimeter) shall be tapered in 45 (forty five) degree angle on both side forming styles and 5 mm (five millimeter) thick, 95 mm (ninety five millimeter) wide PVC sheet out of which 75 mm (seventy five millimeter) shall be flat and 20 mm (twenty millimeter) shall be tapered in 45 (forty five) degree on the inner side to form top and bottom rail and 115 mm (one hundred fifteen millimeter) wide PVC sheet out of which 75 mm (seventy five millimeter) shall be flat and 20 mm (twenty millimeter) shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (ten millimeter) (5mm x 2 )(five millimeter into two) thick, 20 mm (twenty millimeter) wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm (five millimeter) thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles and rails with 7 mm (seven millimeter) (5 mm+2 mm) (five millimeter +two millimeter) thick x 15 mm (fifteen millimeter) wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm (five millimeter) thick PVC strip of 20 mm (twenty millimeter) width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etcetra including fixing of PVC shutter with existing frame with M.S. butt hinges100x50x1.90mm (one hundred into fifty into one point ninety millimeter) size with necessary screws etcetra complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
28	Providing and fixing 35 mm (thirty five millimeter) thick factory made decorative prelaminated ISI marked flush door shutters of Marino or its equivalent conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st (first) class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. including carriage of material within all leads, lifts and other incidental charges as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
29	Providing and fixing M.S. grills, made of 10mm (ten millimeter) MS square Bars welded to 6x12mm (six into twelve millimeter) MS flat. Distrance between bars should not be more than 150mm (one hundred fifty millimeter) c/c (centre to centre) total grill should be power coated and fixed to window frame with screws in wooden/steel frames of windows etcetra with M.S. flats, square or round bars etcetra with round headed bolts and nuts or by screws including priming coat with approved steel primer all complete including carriage of material within all leads, lifts and other incidental charges as per approved drawings , design, specification, entire satisfaction and as directed by Engineer in charge. The rate including royality charges, octroi, malkana, sale tax, toll tax G.S.T. and all other taxes as imposed by the Government.
30	Providing and fixing cold roll formed section of Elixir 3000 series / NCL section color 5000 series or equivalent: Door frame fabricated from galvanised powder coated steel section of 1.2mm (one point two millimeter) thickness (Base steel as per IS: 513) with zinc of 120 grams (one hundred twenty grams per square meter). The overall size of section should be 105x60mm (one hundred five into sixty millimeter). These frames are provided with a groove for gasket to give perfect sealing for single rebate door frame. The frame should be provided with 3 Nos. (three numbers) of M.S. powder coated 4\\" (four inches) butt hinges of 2mm (Two milimetres) thickness welded to the frame, 6 (Six) numbers 1.2mm (One decimal Two milimetres) thick CRCA electroplated stiffeners should be welded to the frame, 6 (Six) numbers of 8\\" (eight inches) M.S. hold fasts with split end tail welded to stiffener plates, one no aldrop receiver. Each frame shall be provided with 25x50mm (Twenty five into Fifty milimettres) section as tie rod at the bottom. All welded places shall be treated with protective coat of zinc rich primer. The entire frame should be provided with a coat of matched primer and powder coated with pure polyester powder upto 50-60 (Fifty-Sixty) microns and door frames can be filled with puf as per manufactuer's specifications as per Architect Standard design, specification complete including carriage of materials within all leads, lifts and other incidentals, as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge.The rate including royality charges, octroi, malkana, sale tax, toll tax G.S.T. and all other taxes as imposed by the Government.
31	Providing and fixing cold roll formed section of Elixir 3000 series / NCL Sec color 5000 series roll formed section or equivalent Door frame fabricated from galvanised powder coated steel section or 1.2mm (one point two millimetre) thick (Base steel as per IS:513) with zinc of 120gm/Sqm. (one hundred twenty grams per square metre). The overall size of section should be 125x60mm (one hundred twenty five into sixty millimetre) with double rebate for door frame. The overall frame should be coated with pure polyester powder upto 50-60 (fifty to sixty) micron thickness. The frame should be provided with three numbers of M.S. powder coated 4\\" (Four Inches) butt hinges of 2mm (Two milimetres) thickness welded to the main frame, 6 (Six) numbers 1.2mm (One decimal Two milimetres) thick CRCA electroplated stiffeners should be welded to the frame, 6 (Six) numbers 8\\" (eight inches) M.S. hold fasts with split end tail welded to stiffener plates, one no aldrop receiver. Each frame shall be provided with 25x50mm (Twenty five into Fifty milimettres) section as tie rod at the bottom. All welded places shall be treated with protective coat of zinc rich primer. The entire frame should be provided with a coat of matched primer and powder coated with pure polyester powder upto 50-60 (Fifty-Sixty) microns and door frames can be filled with puf as per Architect Standard design, specification complete including carriage of materials within all leads, lifts and other incidentals, as per approved architectural drawing, design, specification or as directed by the Engineer-in-Charge. The rate including royality charges, octroi, malkana, sale tax, toll tax G.S.T. and all other taxes as imposed by the Government.
32	Providing and fixing windows/ventilators fabricated from roll formed sections made of galvanized steel colour coated / powder coated (base steel as per IS: 513 \\"D\\" quality, hot dip galvanized as per IS 277 with zinc of 120 grams/sq. mtr.) (one hundred twenty gramme/square meter) with total coated thickness 0.72 mm (zero point seven two millimeter) for outer frame and 0.58 mm (zero point five eight millimeter) for other sections. Coated section should have a coat of epoxy primer of 5-7 (five to seven) microns thick finish painted with a polyster paint of 12-16 (twelve to sixteen) microns thick and back coated with Alkyd backer of 5-7 (five to seven) microns of powder coated with pure polyester powder upto 50-60 (fifty to sixty) microns thick. Section for frame should be made of 98x50x0.72mm (ninety eight into fifty into zero point seven two millimeter), thickenss, section for mullion should be of 46x70x0.58mm (forty six into sevety into zero point seven eight millimeter) thickness, sections for additional mullion should be of 30x44x0.72mm (three hundred into forty four into zero point seven two millimeter) thickness, section for shutter frame should be of 46x46x0.58mm (forty six into forty six into zero point fifty eight) thickness, section for fixed glass bead should be of 18x25x0.58mm (eighteen into twenty five into zero point five eight millimeter) thickness and Section for fly mesh shoutter frame should be 20x40x0.58mm (twenty into forty into zero point five eight millimeter) thickness and section for mesh fixing should be 18x6x0.58mm (eighteen into six into zero point five eight millimeter) thickness. All glazed shutter should be provided with one set of MS powder coated friction hinges, one number of high grade aluminium powder coated handle, each mesh shutter should be provided with one set of pivot hinges and Section colour make handleand Latch. Glass panes should be double glass unit 6mm (six millimetre) toughened KT series fixed window glass (outside) + 12mm (twelve millimetre). Argon gas filled + (Inside) clear toughened glass or equivalent technical values. The glass shall be without any flaws, buvvles, scratches etetra including steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16x3.15mm (Sixteen into Three decimal fiftee milimetres) lugs 10cm (Ten centimetres) long embedded in cement concrete blocks 15x10x10cm (Fifteen into ten into Ten centimetres) size of 1:3:6 (Ome cement: Three sand : Six graded stone aggregate 20mm (Twenty milimetres) nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings, including providing and fixing glass panes with glazing clips and special metal sash putty of approved make as per architectural drawing, design and specification or as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals complete. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
33	Providing and fixing 25mm (Twenty five millimetre) thick one side prelaminated water proof commercial board of Century Ply / kit ply exterior/interior grade ISI marked for SDB shutters with 6mm (six millimetre) thick hard wood edging all round and PGI sheet lining inside of the shutters of approved shade complete as per specification, approved drawing, design and as directed by Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
34	Providing and fixing glazing with glass panes of 5 mm (five millimeter) thickness (weight not less than 12.50kg/ sqm) (twelve point five zero killogramme per square meter) Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus glazing in shutters of door, window, ventilator and partitions etcetra with EPDM rubber / neoprene gasket and nails complete as per the architectural drawings and the directions of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
35	Providing and fixing complete box of cup board made of 25mm (twenty five millimetres) thick water proof Termite resistant commercial board of Uniply/ Green ply/Century ply/Kit ply /Duro ply / Marino (ISI Marked ) including 19 mm (nineteen millimeter) thick shelves and back side of the cup board shall be of 6/8 mm (six/eight millimeter) thick water proof ply as per drawing and all cut portions of the board shall have 6mm (six millimeter) thick hard wood edging .The shutter from all sides shall also have 6mm (six millimeter) thick hard wood adjust lipping. The shutter from outside shall to be finished with 1mm (one millimeter) thick lamination of Century / Greenlam / Action Tesa / Merinolam of approved shade including fixing Top PTMT handles 125mm (one hundred twenty five millimeter) long shall be provided in wood colour fixing with nickel plated bright finished piano hinges with necessary screws etcetera complete (Area for Payment shall be measured from front face only) as per specifications , approved Drawing and design or as directed by Enginner-in-charge including carriage of materials within all leads, lifts and other incidentals complete. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
36	Providing and fixing magnetic catcher of approved quality in cup-board/ward robe shutter including fixing with necessary screws complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
37	Providing and fixing 65x35mm (Sixty five into Thirty five millimetre) special quality chromium plated brass cup-board locks or ward robe locks with six levers of approved quality including necessary screws etcetra complete (Indian make of approved quality) as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
38	Providing and fixing 25mm (twenty five millimeter) diameter stainless steel curtain road having wall thickness of 1.25mm (one point two five millimeter) with two chromium plated brass brackets fixed with C.P. brass screws and P.V.C. sleeves etcetera wherever necessary complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
39	Providing and fixing 300x16mm (three hundred into sixteen millimeter) size aluminium sliding door bolts ISI marked anodized (anodic coating not less grade AC-10 (ten) as per IS:1868) transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
40	Providing and fixing 250x16mm (two hundred fifty into sixteen millimeter) size aluminium sliding door bolts IS marked anodized (anodic coating not less then grade AC-10 (ten) as per IS:1868) transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
41	Providing and fixing 250x10mm (two hundred fifty into ten millimeter) anodized aluminium towel bolt barrel type ISI marked anodized (anodic coating not less then grade AC-10 (ten) as per IS:1868) transparent or dyed to required colour and shade with necessary screws etcetera complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
42	Providing and fixing 150x10mm (one hundred fifty into ten millimeter) anodized aluminium towel bolt barrel type ISI marked anodized (anodic coating not less than grade AC-10 (ten) as per IS:1868) transparent or dyed to required colour and shade with necessary screws etcetera complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
43	Providing and fixing 150mm (one hundred fifty millimeter) aluminium handles ISI marked anodized (anodic coating not less than grade AC-10 (ten) as per IS:1868) transparent or dyed to required colour and shade with necessary screws etcetera complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
44	Providing and fixing 125mm (one hundred twenty five millimeter) aluminium handles ISI marked anodized (anodic coating not less than grade AC-10 (ten) as per IS:1868) transparent or dyed to required colour and shade with necessary screws etcetera complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
45	Providing and fixing 250mm (two hundred fifty millimeter) size bright finished brass hard drawn hooks and eyes complete in all respect as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
46	Providing and fixing Aluminum die cast body tubular type universal Hydraulical door closer (having brand logo with ISI IS:3564) emborsed on the body with necessary accessories and screws etcetera complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
47	Providing and fixing aluminium hanging twin rubber floor door stopper, ISI marked, anodised (anodic coating not less than grade AC-10 (ten) as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera complete as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
48	Applying cement slurry on Reinforcement Cement concrete slab or cement concrete work using 2.75 kgs. (Two point seventy five Kilogram) Of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as per HP. PWD specifications or as directed by Engineer-in-charge including carriage of materials within all leads,lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax G.S.T. and all other taxes as imposed by the Government.
49	50 mm (fifty millimeter) thick cement concrete flooring 1:2:4 (one cement isto two sand isto four graded stone aggregate 20 mm (twenty millimeter) nominal size) laid in one layer finished with a floating coat of neat cement as per HP. PWD specifications or as directed by Engineer-in-charge including carriege of materials within all leads,lifts and other incidentals charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
50	Supplying and filling broken/ crushed stone/ aggregate/brick bats/brick aggregates 40 mm (forty millimeter) nominal size in filter tank/soak pit as per HPPWD specifications and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
51	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel of Tata, Sail/Reliances/Jindal as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per HPPWD specifications and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
52	Providing and fixing M.S. Railing made of 19 X 19 mm (nineteen into nineteen millimeter) M.S. Solid square bar and 1.9X.5 cm (one point nine into five centimeter) M.S. Flat spike (12 cm (twelve cenntimeter high) at top complete in all respect as per specification approved drawing, design and as direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
53	Providing and laying 25mm (twenty five millimeter) thick Chima Pink/ Dark Brown Granite in combination with Lakha red Grenite/Black Granite as per pattern and detail gang saw cut mirror polished, premoulded and pre polished in flooring laid over 20mm (twenty millimeter) base of cement mortar 1:3 (one cement isto three sand) and jointed with grey/white cement slurry mixed with pigment to match the shade of granite stone including rubbing, curing, moulding and polishing to edges to give high glass finish etcetera complete as per Architectural drawing, design and specification and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
54	Providing and laying 19 mm (Nineteen millimeter) thick Polished Grey/ Chima Pink Granite Stone having Semi Round nosing as per detail gang saw cut, mirror polished, premoulded and pre polished in work top of Pantary / under counter wash basin and water trough laid over 20mm (twenty millimeter) (average) thick base of cement mortar 1:3 (one cement isto three sand) and jointed with grey/white cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per Architectural drawing ,design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
55	Providing and laying 19 mm (nineteen millimeter) thick polished chima Pink/Grey granite stone in single piece with uniform nosing / edging as per detail gang saw cut, mirror polished, pre moulded and pre polished in floaring laid over 20mm (twenty millimeter) (average) thick base of cement mortar 1:3 (one cement isto three sand) and jointed with grey/white cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per Architectural drawing ,design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
56	Providing and laying 600 X600 mm (six hundred into six hundred millimeter) Full body Matt finish Vitrified tiles of Restile /Nitco / Simpolo/ Orient -Bell / Rak /Kajaria / AGL / /Johnson / Somany of approved shade and design with water abserption less then 0.08% (zero point zero eight percent) and confirming to IS:15622 in flooring laid on a bed of 20mm (twenty millimeter) thick cement mortar 1:4 (one cement isto four coarse sand) and jointed with neat cement slurry @3.3kg/sqm (three point three kilogramme per square meter) including curing and grouting of joints with white cement mixed with pigment of required shade to match the shade of tiles complete as per approved drawing , design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
57	Providing and laying (600x 600mm x 10mm) ( six hundred into six hundred into ten millimeter) Antiskid Double Charge / Ultra Charge Full body vetrified tiles of Restile /Nitco /Rak /Kajaria / Orient -Bell /AGL / Simpolo /Johnson / Somany of approved shade and design with water absorption less then 0.08% (zero point zero eight percent) and confirming to IS:15622 in flooring laid on a bed of 20mm (twenty millimeter) thick cement mortar 1:4 (one cement isto four sand) and jointed with neat cement slurry @3.3kg/sqm (three point three kilogramme per square meter) including curing and grouting of joints with white cement mixed with pigment of required shade to match the shade of tiles complete as per approved drawing , design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
58	Providing and laying 400x400x12mm (four hundred into four hundred into twelve millimeter) Antiskid Matt Finish tile of AGL / Orient -Bell / Nitco / Kajaria / Johnson / Simpolo / Somany of aproved shade and design, as per approved shade and design with water absorption less than 0.08 % (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in Flooring / skirting, riser of steps, over 20mm (twenty millimeter)/12 mm (twelve millimeter) thick bed of cement mortar 1:4 (one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogramme per square meter) including grouting the joints with white cement mixed with pigment of required shade to match the shade of tiles complete as per approved drawing , design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
59	Providing and laying 300X300 mm (three hundred into three hundred millimeter) antiskid ceremic tiles of premium quality of Nitco/AGL / RAK / SIMPOLO / Kajaria / Somany / Orient Bell /Johnson tiles as per approved shade in flooring laid over 20mm (twenty millimeter) thick cement mortar 1:4 (one cement isto four coarse sand) jointed with grey cement slurry @3.3Kg/sqm (three point three kilogramme per square meter) including painting the joints with white cement and matching pigment as per approved drawing , design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
60	Providing and fixing 19 mm (nineteen millimeter) thick chimma Pink/Grey Granite in combination with Lakha Red / Black Granite as per pattern and detail gang saw cut, mirror polished, premoulded and prepolished, in skirting risers of steps and similar locations of required size, approved shade, colour and texture laid over 12 mm (twelve millimeter) thick base of cement mortar 1:3 (one cement isto three coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all level as per approved drawing , design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
61	Providing and laying Full body Matt finish Vitrified tiles of Restile /Nitco / Simpolo/ Orient -Bell / Rak /Kajaria / AGL / /Johnson / Somany as per approved shade and design of the office Size of Tile 600x600 mm (Six hundred into six hundred millimeter) (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm (twelve millimeter) thick bed of cement mortar 1:3 (one cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogramme per square meter) including grouting the joint with white cement and matching pigments etcetera complete as per approved drawing , design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
62	Providing and laying antiskid Double Charge / Ultra Charge vetrified tiles of Restile /Nitco /Rak /Kajaria / Orient -Bell /AGL / Simpolo /Johnson / Somany as per approved shade and design of the office Size of Tile 600x600 mm(Six hundred into six hundred millimeter) (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps and dado upto any height over 12 mm (twelve millimeter) thick bed of cement mortar 1:3 (one cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogramme per square meter) including grouting the joint with white cement and matching pigments etcetera complete as per approved drawing , design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
63	Providing and laying 300x600 mm (three hundred into six hundred millimeter) Ceramic Glazed tiles Dado of Kajaria / Nitco / Simpolo / Somany/ Johnson / Orient and Bell / Agl in skirting, risers of steps and dado upto any height with one Border matching /Contrast at top over 12mm (twelve millimeter) thick cement mortar 1:3 (one cement isto three coarse sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per approved drawing , design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
64	Providing and laying 300x450 mm (three hundred into four hundred fifty millimeter) Ceramic Glazed Tiles Of Kajaria / Nitco / Swastik / Somany/ Johnson / Orient and Bell / Agl Tiles in skirting, risers of steps and dado upto any height laid on 12mm (twelve millimeter) thick cement mortar 1:3 (one cement isto three sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per approved drawing , design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
65	Providing and laying 300 X300 X 25 mm( three hundred into three hundred into twenty five millimeter) Labrador Design ( Rainbow Series) tiles of NTC / Unistone / Atlantic as per approved design and shade in flooring (ramp) laid on 20mm (twenty millimeter) average thick base of cement mortar 1:4 (one cement isto four coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of tiles including rubbing and granite polish finish as per architect standred design and specification complete and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
66	Providing and fixing 50mm (fifty millimeter) diameter SST (Stainless steel) pipe Of Kich handrail slip resistant in ramp at two level i e 75cm (seventy five centimeter) and 90cm (ninety centimeter) height welded with 25mm (twenty five millimter) diametre stainless steel pipe balusters embedded in cement concrete @ (at the rate) 60cm (sixty centimeter) centre to centre and jointing with electrical gas welding at top alongwith hand rail of stainless steel pipe of 50mm (fifty millimeter) diametre handrail should be extended 30cm (thirty centimeter) beyond top and bottom of the ramp as per detail in approved drawing , design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
67	Providing and fixing stair case railing having hand rail of 50 mm (fifty millimeter) dia SST (Stainless steel) pipe fixed with 35 mm (thirty five millimeter) diameter. stainless steel baluster as per detail in combination of 35mm (thirty five millimeter) diameter and 15/20mm (fifteen/twenty millimeter) diameter SST (stainless steel) baluster knock down railing of KICH hand rail fixed on 10X50mm (ten into fifty millimeter) S.S.flat, balusters placed at 1200 mm (one thousand two hundred millimeter) centre to centre along with 3 (three) nos @ 16 MM (sixteen millimeter) mid rail connected at the side of the baluster with fixtures .The baluster would be fixed on the floor with casted base plate minimum 6mm (six millimeter) thick base plate shall be concealed with suitable S.S. 316 grade cover cap .railing made of Hollow tubes, channels, plates etcetera including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approved drawing , design and specifications as per approved drawing , design, specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
68	Providing and fixing factory made prepainted steel sheet ridges or hips having proper gola/ shape of corrugation of steel sheet 60cm (sixty centimeter) overall with 0.60 mm (zero point six zero millimeter) thick prepainted steel sheets of Tata / Sail / Reliance / Jindal in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster, organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) diameter prepainted G.I. limpet and bitumen washers complete with all accessories as required per approved drawing , design, specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
69	Providing and fixing valley 90cm (ninety centimeter) overall with 0.60mm (zero point six zero millimeter) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / Jindal steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster, organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) diameter with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per approved drawing , design, specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
70	Providing and fixing 0.60 mm (zero point six zero millimeter) thick prepainted steel sheet (ISI Marked-Z 120) of Tata Durashine / Sail / Reliance / Jindal steel in roofing withhot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP), organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia metre with prepainted limpet and rubber washers complete with all accessories as required as per approved drawing , design, specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
71	Providing and fixing 30cm (Thirty Centimetre) wide 25cm (Twenty five centimetre) deep plain G.I. sheet gutter of 0.60mm (Zero point six zero millimetres) thick prepainted sheet of Tata / Sail/Reliance/Jindal fixed with bolts, nuts and washers etcetera having dome shape grating which shall be of M.S. plate 25x5/6mm (twenty five into five/six millimeter) aquare round shape with 6mm (six millimeter) dia meter in dome including bolts, nuts and washers and making necessary connections with rain water pipe complete as per approved drawing , design and specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
72	Providing and fixing M.S. B.P. sheet 2.0mm (two millimeter) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-Incharge (frame work shall be measured and paid separately) including fixing complete as per approved drawing , design, specifications and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
73	Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD ( P - 3160- 3mm ) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero squate meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm (three hundred millimeter) vertically. The 2nd coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st coat, then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement isto four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millimetre) per 50kg (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky.complete as per approved drawing, design and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
74	Providing and fixing flashing 38 cm (thirty eight centimeter) overall with 0.60 mm (zero point six zero millimeter) thick prepainted sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia meter and prepainted G.I. limpet and bitumen washers complete as per approved drawing , design, specifications and as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
75	Providing and fixing 150 mm (one hundred fifty millimeter) diameter on wall face unplasticised Rigid PVC (D-Plast) rain water pipes single socketed confirming to IS:13592 Type-A ISI marked of Finolex / Relpipe (reliance) / Vectus of working pressure 4/6 kg/cm2 (four/six kilogramme per centimeter square) including joints with sealring confirming to IS:5382 leaving 10mm (ten millimeter) gap for thermal expansion including filling the joints with approved adhesive complete as per approved drawing , design, specifications or as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government..
76	Providing and fixing on wall faces Poly Vinyl Chloride accessories for rain water pipes ISI marked of Finolex/Relpipe (reliance)/Vectus including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government. P.V.C. Plain bend 150 mm ( One hundred fifty millimetres ) nominal diameter.
77	Providing and fixing on wall faces Poly Vinyl Chloride accessories for rain water pipes ISI marked of Finolex/Relpipe (reliance)/Vectus including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government. P.V.C. plain shoe 150 mm ( One hundred fifty millimetres ) nominal diameter.
78	Providing and fixing PVC clamps 150mm (one hundred fifty millimetre) unplasticised P.V.C. pipe clips of approved design to unplaticised PVC rain water pipe by means of 50x50x50mm (fifty into fifty into fifty millimeter) hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortor 1:4 (one cement into four coarse sand) and making good the wall etcetera complete as per approved drawing, design and as directed by Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
79	Structural steel work of TATA / SAIL riveted, bolted or welded in built up sections in trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer in trusses and trussed purlins in buildings etcetra as per approved drawing, design and as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
80	Providing and fixing doors, windows and ventilators frame manufactured from M.S.channels section ISLC-75 (seventy five) M.S. channels sections 75 X 40 X 4 mm (seventy five into forty into four millimeter) flapped with flat 75mmx4mm (seventy five into four millimeter) in combination welded together to make one frame as per drawing and design including hinges, jamb, lock jamb beed and if required angle thrashold mild steel angle 50x25mm (fifty into twenty five millimeter) welded or rigidly fixed by machenical means, lugs, with split end tails to each jamb including iron butt hinges 2.5mm (two point five millimeter) thick with a provision for locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface as per approved drawing, design or as directed by Engineer-in-charge complete including carriage of material within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
81	Painting steel works with Deluxe Multisurface paint of Asian/Nerolac to give an even shade two or more coats applied @ 0.90 ltr/ten sqm (zero point nine zero litre per ten square meter) over an under coat of primer @ 0.80 ltr/10sqm (zero point eight zero litre per ten square meter of approved brand and manufacture) complete as per approved drawing , design, specifications and as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
82	Painting wood works with Deluxe Multisurface paint of Asian/Nerolac to give an required shade two or more coats applied @ 0.90 ltr/10 sqm (zero point nine zero litre per ten square meter) over an under coat of primer @ 0.75 ltr/10sqm (zero point seven five litre per ten square meter) of approved brand and manufacture complete as per approved drawing , design, specifications and as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
83	6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand) upto all floor level complete as per approved drawing , design , specifications and as directed by Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax,G.S.T. and all other taxes as imposed by the Government.
84	15mm (fifteen millimeter) thick cement plasters with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and/ or rounded angles in all girth and finished even and smooth and curing complete upto floor all level as per Architectural drawing ,design, specification and as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
85	15mm (fifteen millimeter) thick cement plasters with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and/ or rounded angles in all girth and finished even and smooth and curing complete upto floor all level as per Architectural drawing ,design, specification and as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
86	15mm (fifteen millimeter) thick cement plasters with cement mortar 1:5 (one cement isto five sand) in single coat on fair side of brick/concrete/stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and/ or rounded angles in all girth and finished even and smooth and curing complete upto floor all level as per Architectural drawing ,design, specification and as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
87	Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth including curing complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
88	Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth including curing complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
89	20mm (twenty millimeter) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in two coats backing coat 10mm (ten millimetre) and finishing coat 10mm (ten millimeter) thick on fair side of brick/stone masonary walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth including curing complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
90	Providing and applying JK/Birla white cement based putty of average thickness 1 mm (one millimeter) , of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete after thoroughly brushing the surface free from mortar drops, dirt, dust, loose material and other foreign metter and sand papered smooth to give final matt finish to the surface upto all floor level complete as per approved drawing specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
91	Finishing walls with Apex weather proof exterior emulsion paint of Asian /Deluxe/Nerolac Surakasha paints of approved shade having VOC less than 50 gm/litre (fifty grame per litre) and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance, exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. (one point four three litre per ten square meter) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (zero pont nine zero litre per ten square meter) upto all floor level as per approved drawing, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
92	Forming Groove of size 15mm (fifteen millimeter) wide and 15mm(fifteen millimeter) deep groove in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per drawing, design and specification as per directions and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
93	Providing and fixing 12mm (twelve millimetre) thick Unistone / NTC / Atlantic stone cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding upto floor all level complete and carriage of materials with in all leads, lifts and other incidentals as per specifications, approved drawing, design and as per the direction and entire satisfaction of Engineer- In-Charge. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
94	20mm (twenty millimeter) thick pattern in cement plaster with cement Mortar 1:4 (one cement isto four coarse sand) complete as per approved drawing, design, specifications and directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
95	Providing and fixing decorative screen in enterance verandah/coridor manufactured from 25x25mm (twenty five into twenty five millimeter) hollow square pipes welded with M.S. hollow sections of size 50mm x 50mm (fifty millimeter into fifty millimeter), supported on 10 cm (ten centi meter) diameter M.S. hollow pipes. A centre piece shall be of 25 x 3mm (twenty five into three millimeter) M.S. flat frame covered with M.S. black sheet cut to shape as shown in drawing and beading all round the pattern of 8x8mm (eight into eight millimeter) squar solid bars as per detail. M.S. black sheet box bracket covered with MS flat covering in shape as per detail and applying a priming coat of approved steel primer as per approved drawing , design, specifications or as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
96	Providing Plinth protection with 40 mm (forty millimeter) thick interlocking paver blocks of NTC with 23 cm (twenty three centimeter) diameter Half round RCC (reinforced cement concrete) pipe for drainage purpose laid over 10 cm. (ten centimeter) thick cement concrete 1:4:8 (one cement isto four sand isto eight graded stone aggregate) in bedding/haunching of pipe complete as per Architectural drawing ,design, specifications or as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
97	Wall painting (two or more coats) with acrylic washable emulsion of Asian paints / Berger paints/ Dulux paints/Nerolac paints (above Dado/skirting) of approved shade for interior grade on un-decorated concrete/stone/plastered wall surfaces to give an even shade, including thoroughly brushing the surface free from mortar droppings, other foreign matter and sand papered smooth including necessary putty to give smooth and even surface, complete as per Architectural drawing ,design, specifications and as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
98	Wall painting with premium acrylic emulsion paint of approved shade of Asian paints/ Nerolac paints / Berger Paints/ Dulux paints based water thinnable sealer of approved brand and manufactuer for interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre (fifty grams per litre) of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour complete as per architectural drawing, specifications or as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
99	Wall painting with acrylic emulsion paint, Asian paints / Dulux paints / Nerolac paints / Berger Paints/ having VOC (Volatile Organic Compound ) content less than 50 grams/ litre (fifty grams per litre) of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour complete as per architectural drawing, specifications or as directed by Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
100	Providing and fixing 600x600mm (six hundred into six hundred millimetre) designer board of everest ( E-Board) ceiling of ISI mark with pre-painted GI channel framing @ 600mm (six hundred millimetre) center to center including fixing to base frame with screws and clamps as per detail given in the approved drawing, design or as directed by Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
101	Providing and fixing mineral fibre false ceiling tiles of size 595x595mm (five hundred ninety five into five hundred ninety five millimeter) ACP ceiling with prepainted G.I. chanel framing at the rate of 600mm (Six hundred millimeter) centre to centre as per pettern detail in the drawing, specifications or as directed by Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
102	Providing and laying in position cement concrete 1:2:4 (one cement isto two sand isto four graded broken /crushed stone aggregate 20mm(twenty millimeters) nominal size) of specified grade vibrated and mechanically mixed and curing complete excluding the cost of form work: all works upto plinth level in all depths including carriage of material within all leads, lifts and other incidentals charges as per approved drawing ,design specification, and as directed by Engineer in charge. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
103	Providing and laying 60mm (sixty millimeter) thick factory made cement concrete interlocking paver block of M-30 (M-thirty) grade made by block making machine with strong vibratery comaction of approved size, design and shape laid in required colour and pattern over and including 50mm (fifty millimeter) thick bed of coarse sand,filling the joints with fine sand etcetera all complete as per specification and as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals charges as per approved drawing ,design specification, and as directed by Engineer in charge. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
104	Providing and laying in position cement concrete 1:3:6 (one cement isto three sand isto six graded broken /crushed stone aggregate 40mm (forty millimeters) nominal size) of specified grade vibrated and mechanically mixed and curing complete excluding the cost of form work: in all works upto plinth level as per approved drawing ,design specification, and as directed by Engineer in charge including carriege of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
105	Supplying and fixing 455 x 610 mm (four hundred fifty five into six hundred ten millimeter) (light duty) reactangular C.I. (cast iron) cover with frame,weight of cover with frame to be not less then 38kg (thirty eight kilogramme) (single seal pattern=1) as per HPPWD specifications and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
106	Providing and fixing 20x20 mm (twenty into twenty millimeter) square bar M.S Foot rest fixing in man holes with 20x20x10 Cm (twenty into twenty into ten centimeter) cement concrete blocks 1:3:6 (one cement isto three sand isto six graded /crushed stone aggregate) 20 mm (twenty millimeter) nominal size) as per standard design. as per HPPWD specifications and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
107	Providing and fixing 110 mm (one hundred ten millimeter) diameter PVC Cowl ISI marked of Supreme / Finolex/Relpipe (Relience)/Vectus including fixing with approved adhesive etcetera complete as per H.P.P.W.D. specificaton or as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
108	Providing and fixing 75mm (seventy five millimeter) nominal bore/diameters P.V.C cowl ISI marked of Finolex / Relpipe (Relience) / Vectus including fixing with approved adhesive etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, G.S.T.,Toll Tax, Sales tax or any other taxes imposed by the Government.
109	Providing and fixing ISI marked water lifting pump of 1.00 HP (one horse power) of Kirloskar/Crompton including all accessories and making necessery connection as required at site for its functioning complete.) as per HPPWD specifications or as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax,G.S.T. and all other taxes as imposed by the Government.
110	Providing and laying in trenches 20mm (twenty millimeter) nominal bore galvanised mild steel tube (medium grade) tube fitting including trenching and refilling etcetera . as per HPPWD specifications and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
111	Providing and laying in trenches 15mm (fifteen millimeter) nominal bore galvanised steel tube (medium grade) tube fittings including trenching and refilling etcetera as per HPPWD specifications and as directed by the Engineer-in Charge including carriage of materials within all leads, lifts and other incidental charges. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
112	Providing and fixing 1620 (one thousand six hundred twenty) (20mm) (Twenty milimetres) outer diametre Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, (Eighty degree centigrade) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 metre (One metre) spacing including cutting charges and making good the wall and testing of joints etcetera complete as per direction of the Engineer-incharge including carriage of materials with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
113	Providing and fixing 2025 (two thousand twenty five) (25mm (Twenty five milimetres) (OD) outer diametre Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, (Eighty degree centigrade) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 metre (One metre) spacing including cutting charges and making good the wall and testing of joints etcetera complete as per direction of the Engineer-incharge concealed work including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. The rate including royality charges, octroi, malkana, sale tax, toll tax, G.S.T. and all other taxes as imposed by the Government.
114	Making connection of galvanised Mild Steel distribution branch with galvanised Mild Steel main 20mm to 40mm (twenty millimeter to forty millimeter) nominal bore by providing and fixing tee including cutting and threading the pipe complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.
115	Providing and fixing 110mm (one hundred ten millimeter) nominal bore/diameters High pressure PVC spigot and socket, waste and ventilating pipes class A 4.00 to 4.6mm thick (Four point zero to four point six millimetre) thick ISI marked of Finolex / Relpipe (Relience) / Vectus including fixing with approved adhesive etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, G.S.T, Toll Tax Sales tax or any other taxes imposed by the Government.
116	Providing and fixing 75mm (seventy five millimeter) nominal bore/diameters High pressure PVC spigot and socket, waste and ventilating pipes Class A 4.00 to 4.6mm thick (Four point zero to four point six millimetre) thick ISI marked of Finolex / Relpipe (Relience) / Vectus including fixing with approved adhesive etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, G.S.T, Toll Tax Sales tax or any other taxes imposed by the Government.
117	Providing and fixing 110mm (one hundred ten millimeter) diameters P.V.C clamps ISI marked of approved design of Finolex / Relpipe (Relience) / Vectus to PVC pipe with steel screws and rawal plugs and making good the walls etcetera complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana,Toll Tax, G.S.T, Sales tax or any other taxes imposed by the Government.
118	Providing and fixing 75mm (seventy five millimeter) diameters P.V.C clamps ISI marked of approved design of Finolex / Relpipe (Relience) / Vectus to PVC pipe with steel screws and rawal plugs and making good the walls etcetera complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana,Toll Tax, G.S.T, Sales tax or any other taxes imposed by the Government.
119	Providing and fixing 110mm (one hundred ten millimeter) nominal bore/diameters P.V.C. heal rest bend ISI marked of Finolex / Relpipe (Relience) / Vectus Confirming to IS no-14735-99 including filling the joints with approved adhesive including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, G.S.T,Toll Tax Sales tax or any other taxes imposed by the Government.
120	Providing and fixing 75mm (seventy five millimeter) nominal bore/diameters P.V.C. heal rest bend ISI marked of Finolex / Relpipe (Relience) / Vectus Confirming to IS no-14735-99 including filling the joints with approved adhesive including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, G.S.T,Toll Tax Sales tax or any other taxes imposed by the Government.
121	Providing and fixing 110mm (one hundred ten millimeter) nominal bore/diameters P.V.C. plain bend of Finolex / Relpipe (Relience) / Vectus Confirming to IS no-14735-99 including filling the joints with approved adhesive including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, G.S.T,Toll Tax, Sales tax or any other taxes imposed by the Government.
122	Providing and fixing 75mm (seventy five millimeter) nominal bore/diameters P.V.C. plain bend of Finolex / Relpipe (Relience) / Vectus Confirming to IS no-14735-99 including filling the joints with approved adhesive including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, G.S.T,Toll Tax, Sales tax or any other taxes imposed by the Government.
123	Providing and fixing 110mm (one hundred ten millimeter) nominal bore/diameters ISI marked PVC collar of Finolex / Relpipe (Relience) / Vectus confirming to IS:14735-99 complete upto all floor level as per HPPWD specifications and as directed by the Engineer-in-Charge, including fixing with approved adhesive including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, G.S.T,Toll Tax, Sales tax or any other taxes imposed by the Government.
124	Providing and fixing 75mm (seventy five millimeter) nominal bore/diameters ISI marked PVC collar of Finolex / Relpipe (Relience) / Vectus confirming to IS:14735-99 complete upto all floor level as per HPPWD specifications and as directed by the Engineer-in-Charge, including fixing with approved adhesive including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, G.S.T,Toll Tax, Sales tax or any other taxes imposed by the Government.
125	Providing and fixing 110x90mm (one hundred ten into ninety millimeter) ISI marked P.V.C floor trap of Finolex / Relpipe (Relience) / Vectus confirming to IS:14735-99 of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per specification or as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, G.S.T,Toll Tax, Sales tax or any other taxes imposed by the Government.
126	Providing and fixing 110x75mm (one hundred ten into seventy five millimeter) ISI marked P.V.C floor trap of Finolex / Relpipe (Relience) / Vectus confirming to IS:14735-99 of self cleaning design complete including fixing with approved adhesive, cost of cutting and making good the walls and floors etcetera complete as per specification or as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, G.S.T,Toll Tax, Sales tax or any other taxes imposed by the Government.
127	Providing and fixing white vitreous China wash down water closet (European type W.C. pan) of star Constellation No. S No. 20087(S-10) of size 57x35x39Cm (fifty seven into thirty five into thirty nine centimeter) of Hindware /Cera/ Jaquar of star white / snow white shade with white solid plastic sheet and lid 10 (ten) litre low level white P.V.C. flushing cistern as per drawing and detail and C.P. flush bend with fittings and cast iron brackets 40 mm (forty millimeter) flush bend over flow arrangement with specials and standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and and fixed with jet pressure and intergal P or S trap including jointing the trap and soil pipe with adhesive of approved brand. (Jet Spray to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of royality charges, Malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
128	Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm (five hundred thirty into four hundred ten millimeter) of Hindware/Cera/Jaguar and white shade with integral type foot rests with 100 mm (one hundred millimeter) diameter sand cast Iron P or S trap, 10 (ten) litre low level P.V.C. flushing cistern,of Hindware , Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, GST, Malkana, Toll Tax, Sales tax or any other taxes imposed by the Government.
129	Providing and fixing 32 mm (thirty two millimeter) diameter P.V.C. flexible waste pipe of Supreme / Finolex / Relpipe (Reliance ) , Vectus for sink or wash basin including P.V.C. waste fittings complete as per specifications or as directed by Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, G.S.T., Malkana,Toll Tax, Sales tax or any other taxes imposed by the Government.
130	Providing and fixing G.I. (galvanised iron) inlet connection for flush pipe connecting with W.C. pan. including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, Malkana, G.S.T.,Toll Tax, Sales tax or any other taxes imposed by the Government.
131	Providing and fixing vitreous China flat back under counter wash basin Garnet No.10080 of size 58x43Cm (fifty eight into forty three centimeter) of HINDWARE/CERA/JAQUAR of star white/snow white shade with single hole for 15mm (fifteen millimeter) C.P. brass pillar tap, 32mm (thirty two millimeter) C.P. brass waste of standard pattern with C.I. or M.S. brackets painted white including cutting holes and making good the same wherever required and nacessary fittings complete as per Architectural drawing ,design and specifications including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, Malkana, G.S.T, Toll Tax, Sales tax or any other taxes imposed by the Government.
132	Providing and fixing white Vitreous China flat back wash basin Delta No.10010 without pedestal of size 55x40 Cm ( Five five into forty centimetre) of HINDWARE/CERA/ JAQUAR as per drawing/detail with mirrior above of star white / snow white shade with single hole for 15mm (fifteen millimeter) C.P brass Pillar Tap , 32mm (thirty two millimeter) C.P brass waste of standard pattern with C.I. or M.S. brackets painted white including cutting holes and making good the same wherever required and necessary fittings complete (Mirror to be measured and paid for seperately) including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, Malkana, G.S.T., Toll Tax, Sales tax or any other taxes imposed by the Government.
133	Providing and fixing white vitreous china large flat back range of four half stall urinal no 60002 of size 39 x 37.5 x 59 cm (thirty nine into thirty seven point five into fifty nine centimeter) with 10 ltr. (ten litre) white PVC automatic flushing cistern of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required and necessary fittings complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, Malkana, G.S.T., Toll Tax, Sales tax or any other taxes imposed by the Government.
134	Providing and Fixing Charomium plated 40mm (forty millimetres) diameter steel pipe for grab bars at 78cm (seventy eight centimetres) height, M.S. plate as per details at the position of the seat and Wash Basin complete as per specification including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, Malkana, G.S.T., Toll Tax, Sales tax or any other taxes imposed by the Government.
135	Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern of Hindware , Cera ,Jaquar of star white / Snow white shade as shown in the drawing / as per details and C.P. flush bend with fittings and C.I. brackets, 40 mm (forty millimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, Malkana, Toll Tax, G.S.T Sales tax or any other taxes imposed by the Government.
136	Providing and fixing White Vitreous China Matric Flat back wash basin 550x 400 mm (five hundred fifty into four hundred millimeter) of Cera / Hindware / Jaquar of star white/snow white shade and as per detail with single hole for 15 mm (fifteen millimeter) C.P. brass pillar tap with C.I. brackets 32 mm (thirty two millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including necessary fittings complete and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
137	Providing and fixing ISI marked stainless steel kitchen sink With drain board of Diamond / Unik / big size 610x510 x 200mm (six hundred ten into five hundred ten into two hundred millimeters) of approved make with drain board and C.P waste with C.I or M.S brackets painted white including cutting holes in walls and making good the same complete as per Architectural drawing ,design and specifications including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
138	Providing and fixing 32 mm (thirty two millimeter) diameter M.I.union for Wash basin and sink including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, Toll Tax Sales tax, GST or any other taxes imposed by the Government.
139	Providing and fixing ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore P.V.C connection pipe with brass unions complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
140	Providing and fixing ISI marked Mixer for kitchen sink with casted swinging spout at top Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite and Hindon series of Jal including necessary fittings complete and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
141	Providing and fixing 32mm (thirty two millimeters) nominal diameters C.P waste for wash basin or sink complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
142	Providing and fixing two hole basin mixing Faucet of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite and Hindon series of Jal including necessary fittings complete and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
143	Providing and fixing 100mm (One hundred millimetre) diameter chromium plated grating of superior quality for floor, gully or nahani trap complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
144	Providing and fixing 75mm (seventy five millimetre) diameter chromium plated grating of superior quality for floor, gully or nahani trap complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
145	Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass of approved quality mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
146	Providing and fixing 600X20 mm (six hundred into twenty millimeter) C.P. brass towel rail of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite and Hindon series of Jal complete with C.P. brass brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
147	Providing and fixing plastic liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
148	Providing and fixing chromium plated brass toilet paper holder ISI marked of approved brand and manufacture of continental series of Jaquar/contessa series of Hindware including necessary fittings complete and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of royality, malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
149	Providing and fixing 8 mm (eight millimeter) diameter C.P. / S.S. Jet spray make of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite and Hindon series of Jal with flexible tube upto 1 (one) metre long with S.S.( stainless steel) triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of royality, malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
150	Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimeter) glass shelf of Continental series of Jaquar / Classic series of Hindware /Floral series of Cera / Vintag series of Kerovite and Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimeter) long screws, rawl plugs etcetera ., complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
151	Providing and fixing 15mm (Fifteen millimeters) nominal bore/diameters C.P. brass bib tap of OPAL PRIME (Single Lever) series of Jaquar/Fluid (Single Lever) series of Hindware/Ruby (Single Lever) series of Cera/or Oran (Single Lever) series of Kerovit ISI marked of approved quality (superior or heavy type) and colour confirming to IS: 8931 including necessary fittings complete and including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana,Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
152	Providing and fixing 15mm (fifteen millimeter) nominal bore CP brass stop cock of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal approved quality and colour confirming to IS: 8931including necessary fittings complete and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax,Sales tax, GST or any other taxes imposed by the Government.
153	Providing and fixing 15mm (fifteen millmeters) nominal bore C.P. brass angle valve for basin miner and geyser points of approved quality confirming to IS:8931 of continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite and Hindon series of Jal with necessary fittings complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana,Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
154	Providing and fixing 15 mm (fifteen millimeter) nominal bore, C.P, push cock of approved quality and colour complete of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite and Hindon series of Jal without nuts and pipes including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality charges, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
155	Providing and fixing 15mm (Fifteen millimeters) nominal bore brass full way valve with wheel of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite and Hindon series of Jal with necessary fittings complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
156	Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass ball valve (Horizontal plunger type) High pressure with polythene plastic floats of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite and Hindon series of Jal including necessary fittings and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
157	Providing and fixing 110mm (one hundred ten millimeter) diameter P.V.C single equal branch with oval access door ISI marked of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts including fixing with approved adhesive complete and including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
158	Providing and fixing 75mm (seventy five millimeter) diameter P.V.C single equal branch with oval access door ISI marked of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts including fixing with approved adhesive complete and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
159	Providing and fixing 110mm (one hundred ten millimeter) diameter P.V.C double equal branch with oval access door ISI marked of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts including fixing with approved adhesive complete and including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
160	Providing and fixing 75mm (seventy five millimeter) diameter P.V.C double equal branch with oval access door ISI marked of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts including fixing with approved adhesive complete and including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
161	Providing and fixing 110mm (one hundred ten millimeter) diameter PVC door bend with oval access door ISI marked of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3 mm (three millimeter) thick bolts and nuts complete including fixing with approved adhesive etcetera complete and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
162	Providing and fixing 75mm (seventy five millimeter) dia PVC door bend with oval access door ISI marked of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3 mm (three millimeter) thick bolts and nuts including fixing with approved adhesive etcetera complete and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
163	Providing and fixing 110mm (one hundred ten millimeter) diameter PVC offset 45° (forty five degree) ISI marked of Finolex / Relpipe (Relience) / Vectus including fixing with approved adhesive etcetera complete and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
164	Providing and fixing 75mm (seventy five millimeter) diameter PVC offset 45° (forty five degree) ISI marked of Finolex / Relpipe (Relience) / Vectus including fixing with approved adhesive etcetera complete and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
165	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI marked IS:12701 of Finolex / Relpipe (Relience) / Vectus having tripple layer of Supreme with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings and the base support for tank and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
166	Providing and laying cement concrete 1:5:10 (one Cement isto five Sand isto ten graded stone aggregate 40mm (forty millimeter) nominal size ) for the bedding of PVC. pipes of 150mm (one hundred fifty millimeter) internal diameters, including bedding , necessary form work and curing complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana,Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
167	Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. (reinforced cement concrete) top slab with 1:1.5:3 mix (one cement isto one and half coarse sand (zone- III) isto three graded stone aggregate 20 mm (twenty millimeter) nominal size) mix foundation concrete 1:4:8 (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm (forty millimeter) nominal size) mix inside plastering 12 mm (twelve millimeter) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm (twenty millimeter) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm (ninety into eighty centimeter) and 45 cm (forty five centimeter) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimeter) internal dimensions, total weight of cover and frame to be not less than 38 kg (thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg) (fifteen kilogram) With Sewer bricks conforming to IS : 4885 complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government
168	Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. (reinforced cement concrete) top slab with 1:1.5:3 mix (one cement isto one and half coarse sand (zone- III) isto three graded stone aggregate 20 mm (twenty millimeter) nominal size) mix foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm (forty millimeter) nominal size) mix inside plastering 12 mm (twelve millimeter) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm (twenty millimeter) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm (one hundred twenty into ninety centimeter) and upto any depth including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimeter) internal dimensions, total weight of cover and frame to be not less than 38 kg (thirty eight kilogram) (weight of cover 23 kg (twenty three kilograme) and weight of frame 15 kg (fifteen kilogram) With Sewer bricks conforming to IS : 4885 complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
169	Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:4 (one cement isto four coarse sand) C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimeter) internal dimensions, total weight of cover with frame to be not less than 38 kg (thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg fifteen kilogram), R.C.C. top slab with cement concrete 1:1.5:3 mix (one cement isto one and half Fine sand isto three graded stone aggregate 20 mm (twenty millimeter) nominal size), foundation concrete 1:5:10 (one cement isto five fine sand isto ten graded stone aggregate 40 mm (forty millimeter) nominal size), inside plastering 12 mm(twelve millimeter) thick with cement mortar 1:3 (one cement isto three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 455x610 mm (four hundred fifty five into six hundred ten millimeter) and 45 cm (forty five centimeters) deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) complete including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government
170	Providing and fixing 600mmx300mm (six hundred millimeter into three hundred millimeter) white vitreous china division plate for urinals of Hindware /cera/Jaquar of star white / snow white shade including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
171	Providing and fixing to wall, ceiling and floor 15mm (fifteen millimeter) nominal bore galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete as per HPPWD specifications including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
172	Providing and laying (to level or slope) 150mm (one hundred fifty millimeter) nominal bore/diameter PVC pipe grade 'A' and jointing with approved adhesive including testing of pipes and joints complete and carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
173	Excavating trenches of required width for pipes, cables, etcetera including excavation for sockets, and dressing of sides, ramming of bottoms upto any depth including getting out the excavated soil, and then returning the soil as required, in layers upto any depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus excavated soil as directed by Engineer-in-charge within all leads and lifts including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of Octroi, royality, malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government. . Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Himachal Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Library Building At Rehan, Tehsil Fatehpur, District Kangra (Hp) (Sh:- Construction Of Building Portion Including Water Supply And Sanitary Installation, Rain Water Harvesting, Saptic Tank, And Boundary Wall With Gate) Esti, Fatehpur-Himachal Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Library Building At Rehan, Tehsil Fatehpur, District Kangra (Hp) (Sh:- Construction Of Building Portion Including Water Supply And Sanitary Installation, Rain Water Harvesting, Saptic Tank, And Boundary Wall With Gate) Esti, Fatehpur-Himachal Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us